Alzmetall ab 45 s for sale
Your location was not identified (Edit)
1976
ready for operation (used)
-column drill -second hand-
- ALZMETALL - AB 45 S
- yom 1976
- tool tapper MK 4
- spindle speed with 2-step-mottor and 2 gear steps:1280rpm
- table size: 500 x 500mm
- coolant system / automatic feed
Bh92bbng
- WITHOUT manual more
6
column drill
Offer number: 19451
Make: ALZMETALL
Type: AB 45 S
machine no.: 1251
Year of construction: 1985
Technical data:
- Drilling capacity in steel ST 60 40 mm
- Drilling capacity in steel ST 60 55 mm
- Thread cutting device
- Drill spindle adapter MK 4
- Drill spindle stroke 180 mm
- Projection 350 mm
- Table with 2 T-slots 520 x 520 mm
- max. distance table - drill spindle 744 mm
- max. distance base plate - drilling spindle 1214 mm
- Column diameter 200 mm
Jsxqvrdh
... more
8
1987
good (used)
Manufacturer Alzmetall
Model AB 45 S
year of manufacture 1987
Machine no. 1420
Technical data:
Speeds 50-640 rpm
infinitely variable
2 gears
Rev counter
automatic electric magnetic feed 0,15--0,2--0,3--0,36
Izflgcp
Work light
MK 4 recording
Pinol stroke 180mm
Emergency stop
Coolant pump
Throat 350mm
table clamping surface 600x460mm
Height of the machine ca.2000mm
Weight 550kg more
6
1987
used
Column drilling machine ALZMETALL type from 60 S
Bdnlrr20vw
Masch. No. 228 built in 1987
Drilling capacity in steel 65 mm
Drilling capacity in cast iron 75 mm
Spindle mount Mt 5 - short sleeve
Throat depth 400 mm
Pinolhub 240 mm
Table size 730 x 540 mm
Column diameter 260 mm
40-1200 RPM infinitely variable spindle speed
Motor power 5 and 7.5 kW pole-shift bar
Power supply 400 Volt, 50 Hz
-automatic feed in 5 levels of 0.1 0,14-0,2 0.28 0.4 mm / Rev
-Transmission level for high torque at low spee... more
bore capacity in steel (diameter) 40 mm
Bhk7vj0nii
throat 350 mm
bore stroke 250 mm
table surface area 550x720 mm
turning speeds 1 bis 1500 U/min stufenlos
thread depth max. 220 mm
spindle taper MT 4
total power requirement 2 kW
weight of the machine ca. 1 t
dimensions of the machine ca. 0,6 x 0,8 x 2 m
Threading attachment
stepless speed up to 1500 rpm more
bore capacity in steel (diameter): 32 mm
throat: 300 mm
bore stroke: 175 mm
drill capacity in cast iron: Ø 45 mm
Irekxwn7w
spindle turning speed - continuous: 65 - 1750 / 4 step U/min
spindle taper MT: 4
feed: 0,1 - 0,2 - 0,3 (automatisch) mm/U
table clamping surface:: 500 x 370 mm
table adjustable: 600 mm
table rotating: 360 °
distance spindle center to floor plate:: 1165 mm
base plate: 360 x 360 mm
column diameter: Ø 145 mm
total power requirement: ca. 2,2 kW
weight of the machine ca.: 480 kg... more
bore capacity in steel (diameter) 50 mm
throat 385 mm
bore stroke 240 mm
boring spindle MK 5
Bzzcedem
table surface area 880 x 670 mm
0 40 - 800 U/min
feed 0,1-0,14-0,2-0,28-0,4 m/min
total power requirement 4 kW
weight of the machine ca. 1,3 t
dimensions of the machine ca. 1,5 x 0,8 x 2,45 m
Pillar drill with
- Thread cutting device
- Feed
- quick-release drill chuck
- Vise 125mm more
7
Column drilling machine
Make Alzmetall
Type AB 5/S
MK 5
Machine number 2014
Speed 40 - 800
Table size 880 x 670 mm
bottom 500 x 500 mm
Throat 390 mm
Biaqbfs9uy
4 feeds 0.1 - 0.4 rpm
Coolant unit
Lighting
380 volts
4 kw
Space requirement : H.2400 x W.880 x D. 1600 mm more
12
1976
excellent (used)
Drilling machine Fabr ALZMETALL Type AB 50 S in very good condition.
