Used Alzmetall Ac 32 for sale (127)

Condition: used, Year of construction: 2001, bore capacity in steel (diameter) 32 mm throat 322 mm Bskzsxehd0Q bore stroke 180 mm table-size 500 x 370 mm spindle taper MT 4 number of spindle speeds 55- 5000 UpM Control Software Spezial total power requirement 3 kW weight of the machine ca. 0,52 t dimensions of the machine ca. 1 x 1 x 2,35 m column type drilling machine with additional turret head ARBO 20. Machine comes with spare parts.

Year of construction: 1990, Condition: good (used), Technical data P3Im9 - Clamping surface (left-right): 370 mm - Clamping surface (front-rear): 614 mm - Control: electronic control - quill stroke: 180 mm - Speed range up to: 55 - 5000 rpm - throat: 320 mm - Tool holder: MK 4 - Connection voltage: 400 V - Total height approx.: 2.06 m - Documentation - Weight approx.: 600 kg

Condition: used, Year of construction: 2001, Technical data: Tool holder: MK 4 Drilling capacity in ST 60: ø 25 mm Drilling capacity in cast iron GG 20: ø32 mm Tapping capacity in ST 60: M24 Thread cutting capacity GG20: M30 Speed range: (12) 102 - 2000 1/min Spindle stroke: 150 mm Feed rates: 0.1 / 0.2 / 0.3 mm/rev Table size: 1175 x 525 mm Column diameter: 170 mm Motor power: 1.1 / 1.5 kW Connection: 400 V Dnmofz Weight, approx.: 2200 kg Dimensions (WxDxH), approx.: 1300 x 1620 x 2270 mm Equipment: - Machined base with T-slots - Feed device - R- L- run - Thread cutting device - Emergency stop button - Drill chuck - vice - Machine wedge shoes - Swivel machine table - Cube table - Base plate with T-slots - Machine lamp

Year of construction: 1994, Condition: ready for operation (used), Drilling capacity steel/cast iron: 32mm/40mm, spindle mount: MK4, throat depth: 322mm, quill stroke: 180mm, speed: 5000 rpm, table dimensions X/Y: 500mm/370mm, column diameter: 145mm, machine dimensions X/Y/Z: approx. 1000mm/1000mm/2350mm, weight: approx. 520kg. C0Ms2Uklu8

Condition: ready for operation (used), machine/vehicle number: 520, Small hole in the housing, otherwise ready for use Bhsqkr3Embu

Year of construction: 1991, Condition: good (used), Technical data - Clamping surface (left-right): 390 mm - Clamping surface (front-rear): 420 mm - Control: electronic control B3Qy3Wxxp8 - quill stroke: 120 mm - Speed range up to: 7500 rpm - Tool holder: MK 3 - Connection voltage: 400 V - Mains frequency: 50 Hz - Total height approx.: 1.90 m - Documentation - Weight approx.: 400 kg

Condition: excellent (used), Year of construction: 2006, We are selling a reliable ALZRAPID 32 in good condition. The machine is ready for demonstration under power and available at short notice. Please refer to the following description for the technical data: Technical data: Spindle speeds: 102/152/204/250/304/408/ 500/608/816 /1000/ 1216/2000 Dq2Ygf Short spindle: MK4 Drilling capacity steel E 335 (St 60) *1): 32 mm Drilling capacity cast iron EN-GJL-200 (GG 20): 32 mm Motor: 1500/3000 rpm Accessories: - Digital display with glass scales - Drill chuck (see picture) - Thread cutting - R 0 L - setting - Adjustable feet - Documentation and operating instructions

Condition: good (used), Year of construction: 1998, CNC MACHINING CENTER ALZMETALL BAZ 15, Year of manufacture: 1998 Technical specifications: X: 600 mm Y: 400 mm Z: 600 mm Table: 750 x 450 mm Main spindle: 10,000 RPM Drid3V Control: Siemens Sinumerik

Condition: good (used), Alzmetall AB4SJ Machine No. 12333 Infinitely variable speed with 2 gear stages Maximum drilling capacity in steel: 40 mm Spindle mount: MT 4 Spindle speeds: 65-1200 rpm Maximum quill stroke: 150 mm Cc3Eoniexs Feed rates: 0.09 / 0.16 / 0.28 mm/rev Table diameter: 560 mm Equipment: - Thread cutting device - Automatic feed - Machine light - Drill chuck Price net, ex works

