Used Annealing for sale (89)

Condition: good (used), Year of construction: 2009, functionality: fully functional, operating hours: 14,367 h, stroke length: 445 mm, throat depth: 420 mm, travel distance X-axis: 860 mm, controller model: TASC 6000, working width: 4,420 mm, bending force (max.): 320 t, distance between stands: 3,680 mm, installation height: 615 mm, control type: CNC control, degree of automation: automatic, back gauge adjustment: CNC-controlled, number of axes: 6, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, angle measuring system, documentation/manual, foot remote control, safety light barrier, TruBend Cell 5000 – Robotic Bending Cell 320t Complete Service History - 6-axis backgauge system with control cabinet air conditioning - Sensors for 6-axis backgauge Fpsdpfxoylanks Aalsg - Hydraulic upper tool clamping - CNC crowning - Preparation for ACB - MobileControl - Rear work area lighting - Front work area lighting - Operator comfort package with screen, mouse, and keyboard - BendGuard - BendMaster 150 - Track extension 16,000 mm - NC grip re-orientation station - Double sheet detection - Right-hand side door for safety fence - Vacuum gripper - 3x pneumatic gripper couplings - Robust machine frame in full-steel construction, ram stress-relieved annealed - 4-cylinder upper drive - Block hydraulic system with low-noise double pump - Backgauge with CNC-controlled X and R axes - Hydraulic upper tool clamping - Hydraulic lower tool clamping - Control cabinet cooling via air-to-air heat exchanger - Machine control network connection Control - TRUMPF TASC 6000 Safety - Standard safety equipment

Year of construction: 2012, condition: used, Technical details: max. temperature: 700° - übliche Temperatur: 400 - 650°C Grad size of opening: B: ca. 2200 x T: ca. 3800 x H: ca.1100 mm program control: Siemens S7/300 IM 151-7 interface: Ethernet container volume: Ofen-Volumen: 9,2 m³ l control voltage: 24 / 230 Volt current type: 1P/PEN; 50 Hz Voltage: 400 V elect. connected power requirement of heater: 3 x 3 x 21 kW = 189 kW flow rate: 3 x ca. 9.000 = 27.000 m³/h weight of the machine ca.: 8,0 t dimensions of the machine approx. HxWxD: ca. 3.9 x 3.8x 4.8 m dimensions electric cabinet: ca. B: 2.400 x T: 400 x H: 2.000 mm transport dimensions LxWxH: ca. 5,2 x 3,6 x 2,9 m Fpedpeu R Dhxsfx Aalsg Electrically heated circulation oven Electric annealing furnace whose housing is made of profiled sheet steel and lined with lightweight refractory bricks/ firebricks. Application/processes: mainly annealing of low-alloy and high-alloy wood cylinders (e.g. alloyed gray cast iron) Usual operating weight 5000kg max. 8000kg The parts are placed directly crosswise on the bogie hearth/grate in the flow device. (Height above floor approx. 750mm without grate) Heating integrated in oven ceiling Circulation fan (3 compact fans) on oven side wall, 3 x 4.0 kW = 12.0 kW Forced cooling (1 cooling air fan) Program control via 25 programs with 50 program sections per program Oven door/lifting door with SWE gear motor approx. 2.2 kW (frequency-controlled) Bogie hearth drive approx. 3.0 kW SEW geared motor (frequency-controlled) incl. center rail (chain drag) used, good condition *