Mach nr 164
Bv820mlc
Technical data:
- Drilling capacity in steel 60 50mm
- Max. drilling capacity 65mm
- spindle speed variable 40 up to 800 rpm.
- Table size 730 x 540 mm
- spindle taper MT5
- throat 385 mm
- Column diameter 220 mm
- aut feeds 0.10 - 0.14 - 0.20 – 0,28 - 0.40 mm / rev
- quill stroke 240 mm
- Dimentions L-B-H 1,2 x 0,9 x 2,6 m
- Weight app. 1200 kg more
6
8
ready for operation (used)
Column drill ALZMETALL type AB 5/STtechnical data:drilling capacity into full ST/G50 / 65 mmspindle mountingMK 5outreach85 mmkminimum/maximum distance between table and boring sleeve385 / 835 mmquinol stroke240 mmspindle speeds infinitely variable40-800 rpm..5 automatic feed0,1 - 0,4 mmdrive motor 380 V4,3 kWweight approx.350 kg Space requirement880 x 1580 x 2400 mmmwith base plate with T-slots- Flange mount for a multi-spindle head used, ready for operationSpecial price - table adjustment via h... more
1
Drilling capacity in steel / cast iron 50/65 mm
Bd7pta2sbi
Drilling capacity in steel 70 mm
Feed 0.1 - 0.54 mm / Rev
Speed 62-1240 RPM
Recording MK 5 spindle stroke (drilling depth) 240 mm
Usable projection 385 mm
Table 800 x 680 mm
Spindle head diameter 70 mm
Height 2350 mm the machine more
5
Manufacturer Alzmetall
Model AB 35 S
Built xx
Mash.No.01792
Hvmuqkh
Technical data:
Speeds 130-1490r/min
infinitely adjustable
2 geargears
Right-left running
Tachometer
automatic electr. magnetic feed 0.1--0.2--0.3
Working light
MK 4 Recording
Drilling chuck Röhm B16
Pinolstroke 150mm
Discharge 300mm
Table clamping area 500x370mm
Height of the machine approx.1900mm
Weight 430kg more
5
Column drilling machineOffer number: 19289Factory: ALZMETALLTyp: AB 35 SMaschinen-Nr: 2156Baujahr:1980Technical data:-Drilling capacity in steel ST 60 32mm Drilling capacity in steel ST 60 45mm Drill spindle adapter MK 4 Drill spindle stroke 160mm Throat 300mm Table with 2 T-slots 500 x 370mm Column diameter 145mm Feeds - Electromagnetic 0,1 - 0.2 - 0.3mm/rev with overload protection Drilling spindle speeds infinitely variable - stage 1 130 - 480 rpm - stage 2 480 - 1750 rpm Drive 400 V / 1.4 / ... more
1
5
1
bore capacity in steel (diameter) 40,0 mm
throat 300 mm
bore stroke 160 mm
threading M30 in St 60
turning speeds 100-1600 U/min
Bfuqfbn2ax
table: 615 x 430 mm
bore spindles - Morse Taper 4 Kurzspindel MK
column diameter 145 mm
engine output 1,8/2,9 kW
weight 450 kg
Machine height 1865 mm more
4
2020
good (used)
Vertical drilling machine
Drilling adapter MK3
Drilling capacity up to 35 mm in cast iron
approx. 28 mm in steel
stepless speed adjustment
up to approx. 1500 rpm
Ernnhhpgi more
4
bore capacity in steel (diameter) 28 mm
throat 285 mm
bore stroke 180 mm
spindle taper MK 3
bore capacity in cast iron 32 mm
spindle turning speed range 110 - 1450 U/min
drilling feeds 0,1 - 0,2 - 0,3 mm/U
total power requirement 1,5 kW
weight of the machine ca. 1 t
dimensions of machine L x W x H 1,35 x 1,5 x 2,4 m