Condition: ready for operation (used), Year of construction: 2003, operating hours: 91,471 h, General Data Measurements width 3000mm Measurements depth 4800mm Measurements height 3000mm Machine weight 8000 kg Control Unit Brand HEIDENHAIN Model 426 Drhg8N Main Drive Spindle speed range 9000 rpm Media Internal cooling Yes Additional Equipment Tool magazine: 24 places / drum magazine Tool cooling: External / internal cooling 4th axis is not included This 3-axis Alzmetall BAZ 26 vertical machining center was manufactured in 2003. Ideal for precision machining tasks, it offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the Alzmetall BAZ 26 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: PRJ037887, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, table width: 750 mm, rotational speed (max.): 13,000 rpm, distance table to spindle center: 740 mm, number of slots in tool magazine: 24, No reserve price - guaranteed sale at the highest bid! Machining center including dividing head TECHNICAL DETAILS X-axis (longitudinal stroke): 600 mm Y-axis (transverse stroke): 400 mm Z-axis (vertical stroke): 600 mm Distance spindle-table (min./max.): 140/740 mm (with spacer, item special option 2) Control: Heidenhain iTNC 530 with smarT.NC Machine table Table width: 750 mm T-slots according to DIN 650 (width/distance): 14 x 80 / 100 mm Middle T-slot as guide slot: 14 H7 mm Table load: max. 500 kg Main spindle drive Spindle type: Conventional main spindle with 4-way fixed-loose bearing and lifetime grease lubrication Bearing seal: Sealing air seal with additional splash ring Tool holder: SK 40 (according to DIN 69871) Pull bolt: DIN 69872-19 Blown air through the spindle center: available Spindle drive motor Type: 4-pole, frequency-controlled three-phase asynchronous motor with external air cooling (maintenance-free) Drive power (25% duty cycle): max. 13 kW Torque (25% duty cycle): max. 55 Nm Speed range continuously variable (25% duty cycle): max. 13,000 rpm Tool magazine Magazine type: plate Magazine positions: 24 Tool diameter (fully loaded): max. 100 mm Tool diameter (with free adjacent positions): max. 200 mm Tool length (at Ø 25): max. 350 mm Tool weight: max. 4 kg Tool change time: approx. 1.9 s Chip-to-chip time: approx. 3.9 s MACHINE DETAILS Air pressure: min. 6 bar Hydraulics: max. 6.8 l/min at 140 bar Connection power: 20 kVA Width: approx. 2,700 mm Depth: approx. 1,780 mm Height: approx. 2,785 mm Machine as transport unit: approx. 3,500 kg Cewwiv98Mk EQUIPMENT - Chip conveyor - Coolant -

Condition: used, Year of construction: 1972, bore capacity in steel (diameter) 40 mm throat 340 mm bore stroke 170 mm Drh722 table surface area 560 mm

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm table rotating: 360 ° Bru9Vaqv drill table adjustment: 600 vertical mm column diameter: Ø 130 mm total power requirement: 7,5 kW weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height. *

Condition: ready for operation (used), Year of construction: 1989, Functionality: unexamined, machine/vehicle number: 1441, spindle speed (max.): 3,000 rpm, spindle speed (min.): 200 rpm, total height: 1,500 mm, total width: 560 mm, total length: 800 mm, table width: 240 mm, table length: 250 mm, overall weight: 250 kg, With 2 grooves, including frequency converter for stepless speed use. Drgfvd

Condition: excellent (used), Year of construction: 1988, Alzmetall AB 30/R-1000 radial drilling machine with 3,0 kW motor Manufacturer: Alzmetall Type: AB 30/R-1000 Condition: used, very good Year of manufacture: 1988 Drilling capacity steel E335 (St 60) 40 mm Drilling capacity cast iron EN-GJL-200 50 mm Thread cutting (St60)* M 30 Thread cutting in cast iron (EN-GJL-200)* M 42 Short spindle MK 4 / MT 4 Stroke motor 0.75 kW 4 feeds 0.15-0.2-0.3-0.36 mm/rev Spindle stroke 160 mm* throat 1000 mm Drive Manual gearbox Motor: n = 1500 min-1 3.0 kw kW 12 Spindle speeds 56 / 80 / 112 / 160 / 224 315 / 450 / 630 / 900 / 1250 / 1800 / 2500 Standard equipment - Electromagnetic feed clutch with overload protection and electric handle cross switching - Clockwise rotation through contactor control - incl. motor protection switch for drive and lift motor - Base plate with T-slots - Protection class IP 54 Special equipment. - Machine light - Thread cutting device - Coolant system - Electrically controlled free-cutting device B8Tzgrbgpq - Drilling depth fine adjustment and fixed stop - 2 x cube table 630 x 800 x 500 - Central clamping for drilling slide and boom mechanical and for column pneumatic

