4
bore capacity in steel (diameter) 18,0 mm
throat 190 mm
bore stroke 80 mm
morse taper 2 Kurzspindel MK
turning speeds 225 - 4.300 U/min
voltage 400 / 50 Hz Volt
table: 300 x 240 mm
column diameter 65 mm
engine output 0,37 / 0,55 kW
weight 110 kg
Nloix
Furnishing:
- Large spindle speed range
- stepless speed adjustment
- machined base plate
- Electrically secured spindle protection
- Main switch lockable with motor protection switch
- Reversing switch for clockwise and counterclockwise rotati...
1
Alzstar 18-T/S
Drill labelled steel E335 (St 60): 18 mm
8ltvhjkg
Threaded Steel (St 60): M12
Gast (EN-GJL-200): M14
Short spindle: MK 2
Spindle hub: 80 mm
Exoffload: 190 mm
Saeculin diameter: 65 mm
Machine table, usable edition: 300 x 240 mm
T-grooves, number x width x distance: 2 x 12 x 80 mm
Distance spindle table min./max. 75/357 mm
Foram: Hand
Machine hoea with no options about: 840 mm
Net weight about: 110 kg
Propulsion: Crecess
Engine: 750/1500 U/min
Power: 0.37/0.55 kW
Spindle speed U...
8
ALZMETALL Alzstar 18-T/S,
Manufacturer. Alzmetall
Type: Alzstar 18-T/S
Condition: New
Drilling capacity in St 60: 18 mm,
Thread cutting in St 60: M 12,
thread cutting in GG 20: M 14,
short spindle: MK 2,
spindle speed: 225-4,300 rpm,
spindle stroke: 80 mm,
throat depth: 190 mm,
column diameter: 65 mm,
Machine table - usable support: 300x240 mm,
T-slots number - width - distance: 2 x12 x80 mm,
distance spindle-machine table min/max: 75/357 mm,
Machine base plate usable support: 300x240 mm,
T-slot...
1
bore capacity in steel (diameter) 40 mm
throat 293 mm
bore stroke 120 mm
spindle taper MT 3
column diameter 115 mm
table surface area 514 x 360 mm
spindle turning speed - stepless 160 - 2250 U/min
total power requirement 1,45 / 1,90 kW
weight of the machine ca. 285 kg
dimensions of the machine ca. H: 1840 mm
- 7"TFT LCD display with touch function:
Bu3b8ri9xv
* Manual input of spindle speed setpoint
* Speed display actual value
* Integrated drilling depth display with touch zero point transf...
4
Alzmetall Alzstar 30/s pillar drilling machine
Manufacturer: Alzmetall
Type: Alzstar 30/S
Cdcafuc0bs
Condition: new
drilling capacity steel E335 (St 60) 30 mm
Threading
steel E335 (St 60) M 16
Cast iron EN-GJL-200 (GG20) M 20
Short spindle MK 3
spindle stroke 140 mm
throat 293 mm
column diameter 115 mm
machine table, usable support 514 x 360 mm
T-slots, number x width x distance 2 x 14 x 224 mm
distance spindle-table min./max. 132/724 mm
feed manual
Machine height without options approx. 1770 m...
9
bore capacity in steel (diameter) 40,0 mm
throat 293 mm
bore stroke 120 mm
morse taper 3 MK
table: 514 x 360 mm
turning speeds 160 - 2250 U/min
engine output 1,45/1,90 kW
column diameter 115 mm
feed 0,10 + 0,20 mm/U
T-slots 2 x 14 x 224 mm
weight 285 kg
Machine height 1840 mm
** NEW ALZMETALL MODEL RANGE **
7 "TFT - LCD display with touch function:
* Spindle speed setpoint
* Actual speed display
* Integrated drilling depth display
* with touch zero point transfer
* Virtual drilling depth sca...
10
Drilling capacity in St 60 40 mm
threading in St 60 M 24 mm
threading in GG 20 M 30
bore stroke 120 mm
Short spindle MK 3
throat 293 mm
column diameter 115 mm
Machine table - usable table surface 514 x 360 mm
T-Slots Amount - Width - Distance 2 x 14 x 224 mm
Distance spindle - machine table min./max. 117 / 701 mm
feed 0,10 + 0,20 mm/U
spindle turning speed range 160 - 2250 UpM
total power requirement 1,45 / 1,9 kW
height of the machine 1840 mm
weight of the machine ca. 285 kg
Standard equip...
