Used Adige Sc 425 for sale (15)

Year of construction: 1991, Condition: ready for operation (used), Saw blade Ø: 425 mm Cutting range at 90° round: 145 mm Cutting area at 90° rectangle: 340 x 50 mm Cutting speed: 13 - 210 m/min Drive motor: 380 V, 1.3/2.6 kW Njlhjkx Enaocdwzjwd Required space: 1000 x 950 x 1770 mm Weight: 810 kg

Year of construction: 1995, Condition: good (used), machine/vehicle number: 64950014, Technical data: -Saw flaked diameter up to 350 mm -Cut range at 90 ° -around 110 mm -four-edged 100 mm -rectangle 180 x 40 mm -or 160 x 85 mm -at 45 ° -around 110 mm -four-edged 100 mm -Walking adjustable Li + Re ever 0-90 ° -2 cutting speeds 16 + 32 m/min -Drive 400 V/1.2/1.8 kW -Feed speed of the saw blade hydr. infinitely controllable -Coolant equipment Njlhjd Nrhwecdwzjwd -Supplusion – roller duct 3000 mm -Rebuff – roller duct with measure 3000 mm -Space requirements approx. B 650 x H 1650 x T 900 mm -Weight approx. 750 kg

Condition: excellent (used), Year of construction: 2017, The aluminum cutting machine is in good technical condition. Nolev Sm U Tehcdwzswd Dimensions l x w x h: 14.355 x 2728 x 2097mm Weight: 9650kg It comes with a wide range of tools and spare parts. The machine comes with a Losma chip separator. After prior arrangement, a viewing in operation is possible. Kwjb Azc Rsv H T Ics Aljw The BLM BC80 CUTTING & END-FINISHING SYSTEM is a unique machine designed to maximize productivity in end machining operations for tubing up to 3.125" (80MM) in Diameter. Combining the performance of a dual spindle turning center with the speed of a sawing operation the system can cut, face and chamfer spacers, bushings, rod and bar stock and perform that operation extremely quickly. Capable of outputting up to 2,200 parts per hour the BLM BC80 is second to no other system in its dedicated focus. BC80 is both the highest performing and cost-effective machine on the market designed for round the clock production of bushings up to 80 mm (3.15”) diameter and lengths from 10-350 mm (0.4” to 13.75”) Separate collection of end-pieces and swarf - chips and scrap drops managed separately Tube surface is protected from scratches All tube diameter changeover adjustments done from a single location User-friendly graphical interface The finished part unloader has a two-position separator that can be used when changing collection bins or to segregate scrap Dynamic washing / flushing of the finished components Tool wear monitoring In-process part measurement and 100% part inspection including detailed reporting

Condition: excellent (used), Year of construction: 2017, operating hours: 869 h, Functionality: fully functional, machine/vehicle number: 00809, laser power: 2,000 W, sheet thickness aluminum (max.): 6 mm, Equipment: cooling unit, Ref. no. 00809 INSTALLATION ALMOST AS NEW - not even 1000 operating hours on it Description 3D FIBER laser cutting machine Made BLM ADIGE Type LT Free Njlhcer In Nnedwzowd Year 2017 Axis of the laser head 5 axes Laser power 2000 Watt Working hours (15.04.2024) 869 h With Chiller With Exhaust equipment made Sideros installation area: approx. 24qm without extraction and cooler Length: 5.50M Width: 3.70M Height: 4M (Cooler and extraction next to each other, length 3M, width 1.70M, height 2.70M) So far customer has only cut 4mm stainless steel. (According to the manufacturer you can cut thicknesses up to 6mm. Previously the machine was used to process stainless steel housings Without software - (customer uses internal company software) Supply voltage 400V +-10% Power consumption 16 kVA Technical condition: The laser is in very good technical condition Maintenance was carried out ourselves With documentation Delivery date Immediately after arrangement

