Used Adk 125 Modell for sale (19,829)

Condition: used, Year of construction: 2000, Single-head capping machine Zalkin TM125 La cadence maximale de cet équipement est d’environ 3000 flacons / heure L’introduction des bouteilles se fait par accumulation. Sens gauche -> droite Current format: Plastic capsule: diameter 60.5 mm x 4.5 mm Aluminium capsule: diameter 62 mm x 4.5 mm Possibility of changing the capping head. Roue 16 alvéole : diamètre primitif 530 mm / diamètre alvéole 56 mm - Distributeur de capsule (Bol vibrant + goulotte de distribution prise à la volée) type ADV N°6430 et 6428. - Table tournante : alimentation flacons Inlet belt: 2000 mm / width 110 mm Inlet belt on the machine: 1500 mm Outlet belt: 500 mm Crimping head 104 Tension : 380 Volts 50 hz coffret électrique coté sorti. 1 cellule de contrôle présence flacon capsule plastique 1 cellule de contrôle présence flacon capsule aluminium. Itedpex Rz Htofx Ah Nsb 1 cellule détection d'accumulation 1 cellule détection de bourrage

Condition: used, Used vertical cosmetic reactor/process vessel by Ekato (DE) model SRA 2500. Tank has total volume 3674 l and working volume from 650 l up to 2500 l. Tank is designed for work on pressure from -1 up to 3 bar, working temperature up to 151 C. Test pressure on tank up to 4.69 bar. Tank is designed in AISI 316L. Tank is layered with stainless steel (AISI 304) heating jacket, volume 190 l. Jacket is designed for work on pressure in range from 0 to 4 bar, working temperature up to 151 C. Test pressure on jacket up to 7.81 bar. Top of the reactor is bolted and has central mounted frame/paravisc type agitator with wall scrappers, driven via reducer and el motor 37 kW, 1465 rpm, 400-690 V, 50 Hz. Working rotation up to 35 rpm. Reactor has central bottom outlet with discharge outlet. There are also included 4 stainless steel legs and tension sensors. Includes technical documentation. Last time used in cosmetic industry. Specifications: Capacity: 2,500 L Type of stainless: 316L Internal Pressure: 3 bar Internal Temperature: 151°C Jacket Pressure: 4 bar Type Of Heads: Bolted Legs/Lugs: 4 legs Itedpfx Aox Ryvmsh Nsb

Condition: used, Used stainless steel lab size mobile fluid bed dryer by Glatt model GPCG-1. Working volume of drying chamber up to 4.5 l. Operating pressure 0.79 bar. Machine is equipped with two stainless steel cones - one for coating process, second for drying. Coating cone is also equipped with 4 stainless steel screens. Nozzle not included. Electric power supply for heating 4 kW. Working temperature range from 10 up to 140 C. Dryer is equipped with centrifugal fan driven by el. motor 2.2 kW, 2850 rpm, 220-230/380-400 V, 50 hz. Compressed air - pressure 6 bar. Ijdpex Ryqqjfx Ah Notb

Condition: used, Used Brogtec (CH) model MH-8 stainless steel homogenizing mixer. Mixer has total volume of mixing chamber 10 l and working volume about 8 l. Tank is rising and lowering manually. Has bottom discharge outlet and possibility to discharge by manual tilt. Working pressure range - mixing chamber from vacuum till 29 PSI (2 bar). Heating jacket up to 43 PSI (3 bar). Working temperature range - mixing chamber from 32 - 250 F (-1 to 120 C). Heating jacket - from 89 - 250 F (31 - 120 C). Mixer is equipped with anchor with wall scrappers type agitator, vertical ribbon agitator and hi-speed homogenizing mill. Anchor and ribbon agitators are driven by gearbox and el motor 0.3/0.44 kW, 1660/3260 rpm, 460 V, 60 hz. Working rotation of vertical ribbon agitator is about 124 rpm, working rotation of anchor agitator - up to 62 rpm. Hi-speed homogenizing mill is belt driven by el motor 0.3/0.44 kW, 1660/3260 rpm, 460 V, 60 hz. Working rotations from 2755 up to 5379 rpm. Mixer is equipped with local vaccum pump and heating device by GMK type teco 60. Machine has local control panel. Itodpfxsx Ryqkj Ah Njb