1
Drill labelled steel E335 (St 60): 30 mm
Tapping
Steel E335 (St 60): M 16
3oo0zgbuj
Gast EN-GJL-200 (GG20): M 20
Short spindle: MK 3
Spindle hub: 140 mm
Exoffload: 293 mm
Saeculin diameter: 115 mm
Machine table, usable edition: 514 x 360 mm
T-grooves, number x width x distance: 2 x 14 x 224 mm
Distance spindle table min./max. 132/724 mm
Foram: Hand
Machine hoea with no options about: 1770 mm
Net weight approx: 260 kg
Propulsion: Crecess
Engine: 750/1500 U/min 750...
6
2-fold line drilling machine make ALZMETALL type AX 2/S
make # 420/1 and 420/2, year of construction 1991
technical data:
drilling capacity steel 18 mm
drilling capacity cast iron 23 mm
spindle speed stepless 450 - 4300 rpm.
Feed by hand
spindle mounting MK 2
spindle stroke 90 mm
throat 250 mm
column diameter 90 mm
clamping surface of the table 635 x 335 mm
motor power per head 0,55 kW
outer dimensions L x W x H approx. 1700 x 870 x 1550 mm
total weight approx. 500 kg
with
- foot switch per tabl...
1
bore capacity in steel (diameter) 30 mm
throat 293 mm
bore stroke 140 mm
spindle taper MT 3
column diameter 115 mm
Becw3m2s
table surface area 514 x 360 mm
spindle turning speed - stepless 225 - 4300 U/min
total power requirement 1,0 / 1,6 kW
weight of the machine ca. 260 kg
dimensions of the machine ca. H: 1790 mm
7
ALZMETALL Column drilling machine Alzstar 23 S
Manufacturer: Alzmetall
Type: Alzstar 23 S
Condition: NEW
drilling capacity steel E335 (St 60) 23 mm
Threading
Fq8jdjj
steel E335 (St 60) M 14
Cast iron EN-GJL-200 (GG20) M 16
short spindle MK 2
spindle stroke 100 mm
throat 250 mm
column diameter 90 mm
machine table, usable support 370 x 300 mm
T-slots, number x width x distance 2 x 14 x 160 mm
distance spindle-table min./max. 140/670 mm
feed manual
Machine height without options approx. 1770 mm
net...
10
bore capacity in steel (diameter) 30,0 mm
throat 293 mm
bore stroke 140 mm
morse taper 3 MK
table: 514 x 360 mm
turning speeds 225 - 4.300 U/min
Hmxz8fomg
engine output 1,0 / 1,6 kW
column diameter 115 mm
weight 260 kg
Machine height 1.790 mm
** NEW ALZMETALL MODEL RANGE **
7 "TFT - LCD display with touch function:
* Spindle speed setpoint
* Actual speed display
* Integrated drilling depth display
* with touch zero point transfer
* Virtual drilling depth scale in the display
* Machine status...
4
== Exhibition machine ==
ALZMETALL column drill ALZSTAR 40 SV
with coolant unit B (option 25)
(consisting of separate tank (33l), pump with motor protection switch, complete fitting)
standard equipment:
Mushroom pushbutton, reversing switch (for right and left rotation), motor protection switch
Infinitely variable speed adjustment, digital speed display,
feed overload protection, protection class IP54, connector plug
Spindle protection with electrical fuse
technical data:
drilling capacity steel...
1
Table size: 514 x 360 mm
Speed: 160-2250 U/min
Spindle intake: MK 3
Spindle hub: 120 mm
Reprimrose: 0.1 and 0.2 mm/U
Spindle offload: 293 mm
Drilling power: Steel ST 60 32 mm, cast 38 mm
Emzwixu
Drilling: Steel ST 60 40 mm
Thread: Steel St 60 M 24, Guss M 30
Distance Spindel/Table: min 117/max 701 mm
Connection value: 2 KW
Weight: 0.29 t
Right-left run
Some available immediately from stock by manufacturer
The price refers to the basic machine
We are happy to submit an individual offer to you
12
Column drilling machine Alzmetall Alzstar 40/SV
Manufacturer: Alzmetall
Type: Alzstar 40/SV
Condition: new
Technical data:
Column diameter: 115 mm
Machine table (usable support): 514 x 360 mm
B2rfuixow
T-slots (number x width x distance): 2 x 14 x 224 mm
distance spindle-table (min./max.): 117 / 701 mm
2 feeds: 0.1 + 0.2 mm/rev.
height (mm): approx. 1840
drilling capacity St 60 (mm): 40
spindle stroke (mm): 120
throat (mm): 293
motor (kW): 1,45 / 1,9
Speed range (r/min): 160 - 2250
weight (kg): ...
