Used Adk 125 Modell for sale (20,711)

Condition: excellent (used), functionality: fully functional, total height: 1,855 mm, table width: 400 mm, table length: 550 mm, overall weight: 225 kg, MAXION UNIMAX 3 Pillar Drilling Machine Technical data: * Manufacturer: MAXION * Model: UNIMAX 3 Itedpfjzvy Tgex Ah Eol * Machine type: Pillar drilling machine * Mains connection: 400 V / 50 Hz * Motor power: 0.8 / 1.5 kW, pole-switching * Spindle taper: MK 3 * Continuous drilling capacity in steel E335: 3–25 mm * Normal drilling capacity: up to 30 mm * Thread cutting: M4–M20 * Drilling depth: 125 mm * Overhang: 260 mm * Spindle/table distance: 90–840 mm * Table size: 550 × 400 mm * T-slot width: 14 mm * Column diameter: 110 mm * Speed range A: 80–1,440 rpm * Speed range B: 180–3,200 rpm * Speed: continuously variable * Overall height: approx. 1,855 mm * Weight: approx. 225 kg

Condition: like new (used), functionality: fully functional, Weiler Primus Lead and Pull Spindle Bench Lathe – Like New Condition!!! Technical Data: >> Year of manufacture approx. 1990, machine no. 4472 >> Center height 120 mm >> Distance between centers 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle bore 23 mm Itjdsz A Tgqepfx Ah Ejl >> Short taper spindle head DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: Metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 three-jaw chuck, 125 mm, like new, with 2 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increasing in 1 mm increments >> Mulifix size A with 3 steel holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Operating manual, electrical diagrams, and much more About the machine: A Weiler Primus Lead and Pull Spindle Bench Lathe with a workbench is offered in like-new condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This Primus model comes from the German Armed Forces, where it was used very little (almost new). This newer generation of Weiler lathes is very user-friendly and can produce surfaces that are as smooth as if they were ground. Take advantage of the opportunity to inspect this machine on-site and under power to convince yourself of its condition. Digital display available for an extra charge.

Year of construction: 2017, condition: ready for operation (used), laser power: 600 W, Automation system manufactured in 2017. This CLEANLASER CL 600 features a laser wavelength of 1064 nm. With 3 units available, this system is designed for precision applications. If you are looking to get high-quality automation capabilities, consider the CLEANLASER CL 600 machine we have for sale. Contact us for further details. Iodez Aq Hqspfx Ah Eotl - 3 units available- Main Laser System Model: CL 600- Laser Power (max. av.): 600 W- Wavelength: 1064 nm- Pulse Frequency: 20-40 kHz- Pulse Duration (min.): 45 ns- Pulse Energy (max.): 33 mJ- Laser Safety Class: Class IV Laser Product- Main System Power Supply: 3x400 VAC, N, PE- Main System Frequency: 50 Hz / 50/60 Hz (correspond to separate units)- Main System Power Consumption: 10 kVA- Optic System Model: intelliSCAN 30- Optic Wavelength: 1064 nm- Optic Work Distance: 250 mm- Hydraulic Pump Drive Motor Brand: Leroy-Somer- Hydraulic Pump Drive Motor Weight: 490 kg- Hydraulic Pump Drive Motor Output: 90 kW (50 Hz, 1460 min-1) / 103 kW (60 Hz, 1780 min-1)- Hydraulic Pump Drive Motor Voltage / Connection: A380V / A400V / Y690V (50 Hz), A415V / A440V / A460V (60 Hz)- Hydraulic Pump Drive Motor Rated Current: 170A / 162A / 94A (50 Hz), 159A / 168A / 161A (60 Hz)- Hydraulic Pump Drive Motor Protection Class: IP 55- Hydraulic Pump Drive Motor Max Ambient Temperature: 40 °C- Hydraulic Pump Brand: Brueninghaus Hydromatik GmbH (The Rexroth Corp.)- Hydraulic Pump Displacement (Vg): 125 cc- Hydraulic Pump Nominal Speed (n): 1800 rpm- Hydraulic Pump Pressure (DR): 276 bar- Hydraulic Pump Fluid Type: mineraloil- Package sale possible (, )

