Used Ballas for sale (25)

Condition: used, Year of construction: 1987, machine/vehicle number: 1815, functionality: fully functional, power: 5.5 kW (7.48 HP), Mortise and tenon machine with stop, control panel on top, electric feed, year of manufacture 1987, Hsdpfxozizipe Agtont 4 speeds: 3000/4500/6000/9000 rpm with reversible motor, star-delta starter, clockwise/counterclockwise rotation, emergency stop switch.

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, power: 7.3 kW (9.93 HP), input voltage: 400 V, roller diameter: 700 mm, total height: 2,270 mm, total width: 800 mm, overall weight: 500 kg, table height: 900 mm, Equipment: motor brake, robust band saw BSM 700, manufacturer FAMA, Hsdpezizu Sefx Agtent year of manufacture 1983, 7.3 kW motor, foot brake, band length 5,150 mm.

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, Compact combination machine with 5 functions: sawing, milling, surfacing, thickness planing, and long-hole drilling. Sliding table, 800 mm; max. saw blade 315/100 mm cutting height; milling cutter, 3 speeds; surfacing and thickness planing, 310 mm; long-hole drilling support; year of manufacture 2002; 3 kW motors; mobile base. Hodsziz E Ropfx Agtont

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 10024031, overall weight: 197 kg, total length: 1,200 mm, total width: 800 mm, total height: 1,970 mm, power: 4.8 kW (6.53 HP), Equipment: refrigerant dryer, type plate available, Stationary piston compressor with refrigeration dryer, fine filter, condensate treatment unit for oil-water separation, and automatic condensate drain, 270 l tank, robust design and top quality, fully automatic on/off operation. Equipped with all safety devices, completely ready for connection. From 7.5 kW upwards, standard equipment includes an automatic star-delta switch. Fifteen-year guarantee against rust penetration on the internally and externally hot-dip galvanized compressed air tank. Hnodpfjzin Skox Agtjt Air outlet tank 3/4", air outlet refrigeration dryer 3/8", filling capacity approx. 520 l/min, automatic condensate drain AMD on the tank, automatic condensate drain in the refrigeration dryer, article number 2024712KK, recommended retail price: €4,049.00

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demonstration machine, few operating hours. 3.7 kW motor for high material removal rate, robust design, suitable for continuous commercial use. Steel drums with hard rubber coating for perfectly flat, smooth surfaces. Hjdpeziw Afsfx Agtjnt Independently adjustable rear drum for controlled material removal. Two-stage feed gearbox for adaptation to different types of wood. Heavy-duty feed table made of gray cast iron, precisely guided by four spindles. Drum hood with double dust extraction connection and guide plates for efficient dust removal. Digital height indicator for quick and safe adjustment to the desired dimension. Abrasive belts with 75 mm and 100 mm width can be used. Technical data Feed motor: 0.18 kW Scope of delivery 80 grit abrasive belt mounted on the drum 100 grit abrasive belt mounted on the drum Height crank, operating manual and spare parts list.

Condition: as good as new (ex-display), Year of construction: 2025, power: 7 kW (9.52 HP), input voltage: 400 V, cutting height (max.): 136 mm, cutting width (max.): 900 mm, saw blade diameter: 400 mm, height adjustment type: electric, overall weight: 690 kg, Equipment: saw blade guard, scorer, Exhibition machine; Art. No. 5504933 with special equipment; fence frame with CompeX device, digital display for width stop. Holzkraft minimax si 4 - 400 / 32 M A, manufacturer SCM Group, Hnjdpfxsziwz Ue Agtet Cutting length 3200 mm, cutting height 136 mm, saw blade 400 mm, 7.0 kW motor, scoring saw with its own motor, motorized height adjustment and pivoting of the saw unit. Saw blade speed adjustable in two stages, on/off switch integrated in the sliding carriage, practical saw blade pendulum guard.

Condition: excellent (used), - Dimensions: 2480x1000x1450 mm - Year: 2006 - Packaging material: PVC, polyolefin, polyethylene, polypropylene - Maximum product length: 680 mm - Maximum product height: 220 mm - Product weight: 0.25–10 kg - Maximum roll diameter: 600 mm - Sealing arm dimensions: 490 x 390 mm Hnodpfswyc Udox Agtst - Voltage: 400V - Weight: 360 kg - Overhauled equipment: The machine is prepared upon order; collection and return times are arranged at that moment (please request the price after overhaul).