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, total length: 10,500 mm, total height: 1,500 mm, total width: 2,500 mm, input voltage: 380 V, input frequency: 50 Hz, power: 6.9 kW (9.38 HP), ADIGE TT640 automatic tube cutting machine Adige saw model TT 640. Only straight cuts, for steel or non-ferrous tubes from 10 to 80 mm in diameter. (even a few mm more). Equipped with automatic belt loader for bars up to 6.50 m in length per tube bundle. Front cut up to approximately 3000 mm and in the rear part for lengths up to 1500 mm. Automatic feed management panel. High production capacity and fully automatic tube cutting machine. Simple and fast circular blade assembly In perfect working order. Nelov Hrnhehcdwzjwd Complete with manual

Condition: good (used), Year of construction: 2015, Pipe processing center Manufacturer: ADIGE Type: EM 80 Year of manufacture: 2015, read operating hours (h): 26,397 Connection values: 380 V Own weight: 8,500 kg, with SIEMENS control, side bar loading magazine, length: approx. 650 cm, with LEUZE laser protection, cutting station, saw head, measuring system for length detection, with VASCA drum filter system, year of manufacture: 2014, No.: 8-14-1923, Own weight: 450 kg, chip conveyor 85645-70, Njlhcdski Twqjwzewd Year of manufacture: 2015, own weight: 685 kg EM80 Integrated solution for cutting and machining at the ends of pipes and Bars CNC tube cutting machine for drilling complex profiles One machine, many possibilities The EM80 is a combined sawing and machining center for tubes and bars. It combines the flexibility of a lathe with the productivity and robustness of a transfer machine. It offers very high performance and is easy to program. It is specialized in the continuous, even unmanned, production of metal parts to be machined at the ends. Perfect for the automotive industry and for the production of pneumatic and hydraulic components. Discover your configuration among the many possibilities Cutting, tube machining and sinking EDM, CNC turning, tapping, drilling and radial milling.

Year of construction: 2012, Condition: ready for operation (used), - USED - CO2 TUBE LASER CUTTING MACHINE WITH LOADING/UNLOADING SYSTEM MIN CIRCULAR SECTION: ø12 mm MAX CIRCULAR SECTION: ø220 mm MAX SQUARE SECTION: 200x200 mm MAX ADMITTED LOAD: 35 Kg/m SOURCE: ROFIN DC 030 ; 3000 W CONTROL UNIT: SIEMENS 840D WEIGHT: 10500 Kg Nwjlsvzc Egshcdwzjd NOTE: MAX LOADING LENGTH 8500mm; MAX UNLOADING LENGTH 6500mm; 3D HEAD; WELD INSPECTION SYSTEM

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, Control: SIEMENS CNC control for 8 CNC axes Machine description and equipment  Tube laser cutting system for laser processing of steel, stainless steel and aluminum tubes and aluminum *Round tube diameter 12 - 140 mm *Square tube from 12 x 12 mm to 120 x 120 mm *Rectangular flat oval tube 10 - 140 mm side 110 mm Maximum side difference in 170 mm diameter Circle inscribed Precitec AK-HP cutting head holder  LT main system module  Automatic bundle storage for tubes with a length of 3200 to 6500 mm Capacity 4000 kg  Loading equipment for sensitive tubes (up to 6500 mm)  Shortened length version of the system layout  Main module support unloader  Unloading device main module with short section conveyor, with plastic belt  Unloading device additional module for unloading parts up to 3500 mm long on the front side and up to 3000 mm long parts on the rear side  Diffusion-cooled laser source ROFIN SINAR DC 025 Compact Profibus  Integration of the ROFIN SINAR DC 015-020-025 Compact laser source with the LT tube laser cutting system  Cooling unit with closed circuit and connection system for ROFIN DC 020-025 laser source (built in 2009)  Fine dust filter and extraction system  PRECITEC AK-HP focusing head (year of manufacture 2009)  PRECITEC AK-HP 3.75" interchangeable cassette  PRECITEC AK-HP 5" interchangeable cassette  High-pressure lens ZN-SE 3.75"  High-pressure lens ZN-SE 5"  Remote Diagnosis Host Software for remote diagnosis  Optical weld seam detection and pipe positioning device  Laser machine equipment for loading and cutting open profiles (flat, L, C and U profiles)  Tubework LT 712 D, integrated parametric 3D CAD-CAM tube processing software  Post Processor Tubework-LT 712 D with X-Y function for cylindrical holes on round tubes round tubes  Extraction system  Booster device for optimum laser grooving  Remote diagnosis package with 56 K modem and Remote Diagnosis Host software (Teleser remote diagnosis service)  PC software for determining cycle times, energy and cutting gas consumption  Mounting elements, base plates  Various spare parts  Lifting gear for loading the machine Nelhcjtphibedwzswd  Documentation