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: M0616326, We are selling an extraction system including many associated ducts. The extraction unit is in good condition and has only seen limited use. Manufactured by Coral SPA, Italy, model PRN630, equipped with a powerful 37 kW motor. Suction duct diameter 600 mm: - 1970 mm, eight pieces - 1520 mm, one piece - 980 mm, two pieces - 500 mm, three pieces - 90° elbow, two pieces - 45° elbow, two pieces With branches: - 140 mm diameter, 500 mm length, one piece - 220 mm diameter, 500 mm length, one piece - 260 mm diameter, 500 mm length, two pieces Reducer from 600 mm to 450 mm, one piece Suction duct diameter 450 mm: - 1970 mm, three pieces - 990 mm, two pieces - 500 mm, one piece Itodeyx Dhcjpfx Ah Ejl - 90° elbow, two pieces Suction duct diameter 350 mm: - 1979 mm, three pieces - 1500 mm, one piece Distributor, 500 mm x 250 mm, one piece - 500 mm length, 125 mm diameter, one piece 45° elbow, four pieces Reducer from 450 mm to 350 mm, one piece The extraction system can be inspected by appointment. Pickup or shipment by truck available.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,328 h, functionality: fully functional, machine/vehicle number: 11180000573, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,250 mm Ijdpfx Aozxf Inoh Eetl Travel range Y-axis: 880 mm Travel range Z-axis: 800 mm C-axis indexing: 360° (0.001°) Feed rate: 40 m/min Rapid traverse: 40 m/min Number of pallets: 1 Pallet dimensions, diameter: 1,000 mm Max. workpiece weight: 1,000 kg Max. torque: 7,900 Nm Max. spindle speed: 18,000 rpm Spindle drive power: 15 kW at 40% duty cycle Spindle drive power: 10 kW in continuous operation Tool interface: CAT 40 Number of tool positions in the magazine: 60 Tool changer: Double gripper MACHINE DETAILS CNC control: 3D contouring control MillPlus Total power consumption: 55 kVA Coolant tank capacity: 600 l Dimensions (L x W x H): 7,000 x 3,500 x 3,902 mm Operating hours Hours under power: 33,831 h Spindle operating time: 6,328 h EQUIPMENT Electronic handwheel Chip conveyor Internal coolant supply Rotating viewing windows Flushing gun Preparation for Renishaw probe Accuracy package Preparation for internal cooling with 40/80 bar Paper band filter

Condition: good (used), Year of construction: 1979, functionality: fully functional, spindle mount: MK 3, For sale is a pillar drilling machine from the brand Alzmetall in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Alzmetall • Model: AB3-E • Speed: approx. 125 - 3,150 rpm • Spindle stroke: approx. 180 mm • Table size: approx. 520x400 mm • Year of manufacture: 1979 • Weight: approx. 360 kg • Coolant pump can be connected • Condition: Used, functional Isdpfx Ahozvrmle Estl The machine can be inspected and tested at any time! Shipping costs via freight forwarder: approx. €190 International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale ex works 42855 Remscheid, free loading. Errors in technical data and prior sale reserved.

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00690, load capacity: 125 kg, arm reach: 3,005 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/125L manufactured in 2011.11. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/125L Model Number: A05B-1329-B261 Year of Manufacture Robot: 2011.11 Warranty term (months): 12   Payload (kg): 125 Reach (mm): 3005 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1190   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2011.11 RCC Length (m): 7 Itsdpfx Ahoz Atr No Eel   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10    

