Used Adhesive for sale (619)

Condition: ready for operation (used), Year of construction: 2006, This IMA Combima Systems/I/R75/1370 edgebander was manufactured in 2006. It handles workpieces ranging from 250 to 2800 mm in length and 115 to 1300 mm in width, with thicknesses up to 40 mm. Designed for materials like chipboard and MDF, it features a hot melt adhesive applicator and a servo edge feed system. Ideal for high-quality edge banding, consider the opportunity to buy this IMA Combima Systems/I/R75/1370 edgebander. Contact us for more information about this machine. Lhodpfxsxuw Das Af Rsp Application Types Edge Banding

Condition: used, Year of construction: 2017, machine/vehicle number: 55654146, Outreach: approx. 60 m, max. lifting capacity: 12,000 kg, radio remote control, central lubrication system, 10x ballast plates of 2,250 kg each, (W x H x D): approx. 131x255x28 cm, next technical inspection: 07.2025, next expert inspection: 07.2022, jib configuration according to data sheet (adhesive label #001) Ljdpfx Afsxuvdre Rshp

Year of construction: 2024, condition: ready for operation (used), A nearly unused complete factory for the production of battery housing frames is available. It features the following processes: handling, welding, riveting, Rivtac, screwing, gluing, sealing, measuring and testing. 1) Handling & logistic: component handling, feeding, transfer, positioning, discharge. 2) Riveting & Rivtac: stand riveting, Rivtac joining, fastener inspection. 3) Screw processes: pick & place double screwdriver, simultaneous triple screwdriver, final assembly screwing. 4) Arc welding: large block welding process, welding stations, fourfold clamping concept, rotation devices and trunnion fixations, automatic discharge for NOK. 5) Adhesive & sealer application: brushing & dry cleaning, adhesive application, sealer application, camera inspection and discharge for NOK. 6) Adhesive cleaning & surface preparation: dry tape cleaning and manual tape change. 7) Stud welding, positions: 7. 8) Measuring and testing procedures: geometry measurement before milling with NOK scrap, final measurement, seam inspection, leak test, final inspection, cap installation, leak station, laser marking with NOK scrap procedure. 9) Rework area: robot-supported leak test with sniffing method and 2x manual rework stations. The factory was hardly used and only approximately 1000 components were produced with it. Documentation available. An on-site inspection is possible. Lhodpfx Aexwn Izjf Rsp

Condition: good (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, total width: 2,400 mm, The Lamina Gluer is a manually fed, in-line folding, gluing, and taping machine. Thanks to its smart design, it can handle different sizes and materials. Tool-free setup enables quick changeovers, even for short production runs. Optional machine features include cold glue, rear support unit, working station, tape applicator, and more. The Lamina Gluer is a straight-in-line gluing machine built on a robust frame made of extruded, anodized aluminum profiles. The machine offers manual feeding as standard, with an optional automatic feeder for die-cut, creased, and slotted materials. The operator positions the blanks, and the hot melt unit applies adhesive as the material passes through the machine. Glue line length and exact position can be pre-set using a programmable logic controller (PLC) and a touchscreen interface. A system of pressure rollers ensures perfect adhesion and guides glued blanks onto a pull-out tray, which is easily adjustable for various sizes. The machine comes equipped with adjustable and interchangeable side guides, enabling efficient gluing of 2-piece boxes. The Lamina Gluer is supplied ready for connection to electric and pneumatic systems. Lsdoxwcwwopfx Af Rshp The Lamina Working Station is an additional option for the Lamina Gluer. Products are fed through the Gluer, which applies pre-programmed glue lines, and continue into the Working Station, where they are positioned on vacuum belts. A second piece is mounted and positioned using side lays and pneumatic stops for high-quality finishing. The unit can be adjusted for a wide range of products, from single- to multi-part displays and boxes, large back supports, shelves, and more. Transport The material is conveyed by four vacuum belts that bring the sheets to a stop bar for subsequent operations. The vacuum is generated by a fan that secures the sheets for optimal handling and precise registration. During production, the operator has full access above the sheets for additional mounting, thanks to the vacuum belt design. Pressure Rollers Material passes through two pressure rollers at the machine’s end for optimal adhesion. Registration Registration accuracy is +/- 1 mm and is achieved by a combination of photocell sensors and pusher guides. The operator uses a side lay guide to simplify the mounting process at the station.

