Used Alzstar 18 T S for sale (44,472)

Condition: new, bore capacity in steel (diameter) 18.0 mm throat 190 mm bore stroke 80 mm morse taper 2 Kurzspindel MK turning speeds 225 - 4.300 U/min Ijdpfsxaay Uox Adnea voltage 400 / 50 Hz Volt table: 300 x 240 mm column diameter 65 mm engine output 0.37 / 0.55 kW weight 110 kg Furnishing: - Large spindle speed range - stepless speed adjustment - machined base plate - Electrically secured spindle protection - Main switch lockable with motor protection switch - Reversing switch for clockwise and counterclockwise rotation - Operating instructions in German

Condition: new, ALZMETALL Alzstar 18-T/S, Manufacturer. Alzmetall Type: Alzstar 18-T/S Condition: New Drilling capacity in St 60: 18 mm, Thread cutting in St 60: M 12, Thread cutting in GG 20: M 14, Short spindle: MK 2, Spindle speed: 225-4,300 rpm, Spindle stroke: 80 mm, Throw: 190 mm, Column diameter: 65 mm, Machine table - usable support: 300x240 mm, T-slots number - width - distance: 2 x 12 x 80 mm, Distance spindle-machine table min./max.: 75/357 mm, Machine base plate usable support: 300x240 mm, T-slots number - width - distance: 2 x 12 x 80 mm, Distance Spindle base plate min./max.: 437/437 mm, Feed by hand, Machine table height adjustment: hand crank, Total power requirement: 0.37/0.55 kW, Machine height: 840 mm, Weight: 110 kg Standard equipment: Main switch with motor protection switch, lockable Reversing switch for clockwise and counterclockwise rotation Infinitely variable speed adjustment Protection class IP 54 Mushroom push button (latching) for EMERGENCY STOP Spindle protection with electrical protection Optional: - LED machine light - Under table Iedpfx Adoxd Trrjnja - Drill chuck 1-13 or 3-16 Available now. For self-collection. Forklift available. Shipping also possible Subject to errors, changes and prior sale. Other Alzmetall table drilling machines and pillar drilling machines always in stock!

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature test chamber Control system: - 32 bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface Iedsu U Ixmopfx Adnea - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), CTS Type: T-70/600/S Temperature test chamber water-cooled Refrigerant: Converted to R-452A Control: - 32 bit controller - LCD control panel - Digital display of setpoints and actual values - Numerical input of setpoints - Error messages in plain text Ijdevitmdopfx Adnea - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, warranty duration: 18 months, input voltage: 240 V, measuring range X-axis: 250 mm, measuring range Z-axis: 320 mm, overall weight: 100 kg, feed length X-axis: 250 mm, feed length Z-axis: 320 mm, Equipment: type plate available, Modular extensible base basic Contour measuring system with down-direction Z-Scanning Anytime optionally via software updatable functions: - Up down measurement - Roughness measurement - Motorized Y-Supporting table - QR-Code Scanner (for tracingarms and reference files) Ijdpfx Aexgqlhodnoa - data export to QS-Stat (dfq file) - dominant waveness Scope of supply: - Basic mechanics with integrated Y-adjustment table (17mm way) - Integrated control system - ConturoMatic Software; manual - PC W11/64Bit; 24"TFT flat screen; - Protective cover, sturdy and water repellent (material), Commodity-Code 63079098 Technical data: Measuring range 250mm Measuring range 320mm Resolution 1nm Sensing system optically incremental Inaccuracy +/-(0,9µm+L/100)µm* [L=mm] Measuring speed 0,1-3mm/s self-optimizing Positioning speed up to 25mm/s Gauging force regulation Table load 35kg Granite precision guides Weight 95kg

Year of construction: 2014, condition: ready for operation (used), A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible. Isdpfowfg E Dex Adnea

