Used Aufspannen Angle Adjustable for sale (25,339)

Condition: used, Universal Shaker Accessories / Clamping Devices For sale is a used accessory set for an electrodynamic shaker or vibration test stand. The set consists of numerous solid aluminum clamping devices, angle adapters, adapter plates, clamping blocks, retaining elements, precision chucks, and other accessories for vibration testing. The components are ideally suited for individual test specimen setups, special designs, and use in vibration test stands. Technical data: Manufacturer: unknown Type: Accessory set for electrodynamic shaker / vibration test stand Material: predominantly aluminum Design: Clamping devices, angle adapters, adapter elements, and fasteners Hfedozpya Hopfx Agtel Equipment: Several clamping devices Angle adapters of various sizes Precision adapter elements Clamping blocks Adapter plates Aluminum rings Retaining and fastening elements Solid aluminum constructions Precision-engineered components Threaded holes and clearance holes Universally applicable Further accessories as shown in the pictures Application areas: Electrodynamic shakers Vibration test stands Vibration testing Material testing Environmental simulation Research and development Automotive industry Aerospace Test specimen setups and special designs Scope of delivery: Complete accessory set as shown in the pictures Clamping devices Angle adapters Adapter plates Clamping blocks Adapter elements Aluminum rings Further accessories as shown in the pictures Condition: Used. Visual condition as shown in the pictures. Normal wear and tear, scratches, and pressure marks are present due to age. Transport: Only the accessories shown in the pictures are sold. The table shown in the pictures and other items not explicitly mentioned are not included in the sale. Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Year of construction: 2012, functionality: fully functional, total length: 30,000 mm, drilling capacity: 40 mm, type of input current: three-phase, total width: 3,500 mm, drill diameter: 40 mm, input voltage: 400 V, FICEP HP35T - CNC SAWING & DRILLING LINE FOR ANGLE STEEL | YEAR 2012 | RECONDITIONED The Ficep HP35T is a CNC-controlled sawing and drilling line for the economical series processing of angle steel (L-profiles) in structural steelwork. Sawing and drilling run in a single automated pass with DSTV data connectivity, reducing handling, marking time and scrap for beam connections, gusset plates and lattice structures. CONDITION & RECONDITIONING Reconditioned and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The HP35T processes equal- and unequal-leg angle steel (L-profiles) up to 350 x 350 mm leg dimension and combines sawing with two drilling spindles (max. dia. 40 mm) into one continuous machining process. Material is fed via a motorized infeed roller conveyor, hydraulically clamped and positioned under CNC control. The PC-based Ficep CNC control enables manual programming at the operator terminal as well as direct program import from structural-steel CAD systems (e.g. Tekla, SDS/2, BOCAD) via DSTV. Typical applications: structural steelwork and profile processing, lattice and mast structures, plant and steel hall construction, gusset plates and beam connections. TECHNICAL DATA - Manufacturer: Ficep | Model: HP35T | Year: 2012 | Serial number: 25029 - Machine type: CNC angle processing line (sawing & drilling line) - Condition: used, reconditioned by certified technician - Cutting process: saw - Drilling spindles: 2 x drilling spindle, max. drill dia. 40 mm - Clamping: hydraulic - Profile type: equal- and unequal-leg angle steel (L-profiles) - Max. leg dimension: up to 350 x 350 mm | Min. profile: approx. from 50 x 50 x 5 mm - Feed rate (max.): approx. up to 40 m/min - Positioning accuracy, longitudinal axis: approx. +/- 0.2 mm - Hydraulic unit motor: approx. 15 kW | Feed motor (servo): approx. 3 kW - CNC control: Ficep proprietary / PC-based - DSTV interface: direct import from structural-steel CAD - to be confirmed during inspection - Electrical connection: 400 V / 50 Hz / 3-phase + N + PE (TN-S), control voltage approx. 24 V DC - Overall machine length: approx. 30,000 mm (line incl. roller conveyor; exact dimension before loading) - Machine width: approx. 3,500 mm | Machine weight: on request Note: Values marked "approx." are reference figures and will be confirmed bindingly during inspection. SCOPE OF DELIVERY - 1 x Ficep HP35T angle steel processing line (year 2012) - 1 x hydraulic unit (integrated) - 1 x CNC control unit with operator terminal - 1 x infeed roller conveyor (motorized) - 1 x electrical control cabinet - 1 x machine documentation / operating manual (Italian/English) LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Hjdpfxexn T Smo Agtofl Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: good (used), Inclined roller conveyor, Mosca, SRF – used: Price ex works: only €1,950.00 (net) ex works! Manufacturer: Mosca Type: SRF Year of manufacture: unknown Hodozpf Icopfx Agtefl Further details to follow Condition: good Available: immediately Location: Erfurt area

