Used Arburg A 221 75 350 Art 617 for sale (326)

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) Lodpfoyxdwdox Afaohf • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: used, Year of construction: 2003, Arburg injection moulding machine available for immediate purchase. Machine is still in operation. Viewing possible upon appointment. Full technical details in the attached documents/pictures. Clamping force (max.): 3200 kN Mold opening force (max.): 130 kN Lhodpeyw Snbsfx Afajf Opening stroke (max.): 700 mm Ejector force (max.): 100 kN Ejector stroke (max.): 250 mm Screw diameter (mm): 60/70/80 Effective screw length (L/D): 23/20/17.5 Shot volume (cm³): 792/1078/1407 Injection pressure (bar): 2500/2000/1530 Injection flow (cm³/s): 224/306/400 Distance between platens (max.):: 1000–1400 mm

Condition: used, Year of construction: 2008, screw size 18 mm Ljdpeywzv Ijfx Afajhf closing pressure 250 kN opening stroke max. 350 mm mould space 200 mm control Selogica Number of working hours 52.492 h ARBURG ALLROUNDER 270 S 250-70 – Injection Molding Machine – Year ofManufacture: 2008 – Excellent Condition A reliable and proven ARBURG ALLROUNDER 270 S 250-70 injection molding machine, manufactured in 2008, is for sale. The machine is ideal for producing precise plastic parts in small to medium-volume production runs and impresses with its robust construction and the renowned ARBURG quality “Made in Germany.” Technical Highlights: - Clamping force: 250 kN - Injection unit: Size 70 - Screw diameter: approx. 18–25 mm - Injection pressure: up to approx. 2,500 bar - Column spacing: approx. 270 x 270 mm - Platen size: approx. 380 x 380 mm - Connected load: 53 kW Electrical specifications: - Operating voltage: 400 V / 50 Hz - Control voltage: 230 V / 24 V - Total current consumption: 89 A Additional information: - Year of manufacture: 2008 - Manufacturer: ARBURG (Germany) - Machine is robust, durable, and easy to maintain - Ideal for technical plastic parts and precision applications Advantages: - Proven SELOGICA control system (standard for this series) - Compact design - High process reliability - Long-term availability of spare parts guaranteed Viewing available by appointment. Additional information, photos, or videos available upon request. - Operating hours: 52,492 hours, 7,085,048 cycles - Centring ring mounts: ø125 mm - Blowing unit fitted

Condition: excellent (used), Year of construction: 2019, operating hours: 8,250 h, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, total length: 4,110 mm, total width: 2,650 mm, total height: 4,810 mm, overall weight: 22,000 kg, clamping force: 2000 kN size of mould plates h x v: 1772 x 800 mm min. mould height: 400 mm max. open daylight: 900 mm opening stroke: 500 mm round table diameter: 2000 mm screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar equipment included rotary table screen text german screen text english CEE-socket 16A core pulling hydraulically 4x air valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface robot EUROMAP 67 interface EUROMAP 73 interface OPC measures of machine l x w x h: 4.11m x 2.65m x 4.81m total weight: 22000KG Lsdpfsyv D T Tjx Afajhf