Condition: ready for operation (used), Year of construction: 2013, operating hours: 50,000 h, Functionality: fully functional, laser power: 2,000 W, travel distance X-axis: 6,500 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 95 mm, pipe diameter: 120 mm, travel distance W-axis: 85 mm, swivel angle A-axis (max.): 360 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-tube axis: 6,500 mm Y-beam guidance axis: 170 mm Z-beam guidance axis: 95 mm A rotation axis (chuck): n x 360° A1 rotation axis (steady rest): n x 360° W unloading piece support: 85 mm Control: Siemens Sinumerik 840D Operating hours: approx. 50,000 h Speeds X-tube axis: 90 m/min Y-beam guidance axis: 30 m/min Z-beam guidance axis: 22.5 m/min A rotation axis (chuck): 750°/s A1 rotation axis (steady rest): 750°/s Accuracy Position accuracy of interpolated axes: ± 0.05 mm Reproducibility: ± 0.03 mm Position deviation: ± 0.1 mm Workpiece dimensions Max. raw material length: 6,500 mm Min. remaining tube length: 160 mm Nelhcdjvy Am Iewzewd Length of finished part: 4,500 mm Min. tube diameter: 12 mm Max. outer circle diameter: 120 mm Min. edge length for rectangular and square tubes: 12 mm Max. circle diameter for labeled rectangular/flat oval tubes: 140 mm Max. weight of workpiece: 13.5 kg/m Laser source Manufacturer: Rofin Sinar Model: DC020 Max. laser power: 2,000 W Beam mode K-factor: >0.9 Sheet thickness Sheet thickness mild steel (O2): 6 mm Sheet thickness stainless steel (N2): 4 mm Sheet thickness aluminum alloy (N2): 3 mm Consumption values Laser gases: Premix gas bottle in the laser source (replace every 12-18 months) Cutting gas consumption: O2 or N2, depending on material and part geometry Electrical consumption: 20 - 40 kW/h (varies depending on material and geometry) Compressed air consumption: 30 Nm³/h

Condition: good (used), Functionality: fully functional, overall weight: 22,000 kg, empty load weight: 5,000 kg, maximum load weight: 17,000 kg, axle configuration: 2 axles, loading space length: 8,250 mm, loading space width: 2,480 mm, loading space height: 800 mm, first registration: 05/1993, suspension: air, tire size: 315.80 r 22.5, color: green, Year of construction: 1993, adige trailer, 2 axles with 80cm high sides, air suspension, 8.25m sheet metal platform with a useful load, total 9.95m with drawbar, tool box, side winches, cycle guard, year 1993, automatic bell, INTERDRIVE SRL-PARMA Nwelhcdjvrdp Uowzsd

