Used Amada Ac 2510 Nt for sale (214)

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, machine/vehicle number: 64050018, saw band length: 3,505 mm, saw band width: 34 mm, cutting range round steel at 90°: 250 mm, cutting width (max.): 300 mm, cutting height (max.): 250 mm, saw band speed: 15,000 mm/s, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the period from 28.07.2025 to 31.07.2025. TECHNICAL DETAILS Cutting capacity for single cuts Round material: 250 mm Square material: 250 x 300 mm Cutting capacity for bundle cuts Square material: 50 x 150 mm to 150 x 150 mm Saw band dimensions: 3,505 x 34 x 1.1 mm Motor power: 3.7 kW, 4P Hydraulic motor: 0.75 kW, 4P Coolant pump motor: 0.12 kW, 2P Saw band speed: 24 – 90 m/min at 50 Hz Kjdjwvh E Hspfx Ah Njll Saw band swivel angle: 45° Coolant Tank capacity: 85 l Pump: centrifugal pump Hydraulic unit Tank capacity: 30 l Pump output: 20 l/min Set pressure: 2.7 MPa Table height: 700 mm Load capacity: 1,500 kg MACHINE DETAILS Dimensions: 5,200 x 2,100 x 1,700 mm Weight: 1,700 kg Transport dimensions: 1,962 x 2,384 x 1,285 mm Machine transport weight: 1.5 t Serial number: 64050018 Supply voltage: 3-phase, 400 VAC ±10%, 50 Hz Connected load: 8 kW EQUIPMENT - Technical documentation - Additional roller conveyor - Support length: approx. 3,000 mm - Total support length: approx. 5,000 mm

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 44650046, saw band length: 4,570 mm, saw band width: 41 mm, cutting height (max.): 400 mm, saw band speed: 1,500 mm/s, No minimum price – guaranteed sale to the highest bidder! Placing a bid obliges collection within the period from 28.07.2025 to 31.07.2025. TECHNICAL DETAILS Cutting capacity round material: Ø 406 mm Cutting capacity square material width: 400 mm Klsdpfxewvhxas Ah Nol Cutting capacity square material height: 400 mm Maximum machine load capacity: 2,500 kg Maximum roller conveyor load capacity: 2,000 kg/m Min. workpiece remnant length ensuring clamping edge: 76 mm Min. workpiece remnant length without workpiece detection: 30 mm Saw blade dimensions: 41 x 1.3 x 4,570 mm Cutting speeds: 15 to 90 m/min (50 Hz) Cutting speeds: 17 to 90 m/min (60 Hz) Clamping device pressure adjustment: 570 – 1750 N Cut-off length: 10 to 5,040 mm Increments: 0.1 mm Single feed: 570 mm MACHINE DETAILS Installation dimensions: 5,200 x 2,350 x 2,000 mm Weight: 2,950 kg Saw drive motor: 5.5 kW, 4 pole Hydraulic pump motor: 1.5 kW, 4 pole Coolant pump motor: 0.18 kW, 2 pole Connected load: 12.3 kVA Machine dimensions length: 3,006.5 mm Machine dimensions width: 3,288 mm Machine dimensions height: 2,564 mm Working height: 842 mm Hydraulic oil tank: 40 litres Cutting fluid tank: 120 litres EQUIPMENT - With technical documentation - Additional roller conveyor - Support length: approx. 2,000 mm - Total support length: approx. 5,040 mm

Condition: excellent (used), sheet width 2500 mm plate thickness 4 mm Control GPN weight of the machine ca. 5000 t Kjdovwgpnjpfx Ah Njll dimensions of the machine ca. 3000 x 2000 x 1700 m

Condition: excellent (used), Year of construction: 2017, table length 3000 mm table width 1500 mm burner heads 1 Ksdevwgu Dopfx Ah Nsll Control FANUC AF3500i-C total power requirement 3,5 kW weight of the machine ca. 12,5 t dimensions of the machine ca. 12300 x 6000 x 2200 m

Condition: used, Max. cutting length: 3000 mm Max. sheet thickness: 12 mm steel Controlled back stop up to 1000 mm Side stops and table extensions cutting length limitation Cutting edge lighting Kodpfx Ahotx E E Io Njll Light barriers for the rear area Replacement blades Weight approx. 9000 kg