Condition: excellent (used), Hydraulic, Plural-Component, Fixed-Ratio Proportioner. For pouring and dispensing sealants and adhesives and polyurethane foam. Model number: HFRB-16 AKAKDBH Part No: UC0465 Series: H15B Serial No: N102 Max motor WPR: 83 bar Max outlet fluid WPR: 206 bar Max air WPR: 7 bar Max operating temp: 77 deg C Max ambient temp: 50 deg C Weight: 395 kg 2 pieces Ledpfx Afeixzuzs Rjhp

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, Coating, laminating – additional unwinder for lamination Corona treatment – during coating of film with water-based dispersions Working width – 1700 mm Coating speed – 0–100 m/min Material in rolls Raw material – paper (50–300 g/m²), film (0.023–0.10 mm) Substances – solvent-based adhesive, water-based adhesive Type of coating – coating head: Mayer rod, anilox roller, slot die roller Dryer – length 18 m, 7 drying sections, temperature 30°C–170°C, gas drying (blower) Lsdpfjxwaikex Af Rjhp Roll diameter – max 1400 mm Machine includes hot air generator Detailed description available on request.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, OTT Tornado Top Edge Banding Machine in Excellent Condition PU glue pot with release agent, also suitable for EVA adhesives. We had the entire machine recalibrated in September 2024. The glue unit was replaced. The results are perfect with transparent adhesive and incredible with white panels using white adhesive. The machine runs perfectly and without any problems. Technical specifications: Edge thickness: 0.4 - 8 mm Panel thickness: 8 - 40 mm Minimum panel length: 150 mm Lhedpev Sm Hcefx Af Rep Minimum panel width: 70 mm Feed speed: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm Cross-cutting unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner rounding unit Scraper blade Buffing unit Triple spraying Total power: 17.5 kW Dimensions: Length: 6180 mm Width: 1770 mm mm Weight: 3100 kg - Available immediately -

Condition: used, Year of construction: 2019, machine/vehicle number: 55655818, Outreach: approx. 70 m, max. lifting capacity: 12,000 kg, radio remote control, air conditioning, central lubrication system, 10x ballast plates of 2,250 kg each, (W x H x D): approx. 131 x 255 x 28 cm, next main inspection: 07/2027, next expert inspection: 01/2022, boom configuration according to data sheet (adhesive label #003) Lsdpsxuvd Eofx Af Rshp

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Hello, I am selling a complete set of machines for the production of HEPA filters. The set includes: - Pleating machine (pleats the filter media), with a pleat width of 550 mm and pleat height up to approx. 35 mm - Hot melt adhesive oven - Set of embossing rollers for pleat heights of 10 mm and 15 mm - Glue application unit - Set of injection molds for vacuum cleaner filters - Band knife for cutting pleats The set can produce pleats for automotive filters, air purifiers and other applications requiring this type of filter. The price quoted is net. Lhodpfx Asxv Siajf Rop

Year of construction: 2024, condition: new, 350 is a high speed slitting machine with excellent design structure. The max. slitting speed can reach to 300m/min with stable running. It adopts full servo motor system and PLC to control the machine tension, which guarantee machine run stable when high speed slitting. This automatic slitting machine is mainly suitable for slitting label rolls and adhesive labels, and it also could slit general paper and film rolls. Features: 1. full servo motor driving system for tension control. 2. Italy ST web guide system guarantees the high precision of web when high speed running. 3. Moveable eccentric knife roller design makes operator adjust knife conveniently. 4. Special rewinding structure, upper shaft adopts turret rewinder structure. 5. PLC and touch screen control. 6. Unwinding shaft could lift up and down, which can load heavy web roll. Specifications: Max. web width - 350 mm Max. unwinding diameter - 800 mm Min. slitting width - 20 mm Slitting speed - ≤300 m/min Precision of slitting - ±0.10 mm Max. rewinding diameter - 500 mm Lsdpfx Aeg I H Nasf Rohp Power supply - 380V/3ph Main motor power - 1,8 kw Weight - 1780 kg Overall dimension - 1200 x 2400 x 1650 mm

Condition: used, Number of sanding units 4 St. Ledpfjvu Hgbex Af Rshp sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: used, OTT Tornado FÜ + PU SPS-compatible control, 7" TFT touch color display CM-CombiMelt for EVA and PUR hot melt adhesives Pre-milling unit – jointing Fully automatic roller magazine Fully automatic edge magazine Pneumatic flush trimming 0–3° Lsdpfx Afjxt N E He Rehp Flush milling – 12 mm Radius milling R-2, R-5 Bevel milling 0°/15°/30°/45° Corner rounding Radius scraper Flat scraper Soundproof cabin with room extraction Cleaning set with spray unit, fine buffing device, and glide agent spraying unit – PU First delivery 2008 Machine is FACTORY REFURBISHED in TOP CONDITION Available from stock Lieboch