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, measuring range X-axis: 254 mm, measuring range Y-axis: 152 mm, measuring range Z-axis: 100 mm, workpiece weight (max.): 45 kg, feed length X-axis: 254 mm, feed length Y-axis: 152 mm, feed length Z-axis: 100 mm, travel distance X-axis: 254 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 100 mm, input frequency: 50 Hz, For Sale: S-T Industries Profile Projector 22-2600 – 30" Screen, 5X Magnification | Precision Optical Comparator Now available at Used Machine Tools Ireland Ltd – a high-precision S-T Industries Profile Projector, Model 22-2600, with a large 30" (760mm) viewing screen, Heidenhain Quadra-chek 100 Control and 5X magnification lens, ideal for dimensional inspection in precision manufacturing. Previously used in a medical device company, this optical comparator is in very good condition and has been maintained to the highest standards. S-T Industries Profile Projector 22-2600 | 30" Screen | 5X Magnification | Very Good Condition 🔧 Manufacturer: S-T Industries 📍 Location: Ireland 📅 Model: 22-2600 🧰 Condition: Very good – ex-medical device company 📦 Available: Immediately 🛠️ Technical Specifications: Brand: S-T Industries Model Number: 22-2600 Control: Heidenhain Quadra-Chek 100 Screen Size: 30" (760mm) diameter Magnification Lens: 5X Worktable Travel (X-Y): 10" x 6" (254mm x 152mm) Glass Stage Plate: 12" x 8" (305mm x 203mm) Load Capacity: Approx. 45 kg (100 lbs) Screen Rotation: 360° with digital readout Illumination: Surface (Oblique) Illumination – Halogen Profile Illumination – Collimated light with adjustable brightness Focus Travel (Z-Axis): 4" (100mm) Power Supply: 230V / 50Hz Condition: Very good – ex-medical device company Country of Origin: USA Location: Ireland 🧭 Ideal For: Medical device manufacturing Aerospace & precision engineering Tool & die inspection Quality control and dimensional inspection labs Iedpfxsw Nygne Adnoa S-T Industries Profile Projector for sale Used optical comparator Ireland 30" screen profile projector Precision measuring equipment Dimensional inspection projector 22-2600 comparator S-T Industries 5X magnification projector Used metrology equipment

Condition: ready for operation (used), T&S ConturoMatic T2 Contour Measuring Device Isdewak Nvspfx Adnea Optical-incremental measuring system Measuring speed 0.1...3.0 mm/s Positioning speed up to 25 mm/s Measuring point spacing 0.5...25 µm Accuracy ±(0.9+L(mm)/100) µm Radius accuracy ±0.005% of the nominal value at R 12.5 mm Distance accuracy ±(1.2+L(mm)/100) µm Angle accuracy ≤ 30'' Technical data has been adopted. You are welcome to visit us for a viewing. We would be happy to arrange a cost-effective shipping service for you. You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: good (used), Static Mixer, Disposable Mixer, Plastic Spiral Mixer Ijdpfju Aiftox Adnsa -Manufacturer: tsi, Static mixer SULZER QUADRO MGQ 10-19D 15 pieces -Version with Luer-Lock attachment for dispensing needles -Industrial standard connection can also be used for other cartridge systems -Thread: MGQ Series 7/8" - 9 UNC coarse thread -Quantity: 3 bags with 15 pieces each available -Distribution/Price: per bag, minimum order 2 bags -Bag dimensions: 190/130/H40 mm -Weight: 0.2 kg/bag

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: EcoPurge30, pneumatic purging pump for 2K-metering pump max. flow: 6l/min max. pressure: 21MPa Ijdpfxspz H Hqe Adnea pressure ratio: 30:1

