Used Ball Header for sale (3,295)

Year of construction: 2016, condition: good (used), Approx. 20 transport carts / storage carts, Fetra – used: Price per unit ex works: €95.00 (net)! Price for purchasing all 20 units: only €1,500.00 (net) ex works! Manufacturer: Fetra Type: 2102 Year of manufacture: varies, e.g., 2016 / 2017 Dimensions: approx. depth 1m, width approx. 70cm Load capacity: 400kg Weight: approx. 29kg Mostly with clipboard New price: approx. €235.00 Total load capacity (kg): 400 Wheel size (mm): 160 Tires: TPE Loading area height (mm): 233 Usable area length (mm): 1000 Usable area width (mm): 700 Overall length (mm): 1180 Overall width (mm): 705 Overall height (mm): 953 Transport cart made of steel tube welded construction, powder-coated brilliant blue RAL 5007. Platform made of wood composite board, surface with beech decor. 2 swivel and 2 fixed casters, TPE tires, hubs with ball bearings. Parking brake on the swivel casters. Condition: good Kjdez Dthwspfx Ah Ejdt Available: Location: Hamburg

Condition: used, Year of construction: 2005, operating hours: 11,100 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 380 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 530, table load: 300 kg, rotary table diameter: 630 mm, overall weight: 4,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 16, Equipment: chip conveyor, documentation/manual, The machine is still in operation and can be tested while powered. Available from approximately December 2026. At approximately 10,000 spindle operating hours, the spindle was re-bearinged, and the ball screws in the X, Y, and Z axes were replaced. Includes Heidenhain probe. Tool holder: SK 40. The zero-point clamping plate shown on the table will be removed and is not included in the sale. Ksdpfxez Damto Ah Eedt

Year of construction: 1973, condition: used, Cement Ball Mill Brand: Polysius Type: Ball Mill Capacity: 100 tph OPC Diameter: 4000 mm Length: 13500 mm Number of chambers: 2 Manholes: 2 Drive system: Indirect drive Mill bearing system: Trunnion bearing Lubrication units for bearings: Included Kjdpfxegq Daqs Ah Eedt Scope of Supply: - Mill shell - Mill bearings with housing - Feeding chute with support frame - Mill inlet fresh air flap - Mill outlet hood - Pendulum flap for discharge hopper - Lubrication system units for mill inlet and outlet bearing - Liners and diaphragms - Auxiliary drive with motor, gearbox, and coupling - Girth gear between gearbox and ball mill - Couplings between motor and gearbox - Main gearbox (2x) - Main motor (2x) - Bucket elevator - Weigh feeders (3x) Spare Parts - Reserve gearbox 1450 kW Upon request, a video of the mill can be provided.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: M08L/9171, Offer Number: M08L/9171 Machinetype: 5 die - 5 blow transfer header Info: bushing cut-off Make: HATEBUR Type: AKP 3-5 Constr. year: 1990 diameter range: 14 mm number of dies: 5 Kdsdpfxezzw Swe Ah Ejt number of stations: 6 cutting length: 90 mm shaft length under head: 6-90 mm press power: 85 to output - pieces/min: 150-210 Location: In our warehouse

Condition: used, Year of construction: 1990, functionality: fully functional, Updated Electrics Scrap Conveyor Kdedpfx Ajzt S Uwoh Est 2 Plane Straightener Multi Checker Unit

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 750 h, power: 9 kW (12.24 HP), input voltage: 430 V, number of axes: 4, number of slots in tool magazine: 10, controller manufacturer: Yaskawa, total height: 800 mm, table length: 4,000 mm, table width: 2,000 mm, Machine purchased from the manufacturer Plot Electronic in 2016. Used for milling models and molds in materials: MDF, polyurethane. In 2022 it was upgraded with the addition of a 4th axis and an oscillating head. Full technical specification of the machine: - Stable welded construction with an annealed gantry made in hybrid monolith technology - Mechanics – linear guides, ball carriages - Helical rack and pinion system - Spindle with tool changer, 9kW, ISO 30, ER 32 - Linear tool magazine holds 10 tools Ksdezxqtpepfx Ah Eodt - Drives – AS servo drives - CNCGraf control module in Polish - Simulation possible before machining, real-time cutting visualization - Material height sensor - Tool length sensor - Spindle cooling system – compressed air - Control cabinet with computer and keyboard - Vacuum table - T3000K oscillating head - 4th rotary axis on a tailstock, mountable on the table - Spindle speed control system

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Kjdpfxjzxzags Ah Eodt Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Maximum slide speed in the Y-axis: 73 m/min Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Station C – max. diameter 50.8 mm: 2 pcs Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves).

