Used Amada Ha 400 for sale (212)

Condition: ready for operation (used), Year of construction: 1997, pressure 80.0 t chamfer lenght 2550 mm distance between columns 2130 mm column arm 420 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec stroke 200 mm dayligth 470 mm table width 60.0 mm table height 910 mm Number of working hours ca. 21.576 h total power requirement 9.0 KW weight of the machine ca. 5750 kg range L-W-H 3100 x 2180 x 2540 mm - In inspected condition - Machine video - ?v=k_pjAfjm-Bo Equipment: - CNC electro-hydraulic press brake Gjdpfx Afjxddt Hsiskc - CNC control OPERATEUR for 8 axes X1+X2, Y1+Y2, R1+R2, Z1+Z2 - CNC-controlled backgauge adjustment (X1+X2 axis) - CNC-controlled vertical adjustment of the stop fingers (R1+R2 axis) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2 axis) - CNC controler with new screen - 1x freely movable two-hand control & 1x foot switch - Tool upper wedge crowning - TYPE AMADA - Various insert tools (not complete) - CE marking - Side safety device (swivel doors) - Rear safety device (swivel door) - 2x emergency stop buttons at the front - 2x front support arms - Original operating instructions

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 11600 kg Control Unit Brand AMADA Main Drive Pressing force 1700kN Gkjdpfsxcztbsx Afiec Stroke 200mm This AMADA HFE170-3 press brake was manufactured in 2005. It features a maximum press force of 1700kN and a stroke up to 200mm. Weighing 11600kg, it operates on 400 Volts 50 Hz with a foreseen power of 16.5kW. Contact us for more information about this machine. Application Types Bending

Condition: good (used), AMADA PROMECAM APX 50.20 CNC 7 AXIS PRESS BRAKE MAKE AMADA MODEL PROMCAM APX 50.20 YEAR 1995 CONTROL OPERATEUR 2 CAPACITY 50 TONS BENDING LENGTH 2050.0 mm Gkedpfx Ajuad Nfjfioc OPEN HEIGHT 370.0 mm STROKE LENGTH 100.0 mm THROAT DEPTH 400.0 mm MOTOR POWER 9 KW TBC WEIGHT 6400 KG PLUS 7 AXIS- Y, R1,R2,X1,X2,Z1,Z2 COLOURED GRAPHIC SCREEN FULL SET OF TOOL CLAMPS SICK OPERATOR SAFETY LIGHT GUARDS

Year of construction: 2012, condition: ready for operation (used), An Amada CNC 5-axis profile grinding center including an extraction and filtration unit is available. Travel X/Y/Z: 300mm/250mm/88mm, rapid traverse X/Y: 2000mm/min, rapid traverse Z: 500mm/min, max. workpiece diameter: 80mm, max. workpiece weight: 4kg, chuck diameter: 150mm, positioning resolution: 0.0001mm, positioning accuracy X/Y: +/-0.05µm, repeatability: +/-0.2µm, rotary table: 360°, rotary table resolution: 0.0001°. Grinding wheel dimensions X/Y/Z: 75mm-100mm/4mm-6mm/22.23mm, spindle speed: 20000rpm. Machine dimensions X/Y/Z: approx. 1650mm/2100mm/1750mm, weight: approx. 4000kg, control: Fanuc Series 32i-B. Including Amada Wasino TWCE extraction and filtration unit. Documentation available. An on-site inspection is possible. The machine is located in China. Gkjdpfoxfknaex Afioc

Condition: like new (used), Year of construction: 1997, AMADA MODEL ITS2 103 100 TONS X 3000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 5 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1997 stock no. 01853 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 100 TONS BENDING LENGTH 3000 Gkjdpoh H Duhofx Afioc OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 5 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE MACHINE HEIGHT 2340 MOTOR POWER 9 KW can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: HFE 3i 1003 L | 101075, control type: CNC control, Condition and details, see pictures. The machine is currently being sold without tools. Gkjdpfoxfg U Nex Afisc

Condition: good (used), Year of construction: 2001, machine/vehicle number: 0010713, Offer 25105 Gksdpjwtnw Djfx Afiec Technical data: - Max. working width: 3050 mm - Max. cutting capacity: - for steel sheet: 6.35 mm - for stainless steel: 4 mm - for aluminum: 8 mm - Adjustable cutting angle - Number of hydraulic hold-downs: 14 pcs - Backgauge with AMADA position control: 10 – 1000 mm - Front angle stop + support arm - Stroke rate: 12 – 26 strokes/min - Pneumatic connection - Drive: 400 V / 5.5 kW - Table height: approx. 860 mm - Required space incl. backgauge, without front support arms: approx. W 3800 x H 1950 x D 2300 mm - Weight: approx. 6500 kg - Equipped with: - Electric foot switch - Sheet support - Cutting length adjustment - Cutting line illumination