Condition: used, TUBE MILL OTO MILLS 219.10 The OTO MILLS 219.10 is a heavy-duty tube mill, characterized by its rigid mechanical construction and its integration of high-tier industrial components, making it a stable continuous, high-quality industrial production line. Technical specifications · Manufacturer: OTO MILLS · Tube diameter: 88.9 - 219 mm · Square: 90x90 - 200x200 mm. · Rectangular: 20x60 - 250x150 mm. · Thickness: 2.5 - 10 mm. · Speed: Max. 80 m/min · Coil weight: Max. 16 Ton · Tube length: 6 - 12 m Scope of supply · Entry line · OTO 219.10 forming and sizing system · Cutoff and runout system · Electrical and electronic parts · Hydraulic system · Tooling · Thermatool HF welder cfi 600 kw Fodoym Dbdopfx Aaljpg · Double seam annealer (500 kw x 2) – Thermatool · Online Eddy current – Foerster · Semi-automatic packaging machine · Tube inside scarfing system – Alpha Metall Tube diameter: 88.9 - 219 mm Square: 90x90 - 200x200 mm. Rectangular: 20x60 - 250x150 mm. Thickness: 2.5 - 10 mm. Coil weight: Max. 16 Ton Tube length: 6 - 12 m Speed: Max. 80 m/min

Year of construction: 2025, condition: new, functionality: fully functional, Equipment: CE marking, Bogie hearth furnace / kiln / oven for heat treatments on steel (normalizing, annealing, tempering, preheating, etc.) made by Pagnotta Termomeccanica srl, Deruta, Italy Model FFEC/TT Maximum temperature: 800°C Usable load dimensions: 1,300 x 1,000 x 1,300 mm (H) CE certification 12-month warranty New machine, built in Italy Fpodpfewd Halex Aaleg The specifications and attached photos are purely indicative. Customized machines are available, specifically for each heat treatment process.

Condition: excellent (used), Sat B2599A Drawer oven 130 °C If very different products or product parts with equally different annealing times are to be treated independently of each other in the smallest possible space, drawer ovens are the smartest ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven Outer dimensions of the furnace width with control cabinet: 2500 mm depth: 1700 mm Height: 2250 mm Usable volume in each drawer width: 1200 mm depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, when stabilized : +/-3°C at 80°C Frame : The basic structure consists of a non-alloyed steel beam structure, on which the external lighting made of non-alloyed steel is painted in RAL 1013 (pearl white). The furnace inner casing is made of aluminized steel sheet. Insulation between the two furnace housings (inner/outer housing) is provided by 120 mm rock wool. Floor: Same as the furnace walls, with 120 mm thick thermal insulation. Height (from factory floor to I. drawer): 800 mm +/100 mm adjustable by the furnace feet. Openings: 3 drawers, height 250 mm, for a usable load of 120 mm height. Maintenance doors : Fsdpfeim Ik Sox Aalopg 2-leaf maintenance door on the back of the oven. Secured by screws. This door allows complete access to the inside of the furnace. Parts handling: The handling of the parts is ensured by 3 drawers (one above the other). Height between each drawer : 250 mm Usable height per drawer : 170 mm, with almost 10 mm reserve. The drawers are smooth and equipped with a locking piece at the bottom of the drawer to reduce heat loss when opening. Each drawer has a useful load capacity of 120 Kg with load distribution over the entire surface. Load peaks up to 240 Kg can be supported. The drawer seals are made of silicone. The locks of each drawer are ensured by electromagnets and controlled by the Siemens system. Timing of the minimum preheating time with a timer per drawer (located in the electrical cabinet). Timing of the maximum preheating time with one timer per drawer (located in the electrical cabinet). One temperature indicator is provided per drawer. These indicators will be located on the front of the furnace, to the left of the drawers. Financing through our bank is also possible. komplett-konzept.leasingo.de More industrial furnaces in other sizes - new and used - you can find in our store! International shipping costs on request!