Condition: good (used), Year of construction: 2012, operating hours: 43,331 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 45 mm, clearance between the columns: 630 mm, displacement volume: 318 cm³, injection pressure: 2,470 bar, warehouse no.: 503604 manufacturer: ARBURG type: Allrounder 630 S 2500-800 controller: Selogica year of construction: 2012 operation hours: 43331 h clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 900 mm min. mould height: 300 mm max. mould height: 700 mm max. open daylight: 1300 mm opening stroke: 600 mm screw diameter: 45 mm swept volume: 318 ccm injection pressure: 2470 bar equipment included screen text german core pulling hydraulically 2x machine incl. belt conveyor machine incl. Handling machine incl. safety fencing Anti vibration mounts measures of machine l x w x h: 6.12m x 2.25m x 2.21m total weight: 12200KG technical data robot-system handling type: Linearroboter manufacture: Arburg controller: Multilift year of construction: 2012 Lhodoyvzyqjpfx Afaof X axis: 400 mm Z axis: 1400 mm C axis rotation: 90 ° total weight: 450 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 38,000 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 392 cm³, injection pressure: 2 bar, ejector force: 225 N, ejector stroke: 90 mm, plate length: 900 mm, plate width: 900 mm, total length: 6,400 mm, total width: 1,950 mm, total height: 2,210 mm, overall weight: 12,140 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 900 mm, Equipment: documentation/manual, clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 900 mm min. mould height: 300 mm Ljdpfx Afeyvzykjaohf max. mould height: 700 mm max. open daylight: 900 mm opening stroke: 600 mm screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar equipment included: screen text german CEE-socket 16A CompactFlash interface for data storage core pulling hydraulically 1x air valve 2x machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface EUROMAP 67 interface OPC Schuko-socket 10A selection unit measures of machine l x w x h: 6.4m x 1.95m x 2.21m total weight: 12140KG

Condition: excellent (used), Year of construction: 2013, operating hours: 19,500 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 45 mm, Very low hours Arburg 570 E 2000-800 moulding machine fitted with Wittmann Primus 16T robot Arburg 570 E 2000-800 moulding machine specs; Hours = 19,800 Year = purchased new in December 2013 Tonnage = 200 Screw diameter = 45mm Shot weight (g PS) = 291 Wittmann Primus 16T robot specs; Hours = very low Lodpfoyxhaisx Afajhf Year = purchased new in June 2021 Travel = Z=2000mm, Y=1000mm, X=590mm comes with integrated conveyor and cell panels

Condition: new, Year of construction: 2010, operating hours: 72,154 h, clamping force: 800 kN, screw diameter: 25 mm, displacement volume: 54 cm³, ARBURG Allrounder 900 T 800-150 Stock no.: 503576 Manufacturer: ARBURG Model: Allrounder 900 T 800-150 Control system: Year of manufacture: 2010 Operating hours: 72,154 h Technical Data – Clamping Unit Clamping force: 800 kN Tie bar spacing (h x v): 900 x 900 mm Min. mould height: 250 mm Max. daylight between platens: 550 mm Opening stroke: 300 mm Rotary table diameter: 900 mm Lodpfxoytd Spo Afaehf Ejector stroke: 150 mm Ejector force: 46 kN Centric location, moving platen (D): 90 mm Centric location, fixed platen (D): 90 mm Technical Data – Injection Unit Screw diameter: 25 mm Shot volume: 54 ccm Injection pressure: 2,500 bar Screw length: 24 l/d Screw torque: 210 N Plasticising rate: 49 g/s PS Free-flow injection rate: 80 g/s PS Dimensions & Weight Machine dimensions (LxWxH): 3.8m x 1.85m x 2.15m Total weight: 5,000 kg Equipment Display text in German 1x air valve Machine with rotary table Machine with water manifold Levelling elements BDE interface

Condition: ready for operation (used), Year of construction: 2018, operating hours: 58 h, General Data Measurements width 4360 mm Measurements depth 1718 mm Measurements height 3910 mm Machine weight 7600 kg Injection Unit Screw diameter 35 mm Injection pressure 2500 bar Clamping Unit Clamping force 1000 kN This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. Machine needs to be CE certified by the customer, we have a quote from a third party starting at 2.000€. Application Types Lodox D Nc Hjpfx Afaehf Injection Moulding

Condition: ready for operation (used), Year of construction: 2021, clamping force: 1,600 kN, overall weight: 5,900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) Lhodpfx Aox D E Dysfaef • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information Screw Diameter: 400 unit: 35 / 40 / 45 mm Injection Pressure (Max.): 400: 2500 / 2000 / 1580 bar Shot Weight (Max. g PS): 400: 141 / 184 / 232 g Heating Output 400: 9.7 kW | 5 zones Net Machine Weight: 400: 5900 kg

