Used Amada Ac 2510 Nt for sale (221)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 50,000 h, control type: CNC control, actuation type: electric, controller manufacturer: Fanuc, laser type: CO₂ laser, laser hours: 50,000 h, laser power: 2,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, table length: 5,040 mm, table width: 1,550 mm, working length: 2,520 mm, working width: 1,500 mm, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 60 m/min, workpiece weight (max.): 330 kg, type of cooling: water, overall weight: 6,500 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, Amada CO2 laser. Purchased in 2006. Operated intensively until 2017. In 2017, we acquired a fiber laser, and since then this unit has been used only occasionally for specialised tasks. The laser is fully operational but requires an inspection of certain components. X-axis is virtually unlimited after repositioning; Y-axis – 1500 mm. The laser is housed in a heated hall and has not been exposed to weather conditions. If purchased, we can assist with arranging loading onto transport. Hjdpfjyly Hmjx Ak Dol

Condition: good (used), functionality: fully functional, Hydraulic press brake: AMADA type ITS2 25-12, year: 1993, very robust model from the leading manufacturer of this machine type. Bending length: 1250 mm; Between uprights: 1050 mm, Opening: 200 mm, stroke 180 mm; Pressure: 25 t. OPEII operator panel with graphic CNC control, Polish language, 14" color TFT screen. Controlled axes: -Y-X-R1-R2 + automatic table bending compensation. Machine weight 2.3 tons. Drive power 4.5 kW. Hedpfxsyf Akhj Ak Dsl

Condition: excellent (used), Used Amada 60ton C frame press for sale SPECIFICATION MODEL TP -60 Hedsyk D Dtopfx Ak Dol CAPACITY 60 ton NUMBER OF SLIDE STROKES 50 Hz 45-80 strokes/ minute STROKE LENGTH 120 mm SLIDE ADJUSTMENT 70 mm SLIDE AREA (R-L x F-B) 500 x 400 mm BOLSTER AREA & THICKNESS (R-L x F-B x thickness) 900 x 550 x 80 mm SHUTHEIGHT 370 mm MAIN MOTOR 5.5 x 4 kWXP AIR PRESSURE REQUIRMENT 5.0 kgf/cm2 MAXIMUM NUMBER OF FLYWHEEL ROTATIONS 1170 r.p.m. MINIMUM AIR PRESSURE FOR CLUTCH ON STOPPING TIME 165 msec BRAKE MONITOR SETTING, DEGREES BEYOND T.D.C. 15 degree SERIAL NO. 07312665 MANUFACTURE DATE 1992.4 MANUFACTURED BY AMADA CO., LTD.

Condition: used, Max. cutting length: 3000 mm Max. sheet thickness: 12 mm steel Controlled back stop up to 1000 mm Side stops and table extensions cutting length limitation Cutting edge lighting Photoelectric sensors for the rear area Replacement blades Weight approx. 9000 kg Good condition Hedpfxetx E E Is Ak Dol

Condition: good (used), pressing force: 100 t, total width: 3,000 mm, Manufacturer: AMADA Type: HFE 100-3L + ASTRO 50Y Control: Operator Year of manufacture: 2007 Long stroke CNC Press brake 8 Axis controlled ASTRO 50Y AMADA Robot ASTRO 50 Y bending cell is composed of an HFE Pressbrake associated with an 7-axis robot. When machining medium / fine thick and large dimension parts. Machine turns out to be highly polyvalent thanks to a 4-m long linearaxis and numerous grippers. Hsdovwcduspfx Ak Del Programming has become particularly easy through EASY CAM software Safety CE Fence around machine and tobot Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) Length 8000mm Width 4000mm Please note: The information on this page is correct to the best of our knowledge and belief, and where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: excellent (used), Technical data: Working length: 4100 mm Frame width: 3650 mm Pressing force: 220 tons CNC control: OPERATOR OPII graphic Color display size: 14" Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motorized adjustable backgauge Throat depth: 300 mm Stroke: 180 mm Automatic crowning Hodpfxoykkrkj Ak Djl Motor power: 17 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 17 tons Accessories: AMADA tools (new) The seller is not liable for typographical or data transmission errors. The machine is in a condition regarding appearance, technology, and wear appropriate to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2006, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 200 mm Hodetv Rlbspfx Ak Del max. opening beam/table 470 mm C-recess 350 mm max travel X-axes 700 mm Z1+Z2 axes controlled by cnc nein, manuell 4 finger mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 43000 h length 3100 mm width 1600 mm height 2550 mm weight 5750 kg total power requirement 9 kW dimensions of the machine ca. 3x2x2,5 m Control Amada OP2002 All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: used, Year of construction: 2008, table length 2550(5040) mm table width 1550 mm burner heads 1 Hjdpfx Akevf Rhds Del axis stroke (X,Y,Z) 2520(5040)x1550x300 mm laser capacity in Watt 4000 watt control AMNC-F Number of working hours 34981 h Steel sheet steel 12 mm Thickness V2A 8 mm Thickness Alu 6 mm Cutting speed X/Y/Z 80/80/60 m/min max. table load 330 kg Laser gas consumption L/h Dimensions of machine: length 6000 mm width 2600 mm height 2300 mm weight 7,7 t Power connection 69 kVA

