Used Alzstar 40 for sale (54,510)

Condition: new, functionality: fully functional, Drilling capacity in St 60 40 mm Thread cutting in St 60 M 24 Thread cutting in GG 20 M 30 Short spindle MK 3 drilling stroke 120 mm throat 293 mm column diameter 115 mm machine table - usable support 514x360 mm Hodsifkpwopfx Ah Neng T-slots number - width - distance 2 x 14 x 224 mm distance spindle-machine table min./max. 117/701 mm feed rate 0,10 + 0,20 mm/rev. spindle speeds 160-2,250 rpm Total power requirement 1.45/1.9 kW machine height 1840 mm Machine weight approx. 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right/left rotation - motor protection switch - Speed adjustment stepless - digital speed display - feed overload protection - protection class IP 54 - Connector plug (ready mounted, cable length 2 m) - Spindle protection with electrical fuse

Condition: used, Year of construction: 1999, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 125 mm spindle taper MT 3 total power requirement 1,8 kW weight of the machine ca. 250 kg dimensions of the machine ca. 1500x1000x1900 mm Equipment: - Stepless drive Hodpoxtfzksfx Ah Neng - Drilling depth stop - Extra long drill spindle - automatic feed

Condition: new, Drilling capacity in St 60 40 mm threading in St 60 M 24 mm threading in GG 20 M 30 bore stroke 120 mm Short spindle MK 3 throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm Hsdpfsgp Dyxox Ah Nsng T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle - machine table min./max. 117 / 701 mm feed 0,10 + 0,20 mm/U spindle turning speed range 160 - 2250 UpM total power requirement 1,45 / 1,9 kW height of the machine 1840 mm weight of the machine ca. 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete fitting

Condition: new, Alzmetall Alzstar 40/SV pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/SV Condition: new Hodjxd Tpwspfx Ah Neng Technical data: Column diameter: 115 mm Machine table (usable support): 514 x 360 mm T-slots (number x width x distance): 2 x 14 x 224 mm Distance spindle-table (min./max.): 117 / 701 mm 2 feeds: 0.1 + 0.2 mm/rev Height (mm): approx. 1840 Drilling capacity St 60 (mm): 40 Spindle stroke (mm): 120 Thrust (mm): 293 Motor (kW): 1.45 / 1.9 Speed range (r/min): 160 - 2250 Weight (kg): 285

Condition: new, Year of construction: 2024, == Exhibition machine == ALZMETALL column drilling machine ALZSTAR 40 SV with coolant unit B (option 25) (consisting of separate tank (33l), pump with motor protection switch, complete fitting) and LED machine light Standard equipment: Mushroom pushbutton, reversing switch (for clockwise and anticlockwise rotation), motor protection switch Infinitely variable speed adjustment, digital speed display, feed overload protection, protection class IP54, connection plug Spindle protection with electrical fuse Technical data: Drilling capacity steel E335 (St 60) 40 mm Thread cutting: Hodpfx Ahjd Hy Elo Njng Steel E335 (St 60) M 24 Cast iron EN-GJL-200 (GG20) M 30 Short spindle MK 3 Spindle stroke 120 mm Projection 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Spindle-to-table distance min./max. 117/701 mm Feed rate 0.10 + 0.20 mm/rev Machine height without options approx. 1840 mm Net weight approx. 285 kg Drive stepless Motor 1500 / 3000 rpm Power 1.45 / 1.9 kW Spindle speed 160-2250 rpm

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm feed 0.10 + 0.20 mm/U distance spindle /table 117 / 701 mm total power requirement 1.45 / 1.90 kW weight 285 kg range L-W-H 500 x 800 x 1840 mm Furnishing: - autom. Feed 0.10 + 0.20 mm / rev - stepless speed adjustment - Short spindle MK 3 - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Digital speed display - Feed overload protection - Spindle protection with electrical fuse - 2 m cable with plug 16A Hsdpfx Ahjxaakae Nsng - Operating instructions in German including special equipment: - Coolant device "B" pos. 25.

Condition: new, Alzmetall Alzstar 40/S pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/S Condition: new Hedpfx Ajxd Tpqjh Nsng Drilling capacity steel E335 (St 60) 40 mm Short spindle MK 3 Spindle stroke 120 mm Thrust 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 117/701 mm Feed manual Machine height without options approx. 1840 mm Net weight approx. 270 kg Spindle speed rpm 160-2250

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm feed 0.10 + 0.20 mm/U T-slots 2 x 14 x 224 mm distance spindle /table 117 / 701 mm engine output 1.45 / 1.90 kW weight 285 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE Hodpfxjxab Rhe Ah Nong 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black including special accessories: - 25. Coolant system B.

