Barfeeder for CNC lathe

Kurt Breuning IRCO Maschinenbau PROFIMAT 50.8 / 196.8 / 3

Condition: used, Year of construction: 2004, Technical data: Kdodpfx Ajtzyx Tsh Nsg Main spindle: Max. turning diameter: 33 mm Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Slide travel Z1: 320 mm Slide travel X1: 50 mm Slide travel Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools stationary with tool shank 16 x 16: 5 pieces Slide 2: Slide travel X2: 165 mm Slide path Z2: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine - 5-pos. tool carrier plate for slide 1 - Electrical interface and software for bar loading magazine - Collet chuck holder for main and pick-up spindle - 2 Double drill holder for rear machining support with cylinder - Pick-up spindle workpiece pusher

Condition: good (used), Year of construction: 1997, Parts shown by hand not come. Kdjdpfx Ahjpy Erro Njg

Year of construction: 1998, condition: like new (used), 65 Watt YAG laser Kdjdpfed Dhw Nex Ah Nsg

Year of construction: 2015, condition: ready for operation (used), A CNC double-spindle lathe Traub overhauled in 2025 is available. Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12938h. Including chip conveyor and bar loader LNS Quick Load. Documentation available. On-site inspection is possible. Kedpfx Ahev Scrbs Nodg

Condition: good (used), Year of construction: 2009, feed length X-axis: 6,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 1,500 mm, controller model: HAIDENNAIN, workpiece length (max.): 6,000 mm, workpiece width (max.): 2,500 mm, table width: 6,000 mm, table length: 2,500 mm, Portal milling machine with 5-axis head Ksdovcqybjpfx Ah Nodg

Condition: used, Cnc multispindle lathe INDEX MS 32 C Kdedpfxsuhaqbo Ah Njg

Condition: new, Year of construction: 2025, The front-opening sandblasting booth is a significant convenience for large and heavy workpieces. Telescopic actuators mounted in the door facilitate opening. As a standard, the sandblaster has a built-in dust extractor generated during sandblasting. Equipped with a set of nozzles, a gun and protective stickers for the visor. Kodpfxsm Ncb Eo Ah Nsdg Machine description Dust-free operation of the device is ensured by the use of circumferential gaskets, which allows you to perform work in an environmentally friendly manner. The sandblasting hose is placed in the lower part of the collection container. Drain hole allows quick change of blasting material. The sand blaster is used for cleaning and processing various types of surfaces, e.g. removing rust, paint, deposits from metal surfaces, e.g. automotive parts, engines, fittings, housings, wheels, rims, etc. The following can be used as an abrasive: , silicon, glass beads, plastic sand, emery and other materials. KDP350TOP technical parameters WORKING CAPACITY 330L (0.33m3) OPERATING PRESSURE 4 - 8 bar AIR CONSUMPTION 400 - 700 l/min AIR CONNECTION 1/4" (INCH) QUICK RELEASE VIEW AREA 580x270mm DRAIN CONNECTION fi 63mm and 90mm CAB INTERNAL DIMENSIONS (Width x Depth x Height lowest/highest point) 890 x 655 x 360/610 mm DIMENSIONS 960x720x1500mm WEIGHT 64 kg Standard equipment DC15 cyclone exhaust Working field lighting - 12 V fluorescent lamp with 230 V power supply with switch 2 high-quality work gloves made of rubber, integrated with the device 2 suction (vent) connections with a diameter of 64 mm and 90 mm for connecting a suction device Sand blasting gun with eight replaceable ceramic nozzles 4 pieces of replaceable protective film for the window, viewfinder front door with rubber perimeter seals for dust-free operation Manual in Polish We kindly inform you that the device requires self-assembly. We kindly inform you that the device requires self-assembly. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 810 mm, turning diameter over cross slide: 800 mm, turning diameter: 320 mm, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, CNC FANUC MSX-701 / MAPPS IV CAPACITY Swing diameter over bed: mm 800 Swing diameter over cross slide: mm 800 Maximum turning diameter: mm 320 Standard turning diameter: mm 200 Maximum distance between the center: mm 1.130 Maximum turning length: mm 810 Maximum workpiece size: mm 300 TRAVELS X axis turret 1 and 2: mm 210 Y axis turret 1 and 2: mm +65 / -45 Z axis turret 1 and 2: mm 810 B axis headstock 2: mm 920 MAIN SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Kodpfxowlvlgj Ah Nsdg Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 SUB SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 FEED DRIVES Rapid traverse turret 1 X/Y/Z: m/min 30/20/50 Rapid traverse turret 2 X/Y/Z: m/min 30/20/50 TOOL TURRET Number of turrets: 2 Number of tool stations per turret: 16 Shaft cross – section for turning tools: mm 20 x 20 Maximum shaft diameter for boring bars: mm 32 Turret switching time (1 station): s 0,18 Maximum speed of the driven tools: rpm 6.000 Drive power for driven tools (5 min/continuous operation): kW 7,5/5,5 DIMENSIONS Installation area with chip conveyor: mm 5.120 x 2.720 Net weight: kg 8.300 Macchina equipped with: • High pressure cooling system • Bar loader interface • Gantry-type piece unloading arm • Cutting effort management system and load monitor • No. 1 double radial motorized tool holder • No. 3 axial motorized tool holders • No. 2 external tool holders • No. 2 double boring bar holders • No. 2 single radial motorized tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centering chucks diam. Mm 210 • No. 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration Year of manufacturing: 2010

Condition: used, Year of construction: 2008, Swing over bed 923,8 mm Swing over cross slide 755 mm Max. turning diameter 356 mm Max. turning length 510 mm X/Z-axis movement 260/590 mm Turret w/12 stations Spindle speeds 5000 rpm Kedpfx Ahju Sn Hze Nodg Spindle bore 73 mm Control: MSX-850 III Equipped with: Collet chuck w/collets Chip conveyor 3 standard tool holders No Gantry loader incl.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, center height: 150 mm, total length: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle in the X-axis. All assemblies are restored to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry: The machine is completely dismantled down to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the X and Z axes are scraped by hand and restored to as-new condition. After completion, the machine receives a measurement report in accordance with the manufacturer's specifications. Painting: Once the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are stripped of old paint, cleaned and repainted. Hydraulics: Kdodpfjurw Uyox Ah Njg The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional internal cylindrical grinding machine TSCHUDIN HTG 610I Equipment of the machine: Technical data: Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Weight and space requirement of the machine: 2500kg // 2340x1445x1900 mm Machine equipment (standard): 1 pc. Workpiece headstock MK5 1 pc. Control panel 1 pc. Holder for internal grinding spindle 1 pc. Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1 pc. Hydraulic unit Optional: - Digital measuring system 2-axis - Freely adjustable speed (1-800 rpm) incl. soft start (higher speeds are optionally possible after clarification of technical details) - Separate low speed for part alignment