Used Aufspannen Angle Adjustable for sale (25,511)

Condition: used, Clamping angle for workpiece clamping, measuring device, for vice -Hole circle: 140 mm -Shaft: Ø 30 mm -Groove: mm Djdpfx Aiec N Dp Heijkw -Surface: milled -Dimensions: 182/195/H180 mm -Weight: 8 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Manufacturer Motor Marelli Motori Type: TM96010 -Manufacturer transmission Motovarici type: TK/002/R -Motor power: 0.22 kW -Speed range: 43.1-200 RPM -Motor: adjustable -Drive shaft: Ø 19 mm Dodpfxec U Rias Aiiskw -Dimensions: 415/135/H180 mm -Weight: 14 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed adjustable: 64 - 640 rpm -Voltage: 220/380 V -Power: 0.25 kW -Construction: B3/B5 -Shaft: Ø 14/27 mm Dkedpod Rhdyefx Aiijw -Dimensions: 475/220/H160 mm -Weight: 18 kg

Year of construction: 2022, condition: new, machine/vehicle number: 2022022209, Aluminum angled conveyor belt with substructure Conveyor length: 1500mm flat + 4000mm rising Pitch angle in bend 45°C Discharge height: approx. 3000mm Height of the horizontal top edge 200mm PVC conveyor belt Dkedpfx Aijh Elhzoijw Conveyor belt EM 15/2 0+17 PVC green Belt width 400mm T30 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+180-5+35+70 Full-surface underlay sheet Drive: Motor approx. 0.25KW Belt speed approx. 0.4m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54 Incl. construction for hanging the overbelt magnetic separator in the horizontal.

Year of construction: 2022, condition: new, Aluminum angled conveyor belt with substructure Conveyor length: 1000mm flat + 2400mm rising Pitch angle in bend 45°C Discharge height: approx. 2000mm Height of the horizontal top edge 300mm PPU conveyor belt FDA Food compliant Conveyor belt EM 15/2 0+17 PU blue 7 white Belt width 400mm T20 studs welded - pitch 202mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 30mm sidewall high frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement -70/+35/-5/+190/-5/+30/-70mm Full-surface underlay sheet Dkedpfx Asht U Tdoiijw Drive: Motor approx. 0.25KW Belt speed approx. 0.3m/sec Connection 220/400V, 50Hz protection class IP54 Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grid, magnetic grid, metal separator, block magnet, filter systems

Condition: new, Year of construction: 2024, XX-11136 End milling machine FOM INDUSTIRE MISTRAL 26A Machine in stock Standard configuration: Dodpfx Aijhyugljijkw - End milling angle 45° Rh, 90°, 45° Lh and intermediate angles - Milling tool unit rotation speed 7000 rpm - Max. milling tool size Ø 175 mm - Automatic feed with rapid approach controlled by milling tool unit photocell - Quick change milling tool unit - Milling tool unit balancing system - Milling units magazine with 9 slots - Spray mist blade lubrication system - Carriage stroke: X max= 350 mm - Milling depth: Y max = 65,5 mm - Maximum milling unit height: 125 mm - Working capacity: see attached diagram - Patented system that allows profile positioning without the need for goniometries - Set up for the extraction of chips and fumes - Integral safety casing around work table with opening lock - Double working pressure servo-controlled in low pressure - In set Cutter sleeve for milling units - Horizontal and vertical vices - 8-positions star-shaped length stop