Condition: used, Used pin mill by Jehmlich (Germany) model Rekord D, designed in carbon steel. Mill body made of cast iron. Unit has milling discs with a diameter of 610 mm made of carbon steel. Mill has one fixed and one rotating milling disc driven by a belts driven with an ex proof electric motor with a power of 20 kW, 2940 rpm, 380 V, 50 Hz. Machine is equipped with a stainless steel feeding hopper and bottom unloading. Under the mill outlet is installed a screw conveyor constructed as follows: stainless steel chamber and a galvanized carbon steel screw driven by a gearbox and electric motor with power of 0,75 kW, 3-phase, 50 Hz with an operating speed of 125 rpm. Whole thing is mounted on a frame made of carbon steel. Itsdpsygvpasfx Ah Esl Specifications: Horsepower: 20 kW Material Of Construction: Cast iron and carbon steel Type Of Mill: Pin mill

Year of construction: 2012, condition: excellent (used), functionality: fully functional, machine/vehicle number: A0008858, Used Verderer VA25S-A01AS2SSSSPTPT Air-Operated Double Diaphragm (AODD) pumps with stainless steel configurations., serial number: A0008858; year of manufacture: 2012. Very good condition The specific arrangement code you provided (VA25S-A01AS2SSSSPTPT) designates a heavy-duty metallic pump constructed with a Stainless Steel fluid section, Stainless Steel seats, and PTFE (Teflon) balls and diaphragms, and defines a heavy-duty, highly corrosion-resistant configuration of the Verderair VA 25 Air-Operated Double Diaphragm (AODD) pump. This specific model is typically engineered to handle aggressive chemicals, strong acids, solvents, and high-temperature fluids The operating limits and physical profile for the Verderair VA 25 SS SS TF TF include the following parameters: Connection Size (Liquid):1" BSP or NPT (Threaded) Connection Size (Air): 1/2" NPT Maximum Flow Rate: 189 liters per minute (50 GPM) Maximum Discharge Pressure: 8.6 bar (125 PSI) Maximum Fluid Temperature: 104°C (220°F) Limited by the PTFE components Maximum Suction Lift (Dry): 3.0 to 4.9 meters Maximum Suction Lift (Wet): 6.0 to 8.8 meters Maximum Particle Size: 3.2 mm (Solids handling capacity) Pump Weight: approx. 16.5 to 18.8 kg (heavy due to full-metal construction) Iodpfx Aez Abcpoh Eotl Certifications: ATEX certified (safe for explosive atmospheres) Dimensions: L 470 mm x W 250 mm x H 360 mm SS (Fluid Section): 316 Stainless Steel housing and manifolds. Provides high chemical resistance and mechanical durability; SS (Air Section / Check Valve Seats): Depending on the generation, this represents a heavy-duty Stainless Steel center air section or Stainless Steel valve seats. It avoids the corrosion or cracking risks associated with aluminum or plastic components in harsh environmental conditions; TF (Check Valve Balls): PTFE (Teflon) check balls. Ensures a tight seal and broad chemical compatibility during cycling; TF (Diaphragms): PTFE (Teflon) diaphragms (typically backed by an EPDM layer for flexibility). PTFE offers the highest level of universal resistance to corrosive fluids; Price 2.490 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Feutron Temperature Test Chamber: -40 to +100°C Thanks to its robust construction, the Feutron TPK 3403/125 is a workhorse for standardized temperature testing. The primary areas of application for this model are: 1. Electronics and Component Testing This is the most common area of ​​application. It focuses on how components react to extreme temperatures: Functional Testing: Does the circuit board continue to operate flawlessly even at -40°C or +150°C? Burn-In Testing: Artificial aging of components through continuous operation at high temperatures to induce early-stage failures. 2. Materials Testing Investigation of physical changes in materials: Brittleness: Do plastics or rubber seals become brittle in cold conditions? Deformation: Do composite materials warp when exposed to heat? Storage Testing: How stably do chemical substances or adhesives behave over extended periods at a constant temperature? 3. Quality Assurance (QA) Sample Testing: In-process testing conducted alongside production to ensure that manufacturing output adheres to specified temperature ranges. Standards Compliance Testing: Conducting tests in accordance with common industry standards (e.g., DIN EN 60068) that prescribe specific temperature profiles. 4. Research & Development Prototyping: Testing new housing designs or materials under controlled thermal conditions prior to mass production. Manufacturer: Feutron Model: TPK 3403/125 Temperature Range: -40 to +100°C Refrigeration System: Air-cooled condenser Temperature Stability: approx. ±0.1 to ±0.5 K Usable Chamber Volume: approx. 125 liters Refrigerant: R22 Operating Pressure: 23 bar Power Supply: 220/280V-3-50Hz Input Fuse Rating: 25 A Protection Class: IP 20 Weight: 480 kg Itsdey Nynajpfx Ah Eel "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find additional items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Important note: “The table shown in the photos is not included in the sale.” Condition: used Ijdpfxozimcbe Ah Ejtl Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, Make: Diosna Model: SP 200 AD Machine number: 8810-108 3-phase Includes 2 x large tilting mixing bowls Flour capacity: 125 kg Itsdpfxezuyd Ao Ah Eel Dough capacity: 200 kg

