Used Finger Jointing for sale (2,059)

Condition: refurbished (used), Year of construction: 2007, The PDFD joining line, in its single-milling version, consists of two main units: a milling and tenoning machine, DFC 60M (where the tenons on the strip ends are machined), and a length joining press, PHSL, where the elements are joined into a strip with a length of up to 6.6 meters. Podpfxjw Hrm Ne Agmegr Input package width for the milling and tenoning machine – 650 mm Width of glued elements – 30 ÷ 155 mm Length of glued elements – 170 ÷ 900 mm Thickness of glued elements – 20 ÷ 70 mm Compressed air consumption – 18 m³/h Working performance – cycles/min – approx. 2 (strip 6600) Length of the glued element – up to 5500 mm The machine is in excellent technical condition!

Condition: repair required (used), functionality: unexamined, Dovetail grooving system for wood packages dimter HK 400 Dovetail grooving system Input lengths: 800–6,000 mm Grooving height: 285 mm, optional 300 mm Color: Blue Consisting of: Pos. 01 Packaging unit Pos. 02 Package roller conveyor Pos. 03 Central milling cutter Pos. 04 Package roller conveyor Pos. 05 Package singulation unit Pos. 06 Chain transverse conveyor Pos. 07 Infeed roller conveyor Pos. 08 Cycle press Pos. 09 Feed unit Pos. 10 Crosscut saw Pgodpfxsvi Hw No Agmer Including control cabinets and operator panels The system requires repair and is sold in its current condition. It has already been dismantled and is stored in Achern. All technical documentation is available. We are available at any time to answer questions about the system and provide technical information. We will provide consulting support for the repair and reassembly.

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Pedpfx Aew Uf Tksgmsgr Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: V001175, Weinig GRECON TURBO S finger jointing line with integrated Timme stacking machine - German production - year of manufacture 2015 TECHNICAL PARAMETERS: Wood parameters Pgjdpfx Agjyrccdjmer - width 40 - 150 mm - thickness 20 - 80 mm - length 150 - 1000 mm - pressing length 3000 - 6100 mm - power consumption 145 kW - air consumption 4300 Nl/min - suction capacity 12088 m3/h - two milling stations - undercutters - package width 600 mm Folded machine dimensions - length 30000 mm - width 7000mm - height 2100 mm - required floor length: approx. 31000 mm - required width: approx. 8000 mm

Condition: excellent (used), total length: 3,000 mm, total width: 1,500 mm, Panel press in very good working condition + Grecon finger jointing Psdpfst Uduxox Agmegr

Condition: used, Sauter Type RS semi-automatic finger-jointing machine for joining timber workpieces using finger joints. The machine is suitable for processing offcuts and for producing extended solid timber lamellas. Consisting of: Sauter Type RS-FPEL 130 milling and gluing machine Sauter Type RS-DKPV 6 press Pgjdpfxsztvxyo Agmsr Sauter DAS 500 cross-cut saw Technical data: - Milling height: 130 mm - Max. overall length: 3,000 mm - Workpiece width: 45–95 mm

Condition: ready for operation (used), Compact Dovetail Joint Machine Capacity: approx. 4-6 joints/min. For wood sections with the following dimensions: Thickness: 30-120 mm Width: 75-250 mm Pressing force: 22.5 t Psdpfx Ajzmmr Rjgmjgr Automatic glue application via 2 glue combs, designed for processing PUR glue. Spring-mounted with a safety cut-out that immediately stops the milling and glue application feed in case of even the slightest load. All parts are chrome-plated. Electrical system with PLC Milling motor power: 22.00 kW Hydraulic unit: 29.50 kW Oil cooler: 0.75 kW Infeed feed: 1.50 kW Outfeed feed: 2.50 kW Cut-off saw: 3.00 kW Total power consumption: 59.25 kW = 120 Amperes

Condition: used, Year of construction: 2009, functionality: fully functional, type of input current: AC, total width: 1,350 mm, total length: 1,200 mm, total height: 1,300 mm, spindle speed (max.): 3,900 rpm, overall weight: 530 kg, input voltage: 400 V, milling spindle length: 200 mm, rotational speed (min.): 3,900 rpm, rotational speed (max.): 3,900 rpm, working width: 200 mm, spindle diameter: 50 mm, We are offering this used Omec F10/200 fork cutter, manufactured in 2009. Manufacturer: Omec Model: F10/200 Year of manufacture: 2009 Condition: used Machine type: Fork cutter, finger fork, drawer fork Pgjdpfx Agszmug Nomor Fully functional OMEC F10/200 milling machine for the production of finger forks for drawer blade manufacturing. Manufactured in 2009, motor power 11.5 kW, spindle diameter 50 mm and weight approximately 530 kg. Without fork cutter set. The machine is in good condition and can be inspected and demonstrated by appointment. Loading and transport can be arranged.