Condition: used, axle configuration: > 3 axles, first registration: 05/2000, total length: 13,800 mm, total width: 2,550 mm, total height: 1,560 mm, suspension: air, color: red, Year of construction: 2000, = Additional options and accessories = - Air suspension = Notes = For sale: Mol Ballast trailer. Robust and reliable 4-axle trailer for transporting vehicles or heavy equipment. Ready for immediate use. Trailer details: • Brand: MOL Ballast trailer • First registration: 24-05-2000 • Number of axles: 4 • Number of steering axles: 2 • Number of wheels: 8 Weights: • Maximum permitted weight: 62,000 kg • Unladen weight: 9,800 kg • Axle load per axle: 10,000 kg Tyres: • Tyre size: 445/65R22.5 • Number of tyres: 8 Dimensions: • Length: 13,800 mm Hnjdpoyt Rgaofx Agtst • Width: 2,550 mm • Height: 1,560 mm Application: • Suitable for heavy-duty transport • Sturdy 4-axle design The trailer is ready for use. Viewing by appointment possible. Contact us for more information or pricing. = Further information = Axle configuration: Suspension: Air suspension Rear axle 1: Tyre tread left: 40%; Tyre tread right: 40% Rear axle 2: Tyre tread left: 60%; Tyre tread right: 60% Rear axle 3: Steered; Tyre tread left: 80%; Tyre tread right: 80% Rear axle 4: Steered; Tyre tread left: 40%; Tyre tread right: 40% Weights: Unladen weight: 9,800 kg Payload: 52,200 kg Gross vehicle weight: 62,000 kg Financial information: Price: On request Further information: Please contact Gerrit Haverhoek for more details.

Condition: used, maximum load weight: 14,740 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2017, next inspection (TÜV): 09/2028, Year of construction: 2017, Internal vehicle number: G300411 Available immediately at our location in Kaufungen. For more information, please contact: Hedpfx Agsykf Ugotont * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Unladen weight: 3,260 kg Subject to errors and omissions. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 11,600 kg, permissible axle load (axle 2): 11,600 kg, permissible axle load (axle 3): 11,600 kg, first registration: 10/1999, loading space length: 12,800 mm, loading space width: 2,550 mm, loading space height: 2,600 mm, total length: 12,800 mm, total width: 2,550 mm, suspension: air, tire size: 275/70-R22.5, wheelbase: 7,830 mm, color: other, Year of construction: 1999, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS (Electronic Braking System) - Drum brakes - Central lubrication system = Notes = Nice 1999 NOOTEBOOM OVB-73-04 4-axle BALLAST TRAILER, axles 2, 3, and 4 are hydraulically steered, BPW axles with drum brakes, hardwood floor, 2 x 10 stake pockets + 13 stakes, 2 x 5 tie-down points, central lubrication system, 3.5" kingpin, hydraulically suspended. Unladen weight: 13,380 kg, permissible total weight: 71,400 kg, dual air tires with 275/70 -R22.5 tires (L: 10/10, 13/6, 9/6, 9/10mm; R: 5/14, 12/11, 12/12, 11/11mm), Belgian registration with valid technical inspection until [date]. = Further Information = Hodpfszxgdksx Agtsnt Axle configuration Tire size: 275/70-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; Max. axle load: 11,600 kg; Tire tread depth left inside: 62%; Tire tread depth left outside: 62%; Tire tread depth right inside: 88%; Tire tread depth right outside: 32% Rear axle 2: Dual tires; Max. axle load: 11,600 kg; Steered; Tire tread depth left inside: 81%; Tire tread depth left outside: 38%; Tire tread depth right inside: 69%; Tire tread depth right outside: 75% Rear axle 3: Dual tires; Max. axle load: 11,600 kg; Steered; Tire tread depth left inside: 32%; Tire tread depth left outside: 56%; Tire tread depth right inside: 75%; Tire tread depth right outside: 75% Rear axle 4: Dual tires; Max. axle load: 11,600 kg; Steered; Tire tread depth left inside: 62%; Tire tread depth left outside: 56%; Tire tread depth right inside: 63%; Tire tread depth right outside: 68% Weights Unladen weight: 13,380 kg Payload: 59,940 kg GVWR (Gross Vehicle Weight Rating): 71,400 kg Functional Body brand: Nooteboom OVB-73-04 Maintenance, History, and Condition APK (Technical Inspection): valid until 03/2027 Technical condition: good Optical condition: good Identification License plate: QATG848 Further Information Please contact Arne Honingh for further information.

