CO2 Laser Cutting Machine

Amada LC-2415 Alpha II/Resonator C-1500

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Ksdpfx Aegbfaxobnsdr Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Ksdpfx Abeh Akm Tsnedr

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB Kdsdpfxevvtpxo Abnsr spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler With hinged chip conveyor Chip tray Compressed air gun The machine has NO lathe chucks on sale as is! *

Condition: used, pressure 55 t throat 250 mm stroke 10-90 mm table-size 640 x 495 mm no. of strokes 120 Hub/min ram adjustment 55 mm ram surface 290 x 210 mm ram hole 40 H7 mm hole in the table 220 x 190 mm T-slots 22 clamping plate 620 x 485 x 65 mm total power requirement 4,5 kW weight of the machine ca. 3,4 t Kdodpfx Abocp Apysnsr dimensions of the machine ca. 1,5 x 1,2 x 2,2 m

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 600 mm z-travel 805 mm Control Sinumerik 840D weight of the machine ca. 13 t 1 horizontal machining centre Make: HECKERT type: CWK 500D year 2003 serial no. 16087 control, make: Siemens, type: Sinumerik 840D Kdjdpfx Asuddgfebnor travel X/Y/Z 800 x 600 x 805 mm 2-fold pallet changer pallet size 500 x 500 mm NC-rotary table 360 x 0,001° 60-fold tool changer, tool holder HSK 63 Speed max. 15,000 rpm IKZ 50 bar Operating hours 32,450 Spindle hours 6.080 Accessories: Coolant temperature control, belt filter, chip conveyor, spindle cooling, Infrared probe preparation

Year of construction: 1980, condition: used, pressure 80 t throat - mm stroke 50 mm table surface area 875 x 695 mm ram surface 350 x 355 mm ram adjustment 71 mm no. of strokes 30 - 90 Hub/min distance between columns 450 mm weight of the machine ca. 6,2 t dimensions of the machine ca. 2,0 x 2,1 x 3,2 m daylight (stroke down, ram adjustment above) 480 mm Further information: - the machine is currently being a partially overhauled - the machine was re-equipped with the following components: * separate control cabinet with touchscreen including cabling * new painting of the individual components in the dismantled state After the partial overhaul, the machine is safe for manual insertion Kdsdpfxedlcy Ho Abnor open tool, a current UVV test is carried out before delivery and braking time measurement.

Year of construction: 2014, condition: excellent (used), Machine to seal preformed doy pouch bags, was packing kiwi fruits for major UK supermarkets. Only used for a couple of seasons and in storage ever since. Video available showing this machine in production. Kjdpfx Abeifpx Tenodr

Year of construction: 2012, condition: used, For Sale: Ishida DACS-W-030-SB Checkweigher – Excellent Condition We are offering a high-quality Ishida DACS-W-030-SB Checkweigher for sale, designed for efficient and precise weight control in a variety of production environments. This checkweigher is in excellent condition, thoroughly maintained, and ready for use. Key Features: - Weighing Platform Dimensions: 530mm x 300mm - Automatic Reject System: Ensures accurate sorting and removal of out-of-spec products - Brand: Ishida – known for their reliable and durable weighing solutions Kdodev Sqxiepfx Abnjr - Model: DACS-W-030-SB – A top-of-the-line model for optimal performance - Ease of Integration: Can be easily integrated into your existing production line - Precision & Reliability: Ideal for food, pharmaceutical, or industrial applications Whether you are looking to upgrade your quality control processes or improve overall production efficiency, the Ishida DACS-W-030-SB Checkweigher offers a proven solution. For more information or to schedule a viewing, please contact us. *STC just acquired this equipment. While we currently received a lot of new stock we didn't find the time yet to do any work to it. Of-course if you are interested we can prioritize to test and inspect, to ensure you will get a 100% working condition machine. If you are interested obviously feel free to contact us so we can gather more information for you. Weighing Platform Dimensions: 530mm x 300mm

Condition: used, Year of construction: 2008, Technical details: max. workpiece diameter: 29 mm min. workpiece diameter: 26 mm workpiece length: 66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. Kdsdpfx Aslqac Sebnor *

Year of construction: 2009, condition: used, Scanvaegt RF5 Kodpfx Ajdqapdjbnsdr checkweigher serial: BMP01014 2009, stainless frame, weight range 600g - 5000g, up to 40 packs per min, max product 300mm x 220mm, total length 800mm