Condition: good (used), functionality: fully functional, Year of construction: 1999, operating hours: 23,000 h, Used AMADA press brake Type: HFB5025 Number of axes: 8 Gkedpoxb U Hljfx Afisc Backgauge stroke: 650 mm Ram stroke: 200 mm Axes: X1, X2, R1, R2, Z1, Z2, Y1, Y2 CNC: O2000 with 2D graphic and USB reader

Condition: good (used), functionality: fully functional, Year of construction: 2013, Year of production: 2013 CNC Control: AB PAD touchscreen interface Axes Controlled: Y1, Y2, X1, X2, R1, R2, Z1, Z2 Bending Length: 3110 mm Distance Between Uprights: 2705 mm Throat Depth: 420 mm Stroke: 200 mm Open Height: 470 mm Automatic Table Bend Compensation Remote Diagnostics & USB/Internet Updates Interactive Programming: 2D workpiece input, automatic program generation Tool Holders: S-GRIP quick-release system Tooling Compatibility: Amada standard Godow Ngufspfx Afijkc

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length Gedpfxjw Iq Ugo Afijkc - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: used, Year of construction: 1995, Used notching machine from FIM (Amada branded) Type: Goal 204 Capacity: 200 x 200 x 4 mm 90 degree angle Year of manufacture: 1995 Gkodpfx Afswr Aakeioc

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,650 h, Control Unit Brand AMADA Model CNC 3i Main Drive Pressing force 100 tons Bending length 3000 mm Number of axis 8 Additional Equipment Accessories: Includes tool package by arrangement Optional Tools: 2x 830 mm prisms and 2x 830 mm bending beams R5 This 8-axis AMADA HFE 3L 1003 press brake was manufactured in 2017. It features a pressing force of 100 tons and a bending length of 3,000 mm, complemented by an Amada CNC 3i control system. With only 3,650 operating hours, it is in excellent condition, fully functional, and ready for operation. Consider the opportunity to buy this AMADA HFE 3L 1003 press brake. Contact us for more information about this machine. Gjdpfexbii Ijx Afiskc Application Types Bending

Condition: used, Year of construction: 2004, This AMADA Vipros 368 Queen is available for immediate delivery. It is in good condition, except 1 servo valve is broken. More information available on request. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection. Punching force: 294 kN Max. plate thickness: 6.35 mm Max. sheet weight: 100 kg Gksdpfxexbgnno Afisc Punching accuracy: 10.1 mm Strokes per minute: 8 mm Max. ram stroke length: 40 mm Turret speed: 30 rpm X-axis Movement: 2000 mm Y-axis Movement: 1270 mm Table length: 4000 mm Table width: 1500 mm

Condition: excellent (used), Year of construction: 2006, operating hours: 25,030 h, Model QUATTRO 2kw Year 2006 remanufactured by Amada specialist 2021 Traverse Method X Axis Head Traverse Y Axis Head Traverse Axis Traverse Distance 1270 x 1270 x 300mm (Z Axis) Max. Sheet Size (including 1 reposition) 2540 x 1270mm Max. Guaranteed Material Thickness 9mm Mild Steel 9mm Stainless (Oxygen Cut) 4mm Stainless (Clean Cut) 4mm Aluminium (A5052) Max. Material Weight 210Kg Max. Feed Speed 80m/min(X & Y Axis) 60m/min (Z Axis) Positioning Repeatability /- 0.005mm Axis Drive (X, Y & Z) AC Servo Motor Workchute 1270 x 550mm Assist Gas 4 Ports, 6 Selections Auto-Change Electric Power Required (Includes Oscillator) 43KVA 400V /- 10% 50Hz Air Required Machine Only 6.0 Kgf/cm² 250 l/min Machine Length 3123mm Machine Height 2275mm Machine Weight 4.9 tonnes Standard Equipment Anti Scratch Roller System -Z-Axis Sensor NC Autofocus Gsdpfeuk U I Uex Afijkc Oscillator Specification Model Fanuc C - 2000C RF Discharge Excited Fast Axial Flow 2000W CO2:He2:N2=5:40:55 /-2% each vol 1.75 /-0.25 Kgf/cm² (at regulator) 10 l/hour NC Specification Model: Fanuc FS - 160i-L 9" Colour LCD RS232C INTERFACE Air Cooled, Floor Mounted COMPLETE WITH CHILLER EXTRACTOR TRANSFORMER