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M20I/9019, Offer Number: M20I/9019 Machinetype: rivet header Make: Carlo Salvi Type: RF/635/SV Constr. year: 1985 diameter range: 3-6,35 mm shaft length under head: 65 mm cutting length: 87 mm Ksdpfewzknuox Ah Eodt output pieces/min: 360 Location: Germany

Condition: refurbished (used), Year of construction: 2006, SACMA SP260 Number of dies: 5 Heading tonnage: 650 KN Maximum cutoff diam 500N/mm²: 10,5 mm. Kdsdszba T Ejpfx Ah Ejt Max. cutoff length: 85 mm. Kickout stroke die max.: 65 mm. Kickout stroke punch max.: 20 mm. Speed pcs. per minute: 275

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: M08L/8716, Offer Number: M08L/8716 Machinetype: 7 die - 7 blow warm forming header Info: bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer Make: NATIONAL FORMAX PLUS Type: FXP57S WF Constr. year: 2016 diameter range: 8,5-22 mm Kdsdjwi Sulepfx Ah Eet number of dies: 7 number of stations: 8 cutting length: 4-67 mm shaft length under head: 4-75 mm output - pieces/min: 175 press power: 200(126) to max. outside dia. of round pie: 42 mm stroke: 150 mm Location: In our warehouse

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: M08I/8941, Offer Number: M08I/8941 Kdodpfx Aewi Td Ioh Ejt Machinetype: 2 die - 2 blow transfer header Make: SACMA Type: SP22 Constr. year: 1976 diameter range: 10 mm number of dies: 2 number of stations (incl. cut off): 3 cutting length: 110 mm shaft length under head: 100 mm output - pieces/min: 170 Location: Germany

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: M06L/8006, Offer Number: M06L/8006 Machinetype: double blow header Make: Carlo Salvi Kedpfx Ahswi Scpo Esdt Type: 476SV Constr. year: 1980 diameter range: 2-4,76 mm shaft length under head: 46 mm max. cut-off length: 60 mm output pieces/min: 470 Location: In our warehouse

Year of construction: 2012, condition: excellent (used), functionality: fully functional, machine/vehicle number: A0008858, Used Verderer VA25S-A01AS2SSSSPTPT Air-Operated Double Diaphragm (AODD) pumps with stainless steel configurations., serial number: A0008858; year of manufacture: 2012. Very good condition The specific arrangement code you provided (VA25S-A01AS2SSSSPTPT) designates a heavy-duty metallic pump constructed with a Stainless Steel fluid section, Stainless Steel seats, and PTFE (Teflon) balls and diaphragms, and defines a heavy-duty, highly corrosion-resistant configuration of the Verderair VA 25 Air-Operated Double Diaphragm (AODD) pump. This specific model is typically engineered to handle aggressive chemicals, strong acids, solvents, and high-temperature fluids The operating limits and physical profile for the Verderair VA 25 SS SS TF TF include the following parameters: Connection Size (Liquid):1" BSP or NPT (Threaded) Connection Size (Air): 1/2" NPT Maximum Flow Rate: 189 liters per minute (50 GPM) Maximum Discharge Pressure: 8.6 bar (125 PSI) Maximum Fluid Temperature: 104°C (220°F) Limited by the PTFE components Maximum Suction Lift (Dry): 3.0 to 4.9 meters Maximum Suction Lift (Wet): 6.0 to 8.8 meters Maximum Particle Size: 3.2 mm (Solids handling capacity) Pump Weight: approx. 16.5 to 18.8 kg (heavy due to full-metal construction) Certifications: ATEX certified (safe for explosive atmospheres) Dimensions: L 470 mm x W 250 mm x H 360 mm SS (Fluid Section): 316 Stainless Steel housing and manifolds. Provides high chemical resistance and mechanical durability; SS (Air Section / Check Valve Seats): Depending on the generation, this represents a heavy-duty Stainless Steel center air section or Stainless Steel valve seats. It avoids the corrosion or cracking risks associated with aluminum or plastic components in harsh environmental conditions; TF (Check Valve Balls): PTFE (Teflon) check balls. Ensures a tight seal and broad chemical compatibility during cycling; TF (Diaphragms): PTFE (Teflon) diaphragms (typically backed by an EPDM layer for flexibility). PTFE offers the highest level of universal resistance to corrosive fluids; Price 2.490 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Kjdpfsz Abcpsx Ah Eedt Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08L/8001, Offer Number: M08L/8001 Kodpjwi S Rajfx Ah Esdt Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off , PKO in 2nd and 3rd Make: ASAHI OKUMA Type: ORH120 Constr. year: 1988 diameter range: 14 mm number of dies: 2 number of stations (incl. cut off): 4 cutting length: 100 mm shaft length under head: 90 mm output - pieces/min: 100 press power: 120 to Location: In our warehouse

