Angle bender

DAKO 280-100

Year of construction: 1991, condition: good (used), machine/vehicle number: 900 1241, disk of circular saw-Ø: 275 mm cutting area at 90° round: 90 mm cutting area at 90° square: 75 x 75 mm cutting area in mitre at 45° square: 75 x 75 mm disk rotations: 40/80 upm engine: 380 V, 1/1/2 kW space needed: 700 x 600 x 1580 mm weight: ca. 180 kg Bdodpsm Twgwefx Amyof

Condition: used, Year of construction: 1977, Technical details: x-travel: 1050 mm y-travel: 500 mm z-travel: 500 mm spindle taper ISO: SK40 spindle head swivable left - right: 90 ° quill travel: 180 mm range of revolution per miute: 36 - / 18 step U/min feed:: X+Z: mm/min feed:: Y: - 900 mm/min. rapid traverse : X/Z: / Y: 900 mm/min table surface area: 1200 x 550 mm total power requirement: ca. 10 kW machine weight approx.: 4400 kg dimension machine xH: 3,1 x 2,5 x 2,2 m Console design with tilting, tilting and swiveling table, as well as adjustable vertical milling head. Machine with 3-axis digital readout (with resolution 0.01mm) with feed and individual drive of all three axes stepless feed X-axis: Support lengthwise = 700mm; univ. milling table lengthwise 350mm = total lengthwise: 1050mm Bdodpfju Ndd Rsx Amysf Accessories: Comparable with the pictures *

Condition: new, Year of construction: 2026, CORMAK ZS-40HS Pillar Drill The CORMAK ZS-40HS is an advanced pillar drilling machine for metalworking, designed for intensive industrial use. Featuring a hardened gear transmission system, large drilling capacity, and tapping capability up to M32, this model is a reliable solution for manufacturing plants, metalworking shops, and maintenance departments. Key Advantages Large drilling capacity – up to 40 mm – suitable for machining a wide range of materials and thicknesses. Tapping function with automatic spindle reversal – enables fast and efficient thread cutting up to M32. Precision oil-bath gearbox – 6 spindle speeds provide optimal speed adjustment (95–1600 rpm) for various machining operations. Rotating head with height adjustment – increases flexibility and allows drilling at different angles. Rigid 115 mm diameter column – ensures excellent stability even under maximum load. Large worktable with height adjustment and vise mounting capability – facilitates machining of large workpieces. Construction and Technology The CORMAK ZS-40HS industrial drill press is built with heavy-duty cast iron components and a reinforced 115 mm diameter column, ensuring maximum rigidity and vibration reduction. The transmission system is based on hardened, precision-ground gears, providing exceptional durability and reliable power transmission. The 120 mm spindle travel and MT4 spindle taper allow the use of a wide range of drill bits and tapping tools. Precision and Performance The CORMAK ZS-40HS metalworking pillar drill offers high drilling accuracy and repeatability thanks to its mechanical gearbox and precision handwheel with depth scale. Flexible adjustment of both the drilling head and worktable height allows the machine setup to be tailored to specific machining requirements. The powerful motor (1.1 kW continuous duty S1, 1.6 kW intermittent duty S6) ensures efficient operation even when drilling large diameters. Bodpfsriduxox Amysdf Applications The CORMAK ZS-40HS column drilling machine is designed for industrial applications, particularly in: Manufacturing and processing plants Metalworking workshops Maintenance departments Tool rooms Technical schools and training centers Standard Equipment 16 mm drill chuck MT4 arbor MT3 and MT2 reducing sleeves Drift key for arbor removal Worktable with mounting T-slots Handwheel with depth scale for drilling depth control Technical Specifications Parameter Value Maximum drilling capacity 40 mm Maximum tapping capacity M32 Spindle taper MT4 Spindle travel 120 mm Column diameter 115 mm Spindle speed range 95–1600 rpm Number of speeds 6 Worktable dimensions 575 × 354 mm Base dimensions 385 × 330 mm Motor power S1: 1.1 kW / S6: 1.6 kW Power supply 400 V / 50 Hz Overall height 2100 mm Weight 350 kg