7
bore capacity in steel (diameter) 23,0 mm
throat 250 mm
bore stroke 100 mm
morse taper 2 MK
table: 370 x 300 mm
turning speeds 225 - 4.300 U/min
engine output 0,6/0,95 kW
Beobzpwq3k
column diameter 90 mm
weight 175 kg
Machine height 1770 mm
Furnishing :
- Mushroom pushbutton (latching) for EMERGENCY STOP
- Reversing switch for clockwise and counterclockwise rotation
- Motor protection switch
- Infinitely variable speed adjustment
- Digital speed display
- Protection class IP 54
- Connection p...
3
ALZMETALL pillar drilling machine ALZSTAR 40 iTRONIC-V
with coolant unit B (option 25)
(consisting of separate tank (33l), pump with motor protection switch, complete fitting)
standard equipment:
7" TFT - LCD display with touch function: manual input spindle speed setpoint, speed display actual value,
Integrated drilling depth display with touch zero point acceptance, virtual drilling depth scale in the display,
Machine status indications and warnings in the display, service information,
Selecta...
1
Drilling capacity in steel (ST 60): 40 mm
Tapping capacity steel E335 (St 60): M 24
Cast iron EN-GJL-200 (GG20): M 30
Short spindle: MK 3
spindle stroke: 120 mm
throat depth: 293 mm
column diameter: 115 mm
machine table, usable support: 514 x 360 mm
T-slots, number x width x distance: 2 x 14 x 224 mm
distance spindle-table min./max.: 117/701 mm
feed: manual
Machine height without options: approx. 1840 mm
net weight: approx. 270 kg
Drive: stepless
spindle speed rpm: 160-2250
G0kpb8tew
5
Column drilling machine Alzmetall Alzstar 40/S
Ps9hhe
Manufacturer: Alzmetall
Type: Alzstar 40/S
Condition: new
drilling capacity steel E335 (St 60) 40 mm
short spindle MK 3
spindle stroke 120 mm
throat 293 mm
column diameter 115 mm
Machine table, usable support 514 x 360 mm
T-slots, number x width x distance 2 x 14 x 224 mm
distance spindle-table min./max. 117/701 mm
Feed manual
Machine height without options approx. 1840 mm
Net weight approx. 270 kg
Spindle speed rpm 160-2250
3
bore capacity in steel (diameter) 30,0 mm
throat 293 mm
bore stroke 140 mm
morse taper 3 MK
table: 514 x 360 mm
turning speeds 225 - 4.300 U/min
engine output 1,0 / 1,6 kW
column diameter 115 mm
weight 260 kg
Machine height 1.790 mm
Furnishing:
- stepless speed adjustment
- Reversing switch for R / L run
- digital speed display
- Connector and cable mounted
- Spindle protection with electr. validation
- 2 mtr. Connection cable with plug 16A
Beobzzhwql
5
bore capacity in steel (diameter) 40,0 mm
throat 293 mm
bore stroke 120 mm
morse taper 3 MK
table: 514 x 360 mm
Beob0cy3em
turning speeds 160 - 2.250 U/min
column diameter 115 mm
total power requirement 1,45 / 1,9 kW
weight 285 kg
range L-W-H 0,5 x 0,8 x 1,84 mm
Furnishing:
- autom. Feed 0.10 + 0.20 mm / rev
- stepless speed adjustment
- Short spindle MK 3
- Mushroom pushbutton (latching) for EMERGENCY STOP
- Reversing switch for clockwise and counterclockwise rotation
- Digital speed display...
1
bore capacity in steel (diameter) 40,0 mm
throat 300 mm
bore stroke 160 mm
threading M30 in St 60
turning speeds 100-1600 U/min
table: 615 x 430 mm
bore spindles - Morse Taper 4 Kurzspindel MK
column diameter 145 mm
feed 0,1-0,2-0,3-0,4 mm/U
engine output 1,8/2,9 kW
weight 450 kg
Machine height 1865 mm
Furnishing :
- automatic feed with electromagn. Feed clutch
- 4 feed rates 0.1-0.2-0.3-0.4 mm / rev
- stepless speed adjustment
- digital speed display
- Feed overload protection
- Spindle prot...