Condition: good (used), FOBA DP 15 Marking Laser The FOBA DP 15 laser marking system uses a fiber laser with a wavelength of 1064 nm and a lens focusing of f=254 mm (254 mm focal length). This combination enables the "all-round laser" to permanently and sharply mark materials such as metals and plastics. The 1064 nm wavelength is well absorbed by many materials, making it suitable for annealing, color change, or material removal. Application: The fiber laser is a versatile "all-round laser" for marking industrial products. It is ideal for metals and a wide range of plastics. The technology enables permanent, legible, and precise marking. How it works: The laser beam creates a focused spot of light that penetrates the material. Depending on the material and settings, various effects can be achieved, including: Annealing: A color change of the material through heating. Color change: Creating a color contrast on the material. Material ablation: Removing material to create a depression. Details: Device: FOBA DP 15 Laser Marking System Laser Type: Fiber Laser Wavelength: 1064 nm Focus Length (f): 254 mm (equivalent to 10 inches) Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request! Fpjdpfx Aasw U T Eboleg

Condition: new, functionality: fully functional, power: 5 kW (6.80 HP), fuel type: electric, empty load weight: 4,200 kg, Year of construction: 2024, filling bunker with bunker gutter Fodpfeuqynmex Aalspg bunker capacity 10.5m³ S355 / St52-3 vibratory feeder with 10mm Hardox 450 wear plate gutter fully stress relieved annealed 2 x imbalance motors 2,5kW NEW

Year of construction: 2008, condition: ready for operation (used), A heat treatment facility (2-chamber bogie hearth furnace) consisting of two furnaces is available. 1) Chamber furnace Bättenhausen Wärmetechnik GmbH, year of construction: 1991. 2) Chamber furnace LIO Poland, year of construction: 2008. Chamber dimensions X/Y/Z: 2x900mm/4300mm/1100mm, fuel: natural gas, temperature range: 350°C-1100°C, burners: 2x18, max. product dimensions X/Y/Z: 8800mm/3100mm/250mm, max. product weight: 18t. Process: Normalizing, tempering, soft annealing, austenitizing, hardening. Including a chimney, height: 38m. The plant is partly scrapped. Documentation available. On-site inspection is possible. Fsdpfx Aaewmdvvjlepg

Year of construction: 2015, condition: excellent (used), Dip-Tech GlassJet AR6000, Digital Printer for Glass, year 2015 Print resolution: 360 dpi (real) DIP SPECTRUM INK: Ceramic ink for both tempered and fired annealed glass Fjdpsrhkp Ejfx Aalspg Ink colors: Black, white, etch imitation, and various spot colors There are currently 7 print heads in operation: 4 black and 3 white. They enable the printing of black and white. Maximum glass size: 3300 x 6000 mm Minimum glass size: 400 x 400 mm Glass thickness: 2 – 19 mm Operators: 1 Inline functions: Continuous conveyor Overall dimensions: 6071 x 7746 x 1600 mm (width x length x height) Image format: All common graphic formats including: PDF, PS, EPS, Tiff, BMP and JPEG Ambient temperature: 18 – 25 C Installed power: 400 VAC x 16A, 3 Ph. 50/60Hz In very good condition. Dismantled in February 2024. Available: NOW

Condition: used, Year of construction: 2001, functionality: fully functional, Model: BAS 051. Automatic Flash Butt Welding Machine for Band Saw Blades. Pneumatic clamping. Annealing pyrometer. Inserting bar for blade positioning. UniOp automatic annealing temperature control. Machine cleaned and repainted. Year of manufacture: 2001. Nominal primary voltage: 380 [V AC]. Max. welding rating: 8 [kVA]. Clamping force: 20 [kN]. Forging force: 5 [kN]. Welding ranges. Band saw blades for wood: 6-50 [mm]. Bi-metal bandsaw: 6-41 [mm]. Hoop knives: 6-50 [mm]. Stainless steel bandsaw: 6-30 [mm]. Weight: 600 [kg]. Dimensions (W*D*H): 1350*1000*1700 [mm]. Instructions and packing included. Fpsdpfsxcnzrjx Aaleg

Year of construction: 2019, operating hours: 200 h, condition: excellent (used), functionality: fully functional, input current: 28 A, machine/vehicle number: 319009701, EILOG KUV250 annealing oven, temperature 250 degrees, year of production 2019, weight 880 kg. Capacity 1.5 m3. Fedpfoyftbdox Aalspg