Damuyad
- with FEHLMANN cross table, clamping surface 600 x 320 mm,
cross table manually movable X/Y = 420/300 mm, with DRO
HEIDENHAIN on X/Y
Accessories: FIBROTAKT rotary in... more
5
bore capacity in steel (diameter):32 mm
Jvjdca
throat:290 mm
bore stroke:160 mm
spindle taper MT:3
spindle turning speed - stepless:110 - 1450 U/min
table-size:610 x 470 mm
table clamping surface::500 x 370
weight of the machine ca.:0,4 t
dimensions of the machine ca.:900 x 650 x 1900 mm more
4
bore capacity in steel (diameter): 36 mm
throat: 340 mm
bore stroke: 180 mm
spindle taper MT: MK 4
spindle turning speed - continuous: 30 - 700 7 4 step U/min
feed: automatisch / manuell mm/U
table clamping surface:: 450 x 600 mm
table adjustable: vertical 600 mm
table rotating: 306 °
distance drilling head - clamping area: 80 - 680 mm
base plate: B x L: 380 x 450 mm
column diameter: Ø 110 mm
total power requirement: ca. 3,4 kW
weight of the machine ca.: auf Anfrage kg
Bewifdkkiv
dimension machi... more
7
Drilling capacity in steel ST 60 36 mm
- Drilling capacity in steel ST 60 40 mm
- Thread cutting device in steel ST 60 M 24
- Drilling spindle holder MK 4
- drill spindle stroke 160 mm
Dww8ki
- Drilling depth fine adjustment with fixed stop
- Projection 330 mm
- Table with 2 T-slots 720 x 450 mm
- min. / max. distance table - drilling spindle 257 / 919 mm
- Stand width 290 mm
- Feed rates 0.1 - 0.2 - 0.3 - 0.36 mm/rev
- Drilling spindle speeds infinitely variable
- Stage 1 70 - 400 rp... more
5
bore capacity in steel (diameter) 34,0 mm
throat 300 mm
bore stroke 160 mm
morse taper 4 MK
table: 615 x 430 mm
bore capacity in cast iron 40,0 mm
threading 24 in ST M
threading 30 in GG M
turning speeds 100 - 1.800 U/min
total power requirement 1,4 / 2,2 kW
Nloin
weight 470 kg
height of the machine 1865 m more
5
drilling capacity: 32 mm
Tool holder: MK 3
Bitimlgflg
Speed range, infinitely variable: 130 - 3500 rpm
spindle stroke: 160 mm
table size: 510 x 300 mm
Projection: 290 mm
Column diameter: 115 mm
Engine power: 1.5 / 1.9 kW
Connection: 380 V
Weight: 350 kg
Dimensions LxWxH, approx.: 970 x 650 x 1900 mm
Equipment:
- Machined base with T-slots
- Coolant foot with pump
- Emergency stop pushbutton
- Drill depth stop
- Speed indicator
- Albrecht drill chuck
- Machine Light
- Foot switch (On/Off) more
1
bore capacity in steel (diameter) 30 mm
throat 300 mm
bore stroke 150 mm
fuse protection -thermal 5 A
current capacity 380 V / 50 Hz
Biatvm7ry8
table surface area 300 x 400 mm
tool taper MK 3 0
turning speed range: 65-1150 U/min
total power requirement 0,9-1,3 kW
weight of the machine ca. 1,0 t
dimensions of the machine ca. 0,6x1,1x1,8 m more
good (used)
- column drill - second hand-
- ALZMETALL - SB 4 SV
- tool tapper MK 4
- spindle speed: 65 - 1200rpm
- with automatic feed and threading
- with vice - WITHOUT sliding table
Bxcurrxk more
3
Drill sleeve holder: MK 3.