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, Additional information Frame Steel welded construction made of fine-grain steel, hot-dip galvanized, flat platform without edge rim, slope of the loading area towards the rear axle by approx. 8° downwards. Longitudinal beams made of steel profiles, steel frame hot-dip galvanized, with NIRO sheet metal at the bend as a rope guide - flush with the floor. For trucks with wheelbase: 2nd axle 1,795 mm / 2nd to 3rd axle 4,105 mm and 3rd to 4th axle 1,350 mm Tow hitch Tow hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, including mounting and electrical system with 7-pole socket Accessories/Modifications 2 holders for wheel chocks, aluminum side underrun protection, foldable - These are taken over from the truck! Steel underrun protection, quarter-shell fenders with mud flaps - These are taken over from the truck! Storage box Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock 1 holder for 3 pieces of gasoline canisters 1 stainless steel storage box, w=600/h=400/d=500 mm, with polished door, including locking mechanism, contains control valve and electro-hydraulic pump unit. Control box with all-round door seal and sealing sleeves on the back Electrical system Adjustment of the existing tail lights, 2 additional LED work lights, recessed in the front wall switched via parking lights with switch on the front wall outside on the driver's side, 1 LED work light, at the rear, with integrated reversing camera including color flat-screen monitor, screen with suction cup holder and power supply via 24 volts, voltage divider 24/12V, 1 7-pole 12V socket = adapter Floor Mega Grip made of interlocking galvanized grating, steel grating 50/4 including with a mesh size of 50 mm. Top side with anti-slip interlocking, continuously laid over the entire main frame platform Tie-down eyes 12 pairs of tie-down eyes in the outer frame, freely pivotable - each 10 tons. 1 at the very front and the last one at the very rear. 1 tie-down eye at the very rear in the middle for attaching the winch cable 12 tie-down eyes recessed in the center of the floor, each 5 tons. Front wall Front wall made of steel sheet, height 1,500 mm. Fixed with corner pillars at the front wall height. Each 2 x 12 mounting brackets for lashing chains mounted on the left and right on the front wall Djdpfsk Unitsx Aiijkw Winch Electric winch, 24 volts, pulling force approx. 6,350 kg, mounted in the center on the front wall (recessed with loading bridge), operated with a wireless remote control, rope length min. 35 m x 9.5 mm, with rope window, with rope pressure plate, including overload protection, rope free-running clutch, hand switch with approx. 5 m control lever, acceptance of the winch, civil engineer's test report, test book, operating manual Ramps Length 3,500 mm - 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also when loading with ramps), electro-hydraulically foldable and laterally adjustable - including electro-hydraulic pump unit. Ramp angle approx. 8° with lowered rear axle Ramp surface made of steel grating, hot-dip galvanized, with anti-slip interlocking. Ramps can be slid together to approx. 170 mm, ramp extension hydraulically. Ramp prepared for operation on a loading ramp with full load capacity. Ramp locking with 2 tension straps. Ramp tip offset for resting on loading ramps. Labeling of the ramp operation. Lowering brake valve for lowering the ramp Support Adjustable support le

Condition: used, Clamping angle for workpiece clamping -Dimensions: W/H/L 250/775/245 mm -Thickness: 27 mm -Surface: milled Dksdedzd Hvjpfx Aiiow -Thread holes: M16 -Number: 2x mounting brackets available -Price: per piece -Weight: 98.5 kg/piece

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 500 x 200 mm -4x T slots: 14 mm Doded Dzlqopfx Aiiokw -Clamping angle: rotatable, swiveling, tiltable -Foot recording: mm -Dimensions: 500/300/H210 mm -Weight: 50.5 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear Lenze type: 275-HD-283-112-4 -Manufacturer gear Lenze type: 12 435 28 10 HU Dkedpfxjd D Nfks Aiijw -Manufacturer Motor Bauknecht Type: 112M R 4 / 4-75 -Motor power: 4 KW -Speed range: 7.4-42.3 rpm -Motor: adjustable -Number: 1 piece of motors available -Price: per piece -Hollow shaft: Ø 70 mm -Dimensions: 620/600/H560 mm -Weight: 152 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter, angle milling cutter, shell angle milling cutter -Cutter head: face milling cutter SK50 with extension -Type: Ø 140 mm -Recording: SK50 Dkodpfx Aiou Uwvnoijw -Dimensions: Ø 140 x 335 mm -Weight: 13.1 kg

