Used Adhesive for sale (599)

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 03DR2150, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, overall weight: 3,500 kg, Equipment: cooling unit, Wire-Cut EDM Machine The machine comes from productive operation and is in fully functional, used condition. All relevant assemblies are complete; the generator cabinet, control system, wire feed, and AT system (Automatic Threader) are all present and complete. Running times according to control system: Processing time: approx. 29,062 h NC on-time: approx. 43,836 h Ready-/TFT downtime: approx. 8,966 h Maintenance records (excerpt): Filter change: last performed at 176 h / 200 h Resin change: 21 h / 1000 h Oil refill: 742 h / 1000 h Conductivity sensor: 742 h / 1000 h Current supply rotation: 57 h / 80 h The machine is complete but shows typical signs of use after more than 10 years in operation Accessories are extensive and well organized Servicing always confirmed as per control system Automatic threading system included Accessories / Equipment: Original Mitsubishi nozzle & roller/bearing kit: various guide rollers upper and lower diamond guides nozzle set (upper/lower nozzle) drying stones / assembly tools NSK/Japan replacement bearings spare tension rollers Manufacturer’s wooden box Mitsubishi Electric Spare and consumables: resin container (packed) filter elements quick adhesive components A/B pH test strips process chemicals (for EDM) logbook / maintenance records Fpedpfjx Hadvex Afneb Documentation / manuals: complete folders: Operator’s Manual MV Part 1 & 2 training materials “Advance Series” operating instructions (German) maintenance and AT maintenance sheets Travels (X / Y / Z): 600 × 400 × 310 mm Working table / workspace: table size: 840 × 640 mm (square table) max. workpiece dimensions: 1050 × 800 × 295 mm max. workpiece weight: 1,500 kg Wire data: wire diameter: 0.1–0.3 mm max. wire feed: 23 m/min tension: 0.5–25 N automatic threading (AT), including fine-threading Taper cutting: opto-linear T/C device, ±75 mm (X/Y), max. taper angle 15° at 260 mm workpiece height Generator / Control system: transistor-controlled pulse generator 15" LCD touch control 6-axis simultaneous control integrated 2D and 3D CAM (Parasolid viewer) NC memory up to 1 GB USB interfaces (2×) Dielectric system tank capacity: 860 l filter flow rate: 50 l/min paper filters (2 pcs) resin container 10 l (ion exchanger)

Condition: good (used), Year of construction: 2007, Gallus EM 510 • Year of manufacture: 2007 • Maximum printing width: 510 mm • Printing units: 3 dual-driven print stations • Application: Self-adhesive label production _____ Printing Equipment • 3 flexographic printing units with dual-drive technology • Plate cylinders (1/8"): 3 × 88, 3 × 92, 3 × 96, 3 × 100, 3 × 108, 3 × 116, 3 × 120, 3 × 140 • Magnetic cylinders (1/8"): 2 × 96, 3 × 100, 3 × 108, 3 × 116, 3 × 120, 4 × 140, 3 × 176, 3 × 184, 2 × 192, 1 × 222 • 13 anilox rollers (various volumes: 4.1; 5.04; 6; 6; 6.3; 6.09; 8; 8.25; 9.58; 13; 13.51; 16.57; 30) • 2 brand new anilox rollers • 3 sleeve systems z=88 for varnishing (including mounting station) • Screen printing unit _____ Die-Cutting & Converting • 3 die-cutting stations • 2 stations equipped with adjustable counter-pressure cylinders (Spilker Variabase) • Laminating station • Waste matrix removal on rail system: o 2 matrix rewinders (upper/lower) • Double-spindle rewinder (roll-to-roll) • Insetter system for pre-printed webs • Register control for 5 stations (3 printing + 2 die-cutting, Sensotec) _____ Drying & Treatment • 3 × Uviterno UV curing systems (240 W/cm) • 2 × Lambda Technology NIR drying modules for water-based inks • Corona treatment 2 kW (SIT) _____ Web Guiding & Control Fpedjx Hacrspfx Afnjb • E+L web guiding system with: o 2 ultrasonic sensors o 1 line sensor • E+L ELSCAN video inspection system • Web cleaning system • Complete set of anti-adhesive rollers _____

