Used Adhesive for sale (608)

Condition: new, Bauer & Böcker metal base for LED work light, 210mm adhesive surface diameter, unused, in sealed original packaging, 100% functional, scope of delivery as shown in the photos. Bdjdpokk Dazjfx Adrjd

Condition: new, Siemens 1FK7060-2AF71-1RG1 - Z Synchronous motor SN:YFJ7636918802001, Z= Q31: Metal rating plate instead of adhesive plate, unused in opened original packaging, 100% functional, scope of delivery as per photos Bsdsul Ikxspfx Adrjdd

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for adjusting the units Bjdpfx Aozcau Eodrsdd Fully automatic edge magazine for roll and strip material GLU-JET adhesive application station, cartridges + PU adhesive Adhesive application using nozzle technology Sensor-controlled nozzle Workpiece height 6-60 mm Automatic adhesive height adjustment High-quality 3-roller pressure unit, 1st roller motorized Trimming unit, pneumatically controlled for roll and strip material up to 6 mm edge thickness With pneumatic adjustment of the trimming saw angle from 0-10° Routing unit, flush trimming 6 mm, radius routing - chamfer routing - 15° Corner copying unit - 3 mm edge thickness Scraping unit for chamfers and radii with 2 scraping blade holders Surface scraping unit - finishing Buffing unit Spray device in the infeed and outfeed area, as well as for PU Machine with all processing tools Machine is WORKSHOP TESTED From a craft business First delivery 2019 Available from stock in Lieboch

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND Authorized Dealer - All items in stock! Bjdpfx Ajxflftsdrjdd !! SPECIAL OFFER !! SIEGMUND Retro Welding Table 2400x1200x200 mm, accessories included SIEGMUND welding table just like 25 years ago with plasma nitriding and modern table legs Product description - Table dimensions: 2400x1200x200 mm - High-quality S355J2 steel with plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole diameter 28 mm - Drill holes in 100x100 mm grid - Corners, edges, and drill holes chamfered at 45° - Side panel height 200 mm - Drill holes in side panels in a diagonal grid - Construction reinforced with ribs Plasma-nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / higher load-bearing capacity Specifications: - 28-hole pattern / Dimensions 2400 x 1200 x 200 mm - Plasma-nitrided version - Includes 4x base feet (basic configuration) - Includes accessory set (see Image 3): * 6x 280604 * 12x 280511 * 8x 280420.N * 2x 280110.N * 1x 283999

Condition: good (used), Year of construction: 2011, Single-sided edge banding machine in right-hand configuration with workpiece return, for hot melt or/and PU gluing, used, manufactured in 2011; approx. 8700 operating hours Edge thickness: 0.4 – 10 mm Workpiece dimensions: Width min.: 70 mm Height min.: 8 mm Height max.: 60 mm Length min.: 150 mm Feed speed: 14 – 20 m/min, stepless Glue application: Glue application roller with Vario-melt metering system Working height: 900 mm Machine dimensions: Machine height: 1,600 mm Machine width: 1,100 mm Machine length: 8,200 mm Machine weight: 4,000 kg Machine equipped with: -Double roller pressure with electronic positioning -Pneumatic control of all units from the central touch screen control via Beckhoff industrial PC -CM – CombiMelt gluing system: Processing units: -Fk -JOINT PROCESSING UNIT for attaching chipboard with 2 HF motors, 2.2 kW, 200 Hz, 12000 rpm, operating in forward and reverse direction, length-controlled. Tool: DIA joint set Ø 85 x 45 x 30, z 3, for board thicknesses up to 42 mm -AKM – Edge magazine for the automatic feeding of strip edges, with spiked roller feed and pneumatic. pressure bar. Including optical edge monitoring -M4+1 – Four-fold magazine, automatic roller retraction. For holding four edge rolls. With variable edge shaft for interchangeable edge. With automatic selection menu. -K 13 – DOUBLE TRIMMING UNIT with 2 HF motors 0.6 kW, 200 Hz, 12000 rpm, motors and saw blades pneumatically adjustable 0/5° -K 160 2 HM saw blades 140 x 3.2 x 16 mm, Z 36 -Bfc – FLUSH TRIMMING UNIT for pre-trimming the glued edges in the reverse direction. Sensing on one side, feed via program control. 2 HF motors 0.7 kW, 200 Hz, 12,000 rpm Tool: 2 HM – reversible cutting heads Ø 70 x 20 x 16 mm, z 4 (HF70). -HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction. Sensing on both sides, automatically adjusted to edge thickness via program control. With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm Tool: 2 HM reversible cutting heads Ø 70 x 20 x 16 mm, Z 4 (HF70), can also be fitted with radius tools -HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction. Sensing on both sides, automatically adjusted to edge thickness via program control. With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm Tool: 2 HM radius reversible knife heads (AR 73), Ø 73 x 16 x 16, z 3 for reversible inserts R 1 – R 3. -AKF – Automated COPY MILLING with two separate working spindles for top and bottom. 2 HF motors 0.37 kW, 200 Hz, 12000 rpm Tool: 2 PCD diamond radius tools Ø 73 x 13 x Ø 16. With integrated extraction. -AZK 4 – autom. operated SCRAPE BLADE CHANGING UNIT -ZKf – SURFACE SCRAPE BLADE UNIT with fine sensing device for removing residual hot melt adhesive in the joint area – with extraction. Additional equipment: -AS – Antistatic spray device, double, on glue joint -GS Lubricant spray device for spraying antistatic lubricant onto the edge surface, electronically controlled -RS – Cleaning set with 4-fold spray device and fine wiping device for cleaning the surface -KEO-c – EDGE CLEANING, oscillating and automatically adjustable. 2 motors 0.2 kW, with 2 cloth disks -WE – Angle insertion aid as a sliding carriage, foldable. For narrow parts. Bjdpfszb Iuqox Adrodd Interface for workpiece return Ligmatech ZHR 05 or comparable