Year of construction: 2007, condition: ready for operation (used), This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine. • Drive technology: • Electromechanical main movements by servo drives: dosing, injection, mold open/close, ejector • Hydraulic movement for nozzle displacement Lhsdpfxsx D Hgvj Afaof • Thermoplastic processing • Small hydraulic unit with accumulator, 5.5 kW, 10 cm³ pump (Pos 132/22) • Machine platens with centering ring D125 mm (Pos 356/11) • Injection unit (servo-controlled): • Horizontal 400 injection unit • Modular plasticizing unit with central coupling and adaptive temperature control • Plasticizing assembly D25 mm, high wear/corrosion resistance; open nozzle (220/25), flat nozzle tip (300/00), heater band (320/00) (Pos 060/25) • Heater band temperature up to 450 °C (Pos 427/02) • Standard drive coupling, double-flat (Pos 061/10) • Without hopper (Pos 600/06) • Servo-regulated, programmable nozzle contact force (Pos 408/03) • Clamping unit: • Five-point double toggle with servo-electric adjustment • Electric mold height adjustment • Prepared for mounting a linear robot on the fixed platen • Mold protection via ejector position monitoring (Pos 605/05) • Machine feet (Pos 605/03) • Quick coupling for ejector bar (Pos 605/06) • Electric ejector with position control (Pos 381/05) • Programmable hydraulic core for parallel movements (Pos 382/00) • Air blow unit 1 with pressure reducer (Pos 361/01) • Machine cooling circuits, regulated and programmable (Pos 525/02) • Cooling water manifold with 4 manually adjustable circuits (Pos 512/04) • Control, electrical cabinet, interfaces: • Selogica control • Software packages (Pos 555/01–555/07): Extended mechanical cycle controls; Extended movements; Production control; Optimization/Operator assistance; Quality assurance control; Documentation • Temperature-regulated electrical cabinet (Pos 605/07) • Selogica Direct, French language (Pos 131/05) • Flash card reader (Pos 455/05) • Operator authorization by card, Euromap 65 (Pos 455/06) • Acoustic alarm (Pos 457/00) • Additional socket combination with RCD (Pos 444/01) • 12 mold temperature measurement zones (Pos 469/12) • Additional heater band for nozzle (Pos 468/01) • Interface for HB-Therm mold temperature controller (Pos 453/01) • USB serial interface for printer (Pos 454/03) • Robot interface Euromap 67 (Pos 425/05) • Electrical and mechanical preparation for external robot (Pos 425/02) • Water shut-off valve (Pos 501/01) • Interface for Thermolift dryer (Pos 464/01) • Interface for color dosing unit (Pos 493/00) Additional equipment • Electric conveyor belt, programmable (Pos 412/02) • Sorting flap for separating good/bad parts (Pos 375/00)

Year of construction: 2007, operating hours: 88,893 h, condition: ready for operation (used), controller manufacturer: HAITIAN, This Arburg A470 C 1500-400 was manufactured in 2007. It features a Haitian handling system installed in 2022, a protective enclosure, and a conveyor belt for parts storage. With 88,893 operating hours, consider the opportunity to buy this Arburg A470 C 1500-400 hydraulic injection moulding machine. Contact us for more information. Aditional information Lhjdpfx Afex D Rbqeajf • Haitian handling system • Protective enclosure • Conveyor belt for parts storage

