Punching and bending machine

Amada EUROPE 258

Condition: ready for operation (used), Year of construction: 2000, operating hours: 34,744 h, functionality: fully functional, machine/vehicle number: 258 032, overall weight: 11,500 kg, punching force: 20 t, positioning accuracy: 0.07 mm, tool diameter: 89 mm, TECHNICAL DETAILS Machine capacity: 196 kN (20 t) Air pressure: 5 bar Air consumption: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travel Ranges Machine travel range without repositioning: 1,250 mm x 2,000 mm Machine travel range with 1 repositioning: 1,250 mm x 4,000 mm Machine travel range with 1 repositioning and 1 turning: Turning not possible Processing Max. sheet thickness with ball table: 6 mm Max. sheet thickness with brush table: 3 mm Max. table load: 100 kg Precision Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Control and Axes Pneumatic clamping devices: 2 Number of simultaneously controlled axes: 3 (X, Y, C) Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling work cycle, feed 1 mm: X920 / Y920 Tooling Minimum programmable increment: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Itedpeyn Nybsfx Abxog Amadex stations: 2 x 11 1/4" + 1 x 2" MACHINE DETAILS Connected load: 30 kVA Operating hours: 53,497 h Cutting hours: 37,808 h Dimensions & Weight Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Iedpfsxmfc Ujx Abxstg Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2011, operating hours: 27,693 h, laser power: 3,000 W, Equipment: cooling unit, Automatic Rear Loading 6500 - Unloading 6500 - Round tube min 16 mm max 225 mm - Square tube max 160x160 mm - Rectangular tube max 200x100mm Itodsr Iz Slspfx Abxsg

Condition: good (used), Year of construction: 2012, Amada LC 2012 C1 NT / Punch - Laser Machine, Itodpfxsyay Tpe Abxeg Year of manufacture: 2012, Control: AMNG - Fanuc Series, Punching force: 200 kN, Punching area: 2,500 x 1,270 mm, Laser power: 2,500 W, Laser cutting area: 2,000 x 1,270 mm, Z-axis travel: 100 mm, Max. table load: 150 kg, Turret stations: 46 positions,

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Training school display unit VERY VERY seldom use Iodeyunphspfx Abxotg For demo only, like new 1) Amada TP45FX 2) PATEC 110ton press with recoiler

Condition: excellent (used), Year of construction: 2012, operating hours: 15,700 h, functionality: fully functional, punching force: 16 t, total height: 2,155 mm, total width: 4,130 mm, total length: 5,840 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, working range: 1,250 mm, type of input current: three-phase, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,250 mm, workpiece weight (max.): 150 kg, overall weight: 8,000 kg, space requirement width: 4,130 mm, space requirement length: 5,840 mm, feed length X-axis: 1,250 mm, feed length Y-axis: 1,250 mm, Equipment: safety light barrier, For sale: 1x TruPunch 1000 Compact Edition (1250 mm x 1250 mm) - Only 15,700 operating hours! - Brush table Iodpfey Iv I Tox Abxjtg - Year of manufacture: 2012 - 10 tool stations, 2 clamps - Control system based on Bosch CML45 with 15" TFT color display - Dual-beam light barriers The machine was purchased directly from Trumpf in 2015. It was originally a 2012 demonstration machine, previously used in Trumpf’s training workshop (very low hours there). Subsequently, it was operated in our facility in single-shift production for manufacturing welding equipment enclosures, which accounts for the low total of only 15,700 operating hours. It has been used exclusively for light sheet metal, primarily mild steel sheets of 1.25 mm and 2.0 mm thickness, and occasionally 3 mm. No heavier materials processed. No known defects; the machine is still in use and will be available from May 2026. Reason for sale: discontinuation of production. The “Compact Edition” of the TP1000 is optimized for part sizes up to 1250x1250 mm. Larger formats are possible using the “repositioning” function, which requires additional tables. The standout advantage of the “Compact” design is its minimal footprint of just 4.13 x 5.84 m. The machine is equipped with almost every available option: - MultiShear function - Thread forming function - Marking/Fast Beading function - Deburring and rolling technology - Part chute sensor Asking price for the machine: €42,000 plus VAT. Excludes accessories, price ex-works, loading and transport at buyer’s cost. Machine available from May 2026. Optional programming and accessories: - Fully configured workstation (PC) with installed software. Only needs to be connected to the network and is immediately ready for use (saves significant time & money). “TruTops Punch” accessible via network - 10 RTC cassettes - 2 MultiTools with 5 tools each (ideal for this machine!) - Various tools (including 2 x louver tools, round, rectangular, and slitting tools) - Tool adjustment aid Asking price for accessories: €3,000 plus VAT.