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, measuring range X-axis: 254 mm, measuring range Y-axis: 152 mm, measuring range Z-axis: 100 mm, workpiece weight (max.): 45 kg, feed length X-axis: 254 mm, feed length Y-axis: 152 mm, feed length Z-axis: 100 mm, travel distance X-axis: 254 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 100 mm, input frequency: 50 Hz, For Sale: S-T Industries Profile Projector 22-2600 – 30" Screen, 5X Magnification | Precision Optical Comparator Now available at Used Machine Tools Ireland Ltd – a high-precision S-T Industries Profile Projector, Model 22-2600, with a large 30" (760mm) viewing screen, Heidenhain Quadra-chek 100 Control and 5X magnification lens, ideal for dimensional inspection in precision manufacturing. Previously used in a medical device company, this optical comparator is in very good condition and has been maintained to the highest standards. S-T Industries Profile Projector 22-2600 | 30" Screen | 5X Magnification | Very Good Condition 🔧 Manufacturer: S-T Industries 📍 Location: Ireland 📅 Model: 22-2600 🧰 Condition: Very good – ex-medical device company 📦 Available: Immediately 🛠️ Technical Specifications: Brand: S-T Industries Model Number: 22-2600 Control: Heidenhain Quadra-Chek 100 Screen Size: 30" (760mm) diameter Magnification Lens: 5X Worktable Travel (X-Y): 10" x 6" (254mm x 152mm) Glass Stage Plate: 12" x 8" (305mm x 203mm) Load Capacity: Approx. 45 kg (100 lbs) Screen Rotation: 360° with digital readout Illumination: Surface (Oblique) Illumination – Halogen Profile Illumination – Collimated light with adjustable brightness Focus Travel (Z-Axis): 4" (100mm) Power Supply: 230V / 50Hz Condition: Very good – ex-medical device company Country of Origin: USA Location: Ireland 🧭 Ideal For: Medical device manufacturing Aerospace & precision engineering Tool & die inspection Iedjw Nyfwjpfx Adnea Quality control and dimensional inspection labs S-T Industries Profile Projector for sale Used optical comparator Ireland 30" screen profile projector Precision measuring equipment Dimensional inspection projector 22-2600 comparator S-T Industries 5X magnification projector Used metrology equipment

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Ijded Ih H Njpfx Adnsa Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file

Condition: new, R. & S. Keller Control panel Sinumerik 820 T , unused, 100% functional Isdpfx Aoi Ecl Isdnsa

Condition: new, R. & S. Keller Control panel Sinumerik 820 T , unused, in opened original packaging, 100% functional Iodpsi Ecl Sefx Adnea

Condition: excellent (used), Year of construction: 2014, ARBURG A 1500 T 1600-400 rotary table (29.279 h) (S&P 3786) Manufacture year: 2014 Operating hours: 29,379 Stunden Screw: 35 mm Injection pressure: 2500 bar Isdpfx Aoxzfv Rjdnsa Stroke volume: 154 cm³ Clamping Force: 150 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4600 x 1900 x 2300 mm Eeight: 11000 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 4 x Corepuller, Airvalve, Interface Colorizing, Interface Robot etc... Price: on request contact: Mr. Ralf Schulz

Condition: used, Year of construction: 2000, Technical details: bore capacity in steel (diameter): 18 mm throat: 250 mm bore stroke: 100 mm bore capacity in cast iron: Ø 23 mm Distance spindle/table max.: 75 / 400 mm range of revolution per miute: 225 - 4.300 / 2x 8 step U/min spindle taper MT: MK 2 feed:: von Hand mm/U table surface area: 250 x 250 mm vertical adjustment: 325 mm table clamping surface LxW: 250 x 250 mm table rotating: 360 ° base plate surface area: 320 x 250 mm Ijdju R Uncjpfx Adnja distance spindle center to floor plate:: 565 mm column diameter: 90 mm total power requirement: 0,55 kW machine weight ab.: 160 kg dimensions L x W x H: 0,9 x 0,6 x 1,1 m High-performance drilling machine Thread cutting in steel possible up to M 10 and cast iron up to M 14 equipped with Röhm 3 -16 mm quick-action chuck Operation via control panel / foot switch *

Condition: used, axle configuration: 2 axles, first registration: 10/1991, Container semi-trailer Langendorf type SA, FG 18 - 28, in very good condition and very little used, Ijdpfjxpz U Esx Adnoa