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, working height: 900 mm, space requirement height: 1,400 mm, space requirement length: 4,050 mm, space requirement width: 1,300 mm, operating pressure: 7 bar, with PLC control system (including touchscreen) and hot-melt adhesive application to the workpiece for edge materials up to 3 mm: joining cutter (including DIA tool), up to 2 mm cutting depth (max. 1 mm for special materials such as multiplex), maintenance-free glue pot with quick-change pot preparation including glue discharge device, HF trim saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combined version), corner round milling unit, surface scraper (including pneumatic lift), robust chain feed, ball-bearing double roller upper pressure, viewing window from machine rear side, extendable workpiece support, feed rate approx. 10 m/min. Complete with quick-change set-up for corner milling unit, radius scraper (including pneumatic lift), chassis F 4 – Technical Specifications Fedpjx E N Nfsfx Afnspb Max. edge thickness: 3 mm Min. / Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: 7 m / min Ready for operation: approx. 3.5 min Max. power consumption: ∅ approx. 7.4 kW Electrical connection: 400 V / 3 Ph / 50 Hz Worktable height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Extraction port: ∅ 1 x 140 mm

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, chain feed, double roller top pressure, extendable work piece support and signal lamp for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0 mm and of 8 – 50 mm work piece thickness. Fpodpfed R U Acox Afnob Speed: 7,0 m/min. • 2 spaces for finishing units • 7,0“ Colour Touch screen →Automatic edge feeding for material over turntable D=600 mm →Infeed lineal (400mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Rotatable control panel with 7,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights →Optional : Riepe non-stick spray station and Riepe cleaning spray station Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 67641340eaae3

Condition: excellent (used), Year of construction: 2023, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, Holz-Her Edge Banding Machine LUMINA 1380 Multi PUR & EVA adhesive (up to 60 mm) + NIR unit / laser edges up to 45 mm, as interchangeable station Fjdpfxex E A Dio Afnspb Jointing milling IntelliSet - tool correction fa.s.t. - setup in the gap iTronic - pressure and glue quantity control Fully motorized equipment for all units Multi-function milling - radius 1.3 mm (2x) & 2 mm (2x) Spraying devices and more... The machine is currently being refurbished at the factory in Voitsberg, Austria.

Condition: ready for operation (used), Year of construction: 2006, A Krones labeling system with three labeling units is available. Labeling type: variable, wet glue units: 2, self-adhesive units: 1, max. labeling capacity: 72000 containers/h, gripper bore: 150mm, threaded bore: M8, pitch circle: 195mm. Machine dimensions X/Y/Z: approx. 2550mm/2550mm/2500mm. Documentation available. An on-site inspection is possible. Fsdpfx Afsx E Advenjpb

Condition: used, Year of construction: 2008, IDM Level HD is an industrial single-sided edgebanding center designed for edge processing in standard furniture manufacturing. The HD model features a more robust construction, making it suitable wherever consistent edge quality is required at higher feed speeds. This machine enables complete workpiece processing in a single pass—from pre-milling and adhesive application to the final edge refinement. Owing to its modular arrangement of working units, the machine can process ABS/PVC edges as well as veneer. The machine is pre-owned, fully cleaned, inspected, and ready for installation. Technical specification: • Pre-milling unit: 2 counter-rotating motors to trim the leading edge before edgebanding • Gluing unit: EVA glue pot, electronic temperature control • Pressure zone: main pressure roller + additional pressure rollers • End trimming saws: 2 motors, clean trimming of edge ends • Top and bottom trimming units: profiling, precise trimming of ABS/PVC edge • Front corner rounding unit: radius machining of panel corners • Rear corner rounding unit: finishing of corners at workpiece outfeed • Radius scrapers: final smoothing of edge radius • Flat scrapers: finishing of edge surfaces • Buffing unit: 2 discs for final polishing of the edge Fpsdpfoxztmdex Afnsb • Complete extraction system: connection points for all working units • Pneumatic pressures and adjustments: secure workpiece hold and precise regulation • Manual fine adjustment: analog readout wheels and micrometric adjustments for precision set-up