Condition: as good as new (ex-display), Year of construction: 2022, Transnorm angled-belt conveyor 45° 1400-1050-800 RA2304 Exhibit Make: Transnorm Year of manufacture: 2022 Inlet angle: 45 Length center: 1400 mm Belt width (RB): 800 mm Frame height: 270 mm Nominal/external width (NB): 1050 mm Conveying speed: 0.717 mm/s V230/400 kW 1,5 Overall height side wall: 300 mm Scope of delivery: with motor and side guides (if required, please ask) Optional: Supports Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. Dsdpfx Aisud Dzveiokw We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Lenze, adjustable geared motor with brake -Gearbox: Type GST05-2W VBR 1B i= 56.875 -Adjustable gear: GST05-2K VBR 071-12 10B 59 - 11 rpm -Spring-loaded brake: -Engine: Type MDERABR 071-12 0.25 kW / 1400 rpm -Shaft: Ø 25 x 45 mm -Design: B3 Djdottil Eepfx Aiiskw -Dimensions: 430/280/H225mm -Weight: 21.7 kg

Condition: good (used), Year of construction: 1995, Angle unit for window production , consisting of : Dedpjtqft Ijfx Aiijkw Slotting unit for 8 tools with hydraulic stroke 75 mm (clamping height 600 mm) Milling unit for 4 tools with hydraulic stroke 80 mm (clamping height 320 mm) with return with IV 68 tools

Condition: used, Year of construction: 1970, Working width 2400 mm Roller width 2600 mm Number of rollers 2 Stück Supporting roller - dia 295 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 220 mm Roller covering - ebonit 100 Grad shore Pressure line 50 N / mm Pressure total 13 to Dkedpfxjtv Ibqo Aiijw Cloth guiding system for woven fabrics Breithalter, Leitwalze Drive side nach Auftrag Operting side nach Auftrag Drive shaft dia 80 mm Hydraulic unit for combined pressure • 2-Bowl-High efficiency squeezer with one "Swimming Roll" (S-roll), Machine will be completely overhauled before delivery, we supply with warranty. (Photo shows a similar machines in delivered condition). without drive,

Year of construction: 1983, condition: used, Working width 3400 mm Roller width 3600 mm Number of rollers 2 Stück Supporting roller - dia 340 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 270 mm Roller covering - ebonit 100 Grad shore Pressure line 50 N / mm Dkedpjtv Iggsfx Aiijw Pressure total 18 to Cloth guiding system for woven fabrics Breithalter, Leitwalze Drive shaft dia 80 mm Hydraulic unit for separately pressure in inox Drive side links Operting side angeben • 2-Bowls-Finishing padder with 1 new swimming-roll (s-roll) and supporting roll; • new hydraulic control and pressure application for s-roll • drive motor and new electric control • machine will be completely refurbished before delivery • we grant a warranty for a period of 12 months

Condition: excellent (used), Year of construction: 2001, Working width 3400 mm Roller width 3600 mm Number of rollers 2 Stück Supporting roller - dia 340 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 270 mm Roller covering - soft rubber 75 Grad shore Pressure line 50 N / mm Pressure total 18 to Clouth guiding system for knitted fabrics geb. Breitstreckwalze Liquor trough with guide roll + Verdrängerkörper Operting side links Drive side rechts Drive shaft dia 80 mm Hydraulic unit for separately pressure aus Edelstahl Djdpfx Aetv Imtjiiokw main drive motor 15 kW total power requirement 20 kW weight of the machine ca. 6 t range L-W-H 4,0 x 2,2 x 1,9 mm • 2-Bowl-Finishing-Padder with Supporting roll and S-Roll • driven expander in front of the squeezing nip, with adjustable guide roll for adaption of the enlacement at the expander roll. • Liquor trough pneumatically lift- and lowerable, with 1 guide roll at trough entrance • 3-Roll-compensator at outlet of the machine, self-aligning roll can be pneumatically loaded and unloaded • Machine in complete condition, New FI control is still being added