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: M08E/9110, Offer Number: M08E/9110 Machinetype: 2 die - 3 blow transfer header Kjdpoyya Rpjfx Ah Eedt Make: NAKASHIMADA Type: NP80 Constr. year: 1992 diameter range: 10 mm number of dies: 2 number of stations (incl. cut off): 4 cutting length: 100 mm shaft length under head: 80 mm output - pieces/min: 150 press power: 60 t Location: Europe

Condition: ready for operation (used), G & N Kugelmüller MPS 1 / Cup grinding machine from a university - Spindle speed approx. 3150 rpm - Grinding height above magnet approx. 130 mm - Magnet plate 200x100 mm - Lateral grinding wheel retraction mechanism Kdodpfx Aozn Rcpeh Ejt - Fine feed adjustment - Drive motor 0.6 kW - Machine enclosure - Documentation Dimensions: L x W x H 0.8 x 0.7 x 1.6 meters / Weight approx. 200 kg Errors and omissions excepted.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: M08I/9171, Offer Number: M08L/9171 Machinetype: 5 die - 5 blow transfer header Info: bushing cut-off Make: HATEBUR Type: AKP 3-5 Constr. year: 1990 diameter range: 14 mm number of dies: 5 number of stations: 6 cutting length: 90 mm shaft length under head: 6-90 mm press power: 85 to output - pieces/min: 150-210 Location: Germany Kodpfjzwqndsx Ah Eodt

Condition: like new (used), Year of construction: 2019, functionality: fully functional, The discharge conveyor from Trio Technik is available for sale and has the following details: Length: 700 mm Clear width: 410 mm Conveyor belt in blue, temperature-resistant up to 80°C, without cleats Belt speed (constant): 9 m/min Kdjdpfx Aswtfikjh Est Without support legs Guide plate: 60 mm high

Condition: used, Year of construction: 1983, max. wheel diameter 80 / 124 mm Ksdpfoz Dk Afjx Ah Eedt gear width 150 mm max. module 2 min. module 0,3 turning speeds 210 - 1680 U/min min. number of teeth 6 total power requirement 2,2 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 1,5 x 1,8 m Top condition.

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system Kjdjz Df Txjpfx Ah Eodt - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Kdjdpfx Ajx Twdyoh Eet

Condition: used, Year of construction: 2020, Edge banding machine K36, 1 unit, with PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece; rabbeting cutter (incl. DIA tool) up to 3 mm cutting depth; glue reservoir with quick-change reservoir preparation, incl. adhesive dispensing device; high-frequency miter saw station (approx. 16,000 rpm); high-frequency milling station (approx. 16,000 rpm with separate pneumatic milling adjustment); corner rounding cutter (min. workpiece length 300 mm, max. workpiece height 40 mm); radius cutting blade; flush cutting blade (incl. pneumatic extraction); cleaning station; 1 free space for a 2nd milling station or a slot cutting saw (slot cutting saw only if the cleaning station is removed); robust chain drive, ball-bearing mounted double roller pressure pad, viewing window from the rear of the machine, extendable workpiece support, signal lamp for workpiece sequence. Technical data: Max. edge thickness: 3 mm Max. rabbet thickness: 3 mm Min. workpiece height: 8 mm Max. workpiece height: 60 mm Max. rabbet height: 40 mm Min. workpiece length: 160 mm Feed rate: approx. 10 m/min Ready for operation: approx. 5 min. Power consumption: (400V – 3Ph – 50 Hz) Working height: approx. 900 mm Machine dimensions: approx. 5250x1250x2050 mm (L x W x H) Weight: approx. 1700 kg Dust extraction nozzle: 1x140 mm + 1x80 mm Kdsdpfxezvhk He Ah Est 8 mm version K36, 1 unit, quick-change fitting for corner milling cutter K36, 1 unit, extra charge for multi-radius cutting blade (R2/R1) K36, 1 unit, rabbeting up to 60 mm workpiece thickness K36, 1 unit, release agent spray device, plate K36, 1 unit, cleaning agent spray device, plate K36, 1 unit, nesting for milling station K36, 1 unit, nesting for radius cutting blade K36, 1 unit, pneumatic 3-point adjustment K36, 1 unit, Airtronic K36, 1 unit, extension of the support in the infeed and outfeed by 440 mm each; 1 unit. With the help of the plug-in extension of the infeed and outfeed of the table extension, Hebrock offers a solution for an enlarged support surface for improved workpiece handling by 450 mm. Level monitoring without reservoir, 1 unit. Thanks to a sensor on the top of the glue application roller, the operator can be shown a minimum glue level. A warning is displayed on the screen. Once this warning appears, a maximum panel processing length of 100 m (19 mm chipboard) is possible. Ball bearing for corner rounding cutter, 24.1 mm, 1 unit Ball bearing for corner rounding cutter, 24.2 mm, 1 unit Packaging surcharge, 1 unit Additional quick-change reservoir incl. level sensor Manufacturer: Hebrock Type: 36/14/1 Article No. H36/14/1, 1.0 unit Additional change motor for corner milling cutter K36 Manufacturer: Hebrock Type: 36/08/2 Article No. H36/08/2, 1.0 unit R1 Location: Supplier