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) Hnodovwczyepfx Ah Njg (Prices may change with significant rate fluctuations)

Condition: excellent (used), Professional digital micrometer from the renowned brand Mahr – model Micromar 40 EWR(i) – designed for extremely precise measurements with accuracy up to 0.001 mm. The device in IP65 version is resistant to dust and water, making it ideal for applications in metrology, quality control, and industrial workshops. . Measuring range: 100 – 125 mm . Accuracy: 0.001 mm . Digital readout with large, easy-to-read LCD display . Protection rating: IP65 – resistant to dust and splashes . “ABS” and “Hold” functions – quick measurement hold and zeroing function . High-stiffness frame, ergonomic grip . Includes original box, certificate, user manual, and 100 mm calibration standard . Condition: virtually new / only used for testing Hodjxl Rgijpfx Ah Nsng

Condition: good (used), Scope of delivery includes: 01x CS profile, used Material color: Sendzimir galvanized Total length: 5,550 mm Profile dimensions: CS 250 x 50 x 40 mm Material thickness: approx. 2.5 mm Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Hnodpex R Ambofx Ah Njg Mr: Falk Deutsch General information about the item: This item is only available for collection. Should you require transportation or shipment, additional costs will apply. These can be quoted separately depending on the delivery location and scope of delivery.

Condition: excellent (used), Weishaupt RGMS 40 dual fuel burner gas+heavy oil. 2600w Hedpfx Aomnqbtjh Nsng

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Hnodew U Dt Nopfx Ah Nog Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Hohner Economy 25/40 Wire Stitcher Hnodpfxsx N I N Se Ah Nsg Very good condition. A reliable machine with legendary durability. Technical specifications: Capacity: 206 cycles/min Sewing thickness: 25mm (punching up to 40mm without closing the staple from the bottom) Wire diameter: max. 1mm Power supply: 380V Weight: 240kg The machine has an adjustable table for block and booklet stitching.

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 32,500 kg, empty load weight: 3,800 kg, total length: 12,200 mm, total width: 2,440 mm, total height: 2,600 mm, load capacity: 28,700 kg, door opening width: 2,280 mm, door opening height: 2,260 mm, inner dimension height: 2,350 mm, inner dimension length: 12,000 mm, inner dimension width: 2,330 mm, STANDARD 40 FEET CONTAINER CSC VALID MARCH 24 Hnodpork Eqvofx Ah Njg SEALING IN WORKING CONDITION 2 UNITS AVAILABLE

Condition: excellent (used), Precision workshop micrometer from renowned German manufacturer Mahr, model Marameter M, designed for highly accurate measurement of external diameters in the range of 0–40 mm. The device is in very good condition, fully functional, and stored in its original wooden protective case. Specification: • Measuring range: 0 – 40 mm Hnodpexmlgtsfx Ah Njg • Model: Marameter M • Manufacturer: Mahr (Germany) • Catalogue number: 3206064 • Application: precise measurement of external diameters / shafts / cylindrical components • Durable metal housing • Arm with interchangeable measuring tips • High measurement stability and repeatability • Comes with the original wooden case Condition: • Used, very well preserved • Last calibration: 2023 • Ready for use in a measurement room or laboratory.

Condition: good (used), Technical data for pallet rack beam: Racking system: SSI Schäfer Type: PR600 Included in delivery: 01x Pallet rack beam, used Material color: RAL 5010 gentian blue Box profile: 100 x 40 mm Beam type: TRV1-270-104-30 CE Bracket: 5 HK (hooks) Clear span: approx. 2,700 mm Max. load per pair of beams: 2,400 kg, with evenly distributed load. 02x Safety pins, used Version: completely galvanized Hnjdpfx Ahswp Dzwj Nsg For securing the crossbeams Your contacts in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for pick-up. Any desired transport or shipment of this item is associated with additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Bookbinding Press 50×40 with Base The machine is fully operational and ready for use. Format: 500×400 mm Pressure: 5 tons Hnsdpsx N D Tyjfx Ah Njg