Drill sleeve stroke: approx. 150 mm.
Dwqdi3
Drill sleeve speed: 65 - 1750 rpm, infinitely variable.
Drill sleeve feed: 0.1 - 0.2 - 0.3 mm/rev.
Tapping device with changeover, right - left rotation.
Drilling table surface: 500 x 400 mm.
Drilling table height adjustable via hand crank.
Machine height: approx. 1900 mm, weight: approx. 500 kg.
The machine can be inspected and demonstrated under power by arrangement and is immediately available.
Please also note my further ... more
5
ready for operation (used)
Used ALZMETALL AB 3 ESV drilling sleeve holder: MK 3. drilling spindle speed: 65 - 1750 rpm. Automatic drill feeds: 0,1 - 0,2 - 0,3 mm/rev. Thread cutting and drilling device. Drill sleeve stroke: 150 mm, throat depth: 290 mm. Table dimensions: 500 x 400 mm. Machine height: approx. 1900 mm. Weight: approx. 500 kg.
Column diameter: 130mm
Recording: MK3
Dimensions (LxWxH) approx.: 1.100 x 650 x 1.900
drilling capacity: steel 32mm
table clamping surfaces: 500 x 400mm
spindle stroke: 160mm
incl.... more
10
bore capacity in steel (diameter) 28,0 mm
throat 293 mm
bore stroke 180 mm
turning speeds 55 - 1.450 U/min
column diameter 115 mm
table: 515 x 400 mm
feed 0,15 mm/U
Bi7farnnju
engine output 1,1 / 1,6 kW more
7
High performance - column drilling machine
offer number: 20199
Make: ALZMETALL
Type: AB 4 SV
Machine No: 19502
Year of construction: 1991
Technical data:
- Drilling capacity in steel ST 60 40 mm
- Drilling capacity in steel ST 60 50 mm
Hgqeg8v
- Drilling spindle holder MK 4
- drill spindle stroke 180 mm
- Drilling spindle speeds infinitely variable with counter gear
- Stage 1 50 - 175 rpm
- Speed 2 175 - 640 rpm
- Stage 3 100 - 350 rpm
- Stage 4 350 - 1280 rpm
- Projec... more
2
1964
good (used)
Drilling capacity in steel 40 mm
Drilling capacity in GG 50 mm
Drilling spindle holder MK 4
Speed range, infinitely variable 80 - 710 rpm
Spindle throat 340 mm
spindle stroke 160 mm
Table size Ø 565 mm
Feed rate 0.09 / 0.16 / 0.28 mm/rev
Engine power 3 KW
Column diameter 160 mm
Base plate clamping area 385 x 460 mm
Dimensions L x W x H 565 x 1000 x 2080 mm
Machine weight approx. 450 kg
Accessories / Special features:
- Automatic feed with cross handle shift
- Infinitely variable speed adjustment... more
1
Flow drilling capacity in steel St 12.03 20 mm
Thread moulding power in steel St 12.03 M 20
Drilling capacity in St 60 40 mm
Thread cutting in St 60 M 30
Thread cutting in GG 20 M 36
Short spindle MK 4
Spindle stroke 160 mm
Extension 300 mm
Column diameter 145 mm
Machine table - usable edition 615x430 mm
T-slots Number - width - distance 2x14x224 mm
Distance spindle / table 147/688 mm
Feed 0.1-0.2-0.3-0.4 mm/U
Spindle speed 140-4000 rpm.
