Used Baking Moulds for sale (1,708)

Condition: excellent (used), Catalogue number: 7715 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Bottom horizontal 220 mm 5.5 kW 2) Right vertical 130 mm 7.5 kW 3) Left vertical 130 mm 7.5 kW 4) Right vertical 130 mm 5.5 kW 5) Top horizontal 220 mm 11 kW – 5th spindle electrically adjustable up/down 6) Bottom horizontal 220 mm 5.5 kW 7) Bottom horizontal 220 mm 5.5 kW Hfjdpfxsw Ipcvs Ah Nsb – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable vertically and laterally - Spindle diameter: 40 mm Feed system (top): - 6 double-toothed infeed rollers, driven, + 1 single roller - 3 double smooth rubber outfeed rollers, driven + 3 single rollers - Digital length counter Feed system (bottom): - Swivelling toothed steel infeed roller integrated into lower table - 3 smooth steel feed rollers - Feed drive via Cardan rollers - Pneumatic pressure rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electric thickness adjustment - Body lifting motor: 0.75 kW - Centralised table lubrication - Extraction connection diameters: 5x140 mm, 3x120 mm - Machine dimensions (LxWxH): 4680x1780x1850 mm - Control cabinet dimensions (on pallet): 1020x1000x2230 mm - Weight: approx. 5000 kg ADVANTAGES - Equipped with 8 cutterheads - Universal spindle - Ideal for wet and dry timber - Made in Germany, WEINIG brand - Unpainted (original finish) - Very low operating hours - Used thickness planer, like new Net price: 165,900 PLN Net price: 39,500 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 2017, Overview The blowmoulder was built in 2017 by the manufacturer SIPA. The machine is until February 2026 in operation and can be visited. It is used in a mineral water factory. The blowing machine is in a very good condition due to regular maintenance. Technical data  Nominal capacity: 18.000 bph Nr. of moulds: 8 Last used formats: 0,5l 1,0l 1,5l Neck type: PCO-28-1810 Incl. preform feeding system Incl. preform cooling system Min. - max. bottle diameter: 50 - 125 mm Min. - max. bottle height: 80 - 349 mm Hsdpjx Ti R Esfx Ah Nofb

Condition: used, Year of construction: 1966, shaft length 15 - 130 mm wire diameter 6 - 12 mm length of wire blank max. 170 mm capacity/output with closed mould, adjustable 100 /min capacity/output with open mould, adjustable 67 /min Weight 12,5 t dimensions of the machine (WxDxH) 2,3 x 4,0 x 1,6 m combined double-pressure cold header press for jaws and closed moulds maximum wire diameter for high tensile bolts und carriage bolts 10 mm maximum wire diameter for mild steel bolts and rivets 12 mm Hfsdpjv Sva Eofx Ah Nsb wire diameter range 6 - 12 mm minimum and maximum shaft length 15 - 130 mm maximum length of wire blank 170 mm capacity/output with closed mould, adjustable - 100 St/min capacity/output with open mould - 67 St/min power requirement 15,0 kW mould dimensions - jaw dimensions 54 x 54 mm

Condition: used, Planer and Rabbetting automatic Weinig Unimat 23 for four-sided planing and profiling of woods with feeding magazine EM13 and groove bed. The machine is equipped for ripping (cutting) on spindle 6 and has metric ruler blanks cut from woods. spindle: 6 spindle 1: Below spindle 2: Right spindle 3: Left Hsdpfx Ahox Tgb Uo Nsfb spindle 4: Upstairs spindle 5: Upstairs spindle 6: Below working width: 230 mm working height: 130 mm

Condition: excellent (used), Year of construction: 2015, clamping force: 1,000 kN, Clamping force: 100 t Screw diameter: 30 mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment Hfsdpfx Aox Tdp Njh Nsb

Condition: excellent (used), For sale: complete pillar jib crane with a professional ABUS GM3 chain hoist, 500 kg lifting capacity. Sturdy German construction – perfect for lifting and handling machines, moulds, and workpieces in factory halls, workshops, and warehouses. - ABUS GM3 Hoist Specifications: • Capacity: 500 kg • Model: GM3 500.6–111 • Year of manufacture: 1997 • Lifting speeds: 1.5 / 6.0 m/min (two-speed) • Power supply: 3-phase 380–415 V / 50 Hz • Motor: 0.11 / 0.50 kW • Electromagnetic brake • Pendant control station - Jib Crane Specifications: Hfjdpfew Rddyjx Ah Nsb • Total jib length: 300 cm • Working radius: approx. 270 cm • Type: column- / wall-mounted • Steel, rigid construction • Manual slewing • Complete with trolley and cables ——— - Why choose this unit? • Renowned ABUS brand – one of Europe's leading crane manufacturers • Complete set, ready for installation • Ideal for use with machining centres, lathes, welding stations • 100% industrial-grade setup – not a DIY store toy - The set includes: • ABUS GM3 hoist, 500 kg • Pendant control • 3 m jib arm • Travel trolley • All wiring and accessories as shown in the photos