6
Column drilling machine ALZMETALL type AB 3 ESV
machine. No. 15967 Year of construction 1977
drilling capacity 32 mm
spindle mount MK 3 - short spindle sleeve
throat 290 mm
pinol stroke 160 mm
table size Ø 545 mm
column diameter 220 mm
spindle speed 55 - 1450 rpm infinitely variable
motor power 1 / 1,6 kW
Mains connection 380 Volt, 50 Hz.
- Spindle speed via 2 gear stages, 2 motor speeds and infinitely variable via variator gears
- Pre-feed stage for high torque at low speeds
- MK adapter from M...
5
bore capacity in steel (diameter) 50 mm
throat 385 mm
bore stroke 240 mm
Hbwadfmva
table surface area ø 500 mm
spindle taper MT 5
spindle turning speed range 40 - 800 U/min
feeds 0,1/0,14/0,2/0,28/0,4 mm/U
column diameter 220 mm
distance between table/spindle max. 670 mm
distance spindle/base plate 1180 mm
total power requirement 4 kW
weight of the machine ca. 1,4 t
dimensions of machine L x W x H 1,5 x 0,75 x 2,4 m
Accessories: drill chuck, coolant
5
Drill press, drill press, stand drill, pillar drill
-Table size: 400 mm
-spindle taper: MK4
-Projection: 320 mm
-Speeds: 80-700 rpm
-Columns: Ø 160 mm
-Spindle stroke: 175 mm
89axknski
-VIP transmission
-Feed: 0.09-0.28 mm/rev
-Tachometer: defective
-Dimensions: 1100/500/H1960 mm
-Weight: 650 kg
9
bore capacity in steel (diameter) 34,0 mm
throat 300 mm
bore stroke 160 mm
morse taper 4 MK
table: 615 x 430 mm
turning speeds 100 - 1.800 U/min
engine output 1,4 / 2,2 kW
column diameter 145 mm
thread M24 ST60
thread M30 GG20
feed 0,1-0,2-0,3-0,4 mm/U
weight 470 kg
Machine height 1865 mm
** NEW ALZMETALL MODEL RANGE **
7 "TFT - LCD display with touch function:
* Spindle speed setpoint
* Actual speed display
* Integrated drilling depth display
* with touch zero point transfer
* Virtual drill...
6
Offer 22325
Technical data:
- Drilling capacity in steel St 60 45 mm
- drilling capacity in steel St 60 55 mm
- Drilling spindle mounting long spindle MK 4
- drilling spindle speed infinitely variable 60 - 420 rpm
- thread cutting device
- drilling spindle stroke 140 mm
- throat 300 mm
- column diameter 145 mm
- table with 2 T-slots 460 x 420 mm
- distance table - drilling spindle min. / max. 35 / 640 mm
- distance drilling spindle - machined foot plate approx. 1150 mm
Qsycb
- fee...
5
bore capacity in steel (diameter) 55,0 mm
throat 300 mm
bore stroke 120 mm
threading M 36 in St 60
turning speeds 70 - 1.200 U/min
table: 615 x 430 mm
bore spindles - Morse Taper 4 Kurzspindel MK
column diameter 145 mm
feed 0,10 + 0,30 mm/U
weight 380 kg
Machine height 1850 mm
B3299fui
Furnishing :
- automatic feed
- Feed device 0.1 + 0.3 mm / rev
- stepless speed adjustment
- digital speed display
- Feed overload protection
- Spindle protection with electr. validation
including special equi...
6
As a machine dealer in Offenburg, we have new and used ALZMETALL table drilling machines and pillar drilling machines in our program. On our homepage you can get an overview of the drilling machines. If you have any questions, just give us a call.
Here we offer the new series of ALZMETALL pillar drilling machines with TOUCH display:
ALZMETALL AX3 iTRONIC-V pillar drilling machine.
Condition: NEW
Standard equipment
7" TFT - LCD display with touch function:
- Manual input spindle speed set valu...
