Used Automatic Sealer for sale (20,873)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Very few operating hours, installed at the beginning of 2023, in very good condition. Consisting of: 1 City e perfect binder - with PUR - with hotmelt - with cooling and drying section Wohlenberg City e perfect binder Base machine Edition 4000 for standalone or in-line operation, compatible with a Sprinter gathering machine and a three-knife trimmer Edition 5000, extended machine configuration for increased speed up to 5,000 cycles/hour Mobile hotmelt spine gluing unit, 40 kg, with 2 application rollers Compact, mobile PUR spine gluing unit - Europe, with 2 application rollers Mobile hotmelt side gluing unit Gsdpfeytbz Isx Ahvjip Cooling and drying section

Condition: excellent (used), wire diameter - max. 5 mm Gisdpfeyr Si Hex Ahvsp total power requirement 7,5 kW

Condition: used, Year of construction: 2005, functionality: fully functional, TECHNICAL DATA Spindle Head Max. bar stock diameter (mm): 13.0 Material quality (DIN 671) (mm): Ø Xh9 Collet chuck, selectable: Through-bore Guide bush, selectable: Through-bore Max. turning length / spindle stroke: • with fixed guide bush (mm): 130 • with rotary guide bush (mm): 80 • with programmable guide bush (mm): 80 Spindle speed (rpm): 12,000 C-axis electronic resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool Carrier 1 Slide travel X1 (mm): 35 Gjdeyr N Dzjpfx Ahvoip Slide travel Y1 (mm): 38 (-10 +28) Rapid traverse X1 / Y1 (m/min): 15 Tool stations (number): 6 (12) Turning tool cross-section (mm): 8x8 or 12x12 Clamping diameter for driven drilling tools (mm): 0.5 - 7 Chip-to-chip time (s): 0.3 Tool Carrier 2 Slide travel X2 (mm): 35 Slide travel Z2 (mm): 50 Rapid traverse X2/Z2 (m/min): 15 Tool stations (number): 6 Turning tool cross-section (mm): 8x8 or 12x12 Clamping diameter for driven drilling tools (mm): 0.5 - 7 Chip-to-chip time (s): 0.3 Tool Drive for Tool Carrier 1 and 2 Speed (rpm): 0...8000 Max. driven tools (number): 2x6 Clamping diameter for drilling tools (mm): 0.5 - 7 Sub-Spindle / Front Unit Max. bar stock diameter (mm): 13.0 Max. longitudinal stroke Z3, Z4 / X3 (mm): 140 | 228 Rapid traverse Z3, Z4 / X3 (m/min): 30 Tool stations (number): 4 Spindle speed (rpm): 12,000 C-axis electronic resolution (deg): 0.001 Rear Tool Unit, Slide/Fix Stroke Z, slidable with working spindle (mm): 80 Tool holder diameter (mm): 20 Tool stations (number): 3 Rear Tool Unit (X4-axis) Stroke X4 (mm): 39 Rapid traverse speed (m/min): 15 Tool holder diameter (mm): 28 Tool stations (number): 4 Tool Drive for Rear Tool Unit (with X4-axis) Speed (rpm): 0...10,000 Max. driven tools (number): 4 Clamping diameter for drilling tools: • driven (mm): 0.5 - 7 • stationary (mm): 0.5 - 10 Coolant System Pump pressure single stage (bar): 3 120 bar pump for front/rear unit Tank capacity (l): 180 Delivery rate (l/min): 40

Condition: used, ESCO ESCOMATIC D 6 SR is an Automatic lathe engineered for precision machining, high accuracy and reliable production. Capacity: diameter of work admitted 6 mm; with flat cames max turning length 62 mm; spindle hole 6 mm. Specifications: 3 spindle speeds from 2400 to 6000 rpm; 3 tool cutters; turret slide/revolver 1a (D6-8-Mp 103/a) with 4 tools; voltage 60Hz 220/440 V; total power 2.5 CV; machine weight approx. 1150 kg; footprint L1500 × W1000 mm. Key equipment: turret (D6-8-Mp 103/a) and cam disc. Delivers tight tolerances; suitable for automotive, watchmaking, machine tools, aerospace and medical sectors. Gsdpfx Ahjyr Hgmjvsip