Condition: used, functionality: fully functional, The EFABIND automatic filler and closer is designed for efficient filling and closing of plastic pails with capacities of 3 and 5 kilograms, widely used in the food, chemical and industrial products industry. This equipment combines precision filling with an automatic closing system that ensures an airtight seal, optimizing productivity and packaging quality. Applications: Food industry: Packaging of sauces, creams, ice creams, butters, jams and other bulk products. Chemical industry: Paints, adhesives, resins, cleaning products. Other industries: Fertilizers, granular and pasty products. It consists of: * Container denester. * Dosing machine with 2 heads with coarse and fine weighing. * Thermosealer Mod. L-525. Lhjdewny Ecopfx Af Rsp * Cap positioner starting from a column. * Closure of caps in two stations. * Production may vary depending on the format and product to be closed.

Condition: like new (used), functionality: fully functional, machine/vehicle number: EFR4AOOS, - Brand: Graco Ljdpfx Ajxv Dcref Rohp - Reference: EFR4AOOS - UPC Code: 755652866732 - General Industry - Dosing, mixing, measuring, and electronic control system designed for the precise application of single or two-component materials, SEALANTS AND ADHESIVES - Applications: Beads, encapsulation - Maximum flow rate: 3.4 l/min - Maximum working pressure: 241 bar - 80+80 cc stainless steel bases - Pressure ratio: 1:1 - Maximum fluid temperature: 50°C - Fully serviced second-hand product - 1-year warranty - Shipping or in-store pickup available - 21% VAT NOT included - VAT INCLUDED. VAT refund can be requested if the company is registered in VIES or has a TAX ID - Customs duties and import charges at buyer’s expense (Incoterm: DAP)

Year of construction: 2025, condition: new, Marble and Stone Blasting Machine is a specialized surface treatment system designed for cleaning, texturing, and finishing marble, granite, concrete, and natural stone surfaces. Using high-efficiency blast turbines, the machine projects abrasive media onto the surface to remove impurities, open the stone pores, and create a decorative or anti-slip texture. This machine is widely used in the construction, architecture, monument, and decorative stone industries to improve the visual appearance and surface properties of stone materials. It provides a uniform, matte finish that enhances coating adhesion and slip resistance — ideal for flooring, facades, and outdoor applications. Lhedoxv Atijpfx Af Rep Built with durable wear-resistant materials, the machine ensures long service life and consistent performance. The Marble and Stone Blasting Machine combines high productivity, energy efficiency, and environmentally friendly dust collection, making it a reliable solution for continuous stone surface processing and finishing.

Year of construction: 2024, condition: new, Slitting machine with rotary die-cutting function is suitable for blank adhesive labels. It has the function of automatic meter counting, label quantity counting, and pre-set auto stopping. It has characteristics of compact structure, fast speed, high efficient, easy operation and steady running. Features: 1. Die-cutting and slitting can be finished in one process. 2. Main motor with Schneider (France) frequency converter to control step-less speed. 3. The machine adopts Japanese and Taiwan pneumatic technique. 4. EPC with two photoelectric sensors for web guiding, guarantee driving in high precision. 5. The machine has magnetic powder clutches for unwinding and rewinding tension control. Specifications: Max. web width - 450 mm Max. unwinding diameter - 600 mm Unwinding tension control - Magnetic powder brake 100NM*1 Web guiding system - Photoelectric eye sensor EPC*2 Die-cutting speed - ≤100 m/min Die-cutting repeat length - 100T-150T Slitting technique - Circular knife (10 pieces) Slitting speed - ≤120 m/min Min. slitting width - 18 mm Trim disposal - Trim reject fan (0.75kw) Lhsdog Rcduopfx Af Rop Max. rewinding diameter - 480 mm Rewinding tension control - Magnetic powder clutch 50NM*2 Rewinding inner core diameter - 76 mm (3”) Power supply - 380V/3ph Main motor power - 2.2 kw Total power - 3 kw Weight - 1400 kg Overall dimension - 2000x1350x1750 mm