Condition: good (used), Year of construction: 2016, Gallus EM 260 • Max. Printing Width: 250 mm • Complete machine control system retrofit: 2016 • Printing Units: 8 (dual-drive technology) • Application: Production of self-adhesive labels _____ Printing Equipment • 8 × Flexographic printing units • Print cylinders (1/8") – 8 pcs each: z=88, 92, 96, 100, 108, 116, 120, 124, 132 • Additional impression cylinders for thin and thick substrates • 46 anilox rollers for all applications • 4 × Sleeve systems z=88 for varnishing (including mounting station) • 4 × Fully equipped chamber doctor blade systems with peristaltic pumps • Screen printing unit _____ Die-Cutting & Converting • 3 × Die-cutting stations • 2 × Die-cutting units equipped with adjustable counter-pressure cylinders (Spilker Variabase system) • Magnetic cylinders (minimum 3 pcs each, 1/8"): z=88, 92, 96, 100, 108, 116, 120, 124, 132 • Rewinding & waste removal systems: o 3 × Matrix rewinders on rail system o Additional matrix rewinder o Double-spindle rewinder (roll-to-roll) • Laminating unit on rail system • Insetter register system for pre-printed webs Fpsdpfxsx Haclj Afnsb • BG 74 insert rewinder _____ Drying & Treatment • 8 × UV curing units from Uviterno (240 W/cm) including spare lamps and accessories • Corona treatment unit 1 kW • Integrated cooling and air extraction _____

Condition: used, Holz Her UNO 1303 + PU Fsdsxlz Nzepfx Afnjpb Edge thickness 0.4 -3 mm (6 mm) Control panel with selector switches for setting the units Fully automatic edge magazine for rolls and strips Adhesive application station: cartridges + PU gluing Workpiece height 6-55 mm Pneumatic pressure unit Cutting unit for rolls and strips up to 3 mm (6 mm) edge thickness with adjustment of 0-10° angle of the cutting saws Milling unit, flush milling, radius milling, bevel milling - 15° Scraping unit for bevels and radii Surface scraping unit - finish Machine is CHECKED in TOP CONDITION from a very well-maintained craft business from the Lieboch warehouse

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, Corner rounding unit, chain feed, double roller top pressure, extendable work piece support and signal lamp Fpedpfx Afsd R U Adonjb for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 –3.0 mm and of 8 – 50 mm work piece thickness. Speed: 7,0 m/min. • 2 spaces for finishing units • 10,0“ Colour Touch screen →Automatic edge feeding for material over turntable D=600 mm →Infeed lineal (400mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel →Rotatable control panel with 10,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights →Optional : Riepe non-stick spray station and Riepe cleaning spray station Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC ed 67641340e9686

Condition: used, Year of construction: 2015, functionality: fully functional, total length: 7,920 mm, workpiece height (max.): 60 mm, warranty duration: 3 months, HOLZ-HER Edgebander ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15mm. Simple program changeover and tool adjustment via the 18.5" touch control panel. Short heating time for the GlueJet adhesive system of approx. 2 to 3 minutes, depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet application system and glue cartridges. Changing PUR adhesive and cleaning the system is quick and easy within a few minutes. Fjdpfxsx Emf Ds Afnjpb Axis adjustment via high-precision, repeatable servo motors. Special configuration for materials with protective film, such as high-gloss and supermatt surfaces! One of the true highlights of this machine is the multifunction package, which shows its strengths in companies processing a wide variety of edges. The DIA tools are constructed in multiple stages and can switch between radii and bevels as needed – from the longitudinal milling unit to corner copying and the profile scraper. The pull-out workpiece support and the extended infeed area facilitate processing of large workpieces, and a guide system assists in feeding small parts into the machine. Edging thickness (coil material): 0.4 – 3 mm (depending on material) Edging thickness (strips): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR, with minimal effort required. All common edge types, including high-gloss, supermatt, and solid wood edges up to 15mm. iTronic – pressure and glue quantity control Prepared for connection to a RETURN system Motorized pressure bridge with upper belt drive Multifunction units for rapid changeover between radius, flush, and bevel processing Vertical & horizontal spray systems and much more.