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00653, load capacity: 125 kg, arm reach: 3,100 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/125L manufactured in 2016.11. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iC/125L Model Number: A05B-1333-B261 Year of Manufacture Robot: 2016.11 Warranty term (months): 12   Payload (kg): 125 Reach (mm): 3100 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1115 Ijdez Af Tfepfx Ah Eotl   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2016.10 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: good (used), Year of construction: 2014, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: P14ZYG488, Year 2014 with Fanuc series 31i Model B5 X/Y/Z: 500 x 400 x 330 mm 21-tool magazine with 4th axis TECHNICAL SPECIFICATIONS Table dimensions: 650 x 400 mm Maximum table load: 300 kg T-slots (3 slots, distance 125 mm): 14 mm X/Y/Z travels: 500 / 400 / 330 mm Table – spindle nose distance: 250 – 580 mm (with 100mm riser) Spindle axis – Z-axis guide distance: 380 mm Table height: 735 mm SPINDLE Spindle nose: 55 mm ISO 30 Spindle speed (standard): 100 to 10000 min-1 (opt. 24000 min-1) Acceleration time from 0 to 15000 min-1: 0.46 sec Time for reversal at 4000 min-1: 0.40 sec Maximum spindle torque (-1700 min-1): 78 Nm Continuous power: 3.7 kW (2800 – 8000 min-1) Power for 1 minute ED: 13 kW (1700-3500 min-1) Drilling capacity in steel: Ø 20 mm Milling capacity in steel: 70 cm3/min Tapping capacity in steel: M 12 Z-AXIS Ball bearing guide Cutting feed (AC servomotor 1.0 kW / Nm): 1 to 30000 mm/min Rapid traverse in X, Y, and Z: 54 m/min Rapid traverse: more than 1.5G TOOL MAGAZINE Tool type: ISO 30 according to DIN 69871A or BT30 Number of tools: 21 Tool change time: 0.8 sec. 2kg / 1.2 sec. 3 kg Chip-to-chip tool change time: 1.4 sec. Maximum tool diameter: 80 mm for maximum tool length 250mm Maximum tool weight: 2kg / 3kg at reduced speed Maximum weight of the 21 tools: 22 kg or 33 kg MACHINE TABLE / X-Y AXES Ball bearing guides New high-speed Fanuc alpha i motors AC servomotor 8i 2.5kW, 8Nm Rapid traverse in X and Y: 54 m/min on 30 mm Cutting feed: 1 – 30'000 mm/min Minimum input/output increment: 0.001 mm Positioning accuracy in X/Y/Z axis: ±0.002 mm FANUC 31i-B5 NUMERICAL CONTROL: 3 axes (option for 4th and 5th axis) Simultaneous linear interpolation up to 5 axes Work time per block: 15 sec. Memory capacity: 200 programs (512 KB) RS 232C and USB interface, Ethernet interface Flashrom card reader with editing functions Manual Guide i with assistance Itedpfxjzzxk Uo Ah Ejl CONNECTION Voltage: (3 phases) 400V ±5% Frequency: 50Hz ±1 Hz Nominal power: 20 kVA Compressed air: 5 bar minimum, 0.13 m3/min Fuse: 34 A min The technical details provided are given without guarantee, subject to error or omission.