Condition: used, Year of construction: 2010, format range from 15 1/2" to 30" with 1/ " print widths of up to 427 mm reel diameter in the unwinder up to 127 mm E + L paper path control device Tensiomatic paper path tension measuring device central AIC remote control Lsdpoxvz H Ujfx Af Rshp automatic register special surface treatment of inking rollers for UV inks temperature control in ducts and oscillating rollers UV drying with air cooling and 10 UV lamps UV vapor extraction device maximum speed 300 m / min. die cut of registration system cold pressing of metallic foil laminating aggregate flexo printing unit format from 22" to 30" with 1/6" Corona cutting unit for self-adhesive labels printing form bender Grafotronic 440 maximum reel diameter 800 mm viewing table Master with cutting and editing capabilities shaft with five pairs of cutting discs three knife cutting blade module

Condition: used, Year of construction: 2007, Technical details: grinding length: 3150 mm grinding width: 800 mm workpiece height: 650 mm table surface area: 3.150 x 600 mm magnetic clamping plate: 3.000 x 600 mm table load: max. 6 t dimensions of grinding wheel: 450 x 100 x 127 mm : 22 kW total power requirement: 70,6 kW weight of the machine ca.: 15 t dimensions of the machine ca.: 11 x 3 x 2,4 m Ledpfsuh H Iyex Af Rjhp surface grinding machine, CNC Flachschleifmaschine, coolant device 2.500l, magnetical adhesive force control, semi automatic balancing system, *

Condition: new, maximum load weight: 73,090 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. The following is an excerpt from the equipment list; the full specification is available upon request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable * Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4 2-Axle Compact Front Bogie: * Hook mounts front and rear. Length: approx. 2,200 mm * Chassis width: approx. 2,850 mm Lhedpfxjxbv Auo Af Rop Lowbed: * ATX-A lowbed with telescopic longitudinal beams in low-profile design, with fixed hardwood flooring, approx. 50 mm thick * With drive-over bridge hooks at the front and bolt-on/lug coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 7,150 mm * Beam height: approx. 300 mm * Beam width: approx. 650 mm * Loading height approx. 450 mm, ground clearance approx. 150 mm 4-Axle Rear Bogie: * Mechanical pin/lug coupling for attaching a lowbed at the front * Rear closing cross-member * Chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm 2-Axle Front Bogie: * Pendulum axles, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and locking pins for securing in raised position * Axles finished with 2 coats of 2-component paint in MB7350 Novagrau * Technical axle load: approx. 14,640 kg (62 km/h) * Hydraulic axle compensation 4-Axle Rear Bogie: * Pendulum axles, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and locking pins for securing in raised position * Axles finished with 2 coats of 2-component paint in MB7350 Novagrau * Technical axle load: 14,640 kg (62 km/h) * Hydraulic axle compensation Tyres: * Tyres according to manufacturer’s choice (M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Entire steel structure is automatically blast-cleaned after welding using a turbine blasting system * Second round of blasting with corundum for optimal coating adhesion * HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) * Final coat with 2 layers of 2-component topcoat, single colour in RAL 3002 Carmine Red, corresponding to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Plug-in aluminium side and rear walls for the gooseneck, approx. 400 mm high * 3.5-inch king pin * Truck hydraulic connection with flow regulator (20 l/min), incl. gallows for supply line suspension * The tank of the tractor unit must have a minimum capacity of 80 l * With MAX Trailer couplings; otherwise, couplings to be supplied by the customer ex works * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Multi-coupling hydraulic connectors on the gooseneck * Front bogie with separate air connection for pneumatic tools * BEKA-MAX central lubrication for a 2-axle bogie with standard grease NLGI-2 * Prepared for receiving bolt-on container positioning for 1 x 20' or 1 x 30' containers on outer beams * Without container locks * Mounts on the outer beams of the loading area for installing folding marker extensions * BEKA-MAX central lubrication for a 4-axle bogie with standard grease NLGI-2 * Rear bogie equipped with a socket for remote cable steering * Rear bogie with trough * One LED beacon with mounts on the left and ri

Year of construction: 2012, condition: good (used), functionality: fully functional, corner joining machine with adhesive injection this machine combines three functions Lsdpfx Aotq Ewbof Rshp frame pressing, adhesive punching and custom adhesive injection. the mechanical controls for the milling tool and the pump can be adjusted to the same level to facilitate the operation of the machine. machine includes punches for various series machine year 2012