Condition: used, Year of construction: 2013, Functionality: fully functional, ADIGE LT120 laser for sale! Technical specifications Machine CNC working axes: X tube axis 6500 mm Y beam guidance axis 170 mm Z beam guidance axis 95 mm A rotary axis (chuck) n x 360° A1 rotary axis (steady rest) n x 360° W unload piece support 85 mm Speeds: X tube axis 90 m/min Y beam guidance axis 30 m/min Z beam guidance axis 22.5 m/min A rotary axis (chuck) 750°/s A1 rotary axis (steady rest) 750°/s Accuracy: Position accuracy interpolated axes ± 0,05 mm Repeatability ± 0,03 mm Position deviation 1) ± 0,1 mm Work piece dimensions: Max. raw material length 6500 mm Nolhcdoupzbfswzswd Min. remaining tube length 160 mm Finished part length 4500 mm Min. tube diameter 12 mm Max. outer circle diameter 120 mm Min. edge length on rectangular and square tubes 12 mm Max. circle diameter for inscribed rectangular/flat oval tubes 140 mm Maximum work piece weight: Raw material and finished part 13,5 kg/m Control Siemens Sinumerik 840D: RAM 256 MB Color monitor TFT 10,4“ Hard disk memory 10 GB for NC programs PCU with Windows Laser Rofin Sinar DC020 Max. laser power: 2000 W Max. sheet thickness: Mild steel (O2): 6 mm Stainless steel (N2): 4 mm Aluminum alloy (N2): 3 mm Beam mode: K-factor >0.9 Consumption values: Laser gases: Premix gas bottle inside the laser source. Bottle substitution every 12-18 months, according to working hours. Cutting gases O2 or N2 consumption depends on cut material and part geometry. Complete unit electrical consumption: 20 - 40 kW/h all included varies according to the cut material and part geometry. Compressed air consumption: 30 Nm³/h

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, Tube laser cutting system for laser processing of steel, stainless steel and aluminum tubes TECHNICAL DETAILS Control: SIEMENS CNC control for 8 axes Round tube diameter: 12 - 140 mm Square tube: 12 x 12 - 120 x 120 mm Rectangular flat oval tube: 10 - 140 mm (110 mm maximum side difference in 170 mm diameter) Cutting head holder: Precitec AK-HP Bundle storage: automatic, for pipes with a length of 3200 to 6500 mm Loading capacity: 4000 kg Loading equipment for sensitive tubes: up to 6500 mm Laser source: ROFIN SINAR DC 025 Compact Profibus, diffusion-cooled (Integration of the ROFIN SINAR DC 015-020-025 Compact laser source with the LT tube laser cutting system) Year of manufacture laser source: 2009 MACHINE DETAILS Operating voltage: 400 V/50 Hz Total power requirement: 26 kW Fuse protection: 100 kA Control voltage: 24 V Nwelst Dkqxjhcdwzsd Space requirement: 15 x 5 m Machine weight: 9000 kg EQUIPMENT - LT main system module - Shortened length version of the system layout - Support unloader main module - Unloading device main module with short parts conveyor, with plastic belt - Unloader additional module for unloading parts up to 3500 mm long on the front side and up to 3000 mm long on the rear side - Cooling unit with closed circuit and connection system for ROFIN DC 020-025 - Fine dust filter and extraction system - PRECITEC AK-HP focusing head (year of manufacture 2009) - PRECITEC AK-HP 3.75" exchangeable cassette - PRECITEC AK-HP 5" interchangeable cassette - High-pressure lens ZN-SE 3.75" - High-pressure lens ZN-SE 5" - Remote Diagnosis Host Software for remote diagnosis - Optical weld seam detection and pipe positioning device - Laser machine equipment for loading and cutting open profiles - (flat, L, C and U profiles) - Tubework LT 712 D, integrated parametric 3D CAD-CAM tube processing software - Tubework-LT 712 D post processor with X-Y function for cylindrical holes on round tubes - round tubes - Extraction system - Booster device for optimum laser grooving - Remote diagnosis package with 56 K modem and Remote Diagnosis Host software (Teleser remote diagnosis service) - PC software for determining cycle times, energy and cutting gas consumption - Set-up elements, base plates - Various spare parts - Lifting gear for loading the machine - Documentation

