Annealing buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
5
Reserved immediately from stock, error, and sale, available: 1 used, but very well preserved hardness-annealing - TEMPERING furnace Make Nagy, Wuppertal-Ronsdorf, type TMH No. 4089, with the COMMERCIAL mass approx. 320 x 210 x 160 mm high, control range approx. 0-1150 degrees C., 380 v / 50 Hz, adjustable sufenlos with EL. Control box for timer + control, with base 600 x 620 x 830 mm high, Weight ca. 800 x 800 x 640 mm high, weight approx. ges. 200 kg! State real OK! M3kkz Pr... more
6
Heraeus Annealing / Muffel Furnace Max. Temperature 1100 Degree Celsius Effective Inside Size: 200 x 140 x 140mm 2q7wdq 1 Phase 220 Volt 1.8 kW Came from Laboratory and operating at 562 Degree Celsius Sale as it is - Free on Truck Süd Burgenland / Austria more
6
internal diameter 4200 mm max. temperature 970 Grad internal dimension 8600x4200x4220 mm workpiece weight 120 t Temperature range 550-970 °C total power requirement 30 kW Mt0urw weight of the machine ca. 25 t dimensions of the machine ca. 5x8,96,4,5 m more
4

Hereus warm-up / annealing furnace Hereus

Rudolf Diesel Str 23a, 64331 weiterstadt, DEGermany
6569 km
1990
good (used)
Heating surface: 500mm length Width: 300mm Height 300mm Max.Temp. 800 ° -Defekt- Bbsfe8jenf more
3
CXT-II Metal Bright Quenching Furnace is heated in resistance-type which temperature is controlled by PID intelligence. With the 24h timing startup & shutdown. The furnance is used for jewelry, harware, K gold jewelry, copper, silver, wire rods and heating trearment. Under Function of protective air, the workpiece surface is brought with highly bright without oxidized coloration and removed from stresses to satisfay common standards. Configures with the high - performance ammonia decompostion hy... more
7
Nabertherm curing furnace Model S 600 / A Temperature up to 750 degrees C maximum for hardening of metal parts with highest loads Bbownx77fu ready for use and available from stock more
5
used very good condition about 20 years old. Interior VA sheet, width 1100 mm, depth 600 mm, 500mm high Brm0gdcy Outside steel insulated with 100 mm mineral fibre 1500 mm wide, 1450 mm deep with fan motor, 1450 mm high with control cabinet. 2 doors with Cremone. Temperature two point controller 0-200 ° purified and functionally tested. more
6
Batch size ø 700 mm 1300 mm 1 Cabinet ROHDE-electric cabinet with Philips programmer 1 gas station - Degussa 1 oven electrically heated DEGUSSA GSRU 7lczcn8zw 1 cooling station 2 complete retorts with gas key cylinder Cap + Motors / mat. 1 4864 + 1.4841 very good condition - documentation available more
5
Dear buyers, Fxppvbmdo We offer our BBC electric furnace with 63,5KW power supply here. The oven can be heated to 950 degrees. Internal dimensions: 450 x 1000 x 1600 If you have questions just call. With kind regards Thorsten Raab KLB laser welding technology GmbH & Co. KG more
2
Laboratory furnace with nominal temperature of 1,100 C type M110 mass outside width 58cm depth 71cm height 74cm combustion chamber dimensions: width 20cm depth 33cm height 14cm Power: 220V 2,9KW R3qhgrvmp more


annealing
every day

New machines via email!

Be informed!
6
Interior diameter: 610 mm Interior depth: 880 mm Temperature: up to 500 ° C Port: 21 kW Accessories: Condition: good Weight: approx. 2.5 t Degree furnace: 1.400 x 1,300 x 1,200 mm 83n2g8ayf Ground cover: 1,800 x 1,300 x 2,200 mm more
3
Here we offer you a Nabertherm hardening furnace, annealing furnace, muffle furnace. Nabertherm hardening furnace, annealing furnace, muffle furnace Tmax 1200 C Inner dimensions in mm: Width 500mm, depth 750mm, height 250mm volume in liters: 80 liters External dimensions in mm: width 1140mm, depth 1900mm, height 1790mm Power consumption / kW: 20,0kW Electrical connection: 3-phase weight in kg: 820kg type: model N 81 delivery: (See picture) 2 weeks commissioning warranty we supply with Express Sh... more
3