Condition: used, Year of construction: 1993, Catalogue number: 7705 TECHNICAL DATA - Max working width: 220mm - Max working height: 160mm – 4 spindles: 1) Bottom horizontal: 220mm, 5.5kW 2) Right vertical: 160mm 3) Left vertical: 160mm (2nd & 3rd spindle) 11kW 4) Top horizontal: 220mm with electric adjustment up/down, 7.5kW - All spindles adjustable up/down, right/left - Spindle diameter: 40mm - 4 top metallic, toothed feed rollers - 1 top double rubber outfeed roller - 1 bottom rubber outfeed roller - Feed via Kardana shafts - Stepless feed speed adjustment - Feed motor: 2.2kW Hfodpjw Edgfofx Ah Neb - Lifting motor: 0.55kW - Electric planing thickness adjustment - Infeed table length: 1970mm - Central lubrication - Extraction nozzle diameter: 3x120mm, 140mm - Enclosed cabin - Dimensions (L/W/H): 3500x1600x1500mm - Weight: 1620kg Net price: 33,900 PLN Net price: 8,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with exchange rate fluctuations)

Condition: used, Year of construction: 2002, functionality: fully functional, planing width: 280 mm, working height: 80 mm, overall weight: 2,500 kg, For sale: WEINIG Opticut 150 cross-cut optimizing saw. The machine has been with our company since new. Good condition, regularly serviced, and in continuous use. Viewing and testing on site possible. Scheduled dismantling at the end of 2025. Included: a new infeed belt – not yet installed. Hfsdexvyt Tspfx Ah Nob

Condition: used, - Serial number: 10114243 - 2 levels, 5/10 trays, 400x600 mm - Year: 04-2007 - Model: Haube.SC - Programmable digital control panel Hfedpfx Aeyabi Sjh Njb - LED lighting - 8-speed ventilation - Steam injection - Steam function - Voltage: 230V - Refurbished equipment: The equipment is reconditioned upon order; lead times for servicing and delivery are agreed upon at that time (please inquire for the post-refurbishment price) - Professional convection oven Wiesheu is widely used for baking all types of bakery products: bread rolls, croissants, cookies, etc. The Wiesheu Euromat is a classic convection oven featuring intelligent controls. The steam system ensures baked goods with a golden, crisp and highly appetizing crust. Furthermore, this oven can serve as an attractive centerpiece for any pastry shop, bakery, or retail counter thanks to its appealing design, while the visibility of the baking process helps increase sales of all products. - Optimal air distribution ensures uniform baking results in the hot air oven. HUMIDIFICATION: Rapid steam generation with the right amount of moisture for each type of pastry.

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 253-829, working width: 300 mm, planing height: 200 mm, spindle diameter: 50 mm, Weinig planer in perfect condition 5 spindles 2 bottom spindles 2 vertical spindles 1 top spindle Hfodpfox U U Daox Ah Nsb Jointing systems on one top and one bottom spindle