Condition: good (used), Functionality: fully functional, overall weight: 38,000 kg, empty load weight: 4,300 kg, maximum load weight: 33,700 kg, axle configuration: 3 axles, loading space length: 9,250 mm, loading space width: 2,550 mm, first registration: 08/2016, suspension: air, color: red, tire size: 385.65 r 22.5, Year of construction: 2016, Equipment: ABS, Sem container carrier ralletta 3 axle disc with 3rd steerable axle, 3 twist crossbars x the shelter of 20 balanced -30 flush rear and tank container, full ADR , air suspension, year 2016, overhauled until 31.07.2025-CONCESSIONARY INTERDRIVE SRL-PARMA Njlhcjuzvrqodwzswd

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, Tube laser cutting system for laser processing of steel, stainless steel and aluminum tubes TECHNICAL DETAILS Control: SIEMENS CNC control for 8 axes Round tube diameter: 12 - 140 mm Nwjlhcjtwby Sjdwzod Square tube: 12 x 12 - 120 x 120 mm Rectangular flat oval tube: 10 - 140 mm (110 mm maximum side difference in 170 mm diameter) Cutting head holder: Precitec AK-HP Bundle storage: automatic, for pipes with a length of 3200 to 6500 mm Loading capacity: 4000 kg Loading equipment for sensitive tubes: up to 6500 mm Laser source: ROFIN SINAR DC 025 Compact Profibus, diffusion-cooled (Integration of the ROFIN SINAR DC 015-020-025 Compact laser source with the LT tube laser cutting system) Year of manufacture laser source: 2009 MACHINE DETAILS Operating voltage: 400 V/50 Hz Total power requirement: 26 kW Fuse protection: 100 kA Control voltage: 24 V Space requirement: 15 x 5 m Machine weight: 9000 kg EQUIPMENT - LT main system module - Shortened length version of the system layout - Support unloader main module - Unloading device main module with short parts conveyor, with plastic belt - Unloader additional module for unloading parts up to 3500 mm long on the front side and up to 3000 mm long on the rear side - Cooling unit with closed circuit and connection system for ROFIN DC 020-025 - Fine dust filter and extraction system - PRECITEC AK-HP focusing head (year of manufacture 2009) - PRECITEC AK-HP 3.75" exchangeable cassette - PRECITEC AK-HP 5" interchangeable cassette - High-pressure lens ZN-SE 3.75" - High-pressure lens ZN-SE 5" - Remote Diagnosis Host Software for remote diagnosis - Optical weld seam detection and pipe positioning device - Laser machine equipment for loading and cutting open profiles - (flat, L, C and U profiles) - Tubework LT 712 D, integrated parametric 3D CAD-CAM tube processing software - Tubework-LT 712 D post processor with X-Y function for cylindrical holes on round tubes - round tubes - Extraction system - Booster device for optimum laser grooving - Remote diagnosis package with 56 K modem and Remote Diagnosis Host software (Teleser remote diagnosis service) - PC software for determining cycle times, energy and cutting gas consumption - Set-up elements, base plates - Various spare parts - Lifting gear for loading the machine - Documentation

Condition: good (used), Functionality: fully functional, overall weight: 39,000 kg, empty load weight: 4,400 kg, maximum load weight: 34,600 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,550 mm, first registration: 06/2018, suspension: air, color: yellow, tire size: 385.65 r 22.5, Year of construction: 2018, Equipment: ABS, semi-trailer adige ralletta container carrier 20 feet tipping,3 axles disc with 1st liftable, ebs, front tipping cylinder x only 20 feet, ADR complete, air suspension, year 2018, overhauled until 31.08.2024-CONCESSIONARIA INTERDRIVE SRL-PARMA Nwjlhcdwstt Dpgszsd