Annealing mesh belt furnace Safed 11Bd40/24

D - Nordrhein-WestfalenGermany dealership location
6418 km
2005
used
max. working temperature: 1100ºC el. heating power: 60 kW treatment type: annealing after deformation throughput max.: 190 kg/h useable band width: 340 mm useable hight: 150 mm cycle time: 5 - 50 min. heating chamber (lx w x h): 2380 x 550 x 512 mm heating and control zones: 3 protective gases: N2 / H2 PLC: Siemens S7 Civ2h9w3 more
6
DEGUSSA Gasnitrier hardness system ignition system Short time nitriding system 2007 complete ueberholterSteuerelektronik. (Protherm 500) Commercial room dimensions ø 700 mm depth 1300 consisting: 1 x Control Panel 1 x gas station completely replaced by 2015 1 x oven 1xKuehlstation 2 x complete retort with gas control cylinder mat. 1 4864 / 1.4841 2 x cover complete with motors Frx20ayn very good condition - complete documentation available more
2
Annealing furnace for brass and copper EBNER Hicon / H2 type. HOg 140/200 Ms DK Diameter of the coils: 1 400 mm Maximum height: 2000 mm Maximum weight of charge 3 000 kg Usage temperature 250 to 700 c. Maximum temperature 800 C. Vlqaugfwk more
1
Annealing furnace Fabr ALLINO type and year not apparent gas heated with modern lightweight insulation Specifications: Maximum temperature up to 1200 C passage mass width x height 1100 x 800 mm usable oven length 2000 mm per 3 gas burners on both sides Dimensions 3100 x 3200 x 3700 mm Transport mass B x D x H 2900 x 3200 x 3000 mm with - door openings front and rear - compl. electr. Establishment in sep standing cabinet - the corresponding fan blower used, from an operational resolution, from lo... more
6

Wire annealing furnace Kohnle T1000-100/50-800

D - Baden-WürttembergGermany dealership location
6619 km
1992
used
The furnace was rebuilt from a furnace into a wire annealing furnace. Heating power 3.5 KW to 1000 ° C L9w3x Ammonia spalter installed 1.8 KW to 950 ° C The furnace is working properly. If necessary, we have a wire unwinding and wire-winding device. more
1
Oven temperature max.: 1000C, heater length: 500mm, cooler length: 1000mm, conveyor belt width: 95mm, conveyor belt speed: 15-500mm/min, with Ammonia fission system Kohnle Wokop GSP 12 FA. Ckg00o2gu more
4