Condition: good (used), Year of construction: 2000, operating hours: 69,000 h, functionality: fully functional, clamping force: 1,250 kN, screw diameter: 45 mm, For sale: injection moulding machine by KraussMaffei, model KM 125-700C2. The machine is fully functional and was in production until recently. Technical specifications: Year of manufacture: 2000 Operating hours: 69,000 h Clamping force: 125 t Itjdpfx Aox Ituqsh Esl Screw diameter: 45 mm Needle shut-off: Pneumatic Core pull: 2*Hydraulic Internal pressure sensor

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 9220212, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,000 rpm, workpiece weight (max.): 4,000 kg, TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,000 mm Z-axis travel: 1,000 mm B-axis rotation: 360° Iodpfx Ahezza U Ie Eotl C-axis rotation: 360° Spindle speed range: 40 – 2,000 rpm Tool holder: ISO 50 Main spindle power: 15 kW Number of axes: 3 Table length: 3,500 mm Table width: 800 mm Maximum workpiece weight: 4,000 kg MACHINE DETAILS Control system: Conventional Model: Bed milling machine with traversing table Dimensions & Weight Dimensions (L x W x H): 5,300 x 3,000 x 2,700 mm Shipping weight: 11,000 kg Number of shipping packages: 1 EQUIPMENT Digital display: Sony 3-A

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 230 mm, feed rate X-axis: 36 m/min, total width: 1,860 mm, total length: 3,500 mm, total height: 1,830 mm, number of planer blades: 4, power: 47.25 kW (64.24 HP), Offered for sale is a high-performance four-sided planer moulder manufactured by JKS & Trade Moravia s.r.o., model QMB623W – MBQ623W, purchased new in 2021. The machine has seen minimal use only for 2 years, as it was originally acquired for a production project that was not implemented. Technical Specifications: Iodpfx Ahoxup Ecj Eotl Working width: 18–230 mm Working thickness: 10–160 mm Feed speed: 7–36 m/min (adjustable) Tool diameter: 125 mm (max) Power supply: 400V / 50Hz / 3-phase Installed power: 47.25 kW Main fuse: 100 A Machine dimensions: 3500 × 1860 × 1830 mm Weight: 6,000 kg CE compliant The machine is fully operational, regularly maintained, and comes with original documentation, including the operator manual. Suitable for precise and efficient four-side profiling of solid wood components. 📍 Location: Czech Republic The machine is available for immediate inspection and dispatch. 📩 Please contact us for pricing, detailed photos, or to arrange a viewing.

Condition: excellent (used), functionality: fully functional, center height: 125 mm, grinding length: 600 mm, grinding diameter: 249 mm, control cabinet length: 1,200 mm, control cabinet width: 40 mm, grinding spindle speed: 1,530 rpm, control cabinet height: 1,500 mm, overall weight: 3,250 kg, For sale is a cylindrical grinding machine manufactured by Kellenberger. The machine is in very good condition. Make: Kellenberger Model: R 125x600 Technical Specifications: Centre distance: 600 mm Centre height: 125 mm Workpiece diameter: 249 mm Power requirement: 10 kW Table: Travel: 700 mm Travel per handwheel turn, coarse/fine: 20/2.5 mm Speed, hydraulically adjustable: 0.02–6 m/min Minimum reversing travel: 1.5 mm Dwell time at reversal, adjustable: 0–5 sec Swivel range: 11 degrees Cross slide: Travel with feed handwheel, coarse/fine: 220 mm Travel per handwheel turn, coarse/fine: 4/0.5 mm Rapid traverse and return, hydraulic: 50 mm Feed, electro-mechanical with stepper motor: 0–9.99 mm/Ø Micro-stop of feed, per graduation: 1 µm/Ø Plunge grinding: Feed rate coarse/fine: 1–49/0.2–2.8 µm/sec Grinding spindle head: Grinding wheel, diameter x width x bore: 500 x 80 x 203.2 mm Motor rating: 5.5 kW Grinding spindle speeds: 1220, 1360, 1530 rpm Isdsyyn Ehspfx Ah Eetl Workpiece spindle head: Swivel range: 360 degrees Speeds, steplessly adjustable: 20–400 rpm Spindle internal taper: Morse 5 Motor rating: 0.9 kW Tailstock: Quill internal taper: Morse 3 Quill travel: 30 mm Machine dimensions: 2800 x 1850 mm Weight: approx. 3000 kg