Condition: used, maximum load weight: 24,500 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 01/1995, Year of construction: 1995, Equipment: ABS, BABELSBERGER SSA 51 SAF AXLE BALLAST 14 TIRE SETS 1ST HAND? ----VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT * TYPE: SSA 51 / 124/1 * BALLAST TRAILER * 3 AXLES * DRUM BRAKES * AIR SUSPENSION * 14 TIRE SETS * LOAD SECURING LASHING POINTS * TIRE SIZE: 445 / 65 R 22.5 * PERMISSIBLE TOTAL WEIGHT: 34,000 KG * UNLADEN WEIGHT: 9,500 KG * PAYLOAD: 24,500 KG * IMMEDIATELY READY FOR USE * EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ * EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ ----EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS REGISTRATION, AND 17 - 21 DAYS AUSTRIA REGISTRATION EURO 1 VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Hsdpotvt A Tefx Agtsnt Subject to changes, errors and prior sale! You can find more vehicles on our website: Sales are made exclusively according to our general terms and conditions – see website. Important note – important information: Despite careful checking of all details in our offer, it may happen that errors occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 11,600 kg, permissible axle load (axle 2): 11,600 kg, permissible axle load (axle 3): 11,600 kg, first registration: 10/1999, loading space length: 12,800 mm, loading space width: 2,550 mm, loading space height: 2,600 mm, total length: 12,800 mm, total width: 2,550 mm, suspension: air, tire size: 275/70-R22.5, wheelbase: 7,830 mm, color: other, Year of construction: 1999, Equipment: ABS, = Additional Options and Accessories = Hedpezxgc Tsfx Agtent - BPW axles - Drum brakes - Central lubrication system = Notes = Beautiful 1999, 4-axle NOOTEBOOM OVB-73-04 dump trailer. Axles 2, 3, and 4 are hydraulically steerable. BPW axles with drum brakes, hardwood floor, 2 x 10 stakes, 2 x 5 lashing points, central lubrication system, 3.5" kingpin, hydraulically sprung. Unladen weight: 12,360 kg, permissible total weight: 71,400 kg (technically 89,250 kg), twin tires at the rear with tires of size 275/70-R22.5 (tread depth left: 11/15, 13/9, 11/13, 11/10 mm; tread depth right: 10/12, 12/13, 13/13, 10/11 mm), Belgian registration with a valid technical inspection until 01.12.2026. = Additional Information = Axle configuration Tire size: 275/70-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Max. axle load: 11,600 kg; Tire tread depth left (inside): 95%; Tire tread depth left (outside): 70%; Tire tread depth right (inside): 75%; Tire tread depth right (outside): 60% Rear axle 2: Twin tires; Max. axle load: 11,600 kg; Steerable; Tire tread depth left (inside): 55%; Tire tread depth left (outside): 80%; Tire tread depth right (inside): 80%; Tire tread depth right (outside): 75% Rear axle 3: Twin tires; Max. axle load: 11,600 kg; Steerable; Tire tread depth left (inside): 80%; Tire tread depth left (outside): 70%; Tire tread depth right (inside): 80%; Tire tread depth right (outside): 80% Rear axle 4: Twin tires; Max. axle load: 11,600 kg; Steerable; Tire tread depth left (inside): 60%; Tire tread depth left (outside): 70%; Tire tread depth right (inside): 70%; Tire tread depth right (outside): 60% Weights Unladen weight: 12,360 kg Payload: 59,038 kg GVW: 71,400 kg Functional Body brand: Nooteboom OVB-73-04 Maintenance, History, and Condition APK (Technical Inspection): valid until 12/2026 Technical condition: very good Optical condition: very good Additional information Please contact Arne Honingh for further information.