Year of construction: 2020, condition: ready for operation (used), overall weight: 28,400 kg, This Arburg Allrounder 920H 5000-4600 was manufactured in 2020. A robust plastic processing machine featuring a clamping force of 5000 kN and an injection unit of 4600. It has a significant opening stroke of 900 mm and mold platens size of 1280 x 1280 mm. Consider the opportunity to buy this Arburg Allrounder 920H 5000-4600 plastic processing machine. Contact us for more information about this machine. Additional equipment Lhsdpsx U Tqrsfx Afaof • The robot + auto line are not included. These PIOVAN accessories are included: Piovan Hot Air Dryer G35 / Piovan Suction Unit PF30 / 3x Piovan Temp Unit THW118-F (+1x brand new unused temperature unit) Machine Benefits Technical Machine Benefits • Pump hours in operation: 1769 hours, hours in automatic cycle: 695 hours • Clamping force: 5000 kn / injection unit: 4600 • Opening stroke: 900 mm / distance between bars: 920 x 920 mm / mould height min-max: 400-1050 mm • Size of mold platens: 1280 x 1280 mm / ejector stroke: 250 mm / ejector force: 86 kn Extra Information The machine has been used very little

Condition: ready for operation (used), Year of construction: 2014, clamping force: 1,000 kN, screw diameter: 35 mm, injection weight: 132 g, overall weight: 3,650 kg, This Arburg Allrounder 420C 1000-290 was manufactured in 2014. It features a clamping force of 1000 kN, an opening stroke of 500 mm, and a platen size of 570x570 mm. Max shot weight is 132 g. Consider the opportunity to buy this Arburg Allrounder 420C 1000-290 hydraulic injection moulding machine. Contact us for more information. • Opening stroke: 500 mm • Platen size: 570 x 570 mm Lodpoyglrwefx Afajhf • Max. volume: 144 cm³

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s Lodpfxeydnigs Afaehf • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A

Year of construction: 2006, condition: ready for operation (used), This Arburg Allrounder 1200T 800-150 was manufactured in 2006. A vertical injection moulding machine, it offers robust functionality for specialized plastic processing tasks. Consider the opportunity to buy this Arburg Allrounder 1200T 800-150 vertical injection moulding machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Clamping force: 800 kn • Distance of the tie bars: 1200 mm / screw diameter: 25 mm / max part weight (g, ps): 45 / core pull: 1 • Configuration: vertical Lhjdpfx Afoyaizpsasf

Condition: used, Year of construction: 2000, operating hours: 144,381 h, functionality: fully functional, clamping force: 2,000 kN, For sale is an injection molding machine of the Arburg brand and type 520 C 2000-675 Technical data Year of construction: 2000 Lhjdpfx Aou Uuakofaof Clamping force: 2000 kN Operating hours: 144,381 Pump motor power: 30 kW On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2001, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 35 mm, clearance between the columns: 850 mm, ejector stroke: 575 mm, plate width: 650 mm, plate height: 650 mm, For sale is an Arburg 470 S 1300-675 injection molding machine. Technical specifications: Year of manufacture: 2001 Pump hours: 90,176 Automatic operation: 76,747 Clamping force: 1300 kN Opening stroke: 575 mm Distance between bars: 850 mm Minimum mold height: 275 mm Clamping platen size: 650 x 650 mm Ejector stroke: 175 mm Ejector force forward/backward: 40 Nm Screw diameter: 35 mm 50 mm replacement cylinder available for an additional charge Geiger Handling MiniLiner 3.0 is included in the offer. Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? Lodpfewivkdsx Afaehf For more information or to contact us, visit our website.

Condition: new, Year of construction: 2023, Clamping force: 320 t Screw diameter: 30 mm Shot weight: 97 g Distance between tie bars V: 720 mm Ljdpfxoyg I Emj Afashf Distance between tie bars H: 720 mm Shot volume: 106 cm3 Type: Multicomponent Drive: Hybrid

Condition: new, Year of construction: 2023, functionality: fully functional, Clamping force: 500 t Screw diameter: 60 mm Shot weight: 620 g Distance between tie bars V: 920 mm Distance between tie bars H: 920 mm Shot volume: 678 cm3 Type: Multicomponent Drive: Hybrid Ledeyg I A Sjpfx Afashf Special multicomponent machine

