Used Adjusting Instrument for sale (23,059)

Condition: used, Year of construction: 1997, diameter - cutter special 30 mm draw-in arbor diameter 40 mm Hnolhcdjv Uchbew Hsk clamping height 310 mm circle diameter 80-300 mm weight 30 kg

Condition: used, Year of construction: 1998, total power requirement 1 kW weight of the machine ca. 0,36 t Holhcdovdt Tmew Henk In our opinion, the machine is in good used condition and can be viewed under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 1983, longitudinal travel 1 mm cross travel 1 mm table length 1 mm weight of the machine ca. 0,5 t Hnolhou Sbc Ascdw Hjk dimensions of the machine ca. 1,5x0,8x1,9 m

Condition: defective spare-parts repository (used), Year of construction: 2002, longitudinal travel 400 mm cross travel 160 mm table length - mm table width - mm total power requirement - kW weight of the machine ca. - t dimensions of the machine ca. - m Hjleup H Rrjhcdw Hjnk

Condition: used, Year of construction: 2000, x-travel 160 mm z-travel 340 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Hnjlhsvyut Hscdw Hek Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: defective spare-parts repository (used), longitudinal travel 400 mm cross travel 160 mm table length - mm table width - mm total power requirement - kW weight of the machine ca. - t Hnslhcottccmodw Hek dimensions of the machine ca. - m

Condition: used, Year of construction: 2014, x-travel 700 mm y-axis 550 mm z-travel 400 mm max. table load 650 kg Hnslhcovza Dyodw Hok In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, 5850E/B1A1B40, Brooks Instrument, Mass Flow Controller, N2; 0-20 slpm Hnolhcovrhnzjdw Hok Model: 5850E/B1A1B40 Condition: Used

Condition: used, SLA5800 Biotech - MFC - Digitally controlled mass flow controller for gas, Mass Flow Controller elastomer-sealed mass flow controller, flow control, flow meter, flow controller, thermal mass flow BROOKS INSTRUMENT Type SLA585081BAB1A2S1 Ser. No. 01C00500222 Year of manufacture 2020 (new / unused in original packaging) SLA5800 Biotech series Option package Biotech Premium Packet Code T Mains connection 13.5 - 27 VDC (plug M8, 5 pin, male) Power consumption max. 10 watts PROFINET interface (2x RJ-45) Visual display 2 LEDs (NET / MOD) Gas connection 6 mm Swagelok Valve design Normally closed User gas O2 (oxygen) Active - Multiple / O2 (oxygen), N2 (nitrogen), CO2 (carbon dioxide), AIR (air) Calibration gas N2 (nitrogen) Flow control ranges (full scale) 20000 sccm (20 liters / minute) Maximum inlet pressure 4500 psi (300 bar) Normal operation Pressure differential 60 psig (4 bar) Control range 2% to 100% of full scale (range of mechanism) Typical accuracy from 20 to 100 % ± 0.9 % of set point for 20 to 100 % of full scale Typical accuracy from 2 to 20 % ± 0.18 % of full scale for 2 to 20 % of full scale Repeatability ± 0.2 % of the measured value Helhcdjuqgbysw Henk Resolution 0.1 % of full scale Typical response time of the controller

Condition: used, TOP100-101, Instrument Systems Optical Telescope Probe with WAT-902H Model: TOP100-101 Type: TOP100-101 Hnslsq S Tn Aehcdw Hsk Condition: Used

Condition: used, Measuring range 16 mm Hnslhcdowat D Aew Hsk Angle 60 ° weight 500 gr

Condition: like new (used), Functionality: fully functional, measuring range X-axis: 270 mm, measuring range Z-axis: 380 mm, - basic housing SK50 - CMOS color camera with a resolution of 1280 x 1024 Pixel - control via color 12.1" touch screen, keyboard or mouse - simple and fast one-handed operation in both axes simultaneously - high runout accuracy in Z 300 mm ≤ 0.005 mm - repeatability 0.003 mm - USB, RS 232, x Ethernet RJ-45 - image processing functions - manual and automatic measurement - automatic edge detection - quick and easy calibration - automatic light adjustment - reduction Hnslhcdwjwbz Ais Hok - adjustment mandrel - label printer