Condition: used, Year of construction: 1956, bore capacity in steel (diameter) 50 mm throat 385 mm bore stroke 240 mm table surface area ø 500 mm spindle taper MT 5 spindle turning speed range 40 - 800 U/min feeds 0,1/0,14/0,2/0,28/0,4 mm/U column diameter 220 mm distance between table/spindle max. 670 mm distance spindle/base plate 1180 mm Eru7Hwkp8 total power requirement 4 kW weight of the machine ca. 1,4 t dimensions of machine L x W x H 1,5 x 0,75 x 2,4 m Accessories: drill chuck, coolant

Condition: excellent (used), Year of construction: 2021, operating hours: 5,650 h, Functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, controller manufacturer: Heidenhain, controller model: TNC640, spindle speed (max.): 18,000 rpm, coolant supply: 50 bar, Highly dynamic 5-axis machining center with extensive equipment Pallet changer Indunorm UL300/ 2 pallet sizes possible Serviced Current switch-on times: Program ON: 5,649h / Spindle ON: 5,272h Dqwdkl Travel paths and speeds: X-axis (longitudinal): 660 mm Y-axis (transverse): 800 mm Z-axis (vertical): 550 mm A-axis with double Tourque drive: +140°/-140° C-axis with Tourque drive: 360° / resolution 0.0001 C-axis speed: 50 rpm Feed rate in all axes: 75,000 mm/min Clamping table: Dimensions: DM470 mm with attached zero point system type Parotec: 356 mm x 356 mm Table load: 500 kg Control: Heidenhain TNC640 Spindle: Speed range: 50 – 18,000 rpm Tool holder: HSK63 Spindle power: 26 kW (S6) Torque: 116 Nm (S6) Coolant system and chip disposal: Coolant outside with 3 nozzles: 7 bar Coolant inside: 50 bar Air outside Air inside Paper belt filter Chip conveyor Bed flushing Automatic tool changer: Tool holder: HSK63 Number of places: 76 with 2 levels Dimensions and weight: (without automation) Dimensions: width 3,900 mm x depth 4,200 mm x height 3,200 mm Weight: 11,000 kg Indunorm automation system: Automatic displacement axis to allow free access to the machine Pallet size 1 for automation: 6 pieces 398 mm x 398 mm Preset pallet for Erowa ITS: 1 piece 398 mm x 398 mm Pallet size 2 for automation: (selectable) 16 pieces Erowa ITS148 mm Pallet size 3 for automation: (alternatively selectable) 32 pieces Erowa ITS50 mm Transfer weight including pallet: 300 kg Crane loading possible Other equipment and accessories: Electrical handwheel HR510 Kinenatic Opt 5-axis compensation Heidenhain infrared sensor TS640 Preparation for oil mist extraction Blum tool measurement with laser Work area flushing Interior camera UYAR including screen Hand flushing gun Automatic roof section for crane loading 6 pieces Parotec pallets 398 mm x 398 mm 1 piece Pre-Palette Parotec for Erowa ITS 398 mm x 398 mm Machine documentation