Condition: used, Year of construction: 2004, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 350 mm max. opening beam/table 620 mm C-recess 420 mm traveldistance X1+X2 cnc programmable 700 mm Z1+Z2 axes controlled by cnc 0-2000 mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 24000 h length 3380 mm Hedpsxyzzaefx Ak Dsl width 1800 mm height 2750 mm weight 6100 kg total power requirement 9 kW dimensions of the machine ca. 3x2x2,5 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Year of construction: 2004, condition: used, table length 1250 mm table width 1250 mm burner heads 1 Control Fanuc output 1000 Watt travel -z axis 100 mm travel x / y 1260/1260 mm Hedpfxehly Hls Ak Del traversing speed 30/30/42 mm/sec gas consuption 10 Liter/Std. total power requirement 22 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 10 m

Condition: excellent (used), Year of construction: 2000, Technical specifications: Working length: 3100 mm Frame width: 2760 mm Press force: 170 t CNC control: OPERATOR Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 automatic crowning motorized adjustable backgauge Throat depth: 410 mm Stroke: 200 mm Working height: 960 mm Motor power: 16.5 kW CE mark Dimensions (Length x Width x Height): approx. 3500 x 2200 x 2900 mm Weight: approx. 11 tons Accessories: Hodeyi Updjpfx Ak Dol 1 pc. new upper tool 1 pc. new 4-sided die The seller is not liable for any typographical or data transmission errors. The machine is provided in a condition appropriate to its age for appearance, technology, and wear; used machines are sold without any guarantee or warranty.

Condition: excellent (used), Year of construction: 2003, Technical specifications: Working length: 4230 mm Distance between uprights: 3650 mm Pressing force: 170 t CNC control: AMADA Operator III graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 motorized adjustable backgauge Stroke: 400 mm automatic crowning Working height: 960 mm Motor power: 16.5 kW CE marking Dimensions (length x width x height): approx. 4700 x 2200 x 2900 mm Weight: approx. 14.8 tons Accessories: automatic measurement of the workpiece bending angle with automatic correction in the control system lateral movable safety fences LAN network operation infrared light curtain at the front and rear Hedsyi Ud Uspfx Ak Dol Condition: Very good condition, only 9,000 operating hours The seller is not liable for typographical or data transmission errors. The machine is sold in accordance with its age, using, technical condition and wear; used machines are sold without any guarantee or warranty.

Condition: excellent (used), Year of construction: 2008, Technical Data: Laser type: CO2 Travel: X-axis: 1260 mm Y-axis: 1260 mm Z-axis: 100 mm Max. workpiece dimensions: 1250 x 1250 mm Max. workpiece weight: 160 kg Laser power: 2 kW Cutting capacity (steel): 12 mm Control: FANUC 16 iL Resonator: FANUC AF 2000 Compressed air requirement: 20 m³/h Electrical connection: 400 V / 50 Hz Connected load: 70 kVA Hjdeyigrzjpfx Ak Dsl Dimensions (L x W x H): approx. 3200 x 2200 x 2100 mm Weight: approx. 4.2 t Special equipment: HS-2003 sensor cutting head High-pressure cutting device: Clean Cut Aluminum cutting device: Alu Cut Exhaust system Cooling unit The seller accepts no liability for typing or data transmission errors. The machine's visual and technical condition, as well as wear, correspond to its age; used machines are sold without any warranty.

Year of construction: 2010, condition: ready for operation (used), A CNC sheet bending machine Amada is available. Working width: 4000mm, pressing force: 2200kN, stroke: 350mm, axes: 8. Machine dimensions X/Y/Z: approx. 5600mm/2650mm/3300mm, weight: approx. 18000kg, control: Amada. An on-site inspection is possible. Hedpfxexv A E Sj Ak Dsl

Year of construction: 1998, condition: ready for operation (used), Travel X/Y/Z: 2520mm/1550mm/300mm, max. sheet dimensions X/Y: 5040mm/1550mm, max. material thickness mild steel/stainless steel/aluminum: 12mm/6mm/3mm, max. workpiece weight: 330kg, positioning speed: 80m/min/80m/min/60mm/min, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 5650mm/3650mm/2100mm, weight: approx. 6600kg, operating hours: 29499h. Including Fanuc Laser-Model C1500. Documentation available. On-site inspection is possible. Hodpev Ip R Asfx Ak Del