Condition: new, - NEW -- With TERSA cutter block for secondsChange planer knives- TERSA planing knife system enables particularlyquiet running- Helical-toothed steel feed roller forconstant and even wood intake- The particularly long planing tables from onePiece allow easy dressing of theWork pieces- Large planing fence can open when openingthe planing tables remain in position- Planing tables that open to the rear- The high machine weight ensures the highestPrecision and smooth running- Powerful industrial engine- Robust steel / cast iron construction- work tables are made of gray cast iron,post-annealed and stress-free, therebyinsensitive and permanently flat- Table lips for quiet runningEquipment detailsTERSA planing knife shaft- No more adjusting and screwing- Blade change in seconds- Self-locking- Particularly quiet- Perfect planing resultSuction hose connection- The suction nozzle of the planer and thicknesspoint in the same direction.- The hose connection is made by just oneSide off.- No hose is needed aroundthe machine passes ve- Stable chain drive- Steel drive wheels- Solid cast iron bearing blockPlaning mill- Prevent massive kickback protectionthe kickback of workpieces- TERSA planing knife shaft with three knivesensures an optimal planing patternThe material feed- Helical steel feed rollers for oneconstant and even material intakewithout prints- Multiple teeth grip at the same time for powerfulFeed- Wear-free in contrast to rubber feedrollingTechnical specifications:Length approx. 1725 mmWidth / depth approx. 880 mmWeight approx. 270 kgDressing chip removal max. 4 mmExtraction nozzle thickness 2 x 120 mmThick working height min. 3 mmThick working height max. 230 mmThickness of the chip removal max. 4 mmDrive motor power 4 kWConnection voltage 400 VMains frequency 50 HzPlaner knife shaft type TERSANumber of planing knives 3 pcsSpeed ??5200 min¯¹Planing width max. 300 mmFeed speed 7 m / minItem No. 5503031Storage location 97447 Gerolzhofen- free loaded- Fpodjvwgaaepfx Aalsg

Condition: new, Year of construction: 2025, Woodworking machinesTable routers Minimax twf55 es Item number: 5502261 Sturdy cast steel construction Anodized aluminum sliding carriage Large dimensioned milling unit made of grey cast iron, swivels up to -45° to the rear Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Height and inclination display accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress relieved and re-annealed for lasting precision Powerful 5.0 kW industrial motor Curved milling hood included in delivery Made in Italy Dimensions and weights Length (product) approx. 1200mm width/depth (product) approx. 2000mm Weight (net) approx. 510kg Connection suction suction connection diameter 2 x 120mm Work table working table length 1200mm working table width 530mm table height 900mm sliding carriage length 1200mm Slide width 360mm Slide height 142mm Installation information Required space length 2800mm Space requirement width/depth 2910mm Explanation of space requirements The dimensions take into account maximum travels or useful lengths. Machine body length 1200mm Machine body width/depth 846mm Working area length 1600mm Working area width/depth 2300mm Explanation of working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Milling spindle spindle inclination 0 to -45 useful length of the spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ Milling spindle speed indicator LED on the front of the machine Fjdpfji Dphtex Aalspg spindle arbor diameter 30mm Milling tool diameter max. Tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 240mm Tool diameter max. tenon milling 320mm EQUIPMENT Equipment Aluminum sliding carriage ✔ Milling fence Heavy-duty professional version with hold-down device, protective cover and aluminum milling fence jaws Telescopic miter fence with two folding stops Cantilever table ✔ Curved milling protective hood ✔ Eccentric clamp ✔ Handle on sliding carriage ✔ Height adjustment of the spindle manually Tilt adjustment of the spindle manual Control manual height and tilt adjustment of the milling unit Position of the control elements on the machine body location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Dimensions and weights Length approx. 2000 mm width/depth approx. 1110 mm Weight approx. 430 kg Dressing table Feed table length 1034 mm chip removal max. 5 mm Connection suction Suction port diameter thickness 2 x 120 mm Fsdpfjhkz E Tsx Aalspg Thickness working height min. 3 mm working height max. 230 mm Chip removal max. 5 mm Electrical data Power drive motor 5 kW Supply voltage 400 V Mains frequency 50 Hz Planing cutterhead Type TERSA Number of planing knives 4 pcs Speed 5200 min¯¹ Max. planing width 410 mm Feed rate speed 6 / 12 m/min TERSA planing knife system enables particularly quiet running. Diagonally toothed steel feed roller for constant and even material feed Material feed with two speeds Numerical display for thicknessing table height The 2,000 mm long dressing tables allow easy dressing of large workpieces. Working tables are made of grey cast iron, annealed and stress relieved, thus insensitive and permanently flat Stable large aluminium dressing fence with round rod guide (1200 x 160 mm) Thicknessing table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth running. Powerful industrial motor Robust steel/cast iron construction Equipment details Dressing fence Stable, large dressing fence made of aluminium (1200 x 160 mm) With precise round bar guide Suction hose connection The suction ports for dressing and thicknessing point in the same direction during dressing and thicknessing. The dressing