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-200-73-1332, total length: 11,640 mm, type of input current: three-phase, input voltage: 400 V, working height: 950 mm, input frequency: 50 Hz, Equipment: CE marking, NEW PRICE ONLY €185,000!!! Price valid only until October 30, 2025! Don’t miss the opportunity! We invite you to purchase the HOMAG EDGETEQ S-500 edgebander, manufactured in 2021 and delivered to our site. The edgebander was operated for exactly 3 years—from April 2021 to April 2024—in single-shift operation. It has approximately 5,000 operating hours, which for a machine of this class is equivalent to the typical annual use in a professional production facility. The edgebander is in excellent condition and requires only cleaning and routine minor servicing. Single-sided edgebanders for narrow panels, such as the EDGETEQ S-500, provide precise edge banding and flawless edge finishing. Options for PUR adhesive application and airTec technology are available on request. Adjustable feed speeds of 16–20, 25, or 30 m/min allow performance to be matched to the needs of small, medium, or high-capacity production sites. Automation and additional functional upgrades for these models can be configured to individual requirements. The offered machine was purchased from HOMAG in 2021. Its condition can be described as perfect. In the industry, neither the model nor the HOMAG brand needs introduction—they are recognized globally as leaders in the manufacture of advanced, high-quality equipment. This model is highly professional and a perfect complement for any large or modern production facility. Our machine is comprehensively equipped and includes virtually all options. Currently, a new EDGETEQ S-500 with this specification costs €284,959 net (PLN 1,210,000 net). All manuals and technical documentation are included. We maintain support from HOMAG in case installation and commissioning are required for the new owner. In our opinion, the discount offered—over 30% off the new price, amounting to approximately €84,705 net (PLN 360,000 net)—more than covers transportation and commissioning costs through HOMAG, and still results in savings of over €70,000 net (approx. PLN 300,000 net), which could be invested in another production machine. Furthermore, there is no need for the 6-month lead time typical for a new machine: this edgebander can be in your facility less than a week after purchase. General notes regarding this sale: • Although the machine is almost new and was manufactured in 2021, no warranty or guarantee is provided. • No returns will be accepted. • The listed price is exclusive of VAT (23% for buyers in Poland) which will be added to the invoice—please check the ad for price details; • Single owner. General note: We are not a furniture, manufacturing, or machinery trading company. We own numerous properties in Poland and are a developer building houses and apartments in Warsaw. The machines listed in this offer are our property. We acquired them as settlements from tenants operating in the furniture industry. We know their histories and conditions, which are as described. We are in contact with the manufacturers for further support (HOMAG, OMC, and FANUM). Since we do not need these machines, our prices are very attractive, especially given that the machines are virtually new. We can assist with transportation anywhere in Poland or the EU. Inspections prior to purchase are welcomed. Iedpfx Adjw E Npfonja

Condition: new, Alzmetall Alzstar 40/S pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/S Condition: new Drilling capacity steel E335 (St 60) 40 mm Isdexd Tpqepfx Adnja Short spindle MK 3 Spindle stroke 120 mm Thrust 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 117/701 mm Feed manual Machine height without options approx. 1840 mm Net weight approx. 270 kg Spindle speed rpm 160-2250

Condition: used, Year of construction: 2009, Perfect binding line Müller Martini Corona C15 S/35 (18") Year: 2009 Consisting of Gathering machine Müller Martini 3681 Description: - Chain tensioning station - Number of gathering stations: 12 - ASIR Automatic Signature Image Recognition: III - ASAC automatic self adjusting calliper - Stream feeders: 3738 - 10x (yr 08 06 & 03) - Bundle clamp: Gramatec CL 200 (yr 23) - Bundle clamp: Gramatec CL 200 (yr 23) - Gantry system: Pfaff (yr 23) - Pump - Set up element: 3641 - Reject gate for incomplete products: 3714 - Intermediate element with vibrating: 3643 - 2x - Transfer into the binder Perfect binder Müller Martini Corona C15 S/35 (18") Year: 2009 Description: - Semi automatic setting - Commander with touch screen - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system Ijdpfx Adoxdx Tnenja - Base for 1st spine glue system - 1st hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - Base for 2nd spine glue system - 2nd hotmelt spine glue unit, interchangeable - 2nd premelter for spine glue unit: ICS C160 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: CLS 30 - Stream cover feeder - Scoring station - Pump - Nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Escape delivery Three knife trimmer Müller Martini Zenith S (3672) Description: - Colour monitor with touchscreen - Semi automatic setting - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 - 17 Book stacker Müller Martini CB 16 (3631) Description: - Compensating stacker - Delivery to the left and right