Condition: good (used), total width: 3,000 mm, pressing force: 100 t, Manufacturer: AMADA Type: HFE 100-3L + ASTRO 50Y Control: Operator Year of manufacture: 2007 Long stroke CNC Press brake 8 Axis controlled ASTRO 50Y AMADA Robot ASTRO 50 Y bending cell is composed of an HFE Pressbrake associated with an 7-axis robot. When machining medium / fine thick and large dimension parts. Machine turns out to be highly polyvalent thanks to a 4-m long linearaxis and numerous grippers. Programming has become particularly easy through EASY CAM software Safety CE Fence around machine and tobot Specifications Metric US Standard There are no specifications for this machine (yet). Kedpfx Aovwcdush Noll Dimensions (estimate) Length 8000mm Width 4000mm Please note: The information on this page is correct to the best of our knowledge and belief, and where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1991, cutting force: 250 t, sheet thickness (max.): 6 mm, cutting length (max.): 220 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Sheet thickness: 6 mm Pressure: 250 t Blade length: 220 mm Kodpfx Ajwf It Ash Nsll Stroke length: 24 - 26 mm Ram stroke: max. 32 mm MACHINE DETAILS Machine weight: 1,600 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, working width: 2,500 mm, pressing force: 80 t, table width: 60 mm, TECHNICAL DETAILS Pressure: 80 t Bending length: 2,500 mm Table width: 60 mm Kledpfx Ahowmdf Ds Nsl Working height: 960 mm Dimensions and clearances Clearance between columns: 2,160 mm Clearance between press beams: 370 mm Thrust: 400 mm Weight Machine weight approx.: 5,000 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, bending force (max.): 220 t, working width: 4,200 mm, stroke length: 350 mm, installation height: 620 mm, table height: 960 mm, TECHNICAL DETAILS Press Data Press force: 220 t Bending length: 4,200 mm Distance between uprights: 3,760 mm Ksdpfjw Dcdtjx Ah Njll Stroke: 350 mm Installation height: 620 mm Table width: 180 mm Table height: 960 mm Approach speed: 100 mm/s Control: AMADA OP 2000 MACHINE DETAILS Connected load: 20 kW Machine weight approx.: 20,000 kg Operating hours: 8,444 h EQUIPMENT Backgauge type B Laser safety set Digital angle measurement system Digipro 2-finger kit Manual support system WILA Modufix system WILA hydraulic unit

Year of construction: 2004, condition: used, table length 1250 mm table width 1250 mm Klsdpfxehly Hls Ah Nsl burner heads 1 Control Fanuc output 1000 Watt travel -z axis 100 mm travel x / y 1260/1260 mm traversing speed 30/30/42 mm/sec gas consuption 10 Liter/Std. total power requirement 22 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 10 m

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 400 mm, installation height: 650 mm, operating speed: 7 mm/s, reverse speed: 55 mm/s, total length: 8,400 mm, total width: 3,100 mm, total height: 4,620 mm, power: 47 kW (63.90 HP), travel distance Z-axis: 300 mm, empty load weight: 90,000 kg, passage width: 7,210 mm, table width: 350 mm, - 8 assen: Y1 / Y2 / X / R1 / R2 / Z1 / Z2 / V - nieuwe 2D Touch grafische besturing - zware achteraanslag - Amada-bomberingssysteem (V) - nieuw laserbeveiligingssysteem Machine kan gedemonteerd worden in onderdelen, kan in containers worden getransporteerd Ksdpfx Aowu Inloh Nell Capacity: 630 ton x 8100 mm Backgauge: heavy duty CNC Locking speed: 70 mm/sec Power needed: 380V

Condition: good (used), Year of construction: 2002, operating hours: 43,000 h, machine/vehicle number: V020113, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with cnc control, Model Amada HFT 8025 downstoke CNC Press brake Year 2002 Tonnage 80 KN Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 9kw Weight 5750 kg Kljdpfxjuwktns Ah Njl Bed Length 2500 mm Bed Width 180 mm Open Height 470 mm Throat Depth 420 mm CNC Control

Condition: ready for operation (used), Year of construction: 2000, operating hours: 20,000 h, functionality: fully functional, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,500 mm, TECHNICAL DETAILS Sheet size: 1,500 x 3,000 mm MACHINE DETAILS Kodpow Swdisfx Ah Nell Operating hours: 20,000 h EQUIPMENT Material handling Tools Grinding machine