Condition: excellent (used), Year of construction: 2010, Bernardo VMS 360 vertical band saw. Top condition as a training machine - hardly used The vertical band saws in the VMS series are suitable for sawing almost all sawable materials (e.g. steel, plastic, non-ferrous materials, colored materials, etc.). They are mainly used in general production, in tool and fixture construction for the manufacture of punching and cutting tools. Cutting width: 355 mm Cutting height: 230 mm Working height: 960 mm Cutting speed 20 - 90 m/min Saw band length: 2840 mm Saw band width: 3 - 16 mm Table size: 500 x 400 mm Motor power: 0.75 kW Blade welding device: 2.4 kVA Machine dimensions (L x D x H) 940 x 560 x 1850 mm Fodpfx Aajvutxdslspg Weight approx. 250 kg Comes standard with band welding device, annealing device, scissors and grinding stone Comes standard with continuously adjustable cutting speed Machine body made of robust steel construction for smooth running Precision blade guide for optimal cutting results Ideal for sawing complicated contours and shapes Blow-out device with compressor included in delivery For radius sawing, saw bands from 3 mm width available Solid cast iron table, the large support surface ensures safe working Location: from stock 54634 Bitburg - available at short notice -

Condition: new, Year of construction: 2025, Surface planer minimax fs 41es TERSA Maximum equipment for the professional. Part number 5503431 Brand Holzkraft / SCM Diagonally toothed steel feed roller for constant and even material feed, resulting in chip removal from as little as 0.2 mm (with min. workpiece thickness of 3 mm) - ideal for economical planing of precious woods Models with TERSA cutterblock for changing planing knives in seconds and particularly quiet running Material feed with two speeds Particularly long dressing tables allow easy and precise dressing of workpieces Work tables made of gray cast iron, annealed and stress-free, thus insensitive and permanently flat Dressing tables opening to the rear simultaneously for short set-up times Planer thickness table adjustment via handwheel with numerical display for planer height Cgiptddi High machine weight for maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction Quality - Made in Italy TECHNICAL DATA Dimensions and weights Fpedpjlht Htsfx Aalog Length (product) approx. 2200mm Weight (net) approx. 450kg width/depth (product) approx. 1160mm Dressing table Total length of tables 2200mm Dressing fence length 1200mm Working height 905mm Dressing fence height 150mm chip removal max. dressing 5mm Connection suction Suction port diameter thickness 1 x 120mm Thickness thickness table length 775mm working height thickness max. 240mm Thickness table width 410mm Chip removal max. thickness 5mm Working height thickness min. 3mm Electrical data Power drive motor 5kW Mains frequency 50Hz Supply voltage 400V Planer cutterhead Planing shaft type TERSA Planing shaft speed 5000min¯¹ Planing shaft diameter 95mm Planing width max. 410mm Number of planing knives 4pcs Feed rate feed speed 6 / 12m/min SCOPE OF DELIVERY Planer jointing fence with round bar guide & auxiliary fence Two feed speeds Tersa planer shaft Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, CASADEI PFS 520 - Surface planer with 520 mm planing width and motorized thicknessing table adjustment Sturdy cast iron construction Large, ribbed planing tables made of grey cast iron, annealed against distortion Smooth running due to high dead weight Four feed speeds Motorized thicknessing table stroke with two speeds and digital display Link pressure shoes in the infeed 4-blade shaft, precision bearing mounted Sharp toothed steel feed roller for particularly even and gentle wood feed Extraction roller with rubber coating Large dressing fence, inclinable 90°- 45° readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa planing cutter Change of planing knives in seconds When starting the machine, the planing knives are automatically clamped by the centrifugal force - self-locking The knife protrusion adjusts automatically without adjustment and screwing The planing table is adjusted by a stable and precisely guided parallelogram system, so that the distance of the table tips to the cutter head remains the same in every adjustment position. Fpedsbxz S Hepfx Aaljg The sturdy aluminium dressing fence is anodised as standard, easily adjustable and offers a large contact surface. The adjustable inclination from 90° to 45° is easy to read from the workstation. Standard with auxiliary fence for safe planing even of narrow workpieces Fig. with optional equipment The connection position of the suction i