Condition: excellent (used), DIMTER HK 400 – AUTOMATIC FINGER JOINTING LINE Pgsdpfx Agoxvniijmsr For sale is a fully automatic finger jointing line for wood, DIMTER Type HK 400 E/D. This is an advanced system designed to maximize efficiency and quality in the jointing of both hardwood and softwood.

Condition: excellent (used), Year of construction: 2017, I sell the finger joint line GOMA FZ10 KZ6 + PZ6. Year 2017. Manual feeding to the press Press 6,10m with automatic cycle and end-cutting saw Podpfov A Sn Hsx Agmjgr Strong construction. Very good condition. Available immediately.

Condition: like new (used), Year of construction: 2010, operating hours: 200 h, functionality: fully functional, Finger-jointing line, like new, only operated for 60 days. Pgjdpfsyl Nuajx Agmjr

Condition: good (used), Year of construction: 2010, functionality: fully functional, milling height: 180 mm, WEINIG NKT Dovetail Joint Line, Double Pack DP20 An industrial dovetail joint gluing system – developed for maximum precision and efficiency. Technical Specifications: Wood input length: min. 130 mm | max. 1000 mm Wood output length: min. 3700 mm | max. 7400 mm (saw included = half lengths possible!) Wood cross-section: min. 20 x 40 mm | max. 80 x 180 mm Cutter diameter: 370 mm Dovetail configuration: Vertical / Horizontal, 10/11 dovetails, 3.8 mm pitch Glue application: 2-sided, PVAC wood glue Connected load: 80 kW Note: The machine is currently disassembled and is in our warehouse. An inspection is possible by appointment. Scope of delivery: WEINIG NKT Double Pack DP20 incl. control unit Integrated gluing station for 2-sided application Operating manual & documentation Hydromat 17B (7 spindles) General information Manufacturer: Weinig AG Model: Hydromat 17B // 7 spindles (various tools) Type: High-performance profiling milling machine / planing and rabbeting machine Year of manufacture: 1989 Operating voltage: 380 V / 50 Hz Bottom-Right-Left-Right-Left-Top-Bottom table, fixed Description Heavy-duty, high-performance planing and rabbeting machine made of vibration-dampening and torsion-resistant cast iron components in a modular system. Designed for precise and economical woodworking with high continuous performance. Mechanical feed, adjustable in the range of 5 – 35 m/min, feed motor 5.5 kW (7.5 hp). Surfacing table 2 m long, quick adjustment available. Chip removal for surfacing and jointing spindles, adjustment range 10 mm each. Technical data • Feed speed: 5 – 35 m/min, mechanical • Feed motor: 5.5 kW / 7.5 hp Psdpezwp Ucsfx Agmegr • Operating voltage: 380 V / 50 Hz • Table length: 2000 mm • Adjustment range for chip removal: 10 mm (surfacing and jointing side) • Machine design: Without counter bearing, in high-performance design

Condition: good (used), Year of construction: 1990, I sell the combined tenonging machine with drilling head BALESTRINI I2F 1 tilting table with pneumatic material pressure. Automatic cutting saw from bottom. Psdpshw Dfnjfx Agmogr Tenoning milling head able to do the finger-joint as well. Drilling head for dowel holes production 3 spindles. Revolving 360° enabling any position. Feeding automatic. Positioning on end-sensors. Available immediately.

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) Pgsdpfjwclkyex Agmjr - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 71, Finger Jointing Line GOMA FC10 KZ6 + FC10 PZ6 TENONER FC-10KZ-6 Milling spindle 50 x 210 mm Main motor 18.5 kW Chipper 300/60 x 8 mm, 6 kW Scribes for "line-to-line" jointing 2x160mm, 1.1 kW Working table width 600 mm Package height 30 to 150 mm Podpfx Agey Sw Uvsmegr PRESS FC-10PZ6 Package width 30-150 mm Thickness 20-70 mm Hydraulic pump 100 bar Finished board length 6000 mm Possible intermediate cuts, e.g. 2x3000mm, 6x1000mm, etc. Machine in good working condition, used. Good technical condition. Price 110,000.00 PLN net, negotiable.

Condition: ready for operation (used), For sale: Famad longitudinal wood jointing line. PDFD jointing line in double-tenoner version, including a lengthwise jointing press, allowing wooden elements to be joined into strips up to 7 meters long. Pgodpfjyr Adujx Agmer For more information, please call: 604205076.

Condition: used, Stress line and finger joint line capable of producing lengths up to 13 m, which is the maximum length the planer line can handle. Pgodpfxjzaazge Agmjr This can be sold in two different packages: either the stress line and finger joint line together, or the planer line separately. For more information, please contact us.

