Used Amada Apx 103 for sale (221)

Condition: used, Year of construction: 1990, pressure:80 t Bedpfx Anecxxvgomewr chamfer lenght:2505 mm distance between columns:2200 mm total power requirement:7,3 kvA weight of the machine ca.:5,6 t dimensions of the machine ca.:3 x 2,25 x 2,20 m

Condition: good (used), Year of construction: 2008, Used 6-meter CNC press brake by Amada Bwjdpfx Ajy T Hltenmsr Type: HFE 400 6 L Capacity: 6100 x 400 tons Stroke: 350 mm Y1, Y2, X1, X2, R1, R2, Z1, and Z2 CNC controlled 9204 operating hours Weight: 36 tons Transport in 2 parts (main frame + separate lower table) Self-adjusting crowning system in the lower table 450 mm mounted on the floor foundation Dismantling and loading included

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 200 V, type of input current: three-phase, pressing force: 60 t, table width: 900 mm, table length: 550 mm, overall weight: 6,150 kg, year of last overhaul: 2021, compressed air connection: 5 bar, ram adjustment: 90 mm, warranty duration: 5 months, Equipment: documentation/manual, Amada TP 60C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 pressing force 60t two-handed operation Bodpfx Aju Haqhjnmjwr central fattening stroke length: 90mm number of strokes: 65-100/min table-bear distance: 275mm stroke adjustability: 80mm table size: 900x550mm bear size: 500x400mm total response time: 175ms voltage: 200v 50Hz 5.5kw machine weight: 6350 kg

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, input voltage: 200 V, pressing force: 80 t, stroke length: 100 mm, table width: 1,000 mm, table length: 600 mm, overall weight: 8,160 kg, year of last overhaul: 2021, Amada TP 80C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 pressing force 80t Bwedpeu E U Nijfx Anmjr stroke length: 100mm number of strokes: 60-100/min table-bear distance: 310mm stroke adjustability: 80mm table size: 1000x600mm bear size: 590x450mm sudden stop time: 195 ms maximum downtime 215ms machine weight: 8160 kg

Condition: excellent (used), functionality: fully functional, actuation type: mechanical, coil inner diameter: 200 mm, coil outer diameter: 800 mm, coil weight: 100 kg, coil width: 220 mm, for sale AMADA ORII manual sheet metal winder cable winder Bwodpexvitvofx Anmjr manufacturer/type AMADA ORII ST 02 Z coil width: max 220mm coil inner diameter 200-500 mm coil outer diameter: 1100mm coil weight max 100kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 417 h, Amada HFE M2 5012 press brake (2021) Manufacturer: Amada Type: HFE M2 5012 press brake Condition: used, in production and operational Year of manufacture: 10/2020 Operating hours: 6830 hours Working hours: 417 hours (still in use) Pressing force (kN): 500 Press beam length (mm): 1270 Bodpfx Aoy Twk Henmowr Distance between machine uprights (mm): 1035 Stroke (mm): 150 Opening width without punch holder (mm): 480 Overhang (mm): 100 Working height (mm): 920 Working speed (mm/sec): 15 Approach speed (mm/sec): 185 Opening speed (mm/sec): 185 Dimensions: Length (mm): 2585 Width (mm): 2190 Height (mm): 2420 Weight (kg): 3600 Video available.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 4,937 h, pressing force: 102 t, overall weight: 7,200 kg, number of axes: 8, This 8s AMADA HRB 1003 press brake was manufactured in 2023. It features a press force of 1000 kN and a stroke of 250 mm, making it suitable for various applications. With a weight of 7200 kg and a control system of AMNC3i with Lite Mode, it offers advanced capabilities. Consider the opportunity to buy this AMADA HRB 1003 press brake. Contact us for further details. • Stroke: 250 mm • Voltage: 400 / 415 V • Frequency: 50 Hz • Phases: 3 • Installed power: 18.6 kW • Full load current: 29.8 A • Noise level: 72 dB(A) • Press beam length: 3110 mm • Opening width: 520 mm • Axes: 7 programmable • Control: AMNC3i with Lite Mode • Configuration: Without crowning Bwjdsyk Dc Njpfx Anmor • Tool clamping: S-GRIP DUOTools available:3 Amada punches no. 831206, 835 mm long, and 1 split version 3 Amada punches no. 820806, 835 mm long, and 1 split version Plus dies: 3 pieces V 16 / H 120 / 85° x 835 mm long and 1 piece split design 2 pieces V 16 / H 120 / 88° x 835 mm long 3 pieces V 32 / 85° x 835 mm long and 1 piece split design 3 pieces V 8 / V 12 / 88° x 835 mm long and 1 piece split design 3 pieces V 16 / V 25 / 88° x 835 mm long and 1 piece split design 3 pieces V 8 / V 12 / 30° x 835 mm long and 1 piece split design