Condition: good (used), Year of construction: 2015, Inclined roller conveyor, Mosca, SRF – used: Price ex works: only €2,950 (net) ex works! Hfodpfozpf Hxsx Agtol Manufacturer: Mosca Type: SRF Year of manufacture: 2015 Machine number: 109867 1L+N+PE, 50-60Hz, 100-240V, 2.5A, max. 16 A Condition: good, Available: from approximately the end of October 2026 Location: Erfurt area

Condition: used, Workbench vise, parallel vise ORION with dovetail guide and height adjustment Type: 125 Jaw width: 125 mm Jaw height: 25 mm Clamping range: max. 210 mm Hfedpezpbrkjfx Agtol Overall height: 590 mm - 360° rotatable - Dovetail guide - Anvil surface for light straightening work - Approx. 250 mm height adjustment without lifting system Weight: 41 kg Good condition

Condition: ready for operation (used), Steel angle / solid L x W x H 800mm x 710mm x 840mm Thickness 60mm Weight 480 kg Errors and omissions excepted. Hsdpfxsztfbde Agtsfl

Condition: ready for operation (used), Steel angle / Clamping angle / Solid Hfodpfx Agoztd U Aetol LxWxH 720mm x 650mm x 1550mm Thickness 65mm Weight 790 kg Errors and omissions excepted.

Condition: used, The Kilia Angle Grinder 130 is a professional industrial meat grinder designed for continuous operation in meat processing plants and food production facilities. Featuring a 130 mm throat diameter and a powerful 17 kW drive, it delivers efficient grinding of fresh and slightly frozen meat while maintaining excellent product quality. Its stainless steel construction ensures durability, easy cleaning and high hygienic standards. Technical Specifications Manufacturer: Kilia Hfedpfx Agszn I Suetel Model: Angle Grinder 130 Type: Industrial Meat Grinder (Angle Grinder) Throat Diameter: 130 mm Material: Stainless Steel Power Supply: 400 V / 50 Hz / 3N Installed Power: 17 kW Dimensions (L × W × H): 1100 × 1000 × 1500 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 351 h, Linde E50 Electric Forklift | 5,000 kg | Triplex 5,365 mm | 351 hours | Battery + Charger Description For sale is a very well-maintained Linde E50 electric forklift from the 388 series. The vehicle is in excellent optical and technical condition and has only approximately 351 operating hours. The forklift features a triplex lift mast, hydraulic fork adjustment, a side shifter, a powerful 80V Triathlon battery (840 Ah), and the matching original Linde charger. In addition, fork extensions with a length of 2,400 mm are included in the scope of delivery. The DGUV and FEM inspection stickers are valid until 2026. Technical data: Manufacturer: Linde Material Handling Hfedeznu Amspfx Agtol Model: E50 Series: 388 Year of manufacture: 2022 Drive: Electric Load capacity: 5,000 kg Operating hours: approx. 351.3 h Lift mast: Triplex Lift height: 5,365 mm Free lift: approx. 1,516 mm Load center: 600 mm Fork length: 1,600 mm Fork extensions: 2,400 mm Tires: Superelastic Battery: Manufacturer: Triathlon Type: 6 PzS 840 Voltage: 80 V Capacity: 840 Ah Energy content: 63.9 kWh Year of manufacture: 2021 Charger: Original Linde PB Charger 80 V / 90 A Mains connection: 400 V / 50–60 Hz Equipment Triplex lift mast Hydraulic fork adjustment Side shifter 1 pair of forks 1,600 mm 1 pair of fork extensions 2,400 mm Triathlon 80V battery Original Linde charger Digital driver display Inspection stickers valid until 2026 Accessories as shown in the pictures Condition Used. Very well-maintained overall condition with only approx. 351 operating hours. The forklift is clean, immediately ready for use, and only shows normal signs of wear on the forks. Availability!! The forklift will not be available until the end of August. An inspection is possible by appointment. Reservations are possible by agreement. Scope of delivery Linde E50 electric forklift 80V Triathlon battery Original Linde PB charger 1 pair of forks 1,600 mm 1 pair of fork extensions 2,400 mm Accessories as shown in the pictures Note: The trolley/table shown in the photos, on which the charger stands, is not included in the scope of delivery. Shipping: Inspection possible by appointment. Loading onto a truck can be arranged. Expedited shipping throughout Germany and Europe is possible. Subject to changes, errors and prior sale.