Year of construction: 1995, condition: ready for operation (used), A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible. Hedpfxewm Nn Ro Ak Djl

Year of construction: 2012, condition: ready for operation (used), An Amada CNC 5-axis profile grinding center including an extraction and filtration unit is available. Travel X/Y/Z: 300mm/250mm/88mm, rapid traverse X/Y: 2000mm/min, rapid traverse Z: 500mm/min, max. workpiece diameter: 80mm, max. workpiece weight: 4kg, chuck diameter: 150mm, positioning resolution: 0.0001mm, positioning accuracy X/Y: +/-0.05µm, repeatability: +/-0.2µm, rotary table: 360°, rotary table resolution: 0.0001°. Grinding wheel dimensions X/Y/Z: 75mm-100mm/4mm-6mm/22.23mm, spindle speed: 20000rpm. Machine dimensions X/Y/Z: approx. 1650mm/2100mm/1750mm, weight: approx. 4000kg, control: Fanuc Series 32i-B. Including Amada Wasino TWCE extraction and filtration unit. Documentation available. An on-site inspection is possible. The machine is located in China. Hodpsxfknasfx Ak Dsl

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, pressing force: 80 t, Equipment: safety light barrier, Brand: Amada Type: ITS 80-25 Year of manufacture: 1994 Pressing force: 80t Bending length: 2500mm Throughput: 400mm Stroke: 100mm Power: 9.5kW Overall dimensions: 3010*2230*2230mm Weight: 4950kg Hjdpevncifefx Ak Del

Condition: excellent (used), functionality: fully functional, actuation type: mechanical, coil inner diameter: 200 mm, coil outer diameter: 800 mm, coil weight: 100 kg, coil width: 220 mm, for sale AMADA ORII manual sheet metal winder cable winder manufacturer/type AMADA ORII ST 02 Z coil width: max 220mm Hjdpfoxvitvex Ak Dsl coil inner diameter 200-500 mm coil outer diameter: 1100mm coil weight max 100kg

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, cutting height (max.): 300 mm, overall weight: 1,300 kg, saw band length: 3,660 mm, table length: 400 mm, in excellent condition Horizontal band saw machine AMADA CRH-300S manufacturer AMADA year of manufacture: 1975 Technical data Material: square 300x 300 mm Material: square 300 x 300 mm Max. material: round Ø 300 mm Max. machine load: 1200 kg Speed ​​27 - 95 m/min, infinitely adjustable Bimetal saw blade: 27 x 0.95 x 3660 mm Hjdpfowvvr Ijx Ak Del single-sided receiving table: 0 - 400 mm Hydraulic rack and pinion vice for stack cutting saw band motor: 2.2 kW hydraulic pump motor: 0.75 kW Machine weight approx. 1.3 t Machine dimensions approx. 1625 x 1259 x 1200 m

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length Hodpfsw Iq Ugox Ak Djl - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: good (used), functionality: fully functional, We are selling a used Amada CTB 400 (carbide-capable bandsaw) with 3m powered roller conveyor and 6m outfeed roller conveyor. Technical specifications: - Cutting capacity round: 430 mm - Cutting capacity square: 430 x 430 mm - Cut-off length: 5 - 9999 mm - Bandsaw motor power: 7.5 kW - Total power: approx. 10 kW - Saw blade dimension: 4715 x 41 x 1.3 mm (suitable for carbide) - Variable blade speed: 15 - 150 m/min - Feed length: 10 - 9999 mm - Minimum remnant length: 15 mm - Dimensions (W x D x H): 2630 x 2740 x 2422 mm Hodowybkdjpfx Ak Dsl - Weight: approx. 4500 kg CNC control: Speed / Power Material / Cross-section Parallelism display Automatic parameter correction

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 220t 4m, 8 axis Press Brake Year 2012 Tonnage 220 tonnes Max. Bend Length 4280 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Hodpfx Aov S U Izsk Djl Return Speed 1 - 100 mm/sec Oil Capacity 195L Motor Power Weight 17450 Kg Dimensions Machine Length 5070 mm Machine Depth 2075 mm Machine Height 3085 mm Distance Between Side Frames 3760mm Beam width 180 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, control type: CNC control, actuation type: electric, working width: 4,000 mm, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness steel (max.): 4 mm, input voltage: 380 V, input frequency: 50 Hz, total width: 4,300 mm, total height: 1,800 mm, number of support arms: 2, year of last overhaul: 2026, Equipment: documentation/manual, type plate available, SCHIAVI-AMADA GH540A guillotine shear, fully operational and ready for use, complete with sheet metal evacuator and programmable positioner ENC1 TASK. Hedpeyf H Uwjfx Ak Del

Condition: used, Year of construction: 1989, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 min angle adjustable from - to 15 - 150 Grad engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet Hedpfsxaa N Nex Ak Djl - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : ?machineno=1008-9397088