Condition: good (used), Multigraf Eurofold 435 SA Automatic Folding Machine for Pharmaceuticals This is the latest product from the Swiss company Multigraf AG. The machine is ready for production. The machine has 4 cassettes electronically adjusted via a touchscreen panel, very quick settings, and high precision. Pneumatic feeding and full sound insulation. The machine is ideal for pharmaceuticals thanks to its low fold of approximately 20 mm. Gisdpfxjyrz Uxo Ahvsp Infinitely variable folding speed. 230V power supply. Becker compressor. Format: 35×55 cm The counter/controller performs the following functions: • setting a specific material batch • setting the pause time between individual sheet batches • displaying the total amount of material processed • displaying the operating speed (quantity/hour) • programming the vacuum duration • programming the pulse duration for the distance between sheets. Paper weight processed – 40 – 240g/cm² Productivity, A4 format/hour – up to 30,000

Condition: good (used), Bacciottini Pit Stop AF High Speed ​​Automatic Creaser Fully operational and ready to use. Manufactured in 2018. This is the most efficient creasing and perforating system on the market, with a robust design. Made in Italy. Non-stop vacuum feeding with the option of adding material during operation. Two independent compressors (suction and airflow). The set includes creasing and perforating tools. Machine with an enlarged format up to 1000mm. Technical data: Maximum sheet size: 500×1000 mm Min. sheet size: 100×150 mm Maximum speed (for A4 format): 10,500 sheets/h Material weight: 80-600 GSM Maximum number of creases per sheet: 100 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 400 V Power consumption: 3.5 kW Weight: 233 kg Dimensions: 170 x 85 x 120 cm Giodsyrz Ulopfx Ahvep

Condition: good (used), Ideal 8343 Automatic Folding Machine Made in Japan. Perfect condition, ready to use. This model is very well-equipped, with automatic cassette adjustment, automatic paper size detection, and an automatic feeder. Technical data: Paper size: min: 91×128 mm max: 297×420 mm A6-A3 Weight: 45-160g (max. up to 230g when half-folding) Power supply: 230V Weight: 34kg Detailed specifications: – Automatic folding position setting for the six most popular folds (half-fold, quarter-fold, „Z”, „C”, „altar” fold) – Automatic paper size recognition for six formats (A3, B4, A4, B5, A5, B6) Paper folding speed adjustable from 3,300 to 10,000 sheets per hour Shelf for folded documents Automatic paper feeding system Gsdpsyrz Sdefx Ahvsip Smooth paper flow thanks to the conveyor belt Folding counter, batch countdown, total count, etc. Automatic stop with a sound when all sheets are folded A complex paper jam is signaled by an appropriate sound and a LED indicator.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Complete automatic URBAN 8 head welding 4 head cleaning line for PVC windows and doors profiles. System consisting of 2 paralel 4-head welding units of AKS 6410 27/25 with 1 automatic unloading and transfer bench TBA-F 26/28-TE 9M on 2 transport bench TBA-F 26/28H to automatic 4-head cleaning unit SV 800/2.5M and 1 final bench. Set of jaws for profiles. Sold due to company closure. Giedpfsyundrsx Ahvjp

Condition: used, Year of construction: 2023, Manufacturer : Soco System Year : 2023 Manual/semi-automatic carton packaging line Case erector + Bottom sealer: BE 2300 ATS L Gjdpjyryyyjfx Ahvoip Top taping machine: T-4000 Carton sizes: Mini: 250 x 190 x 130 mm Maxi: 620 x 450 x 550 mm Capacity: 15 boxes/min Motorised carton storage unit: approx. 190 units. Touchscreen control panel Product insertion length available between two machines: - 2 conveyor version: 400 cm - 3 conveyor version: 600 cm Video available in operation Complete technical file