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 5820387, punching force: 30 t, sheet thickness steel (max.): 8 mm, working range: 3,000 mm, travel distance X-axis: 2,500 mm, CNC punching machine with fully automatic loading system TECHNICAL DETAILS Control: CNC AMADAN 04 P-C Automation & Safety Loading system: LKI L III 250 automatic loader Unloading system: PR III automatic unloader Sorting: Automatic part sorting on pallets possible Noise protection: Noise protection hood Safety equipment: SICK photoelectric sensors, original safety fences Processing capacity Punching force: 30 t Max. material thickness (steel): 8 mm Working area: 3,000 mm X-axis travel: 2,500 mm Table system Table type: Brush table for quiet operation and scratch-free processing Repositioning: Automatic sheet repositioning Tool lubrication: Air Blow automatic lubrication Punching Pneumatic punches: 2 pieces MACHINE DETAILS Power supply: Three-phase Overall length: 15,000 mm Total width: 5,000 mm Total height: 2,000 mm Punching machine weight: 16 t Loader weight: 2.3 t EQUIPMENT - Automatic loader LKI L III 250, built in 2011 - Automatic unloader PR III Kjdpfowc S R Hjx Ah Nsll - Noise protection hood - SICK photoelectric sensors - Original safety fences - Brush table - Automatic sheet repositioning - Air blow lubrication - Two pneumatic punches Further technical details according to the manufacturer - without guarantee Ram stroke: 31.9 mm Max. hole diameter: 114.3 mm Punching frequency (X/Y direction) Stroke length: 8.0 mm – Pitch: 25.4 mm – Stroke frequency: 300 / 375 strokes/min Stroke length: 4.5 mm – Pitch: 25.4 mm – Stroke rate: 375 / 375 strokes/min Stroke length: 4.5 mm – Pitch: 2.0 mm – Stroke rate: 600 / 600 strokes/min Tool turret Tool type: Amada Thick Turret Turret speed: 25 rpm Turret capacity: 58 stations (4 of which are auto-indexable) Accuracies Punching accuracy: ± 0.10 mm Positioning accuracy: ± 0.025 mm Repeat accuracy: ± 0.025 mm

Condition: good (used), Year of construction: 1997, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 5820387, punching force: 30 t, total height: 2,000 mm, total width: 5,000 mm, total length: 15,000 mm, sheet thickness steel (max.): 8 mm, working range: 3,000 mm, type of input current: three-phase, travel distance X-axis: 2,500 mm, Amada VIPROS 358 KING + LKI L III 250 automatic loader + PR III automatic unloader + noise protection cover . It can work complete automatic , also sorting your parts on the pallet . Ksdpfjvb Dn Aex Ah Noll The machine was verry well mentained , we bought this machine and did not finish installation because we bought a new machine . The machine has SICK light barriers and original protection fences . For more informations please contact me . CNC AMADAN 04 P-C N. 2 pneumatic punches Brush table for low noise operation & scratch free processing Device for automatic repositioning of the sheet metal Air Blow automatic tool lubrication

Condition: good (used), functionality: fully functional, Year of construction: 1987, working width: 2,000 mm, stroke length: 105 mm, distance between stands: 1,600 mm, overall weight: 4,300 kg, total width: 2,000 mm, pressing force: 50 t, Promecam ITP2-050-20 Converted to Delem DA 65R control system in 2019 15" touch screen with graphics Bending length 2000 mm Kledpfju Dm Iujx Ah Nol stand passage 1600 mm Bending pressure 50 T CNC back gauge X-R-Z1+Z2 axis Connected load 7.5kw Stroke 105mm Intermediate pieces Int100 Front support tables Amada tool system incl. many tools

Condition: excellent (used), Year of construction: 1991, AMADA MODEL HFBE 170-3 170 tons x 3000 complete with DELEM DA 58 MULTI AXIS CNC CONTROL ERWIN SICK MACHINE MOUNTER ELECTRONIC GUARDING SUYSTEM SIDE AND REAR INTERLOCKED FENCING Bending force: 170 T Bending length: 3100 mm Distance between uprights: 2650 mm Kodpewcd Spsfx Ah Noll Cnc control: DELEM DA 58 Throat: 410 mm Vertical stroke: 180 mm Working speed: 10 mm/s Axis number: 6 Including Z axis Motor Power: 13 kW Machine weight: 10500 kg Machine dimensions (LxWxH): 3200 x 1700 x 2500 mm