Condition: excellent (used), Year of construction: 2008, type of input current: three-phase, input voltage: 400 V, We offer this used Peerless HBF36 machine for the production of cardboard boxes, manufactured in 2008, in very good condition. Included are 3 dies (new). Model: HBF36 Serial number: 1-08 Supply voltage: 400 V Number of phases: 3 Frequency: 50 Hz Rated current: 125 A Maximum load current: 38.6 A Breaking capacity: 40 kA Electrical diagram number: PECO168 Itjdpfx Ahszvlp Tj Ejl If you have any questions or require further information, please send a message or contact us by phone.

Condition: excellent (used), Conventional lead and feed screw lathe from manufacturer Nardini S.A. Máquinas e Ferramentas, model ND 220 SE. Well-maintained machine in technically flawless condition. Technical Data: Machine type: Lead and feed screw lathe Manufacturer: Nardini Model: ND 220 SE Control: Conventional Center height: 220 mm Distance between centers: 1,000 / 1,500 mm Swing over bed: 440 mm Swing over cross slide: 270 mm Swing in gap: 630 mm Gap length in front of faceplate: 200 mm Spindle Spindle nose with short taper size 6, DIN 55027 Spindle bore: 52 mm Internal taper: 1:20 Reducer bush: MT 4 18 spindle speeds: 25 – 2,000 rpm Feed and thread range 132 longitudinal feeds: 0.057 – 2.645 mm/rev 132 cross feeds: 0.028 – 1.322 mm/rev 54 metric threads 54 Whitworth threads 54 module threads 54 diametral pitch threads Leadscrew pitch: 6 mm Carriage & Compound Cross slide travel: 250 mm Top slide travel: 125 mm Max turning tool section: 20 × 20 mm Top slide swivel range: ± 45° Tailstock Quill diameter: 60 mm Internal taper: MT 4 Quill stroke: 200 mm Lateral offset: 15 mm Drive Main motor: 3-phase 380 V / 50 Hz, pole-reversible, 3 / 6 kW Coolant pump: 0.09 kW Operational Advantages - Robust machine bed - Very large feed and thread range - Suitable for both single-part and series production - Easy operation - Durable industrial quality Itedpsypcpxofx Ah Ejl Used machine Technically tested Fully functional Ready for immediate use Delivery time: Immediate Ex-works, loaded free of charge Loading: Forklift available Transport / shipping: can be arranged

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00687, load capacity: 125 kg, arm reach: 3,005 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/125L manufactured in 2012.03. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard! Ijdpfx Aez Ahbfoh Eetl   Brand: FANUC Model: R-2000iB/125L Model Number: A05B-1329-B261 Year of Manufacture Robot: 2012.03 Warranty term (months): 12   Payload (kg): 125 Reach (mm): 3005 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1190   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.03 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10    