Condition: used, Używana tabletkarka rotacyjna produkcji Kilian (DE) model T100/18 EU-B. Maszyna ma 18 gniazd. Średnica matrycy 30.16 mm x wysokość 22.22 mm. Robocza wydajność w zakresie od 5400 do 129600 tabletek, w zależności od rozmiaru, kształtu i produktu. Maksymalna średnica tabletki do 16 mm. Maksymalne napełnienie do 16 mm. Prasowanie hydrauliczne. Docisk wstępny do 60 kN. Docisk główny do 65 kN. Maszyna posiada lokalny panel sterowania i szafę elektryczną wyposażoną w komputer i drukarkę do rejestracji pracy maszyny. Dokumentacja techniczna dostępna wraz z maszyną. Brak oprzyrządowania. Iedpfx Asx Ryp Toh Netb

Condition: used, Used Zanchetta model Rotolab stainless steel mixer granulator. Total bowl capacity 2.8 litre, working capacity approx. 1.6 litre. Has jacketed bowl with inside dimensions 160 mm diameter x 140 mm height. Main impeller rotation speed 120 - 1200 rpm driven by electric motor. Chopper blade rotation speed 6000 rpm driven by electric motor. Includes local control panel and integrated switchboard, connection for vacuum and nitrogen (.). Itsdpfxjx Ryupj Ah Nsb

Condition: used, Used Silverson model GX20 stainless steel multi-purpose high shear mixer. - 4-blade mixer direct driven by a 15 kW, 2960 rpm, 50 Hz motor Itodpfex Rypyex Ah Nob - has installed General Purpose Desintagration Head with inner diameter approx 118 mm (plus spare Emulsor Head)

Condition: used, Used Molteni model MPME700SV-TDS stainless steel triple action vacuum mixer. Manufacturer: Molteni. Material: Stainless steel. Capacity: Mixing pan approximately 700 litres. Type of blades: (1) high speed disperser driven by a 48kw motor, (1) high speed disperser driven by a 36.5kw motor and (1) anchor type agitator driven by a 18.5kW Exd rated motor. Also includes: Hydraulically operated raise and lower. For details about the refurbishment work, contact a member of our sales team. Equipped With: Per RD 28/08/25 on hold for potential inspection 24/09/25, 25/09/25 or 26/09/25. Itodpfx Ajx Rytxjh Neb

Condition: used, Comprehensively tested and refurbished, used Winkworth model RT400 316 stainless steel high speed ploughshare mixer. Material: Stainless steel Capacity: 400 litre (product dependent) Mixing trough: 1,300mm long x 800mm diameter Discharge Type: Centre bottom pneumatically operated flap discharge value Type Of Blades: Ploughshare blades Motor: 11kw, 380-415 volt, 3/50, 1450-1460rpm motor through Custom Power Transmission gearbox type MO820 Revolutions Per Minute: 99rpm Also includes: (1) stainless steel side entry chopper driven by 4kw, 380-415volt, 2840-2870rpm, 3/50 motor. A video of this mixer is available below. Specifications: Bowl Volume: 105 gal Motor Power: 11 kW Iedpfox Rytrjx Ah Notb Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 4kW RPM Of Choppers: 2840 - 2870 HP Of Unit: 11kW Revolutions Per Minute: 1450 - 1460 Vacuum Internal (Y/N): N Jacket (Y/N): N Jacket Pressure: N/A Jacket Temperature: N/A Weight: N/A Dimensions: 1,300mm long x 800mm diameter

Condition: used, Reportedly unused since refurbished Winkworth model 16Z-63 stainless steel z-blade mixer. Mixing trough measures approximately 400mm x 400mm x 350mm deep. All product contact parts in 316/316L stainless steel. Approximate capacity 27 to 36 litre working capacity (product dependent). (2) 316/316L stainless steel z-blades driven by 4kw, 3/50, 1464/37 rpm geared motor. Unit has stainless steel hinged vacuum rated hood/lid with clamps. External 304/304l stainless steel jacket rated 3.5 bar working pressure at 150 deg.c. Unit includes electrically actuated tilt discharge mechanism. Unit includes ICS Cool Energy Ltd model iC220 chiller. Has control panel for mixer and chiller operation. Itodpfx Ahsx Rytfj Nob