Condition: new, ALZMETALL column drilling machine Alzstar 23 S Manufacturer: Alzmetall Type: Alzstar 23 S Condition: NEW Drilling capacity steel E335 (St 60) 23 mm Thread cutting Steel E335 (St 60) M 14 Cast EN-GJL-200 (GG20) M 16 Short spindle MK 2 Spindle stroke 100 mm Drgcxl Thrust 250 mm Column diameter 90 mm Machine table, usable support 370 x 300 mm T-slots, number x width x distance 2 x 14 x 160 mm Distance spindle-table min./max. 140/670 mm Hand feed Machine height without options approx. 1770 mm Net weight approx. 175 kg Drive stepless Motor 750 / 1500 rpm Power 0.6 / 0.95 kW Spindle speed rpm 225-4300 Standard equipment: Mushroom push button (latching) for EMERGENCY STOP Reversing switch for clockwise and counterclockwise rotation Motor protection switch Stepless speed adjustment Digital speed display Protection class IP 54 Connection plug (fully assembled, cable length 2m) Spindle protection with electrical fuse Paint: DD structural paint light gray RAL 7035, anthracite RAL 7016

Condition: as good as new (ex-display), Year of construction: 2025, Functionality: fully functional, ALZMETALL AX 4 / SV pillar drilling machine 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: NEW Year of manufacture: 2025 Drilling capacity steel E335 (St 60) 55 mm Thread cutting B8Txk7Wbo3 Steel E335 (St 60) M 42 Cast EN-GJL-200 M 56 Short spindle MK 4 Spindle stroke 140 mm Usable projection 300 mm Column diameter 145 mm Machine table, usable support 615 x 430 mm Distance spindle-table min./max. 150/735 mm T-slots, number x width x distance 2 x 14 x 224 mm Feed 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Drive stepless Motor 1500 rpm Power 3.0 kW Spindle speed rpm 70-2400 Standard equipment: Main switch with motor protection switch, lockable Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Speed display digital Feed overload protection Protection class IP 54 Spindle protection with electrical protection Paint: DD structural paint signal white RAL 9003, PANTONE 7545c, black Machine oil: initial filling; Container supplied loose Available options: - LED machine light - Thread cutting device with soft start (from 2025) - Coolant device in the base - Digital drilling depth display - Drilling depth fine adjustment 0.1 mm

Condition: new, Alzmetall Alzstar 40/SV pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/SV Drgcwx Condition: new Technical data: Column diameter: 115 mm Machine table (usable support): 514 x 360 mm T-slots (number x width x distance): 2 x 14 x 224 mm Distance spindle-table (min./max.): 117 / 701 mm 2 feeds: 0.1 + 0.2 mm/rev Height (mm): approx. 1840 Drilling capacity St 60 (mm): 40 Spindle stroke (mm): 120 Thrust (mm): 293 Motor (kW): 1.45 / 1.9 Speed range (r/min): 160 - 2250 Weight (kg): 285

Condition: new, Functionality: fully functional, Equipment: lighting, Alzmetall AB 40 iTRONIC 70-4000rpm pillar drill Condition: new Drilling capacity steel E335 (ST 60): 50 mm Thread cutting steel: E335 (ST 60): M 30 Spindle mount: MK 4 Spindle stroke: 160 mm Throw: 300 mm Column diameter: 145 mm Spindle speed L rpm: 70 – 4,000 Power: 1.8 / 2.9 KW Equipment: 7" TFT - LCD display with touch function Thread cutting device Infinitely variable speed setting Automatic speed control Spindle protection Three separate buttons for clockwise - counterclockwise - stop Mushroom push button Main switch Clockwise and counterclockwise rotation B8Twneao8S Control voltage 24 volts Protection class IP 54 Motor insulation class "F" (155°) Painting Electromagnetic feed overload protection Machine oil initial filling Equipment options: - Alzmetall option no. 12 LED machine light - Alzmetall option no. 20.4 Comfort grip switch - Alzmetall option no. 20.5 Foot switch - Alzmetall option no. 24 Coolant device A - Alzmetall option no. 37.3 Automatic drilling depth control - Alzmetall option no. 37.5 Technology computer - Alzmetall option no. 37.6 Maximum drilling depth display - Alzmetall option no. 38.1 Automatic spindle stop - Alzmetall option no. 38.2 Workpiece counter / spindle hour counter - Alzmetall option no. 50.6 Drilling depth fine adjustment 0.1mm

Condition: new, Alzmetall Alzstar 30/s pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 30/S Condition: new Drilling capacity steel E335 (St 60) 30 mm Thread cutting Steel E335 (St 60) M 16 Cast EN-GJL-200 (GG20) M 20 Short spindle MK 3 Spindle stroke 140 mm Thrust 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 132/724 mm B8Tvpkk3Oi Feed manual Machine height without options approx. 1770 mm Net weight approx. 260 kg Drive continuously variable Motor 750 / 1500 rpm 750 / 1500 rpm Power 1.0 / 1.6 kW 1.0 / 1.6 kW Spindle speed rpm 225-4300