Total power requirement 4.0 kW
Machine height 1885 mm
Mach... more
11
kgDrive infinitely variableMotor 1500 / 3000 rpmPower1,45 / 1,9 kWSpindle speed rpm160-2250List price of the basic machine 7.412€Additional equipment:- 20.1 Thread cutting device with foot switch - 24. Coolant device A- 50.6 Drilling depth fine adjustment and- Fixed stop Setting value 0,1 mm Call us and ask for special discounts or send us your inquiry by email with your contact information and we will contact you.
Bswr9fau more
3
1 used pillar drilling machine
Fabr. Alzmetall
Type AB 3 ES
year 98
Drill sleeve holder: MK 3.
Drill sleeve stroke: approx. 150 mm.
Bhnmwufq7p
Drilling spindle speed: 65 - 1750 rpm, infinitely variable.
Drilling table surface: 500 x 400 mm.
Drilling table height adjustable via hand crank.
Machine height: approx. 1900 mm, weight: approx. 500 kg.
The machine can be inspected and demonstrated under power and is immediately available. more
4
bore capacity in steel (diameter) 50,0 mm
throat 350 mm
B32woaah
bore stroke 200 mm
threading M 42 in St 60
turning speeds 60 - 1.530 U/min
table: 720 x 510 mm
bore spindles - Morse Taper 4 Kurzspindel MK
column diameter 200 mm
engine output 3,6 / 4,3 kW
weight 605 kg
Machine height 1950 mm more
5
Technical data:
-Drilling capacity in steel ST 60 40 mm
-Drilling capacity in steel ST 60 50 mm
-Spindle mount MT 4
-Spindle hub 180 mm
-Spindle speed continuously adjustable with stub shaft
-Level 1-100 - 350 RPM - 2-350 level projection - 1280 RPM - 330 mm
-3 feeds 0.1 - 0.2 - 0.3 U/min
-Table with 2 T-slots 720 x 360 mm
Beinsofmtt
-height-adjustable via rack and pinion with hand crank
-maximum distance table - drill bit approx. 780 mm
-maximum distance worked base plate - s... more
2
Column drilling machine Fabr. ALZMETALL Type AB 3 ESV
Ser." 3563
Technical data:
Drilling capacity in steel 28 mm
Drilling capacity in cast iron 32 mm
Bfgrs0rvoj
Spindle holder MK 3
Spindle speeds 160 - 1420 rpm.
Extension 280 mm
3 automatic feeds 0.1 / 0.2 / 0.3 mm/U.
Column diameter 130 mm
Spindle stroke 120 mm
Table size 500 x 370 mm
Drive power 1.5 kW
with
- automatic feeds
- Drilling chuck
used, in good condition more
1
Flow drilling capacity in steel St 12.03 20 mm
Drilling capacity in St 60 40 mm
Short spindle MK 4
spindle stroke 160 mm
Throat 300 mm
Column diameter 145 mm
machine table - usable support 615x430 mm
T-slots Number - width - spacing 2x14x224 mm
distance spindle / table 147/688 mm
Feed rate 0.1-0.2-0.3-0.4 mm/rev
Spindle speed 140-4000 rpm
Total power requirement 4.0 kW
Machine height 1885 mm
Machine weight approx. 470 kg
Standard equipment:
- Electromagnetic feed clutch with overload protection ... more
12
Column drilling machine Alzmetall Alzstar 40/SVManufacturer: AlzmetallTyp: Alzstar 40/SVCondition: newTechnical data:Column diameter: 115 mmMachine table (usable support): 514 x 360 mmT-grooves (number x width x distance): 2 x 14 x 224 mmDistance spindle table (min. distance): 2 x 224 mmDistance spindle table (min. distance): 2 x 2 mmDistance spindle table (min. distance): 2 x 2 mmDistance spindle table (min. distance): 2 x 2 mmDistance spindle table (min. distance): 2 x 2 mmDistance spindle tab... more