Condition: good (used), Year of construction: 2004, operating hours: 16,651 h, functionality: fully functional, machine/vehicle number: M342-06204054DFA, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, feed length X-axis: 760 mm, feed length Y-axis: 510 mm, feed length Z-axis: 610 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 18 kVA, torque: 236 Nm, controller manufacturer: Hurco, controller model: Ultimax 4, workpiece length (max.): 1,020 mm, workpiece width (max.): 510 mm, workpiece height (max.): 610 mm, workpiece weight (max.): 750 kg, total height: 2,700 mm, total length: 280 mm, total width: 2,300 mm, table width: 510 mm, table height: 850 mm, table length: 1,020 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 4,500 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 6 bar, spindle nose: Steilkegel Gr. 40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Excellent condition: Hurco VMX 30 with extremely low operating hours! For sale is a very well-maintained, vertical 3-axis machining center, a Hurco VMX 30, manufactured in 2004. The machine is in exceptionally good condition for its age. As can be easily seen from the operating hours, the machine has only been used very little by us. It was used exclusively for light-duty operation/toolmaking and was not subjected to heavy series production. The mechanical components (guideways, ball screws, and spindle) are correspondingly only slightly worn and offer high precision. The machine is equipped with the popular Ultimax 4 dual-screen control system, which is highly regarded worldwide for its extremely fast and easy dialog programming directly on the machine. Kdjdpfxszudd To Ah Eet

Condition: new, Year of construction: 2026, The ball mill is ideal for mineral ores. Kdjdpfxjpahwvs Ah Ejt

Condition: ready for operation (used), Year of construction: 2021, operating hours: 6,274 h, pressing force: 6 t, total height: 2,580 mm, controller manufacturer: DELEM, controller model: DA-66T, product length (max.): 2,100 mm, number of axes: 6, This 6-axis ERMAKSAN Speed-Bend Pro 1270x60 was manufactured in 2021. It features a bending force of 60 t and a bending length of 1270 mm. The CNC-controlled backgauge includes X-axis travel of 500 mm and R-axis travel of 250 mm, ensuring precise operations. If you are looking to get high-quality bending capabilities, consider the ERMAKSAN Speed-Bend Pro 1270x60 press brake we have for sale. Contact us for further details. • CNC axes: Y1, Y2, X, R, Z1, Z2 • Bending unit: • Max. approach speed: 160 mm/s • CNC backgauge: • CNC-controlled axes: X, R, Z1, Z2 • X-axis travel: 500 mm • X-axis speed: 500 mm/s • R-axis travel: 250 mm • R-axis speed: 350 mm/s • Servo-motorized CNC backgauge • X-axis servo motor with ball-screw drive • Z1 and Z2 CNC-controlled backgauge fingers • Backgauge positioning accuracy: up to 0.05 mm • Safety: • Side safety guards • Safety system for bending area • Tooling style: Amada (Promecam) • Electrical: Kdsdpez A Aa Tofx Ah Eot • Main motor power: 7.5 kW • Power supply: 400 V, 3-phase, 50 Hz • Nominal current: 18 A • Control voltage: 24 V Additional equipment • Segmented upper punch tooling • Multi-V lower die • Front sheet support table / support arms • Foot pedal control Technical Specification Bending Length 1270 mm