Condition: refurbished (used), functionality: fully functional, EXTRUDER UNIT FOR BRICKS AND CERAMIC BLOCKS BRAND: BEDESCHI MODEL: SL 750 EXTRUDER DIAMETER: 750 mm (cylindrical) PRODUCTION CAPACITY: 120 tons/hour (at 12 bar pressure) SCREW ROTATION SPEED: 10 / 17 rpm (controlled by ABB ACS 800 VECTOR INVERTER – 693A Output) TRANSMISSION: DIRECT DRIVE WITH BREVINI PDL 702 GEARBOX (remanufactured) AXIAL RETENTION: SKF 29452 Series E (new) DISC CLUTCH (2 units) GENERAL REFURBISHMENT: Blades, linings, pins, seals, clutch discs, paddle shaft bearings, blade sets, axial bearings, vacuum chamber lining (stainless steel), bearings for electric motors Operational test performed, painted and aesthetically finished. COMPLETE WITH: • HYDRAULIC OIL SYSTEM FOR GEAR SHIFT, FILTER, DEGASSER OPERATION • 2 WEAR-RESISTANT METAL-PLATED FILTERS FOR HOLES • CENTRALIZED LUBRICATION UNIT WITH FILTER • DISC CLUTCH (FOR EXTRUDER + DEGASSER) • ORIGINAL BEDESCHI DRIVE BELTS (FOR BOTH UNITS) • EXTRUSION MOTOR 315 KW, 6-POLE (original Bedeschi) • DEGASSING MOTOR 75 KW, 6-POLE • MOTOR LUBRICATION UNIT • VACUUM GROUP MOTOR 30 KW, 4-POLE • MAIN DRIVER ASSEMBLY WITH BELT TENSION ADJUSTMENT GUIDES • EXTRUDER BASE FRAME • DEGASSER UNIT • INLET PULLEY SUPPORT • DEGASSER WITH 2 COUNTER-ROTATING SHAFTS WITH PADDLES (VACUUM CHAMBER) • SLEWING JIB CRANE (original Bedeschi) with electric hoist ACCESSORIES INCLUDED IN THE SALE 1- 3 DIE HOLDERS BY TECNOFILIERE (ITALY) 2- 1 FLANGE WITH BOLTS FOR 2 SIMULTANEOUS DIES 3- 1 ABB ACS 800 INVERTER CABINET (extruder motor) 4- 1 OIL VACUUM PUMP UNIT 30 KW 5- 1 400L VACUUM STORAGE TANK MORANDO LV 8/12 HIGH-SPEED ROLLER MILL (refurbished) TECHNICAL SPECIFICATIONS Original manufacturer: MORANDO IMPIANTI Type: HIGH-SPEED ECCENTRIC PRESS, ELECTRONIC ACTUATION Hodpfx Aox U Ukash Njfb Cylinder width: 1200 mm Cylinder diameter: 800 mm Complete with: • Original Morando base platform • 01 complete spare roll for quick replacement (bearings, shaft, pulley) • Original Morando material inlet cover • Hydraulic control unit for structural load management • Servo-driven rolling gap calibration system • Original Morando documentation Mantle Condition Fast roll: 80% Slow roll: 60%

Condition: excellent (used), Professional granulator from the German brand Dreher – model S 26/26 GFS-SPEZIAL. This unit is designed for shredding plastics from injection molding or extrusion processes. Robust construction, proven VEM 7.5 kW motor, three-phase 400 V power supply. The machine features a large feed hopper, convenient service access, and an electrical control cabinet with emergency stop button. The installed low-speed three-phase motor ensures high shredding power with stable operation. • Motor power: 7.5 kW • Power supply: 400 V 50 Hz • Speed: 1500 rpm • Throughput suitable for medium and large injection moulding machines Hodpfx Aevyumyoh Nsfb • German manufacturing quality • Sturdy frame and knife assembly Very good condition, mechanically inspected, ready for operation.

Condition: excellent (used), CATALOG NUMBER 7665 Technical data: - Shaft width: 510 mm - Planing shaft (2 knives installed), 4-knife shaft - Maximum thickness of material for thicknessing: 200 mm - Maximum thickness of workpiece on side heads (3-sided): 100 mm – From above: - Anti-kickback fingers - Serrated feed roller - Planing shaft - Pressure beam - Smooth outfeed roller – From below: - Adjustable rollers in lower table: 2 pcs - Guide bar - Lateral pressure from the side – From the rear: - 2 side spindles + pressure units - Spindle height: 100 mm - Maximum spindle spacing: 510 mm - Spindle diameter: 30 mm - Spindle adjustment: left/right - Motor: 2 × 1.5 kW - Two feed speeds - Main motor: 7.5 kW - Extraction port: 2 × 100 mm - Overall dimensions (L/W/H): 1800 × 1250 × 1000 mm - Weight: 1,070 kg ADVANTAGES – Made in Poland – 4-knife shaft – Very good condition – Used planer Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may be subject to change) Hfedpfxjx Tplce Ah Nob