Condition: excellent (used), mileage: 478,991 km, power: 125 kW (169.95 HP), first registration: 02/2016, fuel type: diesel, fuel: diesel, color: white, gearing type: automatic, emission class: euro5, number of seats: 3, total length: 4,380 mm, total width: 2,000 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), power assisted steering, = Additional options and equipment = - Driver airbag - Audio controls on steering wheel - Third brake light - Front electric windows - Climate control - Height-adjustable steering wheel - Front center armrest - Multifunction steering wheel - Radio/CD player - Rain sensor - Central locking with remote control Gisdpfx Ahsyufdijvsp = Further information = Number of cylinders: 4 Engine displacement: 2,998 cc Unladen weight: 2,200 kg Technical condition: very good Visual condition: very good Damages: none Number of keys: 2 Registration number: VT-976-L

Year of construction: 2012, condition: like new (used), functionality: fully functional, Rösler RSKI 1400-SAT – Satellite Indexing Blast Cabinet, Automatic, 2 Nozzles For sale is a near-mint Rösler injector blast cabinet, model RSKI 1400-SAT. This system is designed for the automatic blasting of small and medium batch series, making it ideal for components up to approximately 280 mm in diameter. Parts are evenly blasted via a rotating satellite table—ideal for cleaning, deburring, descaling, derusting, or roughening precision components. Once raw parts are loaded, the blasting time per satellite can be set at the control panel. After confirming raw part loading using the button directly next to the cabin door, the individual satellites index into position and are processed. Upon completion of the blasting cycle and after all parts have been treated, a finished message is displayed and the system can be reloaded and unloaded as needed. Thanks to the generously dimensioned integrated filtration technology, the blasting machine is suitable for virtually all types of blasting media, including finer mineral abrasives without issue. Originally used in medical technology, the interior of the system is lined with rubber. This presents no disadvantages for other industries or users; indeed, it provides additional wear protection for both media and machine and dampens noise. This means the unit operates both more efficiently and more quietly than an unlined cabin. By removing the front manual access cover, manual blasting can also be performed at any time with minimal setup effort. Additional nozzles can be retrofitted if required. Key technical data (excerpt): - Manufacturer: Rösler Oberflächentechnik GmbH - Model: RSKI 1400-SAT Satellite Blast Cabinet - Year of manufacture: 2012 - Blast system: Injector blasting with 2 boron carbide nozzles SPI 38 - Satellite rotary table with six workpiece holders - Power connection: 400 V, 3Ph/N/PE, 50 Hz - Connected load: 4.0 kW - Main drive: 0.75 kW - Control voltage: 24 V DC Gijdpfxoyudhas Ahvop - Separate control cabinet, operation via buttons/switches and foot pedal Your advantages at a glance: - Automatic satellite blast cabinet for series and precision components - Originally equipped for use in medical technology - Uniform all-round processing of parts without direct component contact - Two blast nozzles for excellent surface coverage and reduced processing times, with optional expansion - Large front door and viewing window for convenient loading and optimal process monitoring - Compact, rugged construction—easily integrated into existing production environments

Condition: excellent (used), Fortuna 3 Automatic Dough Divider - used - weight range 30–90 g - technically functional Gjdpfx Asyuc Avohveip - 400 V power supply - 2 moulding trays - collection from warehouse / shipping option available - price on request

Condition: new, Year of construction: 2026, Rondo Automatic Dough Sheeter - Model: Rondostar - Year of manufacture: 2026 - Brand new - Computer-controlled - Automatic flour duster - Automatic dough winding - Warranty Gjdpjyucz Ssfx Ahvjip - Collection from warehouse / shipping option - Price on request

Year of construction: 2025, condition: new, SEMI AUTOMATIC PASTING MACHINE MODEL; MAGRAFKA-100 Giedognlv Depfx Ahvop YEAR; 2025

Year of construction: 2019, condition: new, SEMIAUTOMATIC BOOK COVER POSITION MACHINE LJ308A Gsdpfxofdzwyo Ahvsip -new machine

Condition: excellent (used), wire diameter - max. 2,5 mm Gjdpfx Aheyrtwlovoip

Year of construction: 2018, condition: used, CRS 180 A 32 - Year 2018 Automatic Sandblasting Machine H 1800 mm • Overall dimensions: Length 5200 mm (central body 1200 mm + sides 1880 mm each), Width 13500 mm, Height 2700 mm. • Total weight: 480 kg. • Specific load: Approximately 200 kg/m². • Materials: Bolted, welded, or riveted profiles and sheet metal. 32 zones Godpfx Aeyrp Itohveip Electrical Specifications • Power supply: 380 Volts Three-Phase + Neutral. • Total panel power: 1.5 kW.