Condition: good (used), functionality: fully functional, input frequency: 50 Hz, type of input current: three-phase, pressing force: 130 t, Equipment: CE marking, FOR SALE: Amada HFE 130-3 L CNC Hydraulic Press Brake Amada HFE 130-3 L – Heavy-Duty CNC Press Brake, 130 Tonnes We are offering a used Amada HFE 130-3 L CNC hydraulic press brake in [good / fully operational] condition. A well-built machine from Amada Europe, ideal for demanding sheet metal bending applications. Key Specifications ParameterValuePressing force1,300 kN (approx. 130 tonnes) Maximum stroke 350 mm Bwsdoy Hf Tvepfx Anmjr Machine Details Year of manufacture: 2001 Condition: Good ! Tooling included Why Buy This Machine? The Amada HFE 130-3 L is a robust and precise hydraulic press brake built for high-volume industrial production. With 130 tonnes of pressing force and a generous stroke of 350 mm, this machine handles a wide variety of demanding bending tasks with excellent repeatability. Amada's renowned build quality ensures long service life and low maintenance requirements.

Condition: used, Year of construction: 1997, cutting diameter / mm Bwodpfx Anoy S D Rqjmor saw band length 8800 mm cutting width / mm total power requirement / kW weight of the machine ca. / t required space / m

Condition: used, Year of construction: 1978, cutting diameter / mm saw band length 8800 mm Bsdpfx Ansy S Drbomowr cutting width / mm total power requirement / kW weight of the machine ca. / t required space / m

Year of construction: 2005, operating hours: 14,300 h, condition: ready for operation (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, controller manufacturer: AMADA, controller model: AMNC-F (FANUC 180i-PB), overall weight: 18,000 kg, total height: 2,318 mm, punching force: 20 t, product length (max.): 5,526 mm, sheet thickness (max.): 3 mm, table width: 5,120 mm, number of axes: 5, This 5-axis AMADA EM 2510NT turret punch press was manufactured in 2005. It features a punching force of 200 kN, a turret capacity of 45 stations, and a maximum sheet size of 1270 × 5000 mm. The machine has a rapid traverse speed of 100 m/min on the X-axis and 80 m/min on the Y-axis. If you are looking to get high-quality punching capabilities, consider the AMADA EM 2510NT machine we have for sale. Contact us for further details. • X-axis rapid traverse: 100 m/min • Y-axis rapid traverse: 80 m/min • Maximum sheet size: 1270 × 5000 mm • Maximum material thickness: 3.2 mm mild steel • Maximum sheet weight: 50 kg (feed speed F1) / 150 kg (feed speed F4) • Positioning accuracy: ±0.07 mm • Turret capacity: 45 stations • Turret rotation speed: 30 rpm Bwodsy S A Tkspfx Anmsr • Punching force: 200 kN • Hits per minute – 1 mm pitch (5 mm stroke): 780 hits/min • Hits per minute – 25.4 mm pitch, X-axis: 500 hits/min • Hits per minute – 25.4 mm pitch, Y-axis: 330 hits/min • Maximum stroke length: 37 mm • Connected load: 27 kVA • Air consumption – machine: 250 l/min • Air consumption – Air Jet vacuum: 250 l/min • Operating air pressure: 5 bar • Tooling visible in the photos • 4 tool cabinets • Technical documentation (manual scan) • Machine + included tooling package shown in the photos • Machine fully operational: Yes (replacement of one pneumatic hose required to eliminate a minor air leak) • Machine connected to power: Yes