Condition: new, bore capacity in steel (diameter) 23.0 mm throat 250 mm bore stroke 100 mm morse taper 2 MK table: 370 x 300 mm turning speeds 225 - 4300 U/min column diameter 90.0 mm distance spindle /table 140 / 670 mm engine output 0.6 / 0.95 kW weight 175 kg Machine height 1770 mm Iodpfx Asxabwzjdnja Furnishing : - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Motor protection switch - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Connection plug (fully assembled, cable length 2m) - Spindle protection with electrical fuse - Painting: DD textured paint, light gray RAL 7035, anthracite RAL 7016

Condition: new, ALZMETALL pillar drilling machine drilling capacity in steel 30mm Short spindle MK3, spindle stroke: 140mm, throat: 293mm, column diameter: 115mm, machine table usable support: 514x360mm, with T-slots 2 x 14mm x 224mm, distance spindle-table min./max. 132/724mm, machine table height adjustment by hand crank, feed by hand, machine height without options: 1790mm, net weight: 260 kg. - Speed infinitely variable 100-1800 rpm Standard equipment: Mushroom pushbutton (latching) for EMERGENCY STOP, Ijdpjid I Ixefx Adnja reversing switch for clockwise and anti-clockwise rotation, motor protection switch, speed adjustment stepless, speed display digital, protection class IP54, spindle protection with electrical fuse, painting: DD-structure paint signal white RAL 9003, PANTONE 7545c, black incl. the following options: LED machine light pos. 12. Delivery time: ex stock Waiblingen Beinstein

Condition: new, bore capacity in steel (diameter) 30.0 mm throat 293 mm bore stroke 140 mm morse taper 3 MK table: 515 x 360 mm turning speeds 225 - 4300 U/min Ijdpfxexaa Ufe Adnja engine output 1.0 / 1.6 kW column diameter 115 mm distance spindle /table 132 / 724 mm weight 260 kg Machine height 1790 mm Features: - Lockable main switch - Mushroom push button for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Motor with thermal protection contact - Stepless speed adjustment - Digital speed display - Protection class IP 54 - Motor insulation class “F” (155°) - Connection cable (without plug, cable length 2 m) - Spindle guard with electrical protection - DD textured paint finish in signal white RAL9003, PANTONE 7545c, black

Condition: like new (used), Year of construction: 2013, operating hours: 34 h, load capacity: 1,800 kg, fuel type: electric, Manufacturer + model:LINDE T 18 * EX * Pyroban - 3G / Zone 2 - RAVAS system ID:24032.0261 Cat.:Demo Iedpfxoxz T Afo Adnsa Forks:1150 x 685 mm Capacity:1800 kg Year:2014 Hours:34 hours Capacity:24 v / 230 ah - NEW - Bj 2025 Options:* EX * Atex - Pyroban !!!! System = S6000 E Gas group = IIB Type = 3G (allowed in ZONE 2) Temp class = T3Equipped with RAVAS

Condition: excellent (used), Dissolver IKA Ultra Turrax T 65 S 5 Power 1.6 kW Speed 3600 1/min, 7200 1/min Ijdpfxjvkdlme Adnoa IKA dispersing tool S 65 with trough and container lid mobile, movable on castors Very good working condition, directly from production!!!