Condition: used, Year of construction: 2025, Working widths 5400 mm Roller width 5600 mm Number of rollers 2 Stück Supporting roller - dia 490 mm Dkjdpfx Aou Rt R Njiiow Roller covering - soft rubber 75 Grad shore Swimming roll - dia 340 mm Roller covering - soft rubber 75 Grad shore Pressure line 35 N / mm Pressure total 19 to Cloth guiding system Breithalter,1 Leitwalze Liquor trough with guide roll heb + senkbar Drive side nach Auftrag Operting side nach Auftrag Compensator pneum. Entlastung Drive shaft Durchmesser 70 mm required power 30 m/min =10 kW Hydraulic unit for combined pressure aus Edelstahl • 2-roller padder with supporting roll and swimming roll, Küsters system, • additional new frequency drive for fitting the machine into a system is possible. • Photos show similar machines in delivery condition • Warranty: 12 months • This machine is completely manufactured after receipt of order.

Condition: excellent (used), Year of construction: 1992, beautiful machine in good condition as it came from a small business with little use. with IV 68 tool is still in operation ready for demonstration Djdpfxsu S Afce Aiijkw

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Press Pressing force: 63 t Speed range: 140–800 min⁻¹ Ram stroke: 6–60 mm Ram adjustment: 80 mm Pin hole diameter: 40 mm Table Table dimensions: 800 × 580 mm Table slots: 6 Feed Feed length: 160 mm Material width: 160 mm Belt speed: 80 m/min Belt cross-section: 500 mm² MACHINE DETAILS Dodpfx As Adzqaeiiokw Manufacturer: Haulick + Roos Type: RVD63-800 Year of manufacture: 1982 Machine number: 282612 Dimensions (L × W × H): 3,500 × 2,400 × 3,000 mm Weight: 6,000 kg EQUIPMENT Feed

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Punching machine Speed: 30–400 rpm Drive power: 18 kW Ram adjustment: 0–50 mm Table dimensions: approx. 740 mm (?) Feeder Feed length: 160 mm Dkjdpfe Adzq Hsx Aiisw Material width: 160 mm Material thickness: 3 mm Strip speed: 35 m/min MACHINE DETAILS Manufacturer: Haulick + Roos Type: 720 NS Machine number: 1.204.027 Operating voltage: 380 V Rated current: 80 A Dimensions (L × W × H): 3,500 × 2,000 × 3,000 mm Weight: 5,000 kg EQUIPMENT Haulick + Roos feeder, type RS160SL2738