Annealing furnace Heraeus HM12

D - Baden-WürttembergGermany dealership location
6740 km
1977
used
Heating capacity 15 kW / 380V Nominal temperature 1150 ° C Timer 8assc9vfq more
6
2002 Steering completely modernisiert.2005 Heating - masonry completely renewed. Chargengösse L-2000mm 1500mm H-B-1000 - 1200mm / charge weight 8,000kg space heater L-4400 B-2000mm H 4300mm / 2000mm Weight 5.000kg cabinet B-H-2100mm 400mm T-1050 temperature 3x480V 50Hz The system is under power and may at any time be visited by appointment. Vemabnkr more
5
Furnace for production annealed (burned-heated) wire– brand name Lamnea Bruk (Sweden), powered with electrical energy, power 90 kW, vacuum pump (air compressor) brand name Leybold-Heraeus (Germany), electrical cabinet, 2 insertion drums. Capacity – 2 hours for 2 ton of wire(1 insertion drum). Working temperature – 800-850 Celsius. Ry7p2m09q more
1
A tilting furnace of company SOLO, Switzerland. Maximum temperature of 950 C ° 3 * 380 V, 50 Hz. Power 3 KW. Annealing Chamber: (B, H, T) 85 * 40 * 340 mm Lvmsn Dimensions unit: 56 * 80 * 155 cm To the glow under protective gas and douse in water. Both suitable for precious metals, as also for non-precious metals. The furnace was in operation to the end and is technically flawless. The oven has no own splitter. more
3
A tilting furnace of company SOLO, Switzerland. Max temperature 1050 C ° 3 * 380 V, 50 Hz. Power 5 KW. Annealing Chamber: (B, H, T) 160 * 60 * 440 mm Ukrmpjids Dimensions unit: 80 * 90 * 160 cm To the glow under protective gas and douse in water. Both suitable for precious metals, as also for non-precious metals. The furnace was in operation to the end and is technically flawless. The oven has no own splitter. more
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Bbuvq3mms2 Complete Planer Line consisting of the following: -- Stetson-Ross 614-D-1 with double profilers; 1" to 6" thickness x up to 14" width cap.; solid 1-piece cast frame heavily ribbed and stress annealed; feedworks cast integrally into frame where feedchain, sprockets and gears run in oil. With (6) powered 12" dia. feed rolls, (2) pair at infeed and (1) pair at outfeed; infeed rolls knurled and chromed; outfeed rolls sandblasted and chromed; steel f... more
6
Complete curing system new control cabinet and control 2007 Batch size 30 x 30 x 60 1 x hardening furnace / 1 x tempering furnace / 3 x quenching bath oil/water/N2 Max. 1000 ° H-3350mm + extraction = 4350 mm / B-2700mm / L-5000mm 1 x control panel H-2500mm T-600mm L-2400mm 1 x control panel H-2000mm T-600mm L-2000mm Wf0c99rt2 1 x charging place + charging material about 10Chargen The unit is under power and produced unti... more
3
from 1,6 mm up to 0,25 - 0,6 mm speed max. 360 m/min Fine wire drawing machine Make. Lukas   Type. Construction year. 2002 Workspace. infeed max. Ø 1.2 mm Dnhm9qqwu            finished wire.Ø 0.25 - 0.6 mm The plant consists of: - decoiler for wire coils - Continuous wire annealing - wire drawing machine - Vertical wire spooler Complete with control cabinets Power supply 400V, 50Hz there are several machines available more
6

Electric furnace car 1400 ° C ROHDE HWE 2400 SH Semigasdicht

Obermaßfeld- GrimmenthalGermany dealership location
6656 km
2015
good (used)
Condition: very good, checked -Innenabmasse B x H x T: 1550 x 982 x 1525 mm -Volume: 2400 l -incl. 1 stove car covered with SIC plate -Siemens touch panel, Jumo Imago 500 -Electrical supply and exhaust air throttle control -Hydraulic lift door -Controlled ventilation fan -Exhaust hood for connection to the exhaust duct -in a semi protection gas version (according to sealed protective gas supply,) -Total power: 190 kW -Total power: 290 amp -Supply voltage: 3N PE / AC 400V 50 Hz -Maxi... more
6
Hardening furnace of Heraeus MOD: M 110 Laboratory furnace / annealing furnace, muffle furnace up to 1100 ° C Power supply - 230 V... 3 kW Combustion chamber - 140 x 200 x 330 mm deep Dimensions - 580 x 710 x 740 mm in height Weight: 80 kg Rn0gxdpx The b. is based on the serial. -No. taken over, it does not have. more
4

Hardening furnace Artur Nolzen TH40/24/60

PeitingGermany dealership location
6827 km
1990
excellent (used)
We offer a used annealing furnace: Artur Nagy Type: TH40/24/60 BJ. 1990 maximum temperature 1150 ° C Performance 19,5KW Ptmyt3 very good condition more
8

Centerless-grinding machine König & Bauer Multimat 130

Weileräcker 2, 78078 Niedereschach, DEGermany
6645 km
refurbished (used)
Centerless-grinding machine for round grinding König & Bauer Multimat 130 Completely overhauled with new PLC control Automation interface Control an annealer single system Interface for annealer central supply Piece counter, air blow nozzle Servo-rule disc drive Standards for 2-axis Grinding wheel 400 x 130 / 11 KW Control plate 250 x 130 / 1.5 KW Itf8ial more
15
Drawing machine M 355 compact-type design: No. of wires 1 Wire inlet Ø 8,0 mm Wire finish Ø 1,24 - 2,76 mm No. of dies 12 Drawing speed max. 31,5 m/sec Main Motor 310 V, 66 A, 1900 rpm, 403 kW Annealer R 500: Wire Ø 1,0 - 4,6 mm Power connection 350 kVA Nbr3b Annealing current max. 3100 A Dancer T 300 - several spare parts - drawing machine has new main motor from 2012 more
6
working area: 18 -180mm² rated capacity 40 kVA DOUBLE UPSET BUTT WELDING MACHINE with AUTOMATIC FLASH REMOVAL for STEELWIRE and reannealing device with temperature control via infrared pyrometer constr.: STRECKER type: SS 40 NV PYR year: 2002 condition: very good working range: steel wire profiles: 18 - 180 mm² material: steel rated power: 40 kVA primary voltage: 400 V frequency: 50 Hz Bshunfrc working current: 13,2 kA at 15% ED secondary short-circuit current: 16,5 kA seconda... more
6