Condition: new, ALZMETALL AX3/SV pillar drilling machine NEW Manufacturer: Alzmetall Type: AX3 SV Condition: New Drilling capacity steel 40 mm Thread cutting steel M24 Cast M30 Short spindle MK 3 Spindle stroke 120 mm Usable projection 293 mm Column diameter 115 mm Machine table 515 x 360 mm Distance spindle-table 117/701 mm T-slots 2 x 14 x 224 mm Feed 0.1 + 0.2 mm/rev Machine height approx. 1840 mm Net weight approx. 270 kg Drive continuously variable Motor 750/ 1500 rpm Power 1.0 / 1.6 kW Spindle speed rpm 80-1125 Additional equipment: - Reversing switch - Machine light LED Drgcvp - Thread cutting device - Coolant device B Available immediately from stock

Condition: like new (used), Year of construction: 2017, Functionality: fully functional, ALZMETALL AX 3/SV pillar drilling machine (2017) Manufacturer: Alzmetall Type: AX 3/SV pillar drilling machine Year of manufacture: 2017 Condition: used Drilling capacity 40 mm Short spindle MK 3 Spindle stroke 120 mm Usable projection 293 mm Column diameter 115 mm Machine table 515 x 360 mm Distance spindle-table 117/701 mm T-slots 2 x 14 x 224 mm Feed 0.1 + 0.2 mm/rev Machine height 1840 mm Net weight approx. 270 kg Drive continuously variable Spindle speed rpm 160-1125 rpm Standard equipment Main switch with motor protection switch, lockable Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Digital speed display Protection class IP 54 Spindle protection with electrical fuse Special options: – Digital drilling depth display B8Tsv7Ke7K – Combination drilling table Scope of delivery: – Documentation – Drill chuck

Condition: new, As a machine dealer in Offenburg, we have new and used ALZMETALL table drilling machines and column drilling machines in our range. You can find an overview of the drilling machines on our homepage. If you have any questions, just call us. Here we offer the new series of ALZMETALL pillar drilling machines with TOUCH display: ALZMETALL AX3 iTRONIC-V pillar drilling machine Condition: NEW Standard equipment 7“ TFT - LCD display with touch function: - Manual input of spindle speed setpoint - Speed display actual value - Integrated drilling depth display with touch zero point transfer - Virtual drilling depth scale in the display - Machine status displays and warnings in the display - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Continuous speed setting using adjustment lever - Spindle protection with electrical protection - Three separate buttons for clockwise rotation - anti-clockwise rotation - stop - Mushroom push button (latching) for EMERGENCY STOP - Lockable main switch - Clockwise and anti-clockwise rotation via contactor control - Control voltage 24 volts - Protection class IP 54 - Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black Technical data: Manufacturer: ALZMETALL Type: AX 3 iTronic-V Drilling capacity steel E 335 (St 60) (mm): 40 Thread cutting steel E 335 (St 60): M 24 Thread cutting cast iron EN-GJL-200 (GG 20): M 30 Short spindle: MK 3 Spindle stroke (mm): 120 Usable projection (mm): 293 Column diameter (mm): 115 Machine table (mm): 515 x 360 T-slots (mm): 2 x 14 x 224 Distance spindle-table (mm): 117 / 701 Drgcvf Feed: 0.1 + 0.2 mm/rev Machine height (mm): approx. 1840 Drive: stepless Speed range (r/min): 160 - 2250 Motor (kW): 1.45 / 1.9 Weight (kg): approx. 270 Special equipment included: - Foot switch in addition to the thread cutting device Other options can be retrofitted: - LED machine light - Coolant system B - Technology calculator in the display - Maximum drilling depth display Optional accessories: - Machine vice size 3/125mm BB type BON3 - Machine vice size 4/160mm BB type BON4 - Keyless drill chuck Supra 1-13mm or 3-16mm MK3 Available at short notice. For self-collection. Forklift available. Shipping also possible Subject to errors, changes and prior sale. Not the right machine? Then please contact us.