Condition: used, Year of construction: 2008, machine/vehicle number: MBI20, Used Packaging Monoblock TMG COMBI 3000 BPHTechnical Specifications & Performance DataThis Casepacking Monoblock is engineered for secondary packaging of bottles with integrated erecting, packing, partition inserting, and sealing in a single compact frame. Manufactured by TMG, model COMBI 15 N-DA, this second hand unit is optimized for beverage production and industrial packaging lines that require reliable, continuous operation.Manufacturer: TMGModel: COMBI 15 N-DAYear: 2008Category: Casepacking MonoblockProduction speed: up to 3000 bph (bottles per hour)Carton formats: 6-bottle cartons; 12-bottle cartonsContainer compatibility: Glass bottlesBottle format handled: 1.5LIntegrated sections: carton forming, high-capacity magazine, case packing, automatic partition inserter, top-and-bottom sealingClosure system: adhesive tape (top and bottom)Control system: PLC-managed operationsAdvanced Automation & Control SystemsThe monoblock features PLC-based controls for synchronized operation of each module, ensuring stable throughput and high repeatability across shifts. Automated sequencing coordinates carton erection, bottle grouping and loading, partition insertion, and closure, minimizing manual intervention. The control logic supports quick stops and restarts, fault diagnostics, and consistent performance for demanding production schedules typical of a used bottling line.Centralized PLC control for all stationsAutomated timing and interlocks between modulesConsistent, repeatable handling for glass packagingDesigned for efficient format adjustments between 6 and 12 bottlesProduction Line Integration CapabilitiesThis monoblock integrates seamlessly into beverage production environments, upstream of palletizing. It can operate inline with conveyors from filling, labeling, and inspection equipment or as a standalone packaging center with infeed and outfeed conveyors. The integrated high-capacity magazine ensures continuous supply of cartons, while automated case closing with tape simplifies downstream logistics.Inline or standalone operationHigh-capacity carton magazine for extended autonomySuitable for wine bottling and other glass-based productsHandles 1.5L bottles; adaptable to 6 or 12 bottle case patternsMachine Condition & Maintenance HistoryThis second hand Casepacking Monoblock is presented in used condition and suitable for integration into an operational packaging line. Built in 2008, it aligns with industrial packaging standards of its generation and is configured for glass bottle handling with tape sealing. Its PLC-managed design supports reliable operation and straightforward maintenance routines typical of robust TMG engineering.Operational Performance & VersatilityDesigned to protect premium products such as sparkling wine, the monoblock combines precise bottle loading with automatic partition insertion for... Bodpszb Ikrofx Adrodd