Condition: excellent (used), Year of construction: 2008, Technical specifications: Working length: 2550 mm Frame width: 2050 mm Pressing force: 80 tons CNC control: OPERATOR II Graphic 14” TFT color monitor Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Automatic crowning Stroke: 350 mm Overhang: 420 mm Working height: 960 mm Motor power: 9 kW CE marking Dimensions (length x width x height): approx. 3400 x 2050 x 2550 mm Weight: approx. 6 tons Accessories: 1 set of tools: 1 upper tool punch: 120 mm 1 segmented die: V50, V35, V22, V16 Condition: Bjdpfxsy D T Rwj Anmowr Very good condition, little used, only approx. 5,350 operating hours The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Year of construction: 2008, condition: ready for operation (used), X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible. Bodpjza E S Defx Anmowr

Condition: good (used), Year of construction: 2006, functionality: fully functional, working width: 3,000 mm, control type: CNC control, degree of automation: automatic, number of axes: 7, actuation type: electric, Amada brand press brake Press force 220 tons Bending length 3100 mm Bending length between uprights 2700 mm Approach speed 100 mm/s Bwsdpfew Ha H Djx Anmer Bending speed 10 mm/s Return speed 100 mm/s Opening 470 mm Year 2006 7 axes: Y1, Y2, X, R, Z1, Z2, deflection compensation Amada CNC

Condition: good (used), pressing force: 100 t, total width: 3,000 mm, Manufacturer: AMADA Type: HFE 100-3L + ASTRO 50Y Control: Operator Year of manufacture: 2007 Bwedjvwcduopfx Anmer Long stroke CNC Press brake 8 Axis controlled ASTRO 50Y AMADA Robot ASTRO 50 Y bending cell is composed of an HFE Pressbrake associated with an 7-axis robot. When machining medium / fine thick and large dimension parts. Machine turns out to be highly polyvalent thanks to a 4-m long linearaxis and numerous grippers. Programming has become particularly easy through EASY CAM software Safety CE Fence around machine and tobot Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) Length 8000mm Width 4000mm Please note: The information on this page is correct to the best of our knowledge and belief, and where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: used, Year of construction: 1990, pressure 25 t chamfer lenght 1250 mm distance between columns 970 mm Stroke beam 100 mm max. opening beam/table 270 mm C-recess 150 mm max travel X-axes 420 mm R1 and R2 axis controlled by cnc 100 mm Z1+Z2 axes controlled by cnc manuell mm Quick speed,inspeed 100 mm/sec bendingspeed 10 mm/sec opening speed 100 mm/sec length 1500 mm Bodey Ruw Eopfx Anmewr width 1000 mm height 2000 mm weight 1200 kg total power requirement 4 kW dimensions of the machine ca. 1,5x1,0x2 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, pressing force: 80 t, control type: CNC control, Equipment: safety light barrier, 1 Used Very Clean Amada 8025 cnc down stroke hydraulic pressbrake for sale The Amada HFT 8025 is a CNC hydraulic down-stroking press brake designed for precise sheet metal bending with an 80-ton pressing capacity. It is often equipped with the CD 2000 CNC control system, providing 4-axis control (typically Y1, Y2, X, and R) for high accuracy in industrial applications. Bodpeyzy D Esfx Anmjwr Key Technical Specifications Year 2010 Feature Standard HFT 8025 Press Force 80 Tons (800 kN) Bending Length 2,500 mm Stroke Length 200 mm Open Height 470 mm Throat Depth 420 mm Motor Power 7.5 kW

Condition: good (used), Year of construction: 1990, pressing force: 50 t, throat depth: 420 mm, total length: 2,100 mm, total width: 1,400 mm, total height: 1,900 mm, overall weight: 3,450 kg, distance between stands: 1,530 mm, Bending length 2050 mm, capacity 50 to, gap between column 1550 mm, stroke 200 mm, throat gap 300 mm, motor 5 KW, back gauge motorized, dimension 2100x1400x1900 mm, weigth ca. 3450 kgs Bedpfxov Axpwj Anmswr