Condition: ready for operation (used), Year of construction: 1996, pressure 125 t chamfer lenght 3050 mm distance between columns 2550 mm ajustment speed 90.0 mm/sec working feed 10.0 mm/sec return speed 75.0 mm/sec stroke 140 mm dayligth 375 mm column arm 250 mm table width 90.0 mm work height max. ca. 950 mm Number of working hours 14.100 h total power requirement 13.5 kW weight 8500 kg range L-W-H 3630 x 2300 x 2505 mm From a maintenance workshop Good / well-maintained condition With only approx. 14.100 operating hours (!!) - in checked conditions - machinevideo - ?v=wtEBQ0UawQ8 Equipment: - CNC electro-hydraulic press brake - DELEM CNC control - model "DA 58" * Swiveling control panel, front left * 2D graphic programming & product display * Tool & program library - CNC-controlled axes: * Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning - CNC electro-motorized backgauge (X axes) * Stop system with 2x CNC-controlled gantries - CNC electro-motorized height adjustment of the backgauge (R axes) - CNC electro-motorized adjustment of the stop fingers (Z axes) - Manual upper tool clamping - Manual lower tool clamping Iodpfxexabk Is Ah Eetl - Various split upper and lower tools - 2x stable, movable Front support arms - 1x freely movable 2-hand/foot control - Side guard (swinging doors) - Rear guard (swinging door) - Original operating instructions + control unit - Manufacturer's CE declaration

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 34, spindle bore: 86 mm, overall weight: 16,000 kg, Turning and milling center acquired through business takeover Manufacturer: Mori Seiki / Model: MT 250S / 1500 / Year of manufacture: 2000 / Refurbishment for 200,000 euros Condition: good, Control: CNC Mori Seiki MSC 501 Technical data: See attached PDF Max. turning diameter: 570 mm Iodpfxjzxg Sue Ah Estl Turning length: 1530 mm Max. swivel diameter: 800 mm Swivel diameter over cross slide: 420 - 860 mm Spindle distance: 1,828 mm Main spindle: Speed range: 35 - 3500 min.-1 Main spindle power: 18.5 kW / 15 kW Number of curve speeds: 2 Spindle nose: JIS A2-8 Max. bar capacity: 73 mm Spindle bore: 86 mm Spindle bearing diameter: 130 mm C-axis: 0.001° Counter spindle: Counter spindle speeds: 50 - 3500 min.-1 Counter spindle power: 11 / 7.5 kW Number of curve speeds: 2 Spindle nose: JIS A2-6 Max. bar capacity: 60 mm Spindle bore: 73 mm Spindle bearing diameter: 110 mm C-axis: 0.001° Milling spindle: Spindle speeds: 8000 min.-1 Power: 7.5 kW / 5.5 kW Tool taper: KM 63 Spindle bearing diameter: 80 mm B-axis: 120° / 105° Resolution: B 0.001° Number of tools: 42 Tool taper: KM 63 Max. tool diameter: 80 / 125 mm Max. tool length: 400 mm Max. tool weight: 8 kg Tool change time: 1.6 sec. X-axis: 635 mm / Y-axis: + / - 110 mm / Z-axis: 1595 mm / B-axis: 120° / 105° + Chuck: Rapid traverse (X/Y/Z): 24 / 24 / 30 m/min. Max. feed rate: 30,000 mm/min. / Total power: 72.3 kW / Weight: 22 tons / Dimensions: 7.0 x 3.5 x 3.5 m, steady rest