Year of construction: 2019, Condition: used, Power: 1 kW (1 HP) Hslhcdwev Sm Rze Honk

Condition: good (used), Here we offer a handling device from ZASCHESitec. This device was used in the production of instrument panels. Hnolhcocipw Usdw Hek It consists of the following components: KBK - FPM 10 - 7,0 x 5,0 carriage - LWK 762 x 762 Load lifting module - Z-L6 - 80/1280 - 1486 Load lifting device - GP10 Load capacity: 10 KG Scope of delivery: (ZASCHESitec handling device, technical documentation) Condition: used / used Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: used, Tool measuring instrument Make Mitutoyo Type quick set R Heljddtuyshcdw Henk

Condition: used, * Item no.: 900877, Hnjlhcjlkckfodw Hok * Designation: CnHV37-20.

Condition: ready for operation (used), Condition Used This listing is for a two stacked BD Phoenix M50 Automated Identification Susceptibility Testing Instrument The BD Phoenix™ M50 instrument provides accurate and timely identification and susceptibility results to guide appropriate therapy and patient management decisions. The system can hold up to 50 panels at a time and can be stacked to maximize limited laboratory space. AST Panels have up to 29 antibiotics on a single panel to reduce offline testing and provide a true MIC value based on current CLSI breakpoint standards. It has demonstrated performance in detecting emerging resistance. It incorporates the use of an oxidation reduction indicator, turbidometric growth detection, full on-panel antimicrobial concentrations and the BDXpert™ System. Together these make up the Phoenix Susceptibility System resulting in rapid, accurate and reliable antimicrobial susceptibility results. These results are further enhanced by specific delayed resistance features, providing additional assurance that Phoenix results are not only rapid but accurate. The inclusion of all reported antimicrobial concentrations on the panel provides the foundation for detection of emerging resistance. Hnslhcdworwbhuo Hjk Two Stacked BD Phoenix M50 Instruments with PC specifiations: Height: 42 in (107 cm) Width: 53.5 in (136 cm) Depth: 30 in (76.5 cm) Clearance (left): 3 in (7.62 cm) Clearance (right): 18 in (45.72 cm) Weight: 240 lb (109 kg) Power requirements: 90-264 VAC; 47-63 Hz 15 amp circuit

Year of construction: 2014, Condition: new, digital length measuring device make Heidenhain ID 355 533-04 Helhjb T Uqiecdw Hjnk measuring bar type LF 481 - signal 1Vpp - measuring length 200mm

Condition: good (used), Functionality: fully functional, MKS Instruments. Inc. plasma generator, AX7670 60 R, ASTRONi Model: AX767060R Type: ASTRONi Holhsuyi U Ascdw Honk 200-208V AC 50/60Hz 30A

Condition: good (used), Year of construction: 2010, Functionality: fully functional, Pyrosil ST-SystemSt 1000 HD -1B System 500 HE (Pyrosil application for UV Ink) Year: 2010 LISEC Transport Unit 33/40 Pyrosil System 500 HE (Pyrosil application for UV Ink) LISEC Transport Unit 33/45S Primer Station 500 HE LISEC Transport Unit 33/68 LISEC Transport Unit 33/28 mobile Exhaust Air Pretreatment System LISEC System Control S-LTD-235 Flame Parameters: Berner Speed 150 mm/sec 7.4 Hz Frequency at FU Helhcdovy D Tisw Hsnk 2 Flows Air Setpoint 400 l/min Gas/Air Ratio 1:21 Precursor 0.3% Primer Parameters: Primer Speed 300 mm/sec 14.8 Hz Frequency at FU Flows 2 Reservoir pressure 1 bar Atomizer pressure 2.0 bar Spray volume 25 ml/min per spray channel Control pressure below 6 bar has no influence on the spray volume. Only the valves for the spray heads will be opened.