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Gedjh Hvk Aspfx Ahveip Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: good (used), Year of construction: 2003, functionality: fully functional, Technical details working diameter max. 32 mm spindle passage 36 mm turning length 320 mm Control MITSUBISHI MELDAS 635LC travel max. (X1) 108 mm travel max. (Y1) 275 mm travel max. (Z1) 325 mm travel max. (X3) 238 mm travel max. (Z3) 410 mm Giedpeyrn I Sofx Ahvop main spindle speeds: 200 - 8000 U/min c-axis 0,001° deg. Subspindle spindle speeds 200 - 7000 U/min c-axis 0,001° deg. rapid traverse 20 m/min main drive 3,7 / 5,5 kW Subspindle motor 1,5 / 2,2 kW dimensions of machine 2,77 x 1,24 x 1,79 m weight of the machine ca. 2850 kg Additional information CNC Swiss-Type Lathe First put into operation December 2005 The machine was used for a single shift and is in good condition with no maintenance backlog. Equipment: FMB Turbo 5-42/3200C bar loader, built 2004 High-pressure pump Many collet chucks for main spindle Various collets Drive unit for synchronously driven guide bush Synchronously driven guide bush Drive unit for transversely driven spindle on linear support Pick-up spindle Collet chuck for pick-up spindle Blow-out device for pick-up spindle Five fixed tool holders on the rear Workpiece removal device Coolant tank Central lubrication system Door lock Ejection device for workpieces with through holes Machine documentation The machine will be sold without tools and extraction system.

Condition: used, Year of construction: 1997, saw blade diameter 400 mm Godpfoyt R I Dex Ahveip capacity 90 degrees: round 135 mm capacity 90 degrees: square 130 mm 200 x 80 mm saw blade turning speeds 12 / 25 m/min weight of the machine ca. 0,75 t dimensions of the machine ca. 1,2 x 0,9 x 1,8 m Cold circular saw - Semi-automatic - Hydraulic clamping - Coolant system - Protective cover - good condition

Condition: used, spindle passage 12 mm Control Fanuc type LB 2 bar loader FMB weight of the machine ca. 1,4 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Giedpjyt R Haofx Ahvop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, spindle passage 60 mm cross-slide 4 turret head 6 Pos. The tech. Data are manufacturer or operator information and therefore non- Gsdpfx Ahjyt R E Asvoip binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), functionality: fully functional, 1 x CP Bourg BCMEx - CP Bourg BSR - CP BMEx - CP Bourg Squarefold - CP Bourg BSF 26 CP Bourg BCMEx - CP Bourg BSR - CP BMEx – the ideal booklet making solution, e.g., for Xerox, iGen 4 or 5, Nuvera, Iridesse, Versant 4100, or standalone with a CP Bourg Stacker Gisdpfx Ahswf Ryxovsp Inspection welcome Tested and working – serviced every year and very well maintained. B2B sale only Inspection welcome in northern Germany

Condition: ready for operation (used), Packaging capacity: approx. 30pieces/min, side belt height: 50mm, max. carton dimensions X/Y: 515mm/505mm, min. carton dimensions X/Y/Z: 140mm/90mm/80mm, tape width: 50mm, weight: approx. 200kg. An on-site inspection is possible. Gedoyt N Amopfx Ahvsip

Condition: reconditioned (used), Year of construction: 2009, Automatic dough divider Koenig Mini Rex 4000 with moulding station - used - year of manufacture: 2009 - refurbished - maximum output: 4,000 pcs/h - weight range: 30–135 g - electronic control Godpoyt Ipljfx Ahveip - warranty - collection from warehouse/shipping option - price on request