2
drilling capacity steel/GG: 40/55 mm
spindle taper: 4 MK
arm length: 345 mm
table size: 450 x 600 mm
spindle sleeve stroke: 180 mm
spindle turning speed range: 30 - 760 rpm
carriages: 0,1; 0,2; 0,3 mm
engine: 380 V, 2,3/3,4 kW
space needed: 1150 x 700 x 2100 mm
Na7bf
weight: 640 kg more
10
bore capacity in steel (diameter) 35,0 mm
throat 295 mm
Bi7fah3hvt
bore stroke 180 mm
table surface area 475 x 595 mm
turning speed range - stepless 65 - 1.750 U/min
feed range - spindle 0,1. 0,2. 0,3 mm/U
total power requirement 2,0 kW
weight of the machine ca. 400 kg. more
4
Technical data:
-Drilling capacity in steel ST 60 25 mm
-Drilling capacity in steel ST 60 28 mm
-Spindle mount MT 3
-Spindle hub 180 mm
-Infinitely variable spindle speeds
-adjustable - level 1 130-480 RPM
-Level 2-480-1700 RPM
-Feed 0.15 mm / Rev
-Throat depth 290 mm
-maximum distance table - spindle 620 mm
-Table with 2 T-slots around 520 x 400 mm
-Height-adjustable via rack and pinion with hand crank
Bednv9lb2d
-Drive: 400 V / 1.1 / 1.3 kW
-Space requirement approx. ... more
1
Column drilling machine Fabr. ALZMETALL Type AB 3 ES
Bfgrtxfgkm
Fabr. # 14320
Technical data:
Drilling capacity in ST 60 28 mm
Drilling capacity in GG 20 30 mm
Drilling capacity in ST 60 35 mm
Table clamping area 400 x 305 mm
Extension 290 mm
Column diameter 120 mm
Spindle holder MK 3
infinitely variable spindle speeds 110 - 1450 rpm.
Spindle stroke 150 mm
Engine power 1.5 kW
with
- Drilling chuck
used, in good condition more
1
Drilling capacity in steel St 60 40 mm
Drilling capacity in cast iron GG 20 46 mm
Drilling capacity in St 60 50 mm
Short spindle MK 4
Extension 330 mm
Table dimensions 742x460 mm
T-slots Number - width - distance 2x14x224 mm
Distance spindle / table 266/928 mm
Column diameter 290 mm
Spindle stroke 160 mm
Feeds 0.1-0.2-0.3-0.4 mm/U
Machine height 2110 mm
Speed 100-1600 rpm
Total power requirement 1.8/2.9 kW
Machine weight approx. 760 kg
Standard equipment:
- Electromagnetic feed coupling with ov... more
2
1 used pillar drilling machine, make Alzmetall, type AB 4 SJ - rotary table feed - coolant equipment
Nppxr more
4
7
box column - high performance drilling machine
offer number: 20089
Make: ALZMETALL
Type: AB 35 HST
Machine No: 1484
Year of construction: 1980
Technical data:
- Drilling capacity in steel ST 60 32 mm
- Drilling capacity in steel ST 60 45 mm
- Drilling spindle holder MK 4
- drill spindle stroke 160 mm
- Projection 330 mm
- Table with 2 T-slots 720 x 560 mm
- max. distance table - drilling spindle approx. 800 mm
- Feed rates 0.1 - 0.2 - 0.3 mm/rev
- Drilling spindle speeds infinite... more
6
3
Drilling capacity in steel St 60 50 mm
Drilling capacity in cast iron GG 20 60 mm
Drilling capacity in St 60 60 mm
Thread cutting in St 60 M 42
Thread cutting in GG 20 M 60
Short spindle MK 4
Projection 350 mm
Machine table - usable support 720x510 mm
T-slots number - width - distance 2x14x224 mm
Distance spindle / table 138/874 mm
Column diameter 200 mm
Spindle stroke 200 mm
Feed rate 0.15-0.36 mm/rev.
Spindle speed 60-1530 rpm.
Drive motor 3,6/4,3 kW
Machine height 1950 mm
Machine weight appro... more