Year of construction: 2017, condition: like new (used), Production line for manufacturing NESPRESSO coffee capsules Ljdpew Nriuofx Afaohf Comprising the following components: Item 01) Injection molding tools for the capsule, Manufacturer: FOSTAG AG 1 pc. mold with 16 cavities 1 pc. mold with 32 cavities Item 02) Two-component injection molding machine, Manufacturer: ARBURG, Model: 720A3200-800, Year of manufacture: 2017 The capsules are produced as free-falling parts.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 211886, Plastic Injection Moulding Machine | Arburg Allrounder 630 S 2500-170 Ljdpfxjyf Ha He Afaehf Clamping force [kN]: 2,500 Number of components: 3 Clamping platen width [mm]: 900 Clamping platen height [mm]: 900 Clear tie bar spacing horizontal [mm]: 630 Clear tie bar spacing vertical [mm]: 630 Centre ring diameter [mm]: 160 Min. mould height [mm]: 400 Max. mould height [mm]: 700 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 225 Thread [M]: 24 Multi turntable type: Rotary table Rotary table diameter [mm]: 900 Rotary table thread [M]: 20 Max. mould weight [kg]: 2,500 Max. mould weight, moving side [kg]: 2,500 Screw diameter [mm]: EE1:30, EE2:25, EE3:25 Max. shot weight [g] PS: EE1:83, EE2:59, EE3:58 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, robot Inspection possible at any time by appointment. Free loaded on truck (Butzbach). #Tags: ARBURG | Multi 3K | 630S

Condition: like new (used), Year of construction: 2018, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table Lhedjyfg D Sepfx Afaof stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2.000 bar Working hours: 15.571 h

Condition: excellent (used), Year of construction: 2011, operating hours: 34,217 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, total length: 5,940 mm, total width: 2,000 mm, total height: 2,000 mm, overall weight: 8,300 kg, Injection Moulding Machines ARBURG Allrounder 570 H 2000-800 Stock No.: 503669 Manufacturer: ARBURG Model: Allrounder 570 H 2000-800 Control System: Selogica Year of Manufacture: 2011 Operating Hours: 34,217 h For sale is a used ARBURG Allrounder 570 H 2000-800, year 2011. This machine features a screw diameter of 50 mm and a clamping force of 2000 kN. Lhsdpfxeydkyzj Afajf Ideally suited for efficient and precise injection moulding applications in plastics processing. Contact us for further information and a customised offer! Technical Data – Clamping Unit Clamping force: 2000 kN Tie bar spacing (h x v): 570 x 570 mm Platen size (h x v): 795 x 795 mm Min. mould height: 250 mm Max. mould height: 550 mm Max. daylight: 1000 mm Opening stroke: 450 mm Ejector stroke: 200 mm Ejector force: 60 kN Movable platen centring diameter: 125 mm Fixed platen centring diameter: 125 mm Mould weight: 1300 kg Technical Data – Injection Unit Screw diameter: 50 mm Shot volume: 392 cm³ Injection pressure: 2000 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 60 rpm Screw torque: 1000 Nm Free-flow injection rate: 656 g/s PS Number of heating zones: 8 Nozzle stroke: 400 mm Dimensions & Weight Machine dimensions (LxWxH): 5.94m x 2m x 2.21m Total weight: 8300 kg Equipment HMI in German Levelling elements EUROMAP 67 handling interface EUROMAP 73 interface Mould heating 12x

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-M-500-90 Year of manufacture: 1995 Serial number: 164822 Control system: Control unit: Arburg Multronica Injection unit: Injection type: vertical injection unit Screw diameter: Ø 20 mm Clamping unit: Lodsx Eitbspfx Afaehf Clamping force: 500 kN Additional equipment: Pick system: part removal system Divider chute: separating chute / selective chute Enclosure: full protective enclosure