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 11,600 kg, permissible axle load (axle 2): 11,600 kg, permissible axle load (axle 3): 11,600 kg, first registration: 07/2001, loading space length: 12,800 mm, loading space width: 2,550 mm, loading space height: 2,600 mm, total length: 12,800 mm, total width: 2,550 mm, suspension: air, tire size: 275/70-R22.5, wheelbase: 7,830 mm, color: other, Year of construction: 2001, Equipment: ABS, = Additional Options and Accessories = - BPW axles - Drum brakes - Central lubrication system = Notes = Beautiful 2021 Nooteboom 4-axle dump trailer, model OVB-73-04, axles 2, 3, and 4 hydraulically steered, BPW axles with drum brakes, hardwood floor, 2 x 10 stakes, 2 x 5 lashing points, central lubrication system, 3.5" kingpin, hydraulically suspended, unladen weight: 12,220 kg, permissible total weight: 71,400 kg (technically 89,250 kg), twin tires on the rear axle with tires of size 295/80 -R22.5 (tread depth left: 13/10, 10/10, 17/12, 15/12 mm; tread depth right: 13/12, 10/130, 10/17, 4/5 mm), Belgian registration with a valid main inspection until 08.09.2027. = Further Information = Axle configuration Tire size: 275/70-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Max. axle load: 11,600 kg; Tread depth left inner: 95%; Tread depth left outer: 70%; Tread depth right inner: 75%; Tread depth right outer: 60% Hedpfx Agezxd Rhetjnt Rear axle 2: Twin tires; Max. axle load: 11,600 kg; Steered; Tread depth left inner: 55%; Tread depth left outer: 80%; Tread depth right inner: 80%; Tread depth right outer: 75% Rear axle 3: Twin tires; Max. axle load: 11,600 kg; Steered; Tread depth left inner: 80%; Tread depth left outer: 70%; Tread depth right inner: 80%; Tread depth right outer: 80% Rear axle 4: Twin tires; Max. axle load: 11,600 kg; Steered; Tread depth left inner: 60%; Tread depth left outer: 70%; Tread depth right inner: 70%; Tread depth right outer: 60% Weights Unladen weight: 12,220 kg Payload: 59,180 kg GVW: 71,400 kg Functional Body brand: Nooteboom OVB-73-04 Maintenance, History and Condition APK (Technical Inspection): Valid until 08.2027 Technical condition: very good Optical condition: very good Further information Please contact Arne Honingh for further information.

Condition: used, empty load weight: 1,550 kg, maximum load weight: 7,450 kg, overall weight: 9,000 kg, axle configuration: 1 axle, first registration: 10/2021, suspension: steel, tire size: 385/65 22,5, tire condition: 90 %, color: yellow, Year of construction: 2021, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 40324 Goldhofer, Ballast * Year of manufacture: 2021 * Air connection with coupling head (red + yellow) * Electrical connector: 2 x 7-pin * Suspension: leaf spring * Gross vehicle weight: 9,000 kg * Unladen weight: 1,550 kg * Payload: 7,450 kg * Permissible total weight: 9,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 90% -- 90% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Manufacturer: Eggers ZX 9E * 50 mm towing eye Disclaimer: Subject to change, prior sale, and errors excepted. Additional photos and videos can be found on our homepage. Our comprehensive service includes: * Purchase, sale, and rental of commercial vehicles * Fast and straightforward financing solutions * Handling of all (export) documentation Hnsdpfx Aeynrvxegtot * Procurement of export and customs license plates * Vehicle preparation: new tarpaulins, signwriting, painting, etc. * Professional loading and load securing * TÜV inspections and registration services * Transfer of commercial vehicles Please contact our trained specialist staff for advice – we will be happy to assist you.