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, perforated sheet metal floor, badge_tracstrap Features: - TracStrap securing system - Perforated sheet metal floor Dkodpfszy A A Sox Aiijw - Shovel rack Net price: €6,802.52 / Gross price: €8,095.00 Article number: DPT235321700.23 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: No prior registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 320 x 170 x 20 cm • External dimensions (LxWxH): 512 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Tare weight: 781 kg • Payload: 2,719 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel mudguards with non-slip perforated profile • Reinforced perforated steel floor inside • Screen-printed wood floor in the middle, 18mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal supports under the loading area • Heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • Stable ACME locking system: closes quietly, loading ramps are held in place by safety locking mechanisms, rubber buffer dampens noise • Very low chassis for low approach angle • Excavator shovel rack • 10x lashing points on the side wall (1000dAN/kg), TÜV certified • Free choice of lashing points when lashing to the perforated steel floor • TracStrap kit (Heavy-Duty), TÜV-certified cargo securing system • Revolutionary system • First-class securing of tracked vehicles • Ready for departure within a very short time • Front wedges are adjustable and form the basis for positive cargo securing • 2x lashing straps (LC 5000 daN) for lashing over the tracks • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side wall • Reverse automatic • ALKO overrun device and parking brake • Steel cast coupling head with integrated high-security lock ALKO • Very stable V-drawbar REINFORCED • 13-pin plug • Complete LED lighting: Extremely bright, long-lasting and reliable. • LED side marker lights at the rear • Reversing lights • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request specific features! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Perforated steel floor, badge_tracstrap Features: - Perforated steel floor - Shovel holder - TracStrap securing system Net price: €6,449.58 / Gross price: €7,675.00 Article number: DPT235321700.22 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 320 x 170 x 20 cm • External dimensions (LxWxH): 512 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Tare weight: 736 kg • Payload: 2,764 kg • Chassis: Low-loader (wheels beside the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted Dksdjzy Dq Ropfx Aiiow DESCRIPTION • Robust steel fenders with non-slip perforated profile • Reinforced perforated steel floor inside, laterally • Screen-printed wood floor in the center, 18mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal beams under the loading area • Perforated steel individual ramps, steel galvanized, adjustable, L=1.62m • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamping locks, rubber buffer dampens noise • Very low chassis for a low approach angle • Excavator shovel holder • 10 lashing eyes on the side panel (1000dAN/kg), TÜV certified • Free choice of lashing points when lashing in the perforated steel floor • TracStrap Kit (Heavy-Duty), TÜV-certified cargo securing system • Revolutionary system • First-class securing of tracked vehicles • Ready for departure in no time • Front wedges are adjustable and form the basis for positive load securing • 2x tension straps (LC 5000 daN) for lashing over the tracks • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side panel • Reversing automatic system • ALKO overrunning device and parking brake • Coupling head made of cast steel with integrated high-security lock ALKO • Very stable V-drawbar REINFORCED • 13-pin plug • Complete LED lighting: Extremely bright, long-lasting and reliable. • LED rear marker lights • Reversing lights • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to make requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer and repair workshop - for over 30 years. - Errors, omissions and prior sale excepted.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Air suspension + 100 km/h Equipment: - Approach angle 4° - Automatic control - Electrically lowerable Net: €10,752.10 / Gross: €12,795.00 Article number: TMA235371500.01 Technical data: • Brand: Tohaco • Model: MA235/3715 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: Without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (L x W x H): 370 x 150 x 10 cm Dksdpjzy Dtrefx Aiiow • External dimensions (L x W x H): 506 x 208 x 95 cm • Loading height of the floor: 0 cm • Permissible total weight: 3,500 kg • Tare weight: 674 kg • Payload: 2,826 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/50R13C • Suspension: VB-Airsuspension air suspension + 100 km/h • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Hot-dip galvanized chassis • Very stable steel frame, welded • Rear end angled • Very stable V-drawbar • Plastic mudguards • Wheel suspension, independently air-sprung • Incl. 100 km/h approval • Loading area can be lowered to the road surface or the ground by means of air suspension • Approach angle approx. 4°. • Air suspension fully electronic • 4 air springs • 4 adjustable shock absorbers • Emergency valves for external filling of the air suspension • Tires 195/50R13C • Polyamide air hoses • Connections of the air suspension system made of stainless steel • Function only with a fully occupied 13-pin socket • Mounting of the suspension system completely under the loading area • 12V AGM vehicle battery 75 Ah • 2 sensors for height adjustment • Electronic height adjustment and setting of the driving level of the loading area • Electronic remote control in the drawbar • Compressor 12V 18-Bar - Made in Germany • Air tank 10 liters • Charging socket for external battery charger • ASCU control system • 18mm multiplex floor panel, made of birch wood, with non-slip coating • Lashing rails, left, right and front • Foldable license plate holder with LED lighting • Support wheel, automatic • Oversized safety lighting • Integrated rear fog lamp • Reversing light • 13-pin plug _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request specific features! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). Dkjdpfxof Eknys Aiiow • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: X55 Length: 4.5m Linear Unit: ProfiStop Alpha Material Length: 3180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.