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 4,000 rpm, travel distance X-axis: 245 mm, travel distance Z-axis: 210 mm, spindle motor power: 7,500 W, number of axes: 6, This 6-axis AMADA Wasino JJ3 was manufactured in 2007. It features a twin spindle, twin turret turning cell with a maximum spindle speed of 4000 rpm and a chuck size of 8”. The machine is designed for high-volume production with automatic loading and unloading capabilities. If you are looking to get high-quality turning capabilities, consider the AMADA Wasino JJ3 horizontal turning machine we have for sale. Contact us for further details. • Axes: X1, Z1, C1, X2, Z2, C2 • Travels: X1/X2 245 mm; Z1/Z2 210 mm • Spindles: 2 (double front spindle), max speed 4000 rpm, power 7.5 kW (option 11 kW), high-acceleration spindle • Turrets: 2 × 12 stations • Chuck size: 8" (3-jaw, both spindles) • Bed: High rigidity monoblock design • Cutting performance: • Turning (S45C): depth of cut 1.6 mm; feed 0.22 mm/rev; cutting speed 160 m/min • Drilling: Ø22 mm; feed 0.56 mm/rev • Tapping: M16 • Grooving: up to 8 mm • Precision: positioning accuracy ±2 µm; repeatability ±2 µm • Coolant/system: 290 L tank; filtration; high-pressure coolant pump • Cell concept/capability: automatic loading/unloading; fully automated; designed for unmanned, high-volume production • Driven tools: Yes, for both spindles • Condition: Good, properly working; regular maintenance since 2008 Bwsdpfx Ansy Ndu Dsmer Additional equipment • Gantry loader with reverse turn unit • Work stocker: 2 units (expandable to 4) • Chip conveyor • Transformer • Integrated measuring unit (optional concept) • Cleaning unit (optional concept) Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, sheet thickness (max.): 10 mm, total length: 4,600 mm, total width: 2,520 mm, total height: 1,850 mm, Equipment: angle stop, foot remote control, Sheet metal shear Amada GH1040 Z New blade set Fully functional Bsdpfx Aex Igndenmewr Hydraulic cylinders were overhauled approximately 6 months ago.

Condition: new, Year of construction: 2015, 2-spindle 2-turret machine, max. spindle speed 6000 RPM, with feeder (vibrational bowl), robot handling unit and post-process measurement unit. Control system Fanuc. Dimensions 2400 x 1650 x 1790 mm ( main unit ). Bsdpfx Aslgy U Esnmswr SALE IN EU / SWITZERLAND / UK ONLY.