Condition: excellent (used), Professional outside micrometer from the renowned brand Mahr, designed for precise measurements in industry, workshops, and laboratories. The device features high accuracy and robust construction, while its large LCD display enables quick and convenient readout of results. . Measuring range: 25–50 mm / 1–2” . Resolution: 0.001 mm (1 µm) . Functions: ZERO, ABS, REL, TOL . Protection class: IP65 – dust and splash resistant . Power supply: CR2032 battery (3 V) . Ergonomic, precision design made of hardened steel . Clear LCD display . Catalogue number: 4157042 . Manufacturer: Mahr GmbH – Germany Included: . Mahr Micromar 40 EWR-S digital micrometer . Calibration standard . Adjustment key . Documentation and user manual . Original carrying case Device condition: very good – fully functional and ready for operation. An excellent choice for industrial plants, precision workshops, and measurement laboratories. Hedpoxl Rf Sofx Ah Neng

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Jung Heinrich Type: Esmena The scope of delivery includes: 01x pallet racking beam, used Material color: yellow Box profile: 115 x 40 mm Agraffe: 4 hooks Clear width: 1,100 mm Hnedpfx Aetp Tb Toh Nsg 02x locking pins, used Version: completely galvanized For securing the side rails against unintentional lifting out Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), For sale: SK40 holders, tool holders, milling heads, drill chucks, and cutting tools. Condition: used, in good technical condition. Offered brands: Haimer, Wohlhaupter, Schunk, Sandvik, Iscar, Garant, Fahrion, Gewefa, WTE, Kelch, WNT, Atorn, Bahmüller, Eroglu, Holex, LLambrich, Weldon, i-tec, Zurn Germany. Available: drill chucks, face milling heads, coolant-fed holders, and many more. 🛠️ Some with cutters, drills, turning tools. Price given per holder from photos 1-2, Haimer 60€/pc. Hnjdjw Hl Sxopfx Ah Nsg

Condition: excellent (used), Technical data for the locking bracket: Manufacturer: SSI Schäfer Included in delivery: Hnsdspgndgjpfx Ah Nog 01x locking angle, used Material color: sendzimir galvanized leg ,,A" approx. 35 mm leg ,,B" approx. 53 mm (contact surface see description) incl. distance block (grey) inner dimension ,,C" approx. 22 mm material thickness: approx. 2,00 mm Weight / pcs.: approx. 0,120 kg Remark: Due to the included the Z-bracket can be used for various truss widths crosshead widths from 40 - 60 mm! Brief overview / range of application: - Without block for truss width 60 mm (e.g. for INP) - With block (small side inside) for truss width: 50 mm (INP or box profile) - With block (large side inside) for crosshead width: 40 mm (INP or box profile) General information about the article: This item is offered for pickup only. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: excellent (used), For sale: Professional turning and finishing holder with SK40 mounting, ideal for facing, finishing, and rough machining of end and flat surfaces. The high-quality tool steel construction ensures stability, rigidity, and high clamping precision. 📌 Technical data: Hodpfx Asxizb Eoh Njng • Type: Turning and finishing holder with insert • Mounting: SK40 DIN 69871 B • Dimensions: SK40 × 40 × 40 • Head diameter: Ø40 mm • Total length: approx. 60 mm • Condition: Used, very good technical condition – fully functional ✅ Advantages: • High machining accuracy and clamping rigidity • Suitable for use with indexable inserts • Designed for facing, finishing, and rough machining • Compatible with milling machines and machining centers with SK40 mounting

Condition: used, Your contact person in our home: Men: Andre Evering Mr: Marcel Brahms Mr: Simon blank specifications to the wide clamping shelf traverse: Manufacturer: Nimar Type: MI 50 Included in the scope of delivery: 01 x wide clamping rack crossbar, used Material color: grey Traverse type: MI 50 Box profile: 60 x 40 mm inside width: 2,000 mm 02 x locking pins, used Construction: fully galvanized To secure the beam against unintentional lifting Our services at a glance: (Prices on request) -Installation, construction our general conditions of erection are to be observed -Shelf testing Hnsdpfx Ahjdh Ublo Nog Shelf inspection according to DIN EN 15635 carried out to comply with the BGR 234 Visual inspection for all shelf systems -Delivery with our own fleet of vehicles (without discharge)

Condition: excellent (used), Your contact person in our home: Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer you a used pallet rack beam Nedcon manufacturer for sale to. Technical specifications of the pallet shelf traverse: Shelf system: Nedcon Type: NS Currently available: approx. 5,000 pieces included are included: 01 x pallet shelf beams, used Material color: RAL 2008 bright red orange Box profile: 90 x 40 mm Cage type: 4 hooks Clearance: 1,900 mm maximum load per pair of traverse 2,000 kg, at gleichm. distributed load 02 x locking pins, used Execution: compl. zinc-plated To secure the beam against unintentional lifting Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Hnedpjd A Sm Tjfx Ah Nsg Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without discharge)