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, The angle conveyor from MASS is for sale: Hfodpfx Agsw Nrpbstel Type NC - SPEC 500/1800 x 600 Infeed section: 500 mm Incline section: 1800 mm Usable width: 600 mm, total width: 750 mm Conveyor speed (constant): 6 m/min Mobile base frame with brake rollers Discharge height: max. 1500 mm, min. 1100 mm Side guide: 60 mm PU belt with 30 mm cleat height, temperature resistant from -10°C to +90°C Motor protection switch with 5 m cable & CEE plug

Condition: used, Vertical milling head, milling head, angle milling head MAHO suitable for MH300 or MH400. Year of manufacture approx. 1990. Tool holder: SK 40. Quill stroke: 60 mm. Centering diameter on the flange plate: 102 mm. Outer diameter of flange: 180 mm. Bolt circle on flange plate: Ø 150 mm. Mounting holes on flange plate: 4x Ø 11 mm. - Quill feed: 0.015 / 0.03 / 0.06 / 0.12 mm/rev. - Head drive via shaft Ø 32 with 10 mm keyway. - Knurled wheel with scale for quill stroke. - Angle scale on angle milling head 2x 90°. Dimensions L x W x H: 300 x 280 x 300 mm. Total weight: 31.4 kg. In good condition. Hfsdpfxjxf Ur Nj Agtsl

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Hfodjxy Styjpfx Agtel Weight: 61 kg In good condition

Condition: used, Fixed angle clamping table, fixed machine table, clamping angle, angle table for milling machine Clamping surface: 700 x 260 mm Table size: 785 x 310 mm (external dimensions) Slot width: 12 mm Hedpfx Agoznn Hljtefl Slot spacing: 50 mm - for table mounting surface at 90° - Table top with 5 T-slots - Mounting surface 90° = 600 x 195 mm, hole spacing center-to-center 560 x 125 mm with Ø 12 mm elongated hole, 12 mm guide slot Dimensions L x W x H: 785 x 320 x 263 mm Weight: 80 kg Good condition

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die -Punch tool: Angle notching tool, counter blade only, without notching unit -Dimensions: see photos -Dimensions: 310/170/H145 mm -Weight: 24.1 kg Hfjdpfxsznircs Agtol

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die -Punch tool: Angle notching tool, counter blade only, without notching unit Hfsdpfjzm Tmnjx Agtjl -Hole spacing: 200/150 x Ø 18 mm -Dimensions: 255/200/H100 mm -Weight: 14 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die Hfjdjzm Tkgspfx Agtjl -Punch tool: Angle notching tool, notching unit -Dimensions: see photos -Dimensions: 150/130/H80 mm -Weight: 4.4 kg

Condition: used, functionality: fully functional, Hard stone angle from Johannes Fischer Aschaffenburg in laboratory quality, 350x300x60mm Perpendicularity < 2µm (1") Flatness of the measuring surfaces < 1µm Slight damage to the corners, measuring surfaces are in order Hfjdoq Tdh Njpfx Agtjl Measurement report on request for an additional charge

Condition: good (used), Welded frame size: 650 x 500 mm. Hedpfjixttyex Agtefl

Condition: good (used), Belt length: 1250 x 650 mm Welding area: 1000 x 700 mm Hedpfx Agsi D Dz Hotsfl

Condition: good (used), Format: 500x500 mm Hjdpfx Agogt Uplstjfl

Condition: good (used), Format 500 x 500 mm. Hfsdpfx Agsgt Unkotol

Condition: good (used), Format: 500x500 mm Hsdpfjgt Un Sox Agtefl

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CP3T30-120AA5V, Chicago Pneumatic Angle Turbine Grinder CP3T30-120AA5V with autobalancer with spindle lock with tool-free adjustable protective cover Turbine grinder - twice the power with less weight! Ideal tool for grinding and smoothing cast iron, steel, welds, non-ferrous metals of all kinds and stones, e.g. in steel and container construction, mechanical engineering, foundries and reinforced concrete construction Hjdpsvptx Tefx Agtefl Specifications: Speed (idle): 12000 min-1 Max. power: 2.3 kW Air consumption under load: 1.92 m³/min Air consumption idle: 0.48 m³/min Grinding wheel Ø outside max.: 125 mm Weight: 2.4 kg Spindle Thread: M14 Air connection: IG 3/8" min. hose size at (5m hose length): 16 mm Required air quality: dried and oil-free

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CP3T30-085AAV, Chicago Pneumatic Angle Turbine Grinder CP3T30-085AAV with autobalancer with spindle lock Turbine grinder - twice the power with less weight! Ideal tool for grinding and smoothing cast iron, steel, welds, non-ferrous metals of all kinds and stones, e.g. in steel and container construction, mechanical engineering, foundries and reinforced concrete construction Specifications: Speed (idle): 8500 min-1 Max. power: 2.3 kW Air consumption under load: 1.92 m³/min Air consumption idle: 0.48 m³/min Weight: 2.1 kg Spindle Thread: M14 Air connection: IG 3/8" min. hose size at (5m hose length): 16 mm Hfsdpfx Aexwn R Ajgtol Required air quality: dried and oil-free

Year of construction: 2011, operating hours: 50 h, condition: used, machine/vehicle number: 6151704890, Demonstration tool : Hfsdpfxecpbf Sj Agtol Desoutter Angel Grinder KA26085B7V Free Speed : 8500 rpm Grinding wheel maximum : 7x3 in. / 8x7 / 8 spindle thread : 5/8-11 Power : 2.82 hp Weight : 5.9 Ib.