Condition: good (used), Cutting performance: Flat bar shear Blade length: 250 mm Sheet metal up to: 13 mm Flat bar up to: 150 x 16 / 200 x 13 mm Profile steel shear Angle iron up to: 110 x 10 mm Mitre cut: 45° up to 90 x 9 mm T-iron up to: 110 x 10 mm Mitre cut: 45° up to 90 x 9 mm U- and I-beams up to: NP 18 Stroke rate: approx. 30 1/min. Round bar shear Round bar up to: 42 mm Square bar up to: 38 mm Notching tool Sheet metal up to: 12 mm Notch width up to: 50 mm Bedpoh Uhb Sefx Amyjdf Notch depth up to: 85 mm Punching tool Reach: 370 mm Punching force: approx. 50 t = 25 Ø x 16 mm / 20 Ø x 19 mm Drive power: 3.0 kW Weight: approx. 2,200 kg Equipment - Hand and foot actuation - Support table on the punching tool - Various additional tool holders - Various replacement blades - Extensive accessories

Year of construction: 1976, condition: ready for operation (used), machine/vehicle number: 12321, Hydraulic unit, consisting of an oil tank with a drive motor mounted on it with a flanged hydraulic pump and 2 valve blocks above it 1. valve block: Operating pressure 160 bar Delivery rate 20 l / min 2. valve block: Operating pressure 319 bar Bdjdpfx Ajghgtromyjf Drive motor KATT: 220/380 V, 1420 rpm, 2.2 kW Required space: 700 x 620 x 1050 mm Weight: including hydraulic oil (90 l) 193 kg

Condition: used, Year of construction: 1991, width of the strips 150 mm band length 2.000 mm motor 400 V loading area 450 x 160 mm Bedpfx Amsy Ty A Esyedf total power requirement 4,0 kW dimensions of the machine ca. 1,10 x 0,70 x 1,15 m - Serial-No.: 200.184

Condition: good (used), Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate -Projection: 535 mm -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm Bodpfx Aoik Sl Hjmyjdf -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos -Total dimensions: 2200/2020/H2110 mm -Weight: 3145 kg

Condition: good (used), machine/vehicle number: 550C08, A used PEDDINGHAUS punching machine with a large stroke and a large support table with stops. Punching force: 45 tons. Bsdpfx Amjd Hxrteyjdf Stroke rate: 40 strokes/min. Stroke: 762 mm. Working height: 1110 mm.

Condition: new, Year of construction: 2025, functionality: fully functional, table size: 800 x 240mm table longitudinal movement range: 400 mm table transverse movement range: 230 mm max. drilling diameter in normal steel D30 mm max. drilling diameter at horizontal head D25 mm distance between table plane and spindle face 60 – 360 mm speed range: 80 – 2200 rpm max. vertical spindle speed 100 – 2000 rpm max. horizontal spindle speed 60 – 1350 rpm spindle taper ISO40 spindle stroke 120 mm power 2.2 / 1.5 kW drilling capacity dia. 50 mm thread drilling capacity max. M16 dimensions 1300 x 1100 x 2200 mm (w x d x h) weight approx. 900 kg Accessories - 3-way SINO DRO system - 90 degree rotatable head bracket - 2 reducers (ISO40/MK3, ISO40/MK2) - drill head with shank, diameter 3 – 16 mm - 2 horizontal milling spindles Bdedpoyr Ib Eofx Amysf - 1 15-piece chuck set diameter 2 – 26 mm - work lamp - cooling water system

Condition: new, tube diameter 1/4" max. 2" Zoll wall strength max. 3,0 mm engine 400Volt / 1,5KW weight 90 kg dimensions 07 x 0,4 x 0,3 m Pipe notcher Maximum wall thickness 3.0 mm Bodpfsv Skzksx Amyodf Suitable for the following pipes: 1/4", 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"