Condition: used, Price on request. Pjdowwg Amepfx Agmsgr Comprising: Minda grading line for stack and lamella dimensions Stack width: max. 1,200 mm Stack height: max. 1,200 mm Stack length: 2,000–5,000 mm Stack weight: max. 3 t Lamella width: 80–260 mm Lamella thickness: 23–80 mm (typically 46 mm in the rack) Cross-section: max. 80 x 260 mm = 208 cm² Performance of vacuum stacking with lifting column: Section I: 3 layers/min Section II: 2 layers/min Finger jointing by Grecon Destacking, planing line and cross transfer platforms by Minda

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 89257, pressing force: 60 t, input voltage: 380 V, total height: 2,000 mm, type of input current: three-phase, working height: 2,000 mm, total length: 9,500 mm, control cabinet width: 1,000 mm, total width: 2,000 mm, year of last overhaul: 2026, pressure: 100 bar, control voltage: 12 V, workpiece height (max.): 120 mm, rotational speed (max.): 6,000 rpm, air pressure: 8 bar, We offer this ready for use WEINIG Dimter HK200 finger jointing line, year of construction 1996. Pjdpfx Aozatztsgmsgr If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2004, I sell the semi-automatic finger joint line GreCon Profijoint PJ7/6100-LI. Year 2004. Input length 100-1.000mm Input width 40-150mm / 510mm in 1 step Input thickness 20-50mm Podpfxemig Tdo Agmsgr Automatic finger joint unit with glue spraying 1 side Automatic turning of the material for the 2nd pass on turning table Automatic feeding to the press Press 3,00 - 6,10m with automatic cycle and end-cutting saw Total area covered 10.50 x 3.50 m Strong construction. Very good condition. Available immediately.

Condition: repair required (used), Year of construction: 1993, machine/vehicle number: 624/9, pressing force: 10 t, working height: 805 mm, total length: 1,900 mm, Finger joint press Pgodpfxjt Sc T Is Agmjr Cycle press for finger joint connections Finger jointing press Pressing force 10 t Wood width 80 - 300 mm Wood thickness 18 - 100 mm OPTIONAL with hydraulic unit

Condition: ready for operation (used), -packet-jointing line -for timber infeed 900-5.100 mm Pgsdpfebqqzgox Agmer -double-roller conveyor -cut saw with marking recognition 15 KW -packaged -finger jointing milling automate 80 KW -singling cross conveyor -roller conveyor -cycle press hydraulic 20 KW -automatic under table circular saw 5 KW -wood widths of 70 - 255 mm -wood thickness from 22 to 140 mm -wood input from 900 to 5100 mm -pressing force 12 tons -capacity from 7.000 to 10.000 meters / 8 h -options example cycle press 25 to or 40 to

Condition: like new (used), Handling equipment for a finger jointing line. Roller conveyors, wide- and narrow belt conveyors, a trim saw conveyor, trim saws, etc. See pictures. With documentation. Good condition, made by Martek in Finland. Pedpfx Agsd Duz Eomogr

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Set for micro-dovetail jointing for high-volume and mass production Features: – High-performance production line, – Heavy-duty working units, – High feed rates, – Accelerated handling movements ensure high throughput. Depending on the desired output, additional buffer conveyors can be integrated to speed up the production process. TENONER FC-10KZ-6 Specifications Values Milling spindle 50 x 210 mm; 5,500 rpm Spindle motor 18.5 kW Chipper saw (special) 300/60 x 8 mm Saw motor 6 kW Working table width 600 mm Workpiece package height 30 to 150 mm PRESS FC-10PZ6 Specifications Values Board width/thickness 30-150 mm / 20-70 mm Finished board length 6,000 mm Line capacity up to 15,000 linear meters/shift The following modifications and upgrades have been made to the machine: - New electrical installation - Machine controller replaced with SIEMENS SIMATIC S7 and SIEMENS SIMATIC HMI panel - New infeed table before the tenoners with buffering system - New board turning mechanism – side feeder after tenoners (chain-driven turning mechanism controlled by frequency inverter) - New chain feeder before the press (length 4,500 mm) Pjdpfsx Idl Hex Agmsgr - Additional pre-scoring aggregates for finger-joint gluing – furniture board installed at the tenoners Machine dimensions: 16.5 m x 5 m

Year of construction: 1997, condition: ready for operation (used), Workpiece dimensions: 150-1000x50-205x35-50mm, end length: 3000-6000mm, connected load: 80kW, length: 15,480mm, width: 5500mm, height: 2000mm, weight: 10.5t, including documentation. Pgsdoign Efspfx Agmjr