Condition: used, Year of construction: 2004, operating hours: 26,000 h, functionality: fully functional, 2004 AMADA EM2510NT. The perforating machine is in good condition and has always been serviced on time by Amada service representatives. All documentation, service reports are included. Recently replaced bugno encoder. The machine is sold with software and tools. Perforating machine connected, available for testing, inspection. Specification: Year: 2004.07 Made in France. Bedpot Hg Acsfx Anmswr Operating time in hours: 26 426 Hours of power: 65 006 Software: Control unit: AMADA AMNC-F Perforating force: 20 tonnes Stations: 45 Tools: sold with tools Metal length: 2500 mm. Metal width: 1270 mm. Sheet thickness: 3,2 mm. Metal width change: 5000 mm. Workpiece weight: 150 kg. Dimensions: P 6080 x P 5120 x A2318 mm Weight: 16 500 kg Location. Available for testing: Yes If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, input frequency: 5,060 Hz, type of input current: DC, cutting height (max.): 4,115 mm, cutting width (max.): 41 mm, control type: CNC control, overall weight: 1,800 kg, year of last overhaul: 2026, Equipment: documentation/manual, AMADA PCSAW 330 – Automatic CNC Band Saw for Metal Cutting Industrial Automatic Band Saw | CNC Metal Cutting Machine | AMADA Japan For sale: AMADA PCSAW 330 automatic CNC band saw for metal cutting, designed for high-precision and high-volume industrial production. The AMADA PCSAW 330 is a reliable fully automatic horizontal band saw ideal for cutting steel bars, tubes, profiles, and solid materials. Equipped with CNC control, automatic material feeding, Pulse Cut technology, and variable blade speed control, the machine delivers accurate, repeatable cuts with excellent productivity. Manufactured in Japan by AMADA Cutting Co., Ltd., this model is widely used in metal fabrication shops, steel service centers, engineering companies, and industrial production facilities. Key Features & Benefits: ✔ fully automatic CNC band saw for metal ✔ ideal for steel, tubes, profiles, and solid materials ✔ AMADA industrial quality and reliability ✔ CNC touchscreen control system ✔ Pulse Cut technology reducing blade vibration ✔ variable blade speed control (15–120 m/min) ✔ hydraulic operation and automatic feeding system ✔ high cutting accuracy and repeatability ✔ chip conveyor and coolant system ✔ suitable for continuous and serial production Technical Specifications: Manufacturer: AMADA Model: PCSAW 330 Year: 2007 Type: automatic CNC band saw Power supply: 400 V / 3 phase / 50–60 Hz Blade motor: 3.7 kW Hydraulic motor: 1.5 kW Coolant pump: 0.18 kW Pulse Cut motor: 0.2 kW Blade dimensions: 4115 × 41 × 0.9 mm Bedey T Ifuopfx Anmjwr Blade speed: 15–120 m/min Power requirement: 13 kVA Machine weight: approx. 1800 kg Equipment: automatic material feed system hydraulic front and rear vises touchscreen CNC control automatic cutting cycles chip conveyor coolant and lubrication system rapid approach system manual and automatic operating modes Condition: Used machine in very good working condition, fully operational and ready for production. 📩 Contact us for price, additional photos, technical details, or machine inspection.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, type of input current: three-phase, overall weight: 2,200 kg, coolant pump power: 180 W, saw band length: 4,570 mm, saw band width: 41 mm, AMADA HFA 400 – Automatic Band Saw for Metal Cutting Serial production | AMADA reliability | Industrial use The AMADA HFA 400 is an automatic horizontal band saw for metal, designed for accurate, repeatable cutting in serial production environments. This model combines a compact footprint with a rigid structure and proven AMADA Machine Tools technology. Bwodoyc H Ewspfx Anmjr With a solid machine weight of 2200 kg and fully automatic cutting cycles, the HFA 400 is ideal for manufacturing plants, service centers, and tool rooms. ● automatic band saw for metal ● trusted brand AMADA ● rigid construction – 2200 kg ● 5.5 kW saw motor ● industrial hydraulic system ● automatic cutting cycles ● high precision and repeatability ● suitable for solid materials and profiles Technical specifications ● Model: AMADA HFA 400 ● Type: automatic band saw ● Saw motor power: 5.5 kW ● Hydraulic motor: 1.5 kW ● Coolant pump: 0.18 kW ● Blade dimensions: -length: 4570 mm - width: 41 mm - thickness: 1.3 mm ● Power supply: 3-phase ● Connected load: 11 kVA ● Machine weight: approx. 2200 kg ● Year of manufacture: 2012 Condition: used, fully functional, ready for operation 📩 Contact us for price and further details.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, input voltage: 400 V, empty load weight: 6,000 kg, coolant pump power: 180 W, saw band length: 7,600 mm, saw band width: 50 mm, AMADA HFA 700 CNC – Fully Automatic Heavy-Duty CNC Band Saw Industrial metal cutting | Serial production | AMADA Japan The AMADA HFA 700 CNC is a fully automatic horizontal CNC band saw for metal cutting, designed for heavy-duty industrial applications and high-volume serial production. Its rigid 6000 kg construction and proven AMADA technology ensure stable, precise, and repeatable cutting results. Key advantages: ● fully automatic CNC band saw for metal ● AMADA – industrial-grade quality ● heavy-duty design, machine weight 6000 kg ● rigid frame minimizing vibration ● 7.5 kW saw motor ● hydraulic blade tensioning ● industrial blade size 7600 × 50 × 1.6 mm ● advanced CNC control – automatic cutting cycles ● ideal for serial production and continuous operation ● suitable for solids, profiles, and bundled materials Technical specifications ● Control system: CNC ● Saw motor power: 7.5 kW ● Hydraulic motor: 2.2 kW ● Coolant pump: 180 W Bwsdpfx Anjyc H H Uemsr ● Wire brush motor: 200 W ● Blade dimensions: 7600 × 50 × 1.6 mm ● Blade tensioning: hydraulic ● Power supply: 400 V / 50 Hz ● Connected load: 14 kVA ● Machine weight: approx. 6000 kg Condition: used, fully functional, ready for operation 📩 Contact us for price and further technical details.