High-temperature furnace 1750 ° C, electric Nabertherm HT 160/17 HDB

Obermaßfeld- GrimmenthalGermany dealership location
6656 km
2009
excellent (used)
RESERVED *. In DB version with security package for the debinding and sintering in a process. -Tmax 1750 ° C -Indoor B x T x H 500 x 550 x 550mm -Volume 160 litres -Siemens PLC control system with touch panel -Exterior B x T x H 1250 x 1050 x 1900 mm -Double-walled body construction with fan cooling -Heating of both sides on molybdenum Disilicide heating elements -Fibre insulation with special back-up insulation -Page isolation, built out Groove and spring blocks -Swing door with chai... more
2
Artur Nagy hood furnace incl. E-Cabinet Type LHD 60/60/30 maximum temperature 450 ° C BJ. 1992 Connection 3 x 400V Mnw8h Weight 650kg more
6
Hardening furnace brand: "OBEGE" licensing DEGUSSA Year of construction: 1983 Yrqhos furnace chamber: S40 / 25/62 Fabrication number 3546 Maximum temperature 1350 ° C Dimensions of the forge pocket: length: 800mm x width: 400mm x hight: 250mm Power 35 KW Incl. Control and control unit. Was used as an annealing furnace for chisel hardening. Only few operating hours. Is still connected to the mains and ready for operation. Price € 5000, 00 for dismantling and packaging on pallets... more
6

Hardening Furnace

Neu-UlmGermany dealership location
6736 km
2015
used
From annealing furnace made of composite (carbon) production internal dimensions (cm) 470(b)x400(h)x1000(l) floor loading capacity - passable up 5 sunken. Like new condition, hardly operating hours. Modular design, can be shortened. Bbgdefy7j3 Heating system 3x50KW, the circulation is carried out by 3 fans (5KW). There are 12 connectors for Vakumschlaeuche. The heater is equipped with a sprinkler system. Temperature range 40-200 C. New price € 400,000 The furnace is already un... more
6
IDEAL BAS 160 Flash butt welding machine for band saw blades for wood and metal Blade width 25-160 mm 7mezoua20 With thyristor annealing pyrometer water cooling foot pedals year unknown top visual and working condition in stock more IDEAL BAS welders IDEAL AHE shears and SMH Grinders, and Vollmer sharpeners more
2
working area 1 - 6 mm rated capacity 10 kVA quality II 8wlsoos3j Butt Welding Machine with reannealing unit, grinding stone and shears on moveable underframe Manufacturer Schlatter Type EA-2 Power 10kVA Working range max.Ø 6 mm min.Ø 1 mm Injection 500 V, 50 Hz more
5