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, operating hours: 30,629 h, laser power: 4,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 200 mm, product height (max.): 20 mm, Laser cutting machine including paternoster! Machine serviced by manufacturer in 2023! LASER CUTTING MACHINE TECHNICAL DETAILS Laser Laser power: 4,000 W Peak power: 500 W Laser source: FANUC AF 4000 E Principle: c2-laser (AC-HF) Laser wavelength: 10.6 µm Laser stability: +/- 1 % Laser consumption: approx. 10 l/h Travel Range and Cutting Parameters X-axis travel: 3,070 mm Y-axis travel: 1,550 mm Z-axis travel: 200 mm Table load: 850 kg Material thickness (mild steel ST 1203): 20 mm Cutting speed: 0 to 20 m/min X-axis travel speed: 80 m/min Y-axis travel speed: 80 m/min Simultaneous axis: 113 m/min Z-axis travel speed: 60 m/min Control system: GE Fanuc Series 160 I-LW MACHINE DETAILS Operating hours: 30,629 h Dimensions & Weight Gsdpsxc E Dqefx Afiekc Dimensions: 8,000 x 3,400 x 2,400 mm Weight: 16,000 kg EQUIPMENT Documentation/manual Cooling unit Safety light barrier Dry separator Keller L-CUT Transformer RIEDEL PC 315.21-ME LAS PATERNOSTER TECHNICAL DETAILS Maximum sheet weight: 3,000 kg Sheet thickness: 1 to 20 mm Maximum sheet size: 3,000 x 1,500 mm Minimum sheet size: 150 x 150 mm Lifting traverse load capacity: 3,000 kg MACHINE DETAILS Dimensions & Weight Dimensions: approx. 6,400 x 5,000 x 8,000 mm Weight: approx. 8,000 kg EQUIPMENT Loading bay Unloading platform Lifting traverse Pallet changer Vacuum traverse

Condition: excellent (used), Year of construction: 2005, pressing force: 50 t, Hydraulic press brake Fab. AMADA Typ. HFP 50-20 Year 2005 Technical data Make: AMADA Type: HFP 50-20 Year of construction: 2005 Effective length: 2090 mm Capacity: 50 t Passage upright: 1,665 mm Stroke: 200 mm Projection: 400 mm Installation height: 470 mm Motor power: 6 kW Dimensions: approx. L 2.95 x W 1.60 x H 2.45 m Weight: approx. 4.8 t Godpfx Afotzcxpsiokc Equipment - Controlled axles: Y1, Y2, X, R, Z1, Z2 - FIESSLER light barrier at the front - Amada upper tool clamping - CNC control 3D AMNC graphics - Rear safety guard (hinged mesh doors) - Swivel operation - front left - Tools: o Upper tool straight, R 0.8mm, H 117mm, length 2,000 mm o Bottom tool V10/88°, length 2,000 mm All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), Year of construction: 2005, Gebruikte 3 meter Amada CNC kantbank Type: HFP 130 3 Capaciteit: 3100 x 130 ton 8-assig (Y1, Y2, X1, X2, R1, R2, Z1 en Z2) Bouwjaar: 12-2005 Gedswz I Irjpfx Afiokc Automatisch Fiessler Alas lasersysteem Euro-stijl gereedschapsklemming met laswisseladapters

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 3200 mm Measurements depth 6400 mm Measurements height 2500 mm Machine weight 11000 kg Table Table load 1200 kg Tools Number of index 30 This AMADA MEISTER G3 was manufactured in 2013. A robust surface grinding machine, it's ideal for precision metalworking. Consider the opportunity to buy this AMADA MEISTER G3 surface grinding machine. Contact us for more information. Gsdoxaqk Rjpfx Afijkc Application Types Grinding

Condition: used, Year of construction: 2012, Opportunity to buy a AMADA press brake with 4300 mm bending length and 170T bending force. Viewing under power possible upon appointment. More information available on request. Gedpfx Aoxbghnjfiokc Pressing force: 1700 kN Table length: 4300 mm Max bending length: 4300 mm Distance between uprights: 3760 mm Throat depth: 435 mm Length of stroke: 200 mm Open height: 470 mm Overall length: 6105 mm Overal width: 3130 mm Overall Height: 3135 mm Machine weight: 15000 kg