Year of construction: 2006, condition: excellent (used), 684 USED Miwe Ideal deck oven 18 sq m. We have 2 such ovens. EXTERNAL DIMENSIONS: - W: 255, - L: 350, - H:256, CHAMBER DIMENSIONS: - W:180 - L: 200, TECHNICAL DATA: - baking area: 18 sq m, - 5 chambers, - gas/oil burner to choose from, - stainless steel housing. The price is a net price. Pais options available: transport. Our languages: ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN. Hsdpfx Aep N D I Hjh Nefb

Condition: excellent (used), Planer Hfjdpfxetrdwtj Ah Nob 9 heads Working width - 20 cm Working height - 22 cm 5 pulleys in the table Heads 1 bottom 7.5 kW 2 right 11 kW 3 left 11 kW 4 right 11 kW 5 up to 11 kW 6 down 11 kW 7 up to 11 kW 8 down 11 kW 9 universal 11 kW PERFECT CONDITION!

Condition: used, machine/vehicle number: 008276, Position 1: Planers/Moulding Machines KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 2: Panel Feeding and Loading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Hfedpfx Aex A Tbwsh Njb Position 3: Panel Stacking and Offloading KENTWOOD-FEEDMAC31+M200+FEEDMAC33

Condition: ready for operation (used), Year of construction: 2015, operating hours: 45,109 h, General Data Machine weight 4400 kg Control Unit Brand FANUC Injection Unit Screw diameter 36mm Clamping Unit Clamping force 150-180t Hsdpfx Ahjx S Slco Nsfb This FANUC Roboshot S150iA was manufactured in 2015. It's an electrical injection moulding machine with a closing force of 150-180 tons and a screw diameter of 36mm. Weighing 4.4 tons, it operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, suitable for thermic oil heating (180 kW) Maximum baking temperature 220-250 °C adjustable temperature adjustable speed Minimum cooking time: 4 min Maximum cooking time: 60 min Hfodjx S E Nuspfx Ah Njb belt width 600 mm canopy with electric hoists suitable for steam injection (to heat up and to improve product yields) 400V-50 Hz-42A dimensions (l x w x h) : ± 10.000 x 2.000 x 2.700 mm

Condition: excellent (used), CATALOG NUMBER: 7663 TECHNICAL DATA - Maximum planing width: 510 mm - Maximum planing height: 200 mm – Top section: - Anti-kickback fingers Hjdpfxsx Tphdo Ah Nefb - Feed roller, toothed - Hold-downs, 2 rows - Infeed roller, toothed - Hold-down - Planing shaft, 510 mm, 4-knife, 7.5 kW motor - Hold-downs - Discharge feed roller, smooth - 2 outfeed pressure rollers - Smooth feed roller – Bottom section: - Hold-down - Adjustable infeed table with slip roller - Planing shaft, 510 mm, 4-knife, 5.5 kW motor - 2 smooth slip rollers - Side pressure roller – Rear section: - Side spindles: 1) Vertical right: 140 mm, 4 kW 2) Vertical left: 140 mm, 4 kW - Spindle diameter: 40 mm - Fitted cutterheads: 4-knife, height 120 mm - Spindles adjustable up/down, left/right - Stepless feed speed adjustment - Electric table elevation - Extraction port diameters: 3x150 mm, 1x110 mm - Dimensions (L/W/H): 2300x1700x1700 mm - Weight: 2,200 kg ADVANTAGES – Ideal for flooring processing – Electric table elevation – Manufactured in Czech Republic – Used planer in very good condition Net price: 36,900 PLN Net price: 8,780 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Year of construction: 2013, condition: refurbished (used), functionality: fully functional, This is an SCC 61 combi steamer from the premium manufacturer Rational, electric version. This combi steamer is equipped with a hanging rack for 6 shelves. The unit has been fully overhauled in our in-house workshop and is in full working order. It is offered with a 6-month warranty on all electrical parts. The base stand pictured is not included in the offer, but can be purchased optionally. An invoice with VAT shown separately will be provided. Service: We are happy to assist in arranging a certified Rational service partner. Are you looking for a specific Rational device type? Contact us—we have access to a wide range of used and new equipment. We are happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our used equipment service for you: - 6 months warranty on electrical parts, limited to replacement of defective parts, excluding installation/removal costs - High-quality branded equipment at fair prices - Professional refurbishment/inspection & expert cleaning - Tested & fully functional—or your money back - Flexible shipping or collection options - Competent advice—before and after purchase - Provision of user manuals, wiring diagrams & spare parts - Electrical safety check according to DGUV V3 This combi steamer provides space for 6 x 1/1 GN containers. In automatic mode, the unit independently detects the ideal cooking path for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing), as well as the size of the food, loading quantity, and product-specific requirements. Technical data: - Dimensions (W x D x H): approx. 847 x 776 x 782 mm - Power supply: V: 400 / kW: 11.0 / Hz: 50/60 - Capacity: 6x 1/1 GN - Weight: approx. 103 kg - Serial number: E61SH13042345756 - Year of manufacture: 2013 Condition: used, fully functional Further information: - With careControl - self-cleaning system - In combi-steamer mode, three operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C) - Core temperature probe - Handshower with automatic retract - 8.5" color display and touchscreen - 5 programmable fan speeds - Integrated, maintenance-free fat separator - Automatic start time preselection - 7 cleaning levels for unattended cleaning—including overnight - Steam injection adjustable in 3 levels—from 30°C to 260°C - 5 programmable proofing stages - USB interface - Seamless, basin-shaped hygienic cooking chamber with rounded corners Hfjdpox S Epnefx Ah Neb - Halogen cooking chamber lighting Shipping: - Delivery or self-collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by arrangement Subject to changes and errors. If you have any questions, require advice, or would like to view the equipment locally, you can reach us by phone during our business hours: Monday–Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is carried out exclusively under our general terms and conditions (GTC).