Chamber furnace 1300 ° C, electric Nabertherm LH280/13DBS

Obermaßfeld- GrimmenthalGermany dealership location
6656 km
2009
good (used)
5 units on sale -with Entbinderungssystem - Tmax 1300 ° C - 280 liters -Internal L x W x H 750 x 750 x 500 mm - Siemens PLC control system with touch panel -Double-walled body construction with rear ventilation Grtzr09 -five sided heating - multi-layered, fibre-free insulation fire light stones (advantage of better chemical resistance) and back-up insulation -Rated voltage 3/N/PE 50 Hz 400V -Performance 44 KW -Total weight approx. 800kg We carry industrial furnaces, we not only consid... more
6
Siemens Annealer to 990 ° C The oven has a clear height of 1, 10 m and a diameter of 95cm. Total height of the furnace 2, 30 m, width 2, 10 m depth 1.70 3bmvrmdjf The thyristors in the control panel are missing. The oven is so not ready for operation. The oven was overtaken in 2007 by the man of steel. Documentation available Weight incl. control cabinet is 2500kg more
4
Conveyor belt furnace for forged parts, make Aichelin revision 2007 PLC: Siemens S7 heating: natural gas band width: 1.300 mm useable height: 200 mm consisting of: push-in device payload: ca. 16 kg cycle time: 12 s dosage: 2.500 kg/h conveyor belt annealing furnace type: DHGR 950 - 130 / 1400 working temperature: 840 - 920°C gross heating capacity: 2.500 kg/h at 920°C belt load capacity: 150 kg/m2 heated length: approx. 14.000 mm connected load heating: 1.050 kW burners number: 18 type WS ... more
6
Here we offer a Nabertherm high temperature tube furnace. Nabertherm high temperature tube furnace This compact tube furnaces with SiC Rod heating as well as integrated switchgear with controller are universally usable for many processes. Kiln to anneal powders under vacuum, alternate between forming gas: RHTC80-710/15 with regulators P330 tube mounted universal high-temperature furnace in horizontal operation SIC-Stabbeheizt Tmax: 1500 ° C Pipe (D/d/l): 80/70 / 1080mm Beh. Length / len... more
13
Type BAS 051 Bau2gxh8v8 ■Ease of operation and rapid weld cycle by pneumatic clamping device ■Good view of clamping area ■Pneumatic upsetting cylinder ■Automatically acting prepressure cylinder ■Easily and rapidly adjustable alignment stops ■Automatic machine cycle for welding/annealing process Capacity at 50 % duty cycle, 7.5 kVA Metal bandsaws (bi-metall, tungsten) mm 6-41 0,236"–1,614" Wood-cutting bandsaws, mm 6-50 0,236"– 1,969" Stainless steel bandsaws, mm 6-50 0,236"–1,181" ... more
5
Laboratory oven, muffle furnace, annealing furnace nominal temperature 1150 C mass outside width 83cm depth 75cm height 73cm combustion chamber dimensions: width 20cm depth 36cm height 18cm Weight 180 KG 400 volts 12,04KW Izpcceuyw more
5

furnace Castle Kilns UK CFKE2737

Obermaßfeld- GrimmenthalGermany dealership location
6656 km
2011
good (used)
Condition: very good, only a few oven trips and only at 400 ° C -Interior B 900 mm x H 1250 mm x L 2850 mm -Temperature 1000 ° C -incl. 1 stove car, L x W 2850 x 900 mm -Multi channel compact controller Bentrup TC S2 (see file) -digital graphic writer of the firm Jumo or Eurotherm possible on request -Power 94 KW -incl. documentation, CE certification Balfiz8dz9 -We have 2 PCs on sale new SIC plate coverage. We carry industrial furnaces, we not only consider and overhaul but also tra... more
6
Haqht7j wire diameter range: 1,0 - 5,0 mm ring diameter range: 80 - 600 mm wire feeding length: max. 10.000 mm output: 12 - 30 rings/min welding capacity: max. 10 kVA *with annealing unit* more
3
BANDSAW FLASH BUTT WELDING MACHINE COMPLETE REFURBISHED IN 2017,INCLUDING THE ELECTRONIC CONTROL UNIT, WITH PNEUMATIC OPERATED DEVICE, PYROMETER CONTROL FOR ANNEALING. Brm0l3ui IT CAN WELD METAL BAND SAWS, WOOD BAND SAWS, STAINLESS STEEL STRIP AND BAND KNIVES. more
6
Hardening / annealing to 1100° Chamber size approx. B-230 mm H-180 mm T-330 mm Gr33gua with ignition box, basket, hardening tongs. more
5
length of the machine 5310 mm width of machine 1660 mm Bagbq8393r height of the machine 1590 mm number of roller 4 prebending 10 mm bending capacity 13 mm top roll 300 mm bottom roll 270 mm side roll 220 mm weight 12300 kg power kW bending lenght 3100 mm admission max. 50 mm ce Standard Conical bending Control unit with 7" Touchscreen Induction hardened rolls Side rolls positioning from electronic synchronize PLC Bottom roll rigid mechanic synchronized Machine body made of low-stress annealed s... more


annealing
every day

New machines via email!

Be informed!

to

to

Change search
ANNEALING
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,49 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close