Condition: new, Year of construction: 2015, 2-spindle 2-turret machine, max. spindle speed 6000 RPM, with feeder (vibrational bowl), robot handling unit and post-process measurement unit. Control system Fanuc. Dimensions 2400 x 1650 x 1790 mm ( main unit ). SALE IN EU / SWITZERLAND / UK ONLY. Gkjdpelgy U Eofx Afioc

Condition: excellent (used), Year of construction: 2010, laser power: 4,000 W, power: 4 kW (5.44 HP), Used Amada laser cutter type LC 3015 F1 NT 4 kw Gksdpjwrnl Ssfx Afiec year 2010 1500x3000MM fully functional 61,000 operating hours last service December 2024 incl. loading system buyer dismantle

Condition: used, sheet width 2040 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm Gksdpfxjxacgwe Afisc 9.0 St. back stop - adjustable 100 mm/sek cutting angle 1° 20 table height 855 mm table depth 500 mm no. of strokes 33 - 55 Hub/min 0 max. 250 bar engine output 5.5 kW weight of the machine ca. 3300 kg. range L-W-H 2550 x 2100 x 1700 mm From a maintenance workshop Good / well-maintained condition (!!) Equipment: - Powerful electro-hydraulic guillotine shear - AMADA NC control unit * Pivoting control panel, front left - NC electro-motorized material backgauge * Backlash-free ball screw - Manual cutting gap adjustment with 2 levers - 1x long side stop - 1x support arm - Rigid welded machine body - Sighting device with three mirrors (cutting according to marking) - Front safety guard (finger protection) - Rear sheet chute - 1 freely movable foot switch - Operating instructions (PDF)

Year of construction: 2016, condition: ready for operation (used), General Data Measurements width 6212 mm Measurements depth 5436 mm Measurements height 2342 mm Gjdpfx Afoxaqmrsijkc Machine weight 21500 kg Main Drive Number of axis 4 Movement X-Axis Movement 3050 mm Y-Axis Movement 1525 mm Z-Axis Movement 37 mm Turret Number of turrets 1 Additional Equipment Air-blow oil-mist lubrication Slug-vacuum system Digital tool ID / barcode system Integrated tapping: inch/metric taps (M2.5–M8) Marking & deburring tools: on-board marking and deburring options This 4-axis AMADA EMZ3612M2 was manufactured in 2016, featuring a high-speed servo-electric turret punch press with twin AC servo direct drive. It boasts a 33-ton press capacity and an AMNC-F / AMNC-4ie CNC system for enhanced control. The machine handles sheet formats up to 3050x1525 mm and includes a "King" turret with up to 58 stations. Energy efficiency is optimized with AC servo drives. If you are looking to get high-quality punching capabilities consider the AMADA EMZ3612M2 machine we have for sale. Contact us for more information. Application Types Punching

Condition: used, Year of construction: 2001, pressure 50.0 t chamfer lenght 2090 mm distance between columns 1665 mm column arm 400 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 92.0 mm/sec stroke 200 mm table height 910 mm dayligth 470 mm Number of working hours 36.160 h total power requirement 6.0 KW weight of the machine ca. 4850 kg range L-W-H 3458 x 2450 x 2450 mm with only approximately 36.160 operating hours (!!) - Inspected condition - Machine video - ?v=x8Z0h2_wA6s Equipment: - CNC electro-hydraulic press brake - CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) * CNC-controlled backgauge adjustment (X-axis) * CNC-controlled vertical adjustment of the stop fingers (R1+R2) * CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) Gjdpfx Afjxabutoiekc * Hand control unit for manual axes movement * Pivoting control, front left - AMADA/PROMECAM quick clamping system for the upper tool * 1 split set of offset upper tools (UKB 10.512) - AMADA/PROMECAM bottom tool holder * 1x split set of 1-V dies (UKB 20.810) - Side guards (hinged doors) - Rear guards (hinged door) - CE marking - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 1996, pressure 80.0 t chamfer lenght 2550 mm distance between columns 2130 mm Gksdpfxsxabnys Afioc column arm 420 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec stroke 200 mm dayligth 470 mm table width 60.0 mm table height 910 mm Number of working hours ca. 37.102 h total power requirement 9.0 KW weight of the machine ca. 5750 kg range L-W-H 3100 x 2180 x 2540 mm good / well-maintained condition (!!) - Inspected condition - Machine video - ?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2 - CNC-controlled backgauge adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R-axes) - CNC-controlled left-right adjustment of the stop fingers (Z-axes) - Freely movable two-hand control & foot switch - Tool crowning - AMADA type - Various tools - CE marking - Side guards (hinged doors) - Rear guards (hinged door) - 2x emergency stop buttons at the front - Operating instructions