Year of construction: 2022, condition: ready for operation (used), A Mechatronika pick-and-place machine is available. Placement capacity: 1500/h, max. PCB dimensions X/Y: 300mm/400mm, component range: 0402 to 30mm/30mm, min. connection pitch: 0.5mm. Tape feeders: 8mm/12mm/16mm/24mm/32mm/44mm, max. number of 8mm tape feeders: 32, bar feeders: SO4 to PLCC84, component centering: optical (vision). Tool changer: 8, resolution X/Y: 5µm, angle resolution: 0.045°/step. Machine dimensions X/Y/Z without feeder: approx. 750mm/830mm/550mm, machine dimensions X/Y/Z with all attachments: 1700mm/1000mm/550mm, weight without feeder: approx. 70kg, operating hours: approx. 300h. Including base frame, computer unit, monitor, accessories and VS dosing unit for the fully automatic, program-controlled application of solder paste or adhesive from cartridges (5cm³/10cm³). Documentation available. On-site inspection is possible. Fpedpfx Afju Af Absneb

Condition: used, Year of construction: 2016, functionality: fully functional, number of ink cartridges: 7, resolution (max.): 2,400 dpi, paper weight (min.): 60 g/m², paper weight (max.): 350 g/m², counter reading (black): 1,440,174, counter reading (color): 5,702,857, Equipment: auto duplex, brochure finisher, documentation/manual, Machine Type: Digital sheet-fed full-color printing press. Printing Speed: Up to 6,000 full-color prints (4/0) in A4 format per hour (100 prints per minute) Resolution: 2400 x 2400 dpi Fpedpfx Afjx Eddnjneb Colors: Up to 7 colors: (CMYK) + clear toner/silver/gold Screen Rulings: Cluster dot 150, 200, 300, 600, stochastic. 256 gradation levels per color. Paper Dimensions: Maximum sheet size 330 x 488 mm, minimum sheet size 178 x 178 mm Image Format: Maximum image area 326 x 476 mm Paper Weight: 60–350 g/m². All print substrates can be processed at rated speed. Print Substrates: Coated paper (glossy, matte, silk), uncoated paper, textured paper, specialty media, recycled paper, perforated paper, transparent substrates, self-adhesive labels, Xerox DocuCard. Multi-media printing in a single job is possible. Full Width Array: Optical monitoring of each color and optimization of laser beam intensity and transfer for best image quality. Fifth Station: Fifth station printing with clear/gold/silver toner. Images from this station are transferred simultaneously with main colors in IBT at 2400 dpi. Paper Tray Capacity: Two internal trays for 2,000 sheets each (total 4,000); optional two external Oversize High Capacity Feeder (OHCF) trays with 2,000 sheets each. Output: Light production finisher – device for collecting prints, perforating, and stapling. Environmental Control: Integrated environmental management module. EFI EX-P 1000 Print Server (Controller): Color management, graphical job and print management interface, parallel job handling, high-speed rasterization and printing, supports variable data printing.

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 4,000 mm, overall weight: 820 kg, load capacity: 500 kg, The offer concerns the following set: (possibility to adjust device parameters or to purchase the vacuum lifter or jib crane separately) - Vacuum lifter for boards, suitable for handling MDF, laminated boards, raw boards, particle boards, etc. (model WOOD SYSTEM DS 250) - Stationary jib crane - Electric chain hoist - Manual trolley Features of the WOOD SYSTEM DS 250 vacuum lifter: - Designed for handling boards - Actuator for rotation between vertical and horizontal positions - 6 suction cups Ø 200 mm - Frame allows for adjustment of suction cup positioning to match the material being handled - Beam length: 2500 mm - Each suction cup is equipped with a ball valve for individual deactivation - Integrated air pulse function to prevent material adhesion - Individual X and Y axis adjustment for each suction cup - Control from the operating console (control panel): - Power on/off for the generator - Vacuum engagement/release - Thumb-operated control of the electric hoist – raising/lowering the lifter - Pressure gauge - Pneumatic supply – equipped with vacuum generators - Lifting capacity: 400 kg - Device weight: 100 kg - CE certificate Stationary jib crane Technical data: • Column height: 4 m • Height under the jib: 3 m • Jib length: 4 m • Lifting capacity: 400 kg • Slewing range: 270 degrees • Lifting speed: approx. 3 m/min • Colour: any RAL palette colour on request • Manual slewing • Manual trolley • Quadruple/double needle bearing on the jib arm for smooth rotation • Electric chain hoist • CE certificate INCLUDED IN THE PRICE: • Pillar jib crane • Electric hoist – single phase Fpjdjxln Drjpfx Afnsb • Manual trolley • CE certification • Complete documentation Standard warranty: 12 months