Condition: ready for operation (used), Condition Used Hnjlowb Nv Rshcdw Hok Stock Number 413107 This listing is for a Malvern Instruments Multisizer APA2000 Particle Counter 

Year of construction: 2016, Condition: new, TA Instruments Q20 Differential Scanning Calorimeter (DSC) The TA Instruments Q20 Differential Scanning Calorimeter (DSC) is a cost-effective, reliable solution for thermal analysis. Designed for research, teaching, and quality control applications, it offers precise temperature control and accurate calorimetric measurements. Key Features & Specifications: • Temperature Range: Ambient to 725 ˚C • With Cooling Accessories: -180 to 725 ˚C • Temperature Accuracy: ±0.1 ˚C • Temperature Precision: ±0.05 ˚C Hslhcdwjv Txlmo Henk • Calorimetric Reproducibility (indium metal): ±1% • Calorimetric Precision (indium metal): ±0.1% • Dynamic Measurement Range: ±350 mW • Digital Resolution: >0.04 μW • Baseline Curvature (-50 to 300 ˚C):

Year of construction: 2019, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: Salt Bath Parts Clearner Model 1162 Serial 24048 220V 60HZ 20 A 1PH 400 TO 1000F MADE IN USA, SALT BATH PARTS CLEARNER MODEL 1162, CODE F ,SERIAL 24408 220V 60HZ 20A 1PH 400 TO 1000F CONSTANT TEMPERATURE BATH HALLIKAINEN INSTRUMENTS RICHMOND CALIFORNIA MADE IN US AWSOME PARTS CLEANIER Hnjlhcdjv Sh U Ujw Hjk

Condition: good (used), Functionality: fully functional, MKS Instruments. Inc. RF Generator 13.56MHz, 10.5kW, QL10513, SurePower Hnjlhouyi Uiocdw Hek Model: QL10513 Type: SurePower

Condition: ready for operation (used), machine/vehicle number: 7103034, Condition Used Stock Number 48091 50348 This listing is for a Biotek Instruments Vacuum pump 2 x 2 Hnjlhcdwewadfds Hok The unit is in full working condition and is ready for immediate release. BioTek Instruments GAST Vacuum Pump 7103034 Overview The BioTek Instruments GAST Vacuum Pump 7103034 is a high-performance, oil-less rocking piston compressor and vacuum pump designed for use with a variety of microplate washers, including the EL 406, 405 TS, 405 LS, and ELx405. Key Features Standard Vacuum Pump: Ideal for a wide range of applications. Oil-less Rocking Piston Compressor: Ensures outstanding performance and durability. Flexibility and Durability: Suitable for various laboratory settings. Easy to Retrofit: Simple installation and integration with existing systems. Low Exhaust Temperatures: Reduces the risk of overheating and extends the pump's lifespan. Longer Life Span: Built to last, minimizing the need for frequent replacements. Voltage: Operates at 115-230V. Max Vacuum: 26 in -hg. Sound Level: Less than 65 db(A). Product Information Compressor Type: Standard Vacuum Pump Port Size: 1/4 in NPT End Connections: NPT Phase: Single Maximum RPM: 1725 RPM; 1425 RPM Minimum Working Temperature: 5°C Maximum Working Temperature: 40°C Standards: CE; UL For Use With: 405 ls, 405 touch, el406, elx405 microplate washers Voltage: 115 - 230V Sound Level: Less than 65 db(A) Max Vacuum: 26 in -hg Specifications Weight Metric: 11.34 kg Imperial: 25 lb Dimensions Metric: 35.56 cm x 25.4 cm x 33.02 cm Imperial: 14 in x 10 in x 13 in Harmonized Code: 84141000 Harmonized Code Details: Vacuum pumps; liquid ring vacuum pumps and other rotary positive displacement pumps Availability . Sellers typically respond within 24 hours to assist with any inquiries or specific configurations.