Condition: used, empty load weight: 1,550 kg, maximum load weight: 7,450 kg, overall weight: 9,000 kg, axle configuration: 1 axle, first registration: 10/2021, suspension: steel, tire size: 385/65 22,5, tire condition: 90 %, color: yellow, Year of construction: 2021, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 40325 Goldhofer, ballast trailer * Year of manufacture: 2021 * Air connection coupling head (red + yellow) * Connection plug: 2x 7-pin * Suspension: leaf spring * Gross vehicle weight: 9,000 kg * Unladen weight: 1,550 kg * Payload capacity: 7,450 kg * Permissible total weight: 9,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 90% -- 90% (tire size: 385/65 R22.5) * Tire sizes: 385/65 R22.5 * Manufacturer: Eggers ZX 9E * 50 mm towing eye Disclaimer: Specifications and details subject to change, prior sale, and errors excepted. You can find more photos and videos on our website. Hedpfsynrv Esx Agtent Our comprehensive services include, for example: * Purchase, sale, and rental of commercial vehicles * Fast, straightforward financing solutions * Processing of all (export) documentation * Ordering export and customs number plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections and registration service * Transfer/delivery of commercial vehicles Please contact our trained staff. We will be happy to advise you.

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 8,500 kg, first registration: 11/2011, loading space length: 3,800 mm, loading space width: 2,550 mm, loading space height: 15,000 mm, total length: 5,790 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 4,700 mm, Year of construction: 2011, = Additional options and accessories = - Wheel chocks = Notes = 11/2011 OBERMAIER 2-axle ballast trailer with ABS/EBS, Mercedes-Benz axles with disc brakes, 3 heavy-duty lashing points per side, loading area: 380 x 255 cm, floor height: 125 cm, unladen weight: 3,350 kg, permissible total weight: 18,000 kg, tires: 385/65-R22.5 (tread depth left: 16/17 mm; tread depth right: 15/17 mm), Dutch registration. = Further information = Axle configuration Center axle 1: Tire size: 385/65-R22.5; Max. axle load: 9000 kg; Axle brand: Mercedes-Benz DISC; Tire tread depth left: 95%; Tire tread depth right: 90%; Brakes: Disc brakes; Suspension: Air suspension Center axle 2: Tire size: 385/65-R22.5; Max. axle load: 9000 kg; Axle brand: Mercedes-Benz DISC; Tire tread depth left: 100%; Tire tread depth right: 100%; Brakes: Disc brakes; Suspension: Air suspension Rear axle 1: Max. axle load: 8500 kg Rear axle 2: Max. axle load: 8500 kg Weights Unladen weight: 3,350 kg Payload: 14,650 kg GVWR: 18,000 kg Functional Hnodpfozd A A Tox Agtet Body brand: Obermaier OS2-B180L Condition Technical condition: very good Optical condition: very good Identification Registration number: 81-WVB-5 Further information Please contact Arne Honingh for more information.

Condition: excellent (used), mileage: 398,000 km, power: 441 kW (599.59 HP), first registration: 08/2010, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 8x6, fuel: diesel, fuel tank capacity: 1,000 l, brakes: retarder, color: beige, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro5, suspension: steel-air, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2010, Equipment: retarder, = Additional Options and Accessories = - Leaf spring suspension - Air suspension - Radio/CD player - Sleeper cab - Sun visor - Tool box - Power take-off (PTO) = Notes = Transmission: Manual Number of gears: 16 Transmission model: ZT 440 Torque converter Color: Red Load capacity: 375,000 kg Manufacturer: Mercedes Benz Type: Actros MP 3 / 4160 8x4 SLT VIN: WDB9301821L470692 First registration: 19-08-2010 Odometer: Approx. 398,000 km Engine: V8 / 600 HP / Euro 5 Transmission: Manual ZF Transmission / Low – High Range + Split 16-speed with clutch pedal 8x6x4 Axle 1: Steel suspension / 9000 kg / Tires 385/65R22.5 Axle 2: Air suspension / 8000 kg / Tires 385/65R22.5 Axle 3: Steel suspension / 13,000 kg / Hub reduction / Tires 315/80R22.5 Axle 4: Steel suspension / 13,000 kg / Hub reduction / Tires 315/80R22.5 GVW: 41,000 kg GCW: 5th wheel use: 250,000 kg Hnedpeuu Hb Iefx Agtjt Drawbar use: 375,000 kg Additional information: Push front coupling Rear Rockinger RO56E coupling Jost JSK 38 5th wheel mounted on a sliding frame Toolboxes fitted behind the cabin ZF Retarder ZF 440 Torque Converter PTO + Hydraulic Pump Counterweight box loaded with 15 tons of steel for extra rear axle pressure Tractor fuel tank volume: 1000 liters = Further Information = Transmission Transmission: Manual ZF Transmission / Low – High Range + Split 16-speed with clutch pedal, 16 gears, Manual Axle configuration Front axle: Tire size: 385/65R22.5; Max. axle load: 9000 kg; Steerable; Suspension: Leaf spring Rear axle 1: Tire size: 385/65R22.5; Max. axle load: 8000 kg; Reduction: External planetary axles; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Max. axle load: 13,000 kg; Reduction: External planetary axles; Suspension: Leaf spring Rear axle 3: Tire size: 315/80R22.5; Twin tires; Max. axle load: 13,000 kg; Reduction: External planetary axles; Suspension: Leaf spring Weights Unladen weight: 15,920 kg Payload: 250,000 kg GVW: 41,000 kg Condition Technical condition: very good Optical condition: very good Financial information Price: On request