Condition: used, OTT Tornado - TOP Control system - via a 15-inch color touch monitor for full automation and maximum operating convenience. CM-CombiMelt gluing system suitable for processing EVA and PUR hot melt adhesives as well as all standard cleaning granulates. Joint processing unit for edging chipboard panels. Automatic roll magazine. Automatic edge magazine. Double end trimming unit with automatic 0° / 3° swivel. Flush milling unit for flush trimming - 12mm. Fine radius milling - profile knives R2 - R5. Automated copying milling - corner rounding. Scraper unit - radius / bevel. Fedpjxy Iw Ujfx Afnspb Surface scraper unit. Sliding agent spray unit - PU. Cleaning set with fine polishing unit. Very stable workpiece support with roller conveyors - FRONT with scissor extension. Complete set of tools included. Machine is AS NEW in EXTREMELY WELL-MAINTAINED CONDITION. First commissioning in 2009, very few operating hours, approx. 1600. Machine from lease return / leasing option available. Ex stock Lieboch.

Condition: used, maximum load weight: 2,900 kg, overall weight: 3,500 kg, axle configuration: 3 axles, first registration: 08/2025, loading space length: 6,100 mm, loading space width: 2,100 mm, loading space height: 50 mm, total width: 2,100 mm, total height: 50 mm, Now chat via WhatsApp: Quickly & easily get in touch with our sales advisor. Internal ID number: [2752] Vehicle Highlights: SUPER STABLE - SUPERIOR DESIGN - FAST LOADING of VEHICLES • Curb weight: ONLY 600 kg (gross 3,500 kg) • Payload: 2,900 kg (+600 kg trailer) • Overall dimensions: 7705 x 2110 x 600 mm • Loading area length: 6055 x 2110 x 600 mm • Platform height from ground: 600 mm • Number of axles: 3 x ALKO (1350 = 4050 kg) • Permissible total weight: 3,500 kg • Loading area length: 6,055 mm • Loading area width: 2,110 mm • Loading ramps: length 2,500 mm • 100 km/h approval for Germany • Wiring: 13-pin + LED lighting • R10 alloy wheels preferred • Stainless steel frame anchor points • 1x spare wheel • 1x jockey wheel • COC Certificate • 6x AL-KO axle shock absorbers 1350 KG • Side compartments for wheel chocks • 2x red wheel chocks • AKS AL-KO safety coupling 3.5 t • 6x R10 alloy wheels Fedpew Ik I Hsfx Afnopb • Self-adhesive black side decals • Winch • Starbooster included ----Interested in leasing or financing? We offer attractive deals – also available with no down payment! Please contact us. Contact: Telephone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm, Sat: 9:00 am – 2:00 pm Note: All information provided online is non-binding and serves only as a general description of the vehicle. Errors, misprints, and prior sale excepted. The contractual condition of the vehicle is determined exclusively by the purchase contract on site or through written confirmations. Vehicles with a mileage over 50,000 km or older than 3 years are primarily sold to our commercial customers.