Condition: used, Year of construction: 2018, 6 x Stork injection moulding machines Machine type Commissioning Age in months Hedpfxjx Uymas Ah Njfb 4400-2150 19/12/2002 278 4400-2150 28/11/2012 159 4400-2150 14/08/2015 126 6600-5650 01/11/2011 171 9000-5650 30/05/2014 141 9000-5650 01/11/2018 87

Condition: used, -Dimensions (LxWxH): 850x950x850mm -Capacity: 10 x 1/1 GN Hfjdpfxsx Ux Sno Ah Njb -Model: CPCM10 -Serial Number: E11CD03051089 -10 levels: 540x330mm -3 cooking modes: steam, convection, combination Gtjy Tdox Ux Snox Hdst -5 fan speeds -Voltage: 400V -Power: 19kW -Weight: 336kg

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 1240 mm Measurements depth 4530 mm Measurements height 1910 mm Machine weight 3500 kg Injection Unit Screw diameter 36 mm Stroke volume 153 cm³ Injection pressure 173 MPa Screw speed 98 g/s Clamping Unit Clamping force 900 kN Hedpfox D I Uuex Ah Nefb Opening stroke 320 mm Max open daylight 700 mm Ejector stroke 100 mm Ejector force for / back 33 kN Media Oil tank 190 L This HAITIAN MA900 II eco was manufactured in 2016. It is a hydraulic injection moulding machine with a clamping force of 900kN and a shot volume of 153 cm3. Consider the opportunity to buy this HAITIAN MA900 II eco hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: reconditioned (used), Used Rheon VX 202 stress-free divider Rheon VX is a series of stress-free dividers that can divide most doughs - even very moist ones. From rye bread in a baking tray to Italian flat bread ciabatta. The most important advantages of the device: - The machine divides the dough not by volume, but by weight - hence the accuracy of the mass of each product, - In the process of dividing the dough, the machine does not exert pressure on the dough itself, but on the contrary, it continues to knead the dough inside the machine - therefore, the gluten of the dough is not destroyed, but remains "alive" - therefore no chemical food additives are required, Hedsvy Ua Tspfx Ah Nofb - The machine is extremely compact and quiet - hence the free space in production and quiet operation when cutting the dough, - In terms of reliability, our machines take first place among such machines - therefore the long service life of the machine (production life is 25 years), - The machine is equipped with the "Touch Screen" Control Panel, - The machine works with any type of dough (except puff pastry), of any hardness, humidity and composition. Technical data: - Capacity: up to 800 kg/h, - Test width at the outlet: 130-150 mm, - Rows: 1 or 2 rows, - Dough range in one row 150 - 1200 g, - Dough range in two rows 75- 600 g. - Hopper for 42 l (approx. 20-30 kg of dough). Warranty: 6 months warranty on parts - worldwide.

Condition: excellent (used), - External dimensions (LxWxH): 1082x1052x1117 mm - Capacity: 20 x GN1/1 - 20 levels: 540x330 mm Hedpswx Rw Rjfx Ah Nofb - Combi oven for 1 trolley - 3 cooking modes: steam, convection, combined - 5 air circulation speeds - Voltage: 400 V - Weight: 336 kg