Condition: reconditioned (used), functionality: fully functional, Horizon BQ-470 – Automatic 4-Clamp EVA/PUR Perfect Binder Manufacturer: Horizon Model: BQ-470 Type: Automatic 4-clamp PUR perfect binder The Horizon BQ-470 is a professional, high-performance perfect binder designed for demanding production environments. Equipped with 4 clamps, fully automatic setup via a touchscreen, and an interchangeable EVA/PUR adhesive system, it offers great flexibility for the production of books, catalogs, magazines, and short or medium runs of high quality. Key Features: * Fully automatic setup via a color touchscreen. * 4 production clamps. * Automatic spine milling and notching. * Double applicator roller for adhesive and side gluing. * Automatic cover feeding via vacuum. * Automatic adjustments for thickness, scoring, and registration. * Outfeed conveyor and automatic stacker. * Compact design with front access for operation and maintenance. Technical Specifications: * Maximum speed: up to 1,350 cycles/hour with EVA. * Maximum speed: up to 1,000 cycles/hour with PUR. * Book thickness: 1 to 65 mm. * Maximum block format: 320 x 320 mm. * Minimum block format: 145 x 105 mm. * Maximum cover format: 320 x 660 mm. * Cover weight: up to 348 g/m² on coated paper. Advantages: * Extremely fast job changes. * Professional binding quality for offset and digital printing. Bdodpfx Ajzd Eauodred * Compatible with EVA and PUR production. * Excellent book opening and high binding strength. * Ideal for commercial printers, digital printing, and publishing production centers. A high-end machine recognized for its reliability, automation, and binding quality, suitable for industrial production and value-added jobs. 🚀📚

Condition: used, Year of construction: 2003, machine/vehicle number: 0281062425, Used Edge Banding Machine Year of manufacture: 2003 Equipped with a gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Glue application via roller (co-rotating and counter-rotating modes) Features: Automatic edge magazine (coil and strip material) Pressure zone with pneumatically driven main pressure roller and additional rollers for optimal bonding of the glue layer Centrally adjustable top pressure Central manual lubrication of the chain conveyor Control panel at the machine infeed Machining Units: End trimming unit (saw units) for front and rear overhang Bedpoy Nxgnjfx Adrsdd 2 motors, each 0.18 kW Swivel range: 0–15° Flush trimming unit (top and bottom) with vertical and horizontal tracing Swivel range: 0–15° 2 motors with interchangeable cutters (straight/radius) Digital counters for fast and precise adjustments Pneumatic two-point adjustment Buffing unit for final finishing Additional Equipment: Extendable support table up to 350 mm Integrated section control (contactless operation) Settings via keyboard and LED display Technical Data: Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Location: Bulgaria

Condition: excellent (used), Year of construction: 2022, Manufacturer: BIESSE Model: AKRON 1440 A Category: Edge banding machine Year of manufacture: 2022 Availability: short notice Operational status: disassembled/stored Technical data Maximum edge banding thickness: 12 mm Maximum panel thickness: 60 mm Maximum thickness of roller material: 3 mm Minimum workpiece length: 140 mm Minimum workpiece width: 50 mm Minimum feed rate: 12 m/min Maximum feed rate: 18 m/min Feed rate: stepless Height adjustment: motorized Belt overpressure Gluing system: granulate Glue reservoir: top Quick-change glue reservoir Suitable for PUR adhesives Strip magazine Spraying device Edge trimming unit Preheating zone Pressure zone, NC-controlled Miter saw unit: 2 motors Edge trimming/radius/chamfer stations: 1 Corner copying unit: 2 motors Pulling blade unit Profile pulling blade, flat pulling blade Smoothing unit Nesting equipment Edge trimming/radius/chamfer stations, profile pulling blade Units controlled by timer NC axis(es) Bsdpfjzb Aicox Adredd Profile change: automatic Edge trimming/radius/chamfer stations Design: left-hand machine Machine length: 5,610 mm Control system: BIESSE SMART TOUCH 23" Conformity marking: CE marking, EAC marking Total connection: 13 kW Weight approx.: 2,250 kg Location: at customer's site - available immediately - As it is disassembled/stored.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, The Nordson FoamMelt 200 (FM 200) is a specialized dispensing system that mixes hot melt adhesives with an inert gas (such as nitrogen) to create a closed-cell foam. This process reduces adhesive consumption by as much as 50% to 65% while improving bond performance. Bjdpoy N Ahcjfx Adredd Applications: Widely used for bonding, sealing, gluing, and gasket making (gasketing) in the automotive and packaging industries. Benefits of FoamMelt Technology Faster Curing: The foam cools down faster, enabling higher production speeds. Better Filling Properties: The volume increase due to gas makes it ideal for filling gaps. Improved Safety: The lower heat density of the foam reduces the risk of burns for operators.