Condition: used, Used Premier Labellers model P150 tamper evident labeller. Can do front and back tamper evident seals/labels to cartons and boxes. Approximate capacity 150PCS/min. Itjdox Ryruopfx Ah Neb

Condition: used, Comprehensively tested, used WINKWORTH model RT80 stainless steel jacketed high speed mixer. Manufacturer: Winkworth Model: RT80 Material: Stainless Steel Capacity: 120 litre, working capacity 80 litre Agitation: Shaft equipped with 4 mixing blades driven by 7.5 kw, Hp 10, Rpm 30/150, 380 volt motor. Stainless steel chopper driven by 5.7/4.7 kW, 50Hz, 2900/1450 rpm, 380-415 V Also includes: Stainless steel jacket rated 3.5 bar at 200 DegC, 2000 watt hot water heating skid. Local controls. Specifications: Bowl Volume: 31.7 gal Motor Power: 7.5 kW Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 4.7 - 5.7 kW RPM Of Choppers: 1450 - 2900 HP Of Unit: 7.5kW Itjdpfjx Ryq Dox Ah Nob Revolutions Per Minute: 30 - 150 Vacuum Internal (Y/N): N Jacket (Y/N): Y Jacket Pressure: 3.5 Bar Jacket Temperature: 200 Deg.C.

Condition: used, Comprehensively tested and refurbished, Used Winkworth model RT200 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Material: Stainless Steel Capacity: Approximately 200 Litre Capacity Mixing chamber: Approximately 1,000mm x 650mm Diameter Discharge Type: Centre Bottom with Discharge Valve Type Of Mixer: T-Arm Blades Motor: 11kW SEW Geared Motor Also includes: Stainless Steel Side Entry Chopper Driven by 4kW Motor. Tote lifter (Max 150 kg) and 2 off stainless steel totes. Click on the link below to see a video of the machine running. Isdjx Rylnjpfx Ah Nstb Specifications: Bowl Volume: 52.8 gal Motor Power: 14.8 hp Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 5.362 HP Of Unit: 14.751 Weight: 150 Dimensions: 1000mm x 650mm Diameter

Condition: used, Unused DGM Environmental Technologies model DGH 500/600 granulator. Has approximately 636mm x 615mm feed opening. Unit has (5x2) knives fitted to rotor which measures approximately 500mm diameter x 600mm wide. Includes (2) stator knives and (1) block knife for wedge. Unit is driven by 55kw, 400volt, 50hz, 1480rpm motor. Unit has 10mm bottom screen fitted. Unit has hydraulic powerpack driven by 0.75kw, 400volt, 50hz, 1383rpm motor. Includes double bag off system with 7.5kw blower. Unit includes control panel. Also includes spare blades, rotor, stator and block. Isdpfx Asx Rykkjh Nstb

Condition: used, Used GEA Westfalia model FSD 1-06-107 stainless steel disc bowl centrifuge. Clarifier design with total capacity 1 litre and solids holding space 0.5 litre. Heavy liquid 1.0 kg/dm3 and solids 1.4 kg/dm3 solids. Maximum speed rated 10,000rpm. Centripetal pump output up to 300 l/h depending on medium. Belt driven by 1.1 kW 220/380 volt 3/50 3,000 rpm motor. Mounted on skid with HMI control panel and stainless steel collection pot. New 2018. Itsdsx Ryi Tjpfx Ah Njb

Condition: used, pressure 125 t chamfer lenght 3550 mm distance between columns 3050 mm stroke 250 mm table width 120 mm table height 900 mm column arm 320 mm return speed 100 mm/sec working feed 10 mm/sec control Cybelec DNC 70 quantity of oil ca. 250 l total power requirement 11 kW weight of the machine ca. 11 t dimensions of the machine ca. 4 x 2 x 3 m * new control Cybelec CypTouch 12 - 3 axes Isdpfx Askpwuboh Notb * Hydraulic tool clamp * Crowning * Swivel control, right front * free-moving foot control * lateral protective device (protective grille) * rear protective device (protective grille) Machine is available in about 1-2 months !!