Condition: used, Year of construction: 1998, Hot-melt Case Sealer – Overview This used hot-melt case sealer by TE-CO is engineered for end-of-line industrial packaging within a used bottling line. The model 607-98 provides reliable, consistent closure of corrugated cartons using a hot-melt adhesive system, making it a proven solution for beverage production environments where wine bottles in cases must be sealed securely prior to palletizing. With robust construction and straightforward operation, it integrates seamlessly with upstream case packers and downstream palletizers to support continuous operation and optimized throughput. Manufactured by TE-CO, this second hand unit focuses on dependable carton closure, ensuring clean glue application, tight seals, and minimal maintenance demands. It is especially suitable for cases containing glass bottles in common formats used by wineries and beverage producers. Designed to work as part of a complete used bottling line or as a stand-alone machine with compatible conveyors, the 607-98 aligns with industrial packaging best practices for efficiency and product protection. Technical Specifications & Performance Data Manufacturer: TE-CO Model: 607-98 Year of manufacture: 1998 Sealing method: Hot-melt (glue) adhesive Application: Case/carton sealing after case packing Typical use: Wine bottle cases within a used bottling line Compatible bottle formats in cases: 0.75L, 1.0L, 1.5L Construction: Industrial end-of-line machine for continuous operation Operation: Inline with case packer upstream and palletizer downstream Advanced Automation & Control Systems The TE-CO hot-melt case sealer is designed for dependable automation in industrial packaging. Typical features include adhesive temperature control for consistent bonding, synchronized infeed and outfeed for smooth case flow, and safety interlocks for protected operation. Operator-friendly controls support quick adjustments and stable performance during format changes. The hot-melt application system helps deliver clean, repeatable glue patterns to ensure secure, uniform sealing. Production Line Integration Capabilities This case sealer integrates naturally into a used bottling line, operating immediately after a case-packing monoblock and before palletizing. It can be synchronized with upstream equipment such as erecting and packing systems and connected downstream to palletizers for automated material handling. The machine supports inline operation with standard conveyors and can run as a stand-alone sealer when properly fed. Fpodpfxoxywf Is Afnjb Machine Condition & Maintenance History The machine is presented as ready for operation within a second hand used bottling line context. Safety features and documentation are available, supporting commissioning and routine maintenance. Its industrial build promotes reliable service in beverage production environments.

Condition: excellent (used), Langguth E 36 XPSP Labeler Fodpel D Namefx Afnspb Labeler for self-adhesive labels, adhesive labels dispensing via vacuum plate mobile on rolls Very good condition, directly from the Produktiion!!!

Year of construction: 1998, condition: used, Technical details: Fpjdpfx Afou Rnd Donob temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is. *

Condition: new, Year of construction: 2025, functionality: fully functional, Labelling machines for self-adhesive labels. Nearly all applications and speeds are possible. 6000–9000 bottles per hour are no problem. Depending on requirements, the machines are equipped with 1 or 2 stations for self-adhesive labels—front, back, and/or wrap-around labelling. Label width: as required Label length: as required Bottle format: any format possible Further information and additional machines available on request. Fjdpfxox Dx Nco Afnepb

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - MAGELIS control system - For EVA-based hot-melt adhesive - Jointing: 2 x 1.5 kW, u=12000, 200 Hz - End trimming: 2 x 0.2 kW, automatic swiveling 0°/3°, 2 HM saw blades 140 mm - Flush trimming: 2.07 kW, with WPL heads HF 70, diameter 70 mm - Radius trimming: R2 - Radius scraper - Surface scraper - Glue pot above - Workpiece dimensions: - Minimum width: 70 mm - Thickness: 8-42 mm - Minimum length: 150 mm - Edge thickness: 0.2-6 mm - Feed rate: 12 m/min Fjdpfsxymfwjx Afnopb - Extraction port: 160 mm Dimensions: 4,500 x 1,250 x 1,300 mm Weight: 1,650 kg Availability: short notice Location: Baden-Württemberg