Condition: used, Year of construction: 2018, operating hours: 5,596 h, Equipment: ABS, all wheel drive, JCB TM320 T4F – CONSTRUCTION MACHINERY IN PERFECT WORKING ORDER!!!!! - HEIGHT 2.70M, CAN BE TRANSPORTED ON A FLATBED TRAILER!!!!! - GERMAN VEHICLE - SOLID RUBBER TIRES - SELF-PROPELLED WORK MACHINE, SEE INSPECTION REPORT - CABIN: PORS/FOPS - LIFT ARM WITH WHEEL LOADER ATTACHMENT AND TWO HYDRAULIC AUXILIARY CIRCUITS - HYDR. REVERSE FAN FOR AIR CONDITIONING SYSTEM Isdpozt Ub Hofx Ah Eetl - DRIVER'S SEAT WITH AIR SUSPENSION - BUCKET TYPE: BUCKET 240 HDXL, VOLUME 1 CUBIC METER OPERATIONAL DATA JCB TM 320 T4F (HOMEPAGE) ? Model: JCB TM 320 T4F ? Machine Type: Telescopic Wheel Loader ? Application Areas: Agriculture, Construction, Recycling, Industry, and Handling Operations Engine & Performance ? Engine: 4.4-liter JCB EcoMAX T4F engine ? Emission Standard: Tier 4 Final / Stage IV ? Engine Power: 93 kW / 125 hp ? Maximum Torque: 550 Nm at low engine speeds ? Exhaust Aftertreatment: SCR technology with AdBlue, without diesel particulate filter Drive & Transmission ? Transmission: 4-speed powershift transmission ? Torque Converter Lock-up: TorqueLock ? Maximum Speed: up to 40 km/h ? Drive: permanent all-wheel drive ? Differential: locking differential Lifting Capacity & Hydraulics ? Rated Load Capacity: 3,200 kg ? Maximum Lifting Height: approx. 5.20 m ? Maximum Forward Reach: approx. 2.95 m ? Hydraulic System: Load-Sensing Hydraulics ? Hydraulic Output: 140 l/min ? Breakout Force: 62.6 kN Dimensions & Weight ? Operating Weight: approx. 8,142 kg, depending on equipment and tires ? Overall Length: approx. 6.32 m including standard bucket in transport position ? Overall Width: approx. 2.35 m ? Height over Cabin: approx. 2.72 m ? Wheelbase: 2.55 m ? Turning Radius: approx. 4.35 m ? Articulation Angle: ±43° * Fuel Tank Capacity: 160 liters Brief Description ? The JCB TM 320 T4F combines the maneuverability of a wheel loader with the reach of a telescopic loader. ? Due to its high lifting capacity, powerful engine, and good maneuverability, the machine is ideal for professional applications. ? The permanent all-wheel drive and powerful hydraulics ensure reliable performance even under heavy-duty conditions.

Condition: like new (used), Year of construction: 1999, overall weight: 6,000 kg, volume flow: 300 m³/h, input frequency: 50 Hz, rotational speed (max.): 2,950 rpm, 11: Industrial pumps of the KSB brand 1 unused, 3 used KSB centrifugal pump + motor unit LUV h 150-340/2 Product information: Manufacturer: KSB (Klein, Schanzlin & Becker AG) Model: LUv 5/2 F9 30-605 Year of manufacture: 1968 Origin: Plant Frankenthal (Pfalz), Germany Condition: Used, but in good condition ⚙️ Technical data – Pump: Type: LUv 125/252/2 Flow rate (Q): 300 m³/h Delivery head (H): 210 m (mFLS) Speed: 2950 rpm Serial number (A-No): 2-151-134 874/2 ⚡ Technical data – Motor: Voltage: 6000 V Current: 37.8 A Power: 300 kW Frequency: 50 Hz Speed: 2950 rpm Cos φ: 0.87 Motor number: 2-151-134 874/1 📦 Description: This industrial high-performance pump from KSB is ideal for transporting large amounts of liquid. The pump is sold together with the matching motor unit. Manufactured to the solid German engineering standards of its time, known for durability and high performance. 2. Pump info: KSB centrifugal pump + motor unit Brand: KSB (Klein, Schanzlin & Becker AG) Model: LUv 5/2 F9 30-605 Year of manufacture of the pump: 1968 Origin: Plant Frankenthal (Pfalz), Germany 🔧 Technical data – Pump: Type: LUv 125/252/2 Flow rate (Q): 300 m³/h Delivery head (H): 210 m (mFLS) Speed: 2950 rpm Serial number (A-No): 2-151-134 874/2 ⚙️ Technical data – Motor: Type: LUv 5/2 F9 30-605 Motor No: 2-151-134 874/2 Voltage: 6000 V Current: 37.8 A Itjdpfx Ajwq Shbjh Eol Power: 300 kW Frequency: 50 Hz Speed: 2950 rpm Cos φ: 0.87 📌 Condition: Used, but in good condition. Stored after disassembly from an industrial plant. Technical data has been verified based on the nameplate.