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 06/2022, loading space length: 11,060 mm, loading space width: 2,480 mm, loading space height: 1,500 mm, total length: 113,500 mm, total width: 2,480 mm, total height: 1,500 mm, suspension: air, tire size: 385/65/22.5, color: red, Year of construction: 2022, Equipment: ABS, = Additional options and accessories = - Air suspension - Central lubrication Hnsdjv I R N Tspfx Agtst = Additional information = Axle configuration Tyre size: 385/65/22.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 10,000 kg Rear axle 2: Max. axle load: 10,000 kg; steered Rear axle 3: Max. axle load: 10,000 kg; steered Weights Unladen weight: 8,370 kg Payload: 39,630 kg gross vehicle weight (GVW): 48,000 kg Functional Loading platform height: 150 cm Condition Technical condition: very good Visual condition: very good NOOTEBOOM OVB-48-03 3-AXLE LOWBED SEMI-TRAILER AIR SUSPENSION SAF AXLES 2ND AND 3RD AXLE STEERED BY ELECTROHYDRAULIC AUXILIARY STEERING REMOTE CONTROL CENTRAL LUBRICATION L=1106CM W=250CM 34 X FLOOR ANCHORS 20 X STAKE POCKETS

Condition: new, maximum load weight: 45,115 kg, overall weight: 53,000 kg, axle configuration: 3 axles, Equipment: ABS, More vehicles can be found at [website address]. Excerpt from the equipment list. Complete equipment list available upon request. Loading area: Loading area with approximately 30 mm thick hardwood flooring. 8 pairs of lashing rings that can be folded outwards (LC 10,000 daN). Kingpin: JOST kingpins (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 tons (approx. 50 tons test load). Tires: 385/65 R 22.5. TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data. Axles and suspension: BPW axles, technically rated at 10,000 kg each. 1st and 3rd axles are hydro-mechanically forced-steered and mounted on a turntable. 2nd axle is fixed. Air-suspended with lifting and lowering valve. Axle spanner. Hsdpfx Aszhd Niogtsnt Braking system: Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit. Electrical system: Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098. Steel structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa). Painting: Complete steel structure automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 Carmine Red according to the RAL 841GL system. Rear part is metallic and painted in RAL 9010 (pure white). Rims in silver. Coating tested in a salt spray test according to ISO 9227-NSS. Sealing of cavities with special wax. Accessories: Loading area with approximately 30 mm thick hardwood flooring. 2-inch kingpin. One galvanized steel front panel (EN12642-XL), approximately 1,200 mm high. Yellow-red air couplings on the galvanized front connection bar. 4 pieces of wheel chocks with holders on the front panel. Storage for approximately 1,000 mm lashing bars in the rear central beam. On the gooseneck and rear panel, one holder each on the left and right sides for warning signs including a socket. Yellow reflector tape according to EU regulations on the side and rear of the trailer. 10 pairs of lashing bar pockets for lashing bars approximately 100 x 50 mm in the outer frame of the loading area. European reflector signs (red-yellow) on the rear of the trailer. One holder for a rotating beacon on the rear of the trailer. One mud flap on the rear of the trailer. Manual and description on a USB stick. Speed stickers 80 km/h on the rear and both sides. Electro-hydraulic unit. 1 maneuvering coupling with reinforcement bolted to the end cross member. Load manometer for determining the axle loads including a load diagram. Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and a removable guard around the pump. Follow-up steering from the front and rear using a cable remote control via push buttons, with single-axle steering control (without installation in the tractor unit). 7 pairs of galvanized lashing bars approximately 100 x 50 mm, approximately 1,000 mm high. 4 pairs of lashing bar strip rails, mounted transversely in the loading area, for las