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Fe-Ma-Tech Bag Melter Glue Application Unit: - Type: advanced PUR 2 kg light eSmart - Year of manufacture: 2022 - TOP condition - Weight: approx. 70 kg - Dimensions: 550 x 430 x 970 mm - Type of glue pump: Gear pump - Pump nominal speed: 93 rpm - Base tank size (reservoir): approx. 1 liter - Melting capacity: up to 2 kg/h - Temperature sensor: PT100 device and external heating / optional Ni. 120 - Control accuracy: +/- 1°C The PUR 2 kg light eSmart bag melter is suitable for edge banding machines with lower adhesive consumption. Tank size is compatible with all standard PUR bag packages in sizes of 2-3 kg. Modular system: All components can be replaced individually. Simply remove the sheet metal cover to quickly access all relevant parts. Melting capacity up to 2 kg/h (depending on the adhesive and its viscosity). The solid PUR adhesive, wrapped in aluminum foil, is placed into the tank. The adhesive is gently melted as needed. A glue reservoir is located beneath the tank, holding up to 0.7 kg of liquid adhesive. Lhedpfsw I S Eaox Af Rep From there, the adhesive is conveyed via a gear pump, through a FE-MA-TECH® hot-melt hose and heated application head (valve) into the application units (IMA, Homag, etc.). The system is completely airtight, allowing the adhesive to remain in the unit for several months when used properly. Shipping via freight forwarding is available for an additional €190.40 #8404

Year of construction: 2024, condition: new, Slitting machine with rotary die-cutting function is suitable for blank adhesive labels. It has the function of automatic meter counting, label quantity counting, and pre-set auto stopping. It has characteristics of compact structure, fast speed, high efficient, easy operation and steady running. Features: 1. Die-cutting and slitting can be finished in one process. 2. Main motor with Schneider (France) frequency converter to control step-less speed. 3. The machine adopts Japanese and Taiwan pneumatic technique. 4. EPC with two photoelectric sensors for web guiding, guarantee driving in high precision. 5. The machine has magnetic powder clutches for unwinding and rewinding tension control. Pnhxn Specifications: Max. web width - 570 mm Max. unwinding diameter - 1000 mm Lodpfx Aog Sa Hvsf Rohp Unwinding tension control - Magnetic powder brake 100NM*1 Web guiding system - Photoelectric eye sensor EPC*2 Die-cutting speed - ≤100 m/min Die-cutting repeat length - 100T-150T Slitting technique - Circular knife (10 pieces) Slitting speed - ≤120 m/min Min. slitting width - 18 mm Trim disposal - Trim reject fan (0,75kw) Max. rewinding diameter - 480 mm Rewinding tension control - Magnetic powder clutch 50NM*2 Rewinding inner core diameter - 76 mm (3”) Power supply - 380V/3ph Main motor power - 3 kw Total power - 4 kw Weight - 1500 kg Overall dimension - 2000x1480x1750 mm

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: Lhodpewka Nyofx Af Rjp - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Year of construction: 2012, condition: ready for operation (used), A Cevenini roll slitting machine for adhesive tapes and foam adhesive tapes is available. Carrier width range: 0.4mm-280mm, knife diameter: 300mm, knife profile: B, max. mother roll width: 1600mm. Including various accessories such as grinding stones, pressing device, clamping jaws, etc. Documentation available. An on-site inspection is possible. Lhodoxvrupspfx Af Rop

Year of construction: 2024, condition: new, Slitting machine with rotary die-cutting function is suitable for blank adhesive labels. It has the function of automatic meter counting, label quantity counting, and pre-set auto stopping. It has characteristics of compact structure, fast speed, high efficient, easy operation and steady running. Features: 1. Die-cutting and slitting can be finished in one process. 2. Main motor with Schneider (France) frequency converter to control step-less speed. 3. The machine adopts Japanese and Taiwan pneumatic technique. 4. EPC with two photoelectric sensors for web guiding, guarantee driving in high precision. 5. The machine has magnetic powder clutches for unwinding and rewinding tension control. Specifications: Lhodpfx Aog Rb R Ejf Rep Max. web width - 320 mm Max. unwinding diameter - 600 mm Unwinding tension control - Magnetic powder brake 100NM*1 Web guiding system - Photoelectric eye sensor EPC*2 Die-cutting speed - ≤100 m/min Die-cutting repeat length - 80T-150T (if cutting rule is short, 60T is ok) Slitting technique - Circular knife (8 pieces) Slitting speed - ≤120 m/min Min. slitting width - 18 mm Trim disposal - Trim reject fan (0.75kw) Max. rewinding diameter - 480 mm Rewinding tension control - Magnetic powder clutch 25 NM*2 Rewinding inner core diameter - 76 mm (3”) Power supply - 380V/3ph Main motor power - 2.2 kw Total power - 2.5 kw Weight - 1100 kg Overall dimension - 1600x900x1500 mm