Condition: good (used), Trumpf TruMicro 6 kW Laser Source High-performance disk laser with nanosecond pulses. The high-performance nanosecond lasers of the TruMicro Series 7000 are based on disk laser technology and combine short pulses and high pulse energies, even at high frequencies. This allows you to remove layers and contaminants at maximum speed and reduce your cycle times. Further optimize your processes by varying the repetition rate – while maintaining a constant pulse duration. The short-pulse lasers of the TruMicro Series 7000 are the ideal tool for the efficient and economical cleaning of tire molds. Large-area applications with high average power Ablation, cleaning, annealing: The lasers of the TruMicro Series 7000 demonstrate their full potential in large-area applications. With pulse energies of up to 100 mJ, they achieve enormous layer removal rates. A scanner ensures excellent power utilization. Flexible laser light cables transport the light to its intended destination and facilitate laser integration. Manufacturer: Trumpf Type: TruMicro 7050 Laser Source Power: 6 kW Cooling: Water System Input Power: 380–460 VAC, 3-phase Laser Power: 750 W Wavelength: 1030 nm Fpjdpfx Aasxaktleljg Pulse Energy: 80 mJ Pulse Duration: 30 ns Beam Quality: 20 mm Repetition Rate: 5 to 100 kHz Fiber Diameter: 400 µm IP Rating: 54 Dimensions (W x H x D): 1460 mm x 1350 mm x 730 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs available upon request!

Condition: new, Machining center with 4 CNC-controlled axes For machining profiles made of aluminum, PVC, and steel Comparable to Emmegi, Elumatec, Fom, Pertici, etc. Machine frame made of robust welded construction, stress-relieved annealed, with hardened linear guides Protective cabin over the entire machining length Pneumatically operated safety door Milling spindle: 3.8/4.6 kW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with ISO 30 tool holder with minimum quantity lubrication for tools, including fill level monitoring Tool magazine: 5 positions, left side in the machine bed, for accommodating drilling, milling, threading tools, angle head, and disc cutters up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm Automatic positioning via device on the Z axis Workpiece positioning: One pneumatic reference stop on each side (left and right) on the A axis Travel ranges: X axis 3500 mm Y axis 370 mm Z axis 348 mm A axis ±90° Travel speeds: X axis 70 m/min. Y axis 30 m/min. Z axis 30 m/min. A axis 60°/sec Maximum working areas: X axis 3270 mm Y axis 250 mm at 0°, 116 mm at ±90° of the A axis Z axis: 170 mm at 0°, 200 mm at ±90° of the A axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-side processing by swiveling the A axis 90°-0°-90° End machining using disc cutter Operating modes: One profile bar over the entire machining length Two profile bars with split machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screws, and guides, with fill level monitoring Operation: Fjdpfswrcwpjx Aaljpg 18.5” touchscreen Mouse + keyboard Connection data: Electrical: 400V/50Hz (3-Ph+N+PE), 16 A, Delivered without power cable Pneumatics: Pressure 6 - 8 bar Dimensions and weight: Length: 5800 mm Width: 1640 mm Height: 2000 mm Weight: 2000 kg Included: Graphical programming software CM3D/CAD3D Barcode reader Additional network connection including remote maintenance/diagnostics for 1 year