Condition: excellent (used), Model Amada HF5012, 4 axis CNC Press brake Year 2003 Tonnage 50 tons CD 2000 control with monitor Erwin Sick machine mounted light screen guarding system, side and rear interlocked fencing Max. Bend Length 1270 mm Width Between Columns 1035 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 6 kw Weight 3100 kg Dimensions Machine Length 2165 mm Machine Width mm Ksdpfx Aevxuk Nsh Noll Bed Length mm Distance Between Bed Bed Height 960 mm Machine Height 2300 mm Daylight Gap mm Throat Depth mm BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, Year of construction: 2003, table length 5040 mm table width 1550 mm 12 mm Ksdpfx Ahsvxwytj Njll plate weight max. 330 kg travel -x axis 2520 mm travel -z axis 300 mm travel -y axis 1550 mm cutting speed 20 m/min feed speed X/Y/Z 80/80/60 m/min positioning accuracy +-0,01 mm/500 mm mm repeatability +/- 0,005 mm table height 820 mm size of opening 550x1550 mm compressed air 6/20 bar total power requirement 10 kW weight of the machine ca. ca. 6,5 t dimensions of the machine ca. 2,5x5,7x2,3 m Turbo blower replaced at 36,000 hours Compressed air dryer Alphapac 0015 SP Basement flue gas extraction type Vario T 1.5A Air conditioning unit RIEDEL PC 315.21-NE-LAS Laser radiation within class 1 The machine was regularly serviced

Condition: good (used), Year of construction: 2003, Amada HFP 100-3L (long stroke) 8-axis press brake Year: 2003 Tonnage: 100 tons Ksdpfxevn S I Do Ah Noll Max. Bending length: 3110 mm Standard stroke: 350 mm Approach speed: 100 mm/sec Bending speed: 10 mm/sec Return speed: 100 mm/sec Weight: 7100 kg Dimensions Machine length: 4498 mm Machine width: 2450 mm Beam width: 60 mm Distance between side frames: 2705 mm Machine height: 2860 mm Open height: 620 mm CNC control type: AMNC Display: Touchscreen Akas laser protection Controlled axes: 8 axes, Y1, Y2, X1, X2, R1, R2, Z1, Z2 Documentation available Digipro angle measuring system Supplied with 1 set of tools

Condition: refurbished (used), Year of construction: 2005, AMADA MODEL HFE 130-3 130 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 130-3 downstroke CNC Press brake Year 2005 hours 9000 Tonnage 1300 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R1 R2 Z1 Z2 Max. Bend Length 3000 mm Open height 470 mm Stroke Length 200 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity 110 LITRES Motor Power 11 kw Weight 7800 KG kg Kedpfx Ahsthgido Noll CNC Control Backgauge Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: like new (used), Year of construction: 1999, AMADA MODEL ITS2 50-20 50 TONS X 2000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 5 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1999 stock no. 01917 Ksdpfxjpygyde Ah Noll description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 50 TONS BENDING LENGTH 2000 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 5 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: good (used), functionality: fully functional, We are selling a used Amada CTB 400 (carbide-capable bandsaw) with 3m powered roller conveyor and 6m outfeed roller conveyor. Technical specifications: - Cutting capacity round: 430 mm - Cutting capacity square: 430 x 430 mm Ksdpfx Ajwybkdoh Nsll - Cut-off length: 5 - 9999 mm - Bandsaw motor power: 7.5 kW - Total power: approx. 10 kW - Saw blade dimension: 4715 x 41 x 1.3 mm (suitable for carbide) - Variable blade speed: 15 - 150 m/min - Feed length: 10 - 9999 mm - Minimum remnant length: 15 mm - Dimensions (W x D x H): 2630 x 2740 x 2422 mm - Weight: approx. 4500 kg CNC control: Speed / Power Material / Cross-section Parallelism display Automatic parameter correction

Condition: used, Year of construction: 1990, pressure:80 t chamfer lenght:2505 mm distance between columns:2200 mm total power requirement:7,3 kvA Kljdpocxxvgjfx Ah Njl weight of the machine ca.:5,6 t dimensions of the machine ca.:3 x 2,25 x 2,20 m

Condition: used, Year of construction: 2013, laser capacity in Watt 3500 travel -x axis 3070 mm travel -y axis 1550 mm Control AMNC-F table load capacity 920 KG material length max. 3050 mm Klsdpfx Ahev Nq Rgs Nsl material width max. 1525 mm total power requirement 30 kW weight of the machine ca. 8,2 t dimensions of the machine ca. 10,00 x 2,90 x 2,20 m