13
- automatic feeds in all axes
- clamping table horizontal/vertical 90 ° inclinable
- motorized height adjustment of the boom
- 360 ° swivel range of the boom with pneumatic clamping
- coolant unit
- year of construction 1992
32rvkv87
Specification
- mounting: MK4
- drilling capacity in steel: 32 mm
- drilling capacity in cast iron: 45 mm
- speeds: 25 - 3000 rpm (16 steps)
- Drill feed range: 0.15 - 0.36 mm/rev (4 steps)
- throat depth: 1000 mm
- Pinol stroke: 200 mm
- Electrical height adjustmen...
5
Drill press, drill press, stand drill, pillar drill
-Speed display: (clock) defective
-Table size: 315 mm
-spindle taper: MK3
-Projection: 285 mm
-Speeds: 200 - 1400 rpm
-Columns: Ø 130 mm
-Spindle stroke: 150 mm
-Gear: VIP
Nlgwh
-Feed: 0.1-0.3 mm/rev
-Dimensions: 440/900/H1900 mm
-Weight: 408 kg
10
bore capacity in steel (diameter) 55,0 mm
throat 300 mm
bore stroke 140 mm
morse taper 4 MK
table: 615 x 430 mm
turning speeds 70 - 1.200 U/min
engine output 1,8 / 2,9 kW
column diameter 145 mm
thread M30 ST60
thread M36 GG20
feed 0,10 + 0,30 mm/U
weight 380 kg
Machine height 1850 mm
** NEW ALZMETALL MODEL RANGE **
7 "TFT - LCD display with touch function:
* Spindle speed setpoint
* Actual speed display
* Integrated drilling depth display
* with touch zero point transfer
* Virtual drilling d...
9
Spindle speed: 50 - 1280 rpm
Yu3lqo
tool holder: MK4
Number of feeds: 4
size of the clamping surface: 600x450mm
TECHNICAL SPECIFICATIONS Tool holder MK4 Table size including water channel 720 x 580 mm Clamping area 600 x 450 mm Spindle speed 50 - 1280 rpm Spindle stroke 180 mm Distance spindle nose - table 170 - 780 mm Projection 320 mm 4 automatic feeds 0.15-0.20-0.30-0.36
5
bore capacity in steel (diameter) 40,0 mm
threading M 24 in St 60
throat 293 mm
bore stroke 120 mm
morse taper 3 Kurzspindel MK
table: 360 x 515 mm
turning speeds 80 - 1.125 U/min
feed 0,10 + 0,20 mm/U
total power requirement 1,0 / 1,6 kW
weight 270 kg
height of the machine 1,84 m
Furnishing:
- Lockable main switch with motor protection switch
- Mushroom pushbutton (latching) for EMERGENCY STOP
- Infinitely variable speed adjustment
- Digital speed display
- Feed overload protection
- Protect...
1
CNC machining center
BAZ Alzmetall 26
Year of manufacture: 2000
Technical data:
x-way 1200 mm
Cc7fpfhm8p
y-way 600 mm
z-way 800 mm
total power requirement 15 kW
machine weight approx. 1000 kg
space requirement approx. 4000 x 3000 x 3200 m
control Heidenhain 426
table clamping area 1250 x 630 mm
speed range 1 - 8000 rpm
drive power 13 kW
tool holder SK 40
Number of tool magazine places 24 stations
feed range 1 - 20000 mm/min
rapid traverse X,Y 40 / Z 30 m/min
Control CNC 426 Heidenhain
Accessor...
6
bore capacity in steel (diameter) 35 mm
throat 330 mm
bore stroke 165 mm
spindle taper MK4
turning speed range - stepless 130-480/480-1750 U/min
table width 742 mm
table depth 594 mm
total power requirement 2,2 kW
weight of the machine ca. 7 t
Mw3qps
Feed with electromagnetic feed clutch
0.1/0,2/0,3
right- and left rotation
Cooling unit not available
Table and Drilling Head height adjustable
height adjustment of upper drilling unit: 200 mm
Drill, drill press, pillar drill, pillar drill
-Manufacturer: Alzmetall, column drilling machine type AB 3 ESV
-Motor: 0.9/1.5 kW
-Speeds: 65 - 1750 rpm, 4 levels, infinitely variable
-Table size: 500 x 370 mm, travel 530 mm
-Spindle mount: MK3
C2v8plwu
-Spindle stroke: 180 mm
-Feed: 0.1-0.2-0.3 mm/rev
-Projection: 285 mm
-Columns Ø: 130 mm
-Coolant device
-Dimensions: 1000/625/H1900 mm
-Weight: 446 kg