Condition: new, empty load weight: 2,030 kg, maximum load weight: 11,970 kg, overall weight: 14,000 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 1,800 mm, suspension: steel, tire size: 285 /70 R19,5, color: other, gearing type: other, front tire size: 285 /70 R19,5, rear tire size: 285 /70 R19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ZINCED, closed floor, skip according to DIN 30720 up to max. 15 cbm, or for ASK waste compactor, 2 x support, rear, loading height approx. 900 mm, tool box, , surcharge for ramps 1,600 ¤ net, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Hnedpfx Agjzzly Nstot

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated Hnodewx Dctspfx Agtot * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: new, maximum load weight: 52,810 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and soon available vehicles on our website. Excerpt from the equipment list. Full specifications available on request. Cargo area: * Cargo area with approx. 30 mm thick hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor must be capable of transmitting and displaying these data. Axles and suspension: * BPW axles, technical capacity 12,000 kg each, first axle fixed, all others hydro-mechanically forced-steered, mounted on turntables * Air-suspended with lift and lower valve * Axle toolkit Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connections according to standards. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Brake system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels Hsdpfsxttc Ajx Agtont * Steel grades: S355J2+N/S355MC (yield point 355MPa), S690QL/S700MC (yield point 690MPa) Painting: * Complete steel structure automatically shot-blasted after welding using a shot-blasting machine * Secondary blasting with corundum for optimal adhesion of the coating system * Final painting with 2 coats of 2K topcoat, single color in RAL 1007 Narcissus Yellow according to RAL system 841GL * Rear section metallized and painted in RAL 9010 Pure White * Wheels in Silver Grey * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Including accessories: * Cargo area with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection strip * On the gooseneck and rear panel left and right, each with a bracket for warning signs including socket * Rear steering from the front and rear by cable remote control via push buttons, with single-track control of the axles (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm stakes in the outer frame of the cargo area * Load manometer for determining axle loads including load diagram * Lift axle on the front axle, controlled by TEBS E * 5 pairs of crosswise stake pocket rails on the cargo area, for approx. 100 x 50 mm stakes * One INOX toolbox 1,200 x 460 x 550 mm mounted at the front left under the cargo area (in direction of travel) * 1 shunting coupling with reinforcement bolted to the rear cross member * BEKAMAX (Pico) automatic central lubrication system with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)

Condition: new, maximum load weight: 39,070 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Partial list of features. Full equipment details available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also prepared for 3.5-inch) Underrun protection: * According to EC regulations, bolted design Side underrun protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function * Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery Brake system: * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120 * Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS * Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer) Mudguards: * According to EC regulations, PVC mudguards (half-shells) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into the outer frame (traction approx. 3 t) * 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t) Stake pockets/stakes: * 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Bolted front wall, approx. 1,200 mm high, metal plated Stake magazine: * Magazine for plug-in stakes inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Hnsdpfxoyz E T Se Agtst Lighting system: * According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross beam Equipment: * Warning sign according to ECE 70 * 2 LED work lights mounted on the lamp bracket (switched via reverse gear) * Bracket for rotating beacon at the rear (incl. beacon) * 1 foldable, extendable access ladder at the rear (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the supports (switched via reverse ge

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. Hsdpfx Agsq Nxrxetont 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Condition: new, Reglaj Attachment( Ballast Leveling Bucket) Designed to improve sub-rail stability, our Reglaj Attachment is used for ballast leveling operations. Hnsdpsv Spfzjfx Agtjt For more detailed information, please feel free to contact us.