Condition: used, Year of construction: 2021, plate thickness 1.25 mm throat 250 mm distance between roll centers 62.0 mm engine output 0.7 kW Iedpfxjxaaccs Ah Nstb weight 170 kg range L-W-H 700 x 600 x 1300 mm Exhibition machine from 2021 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - 4x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Condition: ready for operation (used), pressure 125 t chamfer lenght 3050 mm distance between columns 2550 mm ajustment speed 90.0 mm/sec working feed 10.0 mm/sec return speed 75.0 mm/sec stroke 140 mm dayligth 375 mm column arm 250 mm table width 90.0 mm work height max. ca. 950 mm Number of working hours 14.100 h total power requirement 13.5 kW weight 8500 kg range L-W-H 3630 x 2300 x 2505 mm From a maintenance workshop Good / well-maintained condition With only approx. 14.100 operating hours (!!) - in checked conditions - machinevideo - ?v=wtEBQ0UawQ8 Equipment: - CNC electro-hydraulic press brake - DELEM CNC control - model "DA 58" * Swiveling control panel, front left * 2D graphic programming & product display * Tool & program library - CNC-controlled axes: * Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning - CNC electro-motorized backgauge (X axes) * Stop system with 2x CNC-controlled gantries - CNC electro-motorized height adjustment of the backgauge (R axes) - CNC electro-motorized adjustment of the stop fingers (Z axes) - Manual upper tool clamping - Manual lower tool clamping - Various split upper and lower tools - 2x stable, movable Front support arms - 1x freely movable 2-hand/foot control - Side guard (swinging doors) - Rear guard (swinging door) Itodpfx Asxabk Ijh Neb - Original operating instructions + control unit - Manufacturer's CE declaration

Condition: as good as new (ex-display), Year of construction: 2022, tube diameter 2" x 3.91 mm GAS tube diameter 60.3 x 4.5 mm ST tube diameter 60.3 x 5.4 mm ALU bar material - diameter 35.0 mm revolutions per minute 2.0 U/min radius min. 2 x D mm bending radius min. 10.0 mm bending radius max. 270 mm external diameter min. 5.0 mm external diameter min. 1/8 Zoll voltage 400 V total power requirement 1.5 kW weight 141 kg range L-W-H 470 x 1050 x 640 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours Iodpfx Aexaa N Aoh Netb Current new price approx. €9.000 Special price upon request Furnishing: - mandrelless tube bending machine - mechan. Angle adjustment via dial - Tool holder: hexagonal 40 mm + 50 mm - Bending angle: 0 ° to 180 ° (max. 210 ° angle of rotation) - Bending radius: R10 to R270 mm - integrated chassis BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: used, marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: Prism block for marking plate, clamping plate, straightening bench ... 9 pieces -Prism width: 100 mm -Dimensions: 9x 240/125/H63 mm -Dimensions: see photo technical drawing -Delivery/Price: complete -Transport dimensions: 240/250/H190 mm -Total weight: 83.1 kg Iodpfx Aju T Tqroh Notb

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg Isdpfx Ahsnzpx Rj Nstb

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, round cylinder -Manufacturer: Festo, standard cylinder type DSNU-32-125-PPS-A with proximity switch -Stroke distance: 75 mm -Piston: Ø 32 mm -Piston rod: Ø 10 mm / M 10 x 1.25 -Proximity switch: 2 pieces, see photos -Quantity: 4x cylinders available -Price per piece -Dimension: 200/40/H60 mm Iodpfxjqv Hqgs Ah Nstb -Weight: 0.4 kg/pc.

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.75 kW -Speed range: 12.5 to 125 rpm -Motor: adjustable -Construction: B3 Iodpedfglfjfx Ah Netb -Diameter shaft: 20 mm -Height shaft axis: 80 mm -Number: 1x available -Dimensions: 475/260/H220 mm -Weight: 40 kg

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks Itedpfx Ahsgnzxfj Njb -Forklift tines: 2 pieces/1 pair -Length: 920 mm -Cross-section: 125 x 40 mm -Photography: see technical drawing in the photos -Dimensions: 1070/600/H125 mm -Weight: 136 kg

Condition: used, Power cable, solar cable, fiber optic cable, fiber optic line, data cables, LAN cables, fiber optic cables -Manufacturer: Lapp Kabel, fiber optic cable -Type: Hitronic HQN1500 4G 50/125 OM2 -Application area: outdoor -Length: 147 m -Price: complete -Dimensions roll: Ø 900 x 485 mm -Weight: 25 kg Itodpfx Ahsgul S Rs Nsb