Year of construction: 2000, condition: good (used), Temptec annealing furnace: Fjdpsx Tcmyjfx Aalepg Max workpiece size: approx. 1200 × 1200 × 1200 mm Loaded for transport.

Condition: excellent (used), Year of construction: 2016, Blockmold body, tightly welded, annealed, machined, and pressure- tested, executed according to European Standards and P.E.D. - 97/23/EC heat-resistant steel for steam pressure boilers Maintenance platform with ascent aid and fall protection. Block dimensions: • Height: 4,100 mm • Depth (usable depth): 1,300 mm • Width: 1,040 mm • Block gross volume: 5.5 m³ Cycle times: • 12-16 g/l density - 20-22 blocks/hour • 17-19 g/l density - 18-20 blocks/hour • 20-23 g/l density - 16-18 blocks/hour • 24-28 g/l density - 14-15 blocks/hour • 29-35 g/l density - 12-14 blocks/hour Fsdpfx Aaepwbmbolopg Filling system: • Filling silo volume - 1 x 10 m³ • High-pressure suction blower - 11 kW • Number of filling pistols - 2 pcs. • Filling diameter - 300 mm • Drive - hydraulic Mechanics: • Hydraulic system - 15 kW • Demolding - hydraulic • Door movement - hydraulic Electrical equipment: • Servo inverters: Mitsubishi • Frequency inverters: Mitsubishi • PLC: Siemens Simatic • HMI panels: Siemens Simatic • PC: Axiomtek

Condition: new, Year of construction: 2025, functionality: fully functional, nominal heat output: 930 kW (1,264.45 HP), temperature: 1,000 °C, type of input current: three-phase, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, Car bottom combustion furnace (powered by natural gas or LPG) model ST/BT for heat treatments of ferrous metals such as cast iron or steels at temperatures up to 1000°C, complete with one removable trolley and an automatic control and command panel. Fedpfx Aaew Ifl Tslspg Furnace suitable for quenching, tempering, hardening, annealing, normalizing, stress relieving, preheating, etc. CE certification declaration 12-month warranty Brand new machine, made in Italy Specifications and attached photos are for reference only; custom-built machines tailored to each specific thermal process are available.