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AN2018080, total length: 12,860 mm, total width: 4,806 mm, type of input current: three-phase, input voltage: 400 V, feed length X-axis: 3,000 mm, working width: 350 mm, power: 25 kW (33.99 HP), TRC 1500 – Timber Repair & Cosmetic Machine Technical Description • System Overview • Process Workflow System Overview The Wintersteiger TRC 1500 is a fully automated industrial system designed to detect, repair defects in wooden boards. It combines advanced 3D scanning, high-pressure thermoplastic injection technology to deliver consistent, high-quality repairs at production speed. Defects are repaired with thermoplastic filling material using injection and application units. No filling material is wasted thanks to the precise calculation of the filling quantity and precision injection. the edges can also be filled. Key Features • Automated 3D laser triangulation defect detection • High-pressure thermoplastic injection for durable repairs • Precision finishing unit for cosmetic perfection • Independent melt temperature zones with 8 kg tank • Closed glycol-water cooling system for controlled solidification • Ethernet-based control system with remote maintenance • Unlimited product profiles and intuitive scanner interface Product Range (Workpiece Specifications) Length 500–3000 mm Width 100–350 mm Thickness 3–30 mm Production speed upto 10 m/min – depending on number and sizes of defects Filling System – Injection & Application Units • Injection Unit: • 3-axis positioning (X/Y servo-driven, Z pneumatic) Fpodpfox Dmdhjx Afnsb • Pressure-regulated melt feed • High-pressure injection • Application Unit: • 3-axis control • Fine finishing of repaired areas Faulty Spot Eye Scanner • 3D laser triangulation and high-speed camera system. • Detects defects from approx. 1 mm depth • Automatic height adjustment • 2D + 3D measurement • Adjustable parameters for wood types Melting Unit • 8 kg tank • Independent temperature zones • Integrated piston pump for constant pressure Cooling Unit • Closed glycol-water circuit • Stable temperature control Control System • Ethernet-based communication with remote maintenance • Access to PLC, scanner, servo drives • Energy-efficient regenerative drive technology Scanner Software • Processes 3D light-section profiles • Calculates defect volume and coordinates • Unlimited product programs • Intuitive operator interface High-Pressure Injection Process 1. Melting of thermoplastic material 2. Pressure and temperature regulation 3. Targeted injection into defect 4. Immediate cooling 5. Minimal surface residue • Benefits: • Low material usage • Excellent adhesion • No alteration of surrounding wood structure System Architecture • Melting unit • Heated hoses • Injection head • Cooling plate • Cooling unit with supply/return flow

Condition: not inspected (used), Year of construction: 2009, functionality: fully functional, TECHNICAL SPECIFICATIONS SIAT carton sealer and former – bottom tape (used) Description * SIAT carton former + sealer/band wrapper (American cartons) * Bottom tape configuration: automatic carton bottom closure Functions * Automatic forming: flat cardboard pick-up, box forming. Fpodpfx Afox Dkzkonsb * Bottom closure: folding of bottom flaps + application of bottom adhesive tape. * Conveying and holding of cardboard by motorised side belts. Machine identification (nameplate) * Brand: SIAT (M.J. Maillis Group) * Model: F344 SX * Year: 2009 * Serial number: 50011 * Part number: SEC0000087 * Power supply: 400 V – 50 Hz – 3 + N * Power: 1.5 kW – 6 A * Compliance: CE marking Control/Safety * Control box with HMI (screen), Start/Stop, emergency stop, main switch. * Mesh guards + machine status light column. Applications * End-of-line packaging/shipping: food processing, wine/beverage, industry, logistics, e-commerce.

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm Fpodpfx Afjlht Hzonjb max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Year of construction: 2025, condition: new, Vacuum lifters BARBARIC swiveling, including hoists, equipment package consisting of: -Vacuum lifters of uniWood B3-90 degrees - 250 comfort version, with integrated chain hoist increased load capacity: 250 kg Fpedpfx Asc Umftjfneb Suitable for the vertical and horizontal transport of flat standard plates. Vacuum generation is pneumatically by means of ejector. For lifting of permeable materials (MDF of 8 mm thick), which is Reinforced Vakkumpumpe installed. -Technical data- Chain hoist lifting speed: 0-10 m / min stepless by frequency converter Lifting height (operating range): 2.0 m Length of chain: approx. 3.5 m operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Weight: ca. 85 kg -Security system - the lift is equipped with a vacuum gauge. Release the load by means of 2 buttons -Hoists BARBARIC Load capacity 250 kg to the hoist Consisting of: Column, console and smooth-running boom. Delivery including Schiebefahrwerk and energy supply. Height: approx. 4, 2 m Bottom bracket: approx. 3.5 m Throat depth: 5 m Swivelling area approx. 250° Panning and cross travel by hand Base plate with 700 x 700 mm and mounting material. Supplied with adhesive anchors for concrete floor. This fixture requires a similarly proven concrete floor. The static verification of soil is on site to do and accordingly to document. Others