Condition: good (used), functionality: fully functional, The Labcycler Gradient has the same technical features as its brother Labcycler Basic has. In addition, the Gradient function is active which can be applied by Thermoblock 48 , Thermoblock 96 , Thermoblock 96 alu , and Thermoblock 384. Temperature gradients from 8 to 24 zones are possible to determine the optimal annealing temperature. The Thermoblock 96 and 384 can be applied for high through put. The Triple Block can be used in the Labcycler Gradient without gradient function. The package Labcycler Gradient with Thermoblock 96 and Triple Block should be an interesting tool for all standard laboratories. Ordering Information The Labcycler Gradient must be ordered in combination with one Thermoblock. Additionally, a second or more Thermoblocks can be ordered because the system has a quick-block-changing system. A Thermoblock can be changed in a few seconds. The Labcycler Gradient works at all global line voltages Fsdpeu Tkbnjfx Aalepg Technical Data Line voltage 85 V to 265 V, 50 to 60 Hz Power consumption Maximum 350 W, standby 25 W Noise Idle 38 dBA, typical 44 dBA, maximum 48 dBA Display TFT illuminated colour display ¼ VGA, 5.7“ diagonal, 320 x 240 pixel, touchscreen Heated Lid Programable: Pressure 0 to 120 N, temperature RT up to 110 °C Keyboard Numeric and virtual keys Languages English, German, Spanish Programs 680 standard programs, or at least 3000 steps, the last 16 program runs can be displayed any time, re-start function, programmed and manual pause Password protection Configurable up to 64 users Administration Administrator rights: Reading & writing Copy function Intersystem-copy-function with Labcycler 48 & 192s, Labcycler Basic, and Labcycler Gradient Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2025, Technical Specifications Model: KMF10 Operated: Spring pressure Power: 10KVA (%50 DC) Welding Capacity: Up to 60mm mild steel strip Input Voltage: 220V (50Hz) Fpodpfsvmyalsx Aaleg Protection Fuse: 220V / 40A Welding Power Level: 5 Annealing Power Level: 5 Power Input Cable: 2,3m Protection Class: IP21 Dimensions (W/L/H): 160cm x 180cm x 79cm Weight: 294Kg

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Equipment and technical specifications: Maximum professional configuration, optionally with Tersa or spiral cutter block Equipped with TERSA cutter block for tool-free, second-fast planer knife changes TERSA planer knife system allows for exceptionally quiet operation Helically serrated steel infeed roller for consistent and uniform material feed Material feed with two speeds, powered by a separate motor Extra-long surfacing tables for easy and precise dressing of workpieces Work tables made from annealed and stress-relieved cast iron, robust and permanently flat Simultaneously rearward-opening surfacing tables for minimal setup times Thickness table adjustment via handwheel with numerical height display High machine weight ensures maximum precision and vibration-free operation Powerful industrial motor Robust steel/cast iron construction Chip removal starting from 0.2 mm (at minimum workpiece thickness of 3 mm) due to helically serrated feed roller (ideal for economical planing of precious hardwood) Quality – Made in Europe Equipment details: Tersa cutter block No adjustments or screwing required Fjdpfx Aasw Rhkqeljpg Blade changes in seconds Self-locking Exceptionally quiet operation Material feed: Helically serrated steel infeed rollers for consistent wood feed without markings Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Permanently mounted extraction hood: With the fixed extraction hood, there is no need to change the extraction hose during retooling This saves valuable working time Simultaneous opening of surfacing tables: Both surfacing tables can be tilted up together, spring-assisted, for fast and convenient conversion to thicknessing mode in seconds Thickness table adjustment: FS 41 elite s with thickness table adjustment by handwheel and integrated indicator The thickness table is guided on four large-dimensioned spindles providing maximum stability in all operating conditions. A special lifting device keeps the table position perfectly stable even without locking. Anti-kickback devices: Massive anti-kickback devices prevent kickback of workpieces The 4-knife cutter block ensures optimal planing results Anodized aluminium surfacing fence: Large size (1200 x 150 mm) Easily adjustable Tiltable from 90° to 45° with scale Supplied with auxiliary fence for safe planing of narrow workpieces Digital version: With electric thickness table height adjustment and digital display Scope of delivery: Jointing/edge fence with round bar guide 2 feed speeds Tersa cutter block Technical Data Overall surfacing table length: 2200 mm Surfacing infeed table length: Surfacing table height: Surfacing working width: 410 mm Surfacing maximum cutting depth: 5 mm Surfacing fence dimensions: 1200 x 150 mm Surfacing fence tilt range: Thickness table dimensions: 775 x 410 mm Min. thicknessing height: 3 mm Max. thicknessing height: 240 mm Min. thicknessing workpiece length: Thicknessing feed speeds: 6 / 12 m/min Cutter block speed: 5000 rpm Cutter block diameter: 95 mm Number of planer knives: 4 pcs. Electric...