Year of construction: 2020, operating hours: 10 h, condition: like new (used), functionality: fully functional, Automatic line for rinsing, filling, pasteurizing, drying and packaging of glass juice bottles consisting of following modules: 1. SEMI AUTOMATIC DEPALLETIZER (model: Depal 512 – mini) for unpacking glass bottles from pallets, 1 operator required to put the pallet into the machine and remove the cardboard that is inserted in between the glass bottle layers 2. UNIVERSAL RINSING MACHINE (model: IND-Wash 56 S2) for steam sanitizing and hot water rinsing of the bottles before filling 3. ROTARY FILLING MACHINE (model: IND-Dose 46 PO-12) for filling of the hot product into the glass cylinder shape bottles 4. CLOSING MACHINE FOR TWIST OFF CAPS (model: IND-Close 12E) for vacuum closing of the filled bottles using steam injection induced vacuum system 5. PASTEURIZATION AND COOLING TUNEL (model: PT 42-9) for further continuous pasteurization of the product 6. VACUUM TESTING MACHINE (model: IND-Test 61) for selection and eviction of the improperly closed bottles 7. DRYING MACHINE (model: IND-Blow 86) for drying the residual moisture on the battle surface before applying labels 8. LINEAR LABELLING MACHINE FOR APPLICATION OF SELF-ADHESIVE LABELS (model: IND-Lab 32B) with top (over the cap) and side application of the labels on cylindrical bottles 9. AUTOMATIC GROUPING AND SHRINK-WRAPPING MACHINE WITH TRAY AND FILM (model: IND-pack 29 T) for packing the bottles onto cardboard trays in various configurations per different bottle sizes Bdedpjzdr Iljfx Adrsd 10. SET OF FLAT TOP CHAIN CONVEYORS (model: IND-Trans 71) connecting the various modules of the line (conveyors between rinsing, filling and closing sections with top covers)

Condition: good (used), Year of construction: 2014, 2x carton packaging machines, carton erectors, B&E Equipment / I-Pak – used: Price per unit, ex works: only €9,950 (net), with self-dismantling! Manufacturer: B&E Equipment / I-Pak Type: BA18H Year of manufacture: 2014 Serial numbers: 14/0558 and 14/0557 Bedpfezbyn Nex Adrodd Each unit includes 1x Nordson ProBlue 4 hot melt adhesive applicator with 4-liter hot melt adhesive Weight: approx. 1,500 kg 400V, 8kW, 15A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Condition: good (used), Year of construction: 2014, Cardboard packaging machine, carton erector, B&E Equipment / I-Pak – used: Bdodpfx Adszbynporjd Price ex works: only €9,950 (net), if disassembled by the buyer! Manufacturer: B&E Equipment / I-Pak Type: BA20-2 Year of manufacture: 2014 Serial number: 14/0559 Each unit comes with 1x Nordson ProBlue 4 hot melt adhesive applicator and 4 liters of hot melt adhesive. Weight: approx. 1,250 kg 400V, 7kW, 16A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Condition: new, functionality: fully functional, Carton Erector Advanced 400 Fully Automatic Net Price: €24,500 Features of the System: 1. Modern design with robotic arm Bodpfx Aeya Dh Dsdrjdd 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L145–400 mm (up to 650 mm on request) 2. Product width: W80–350 mm (up to 500 mm on request) 3. Product height: H150–350 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 48 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2450 x 1380 mm 10. Air consumption depends on packing speed Carton Erector Advanced 500 Fully Automatic Net Price: €27,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L275–500 mm (up to 650 mm on request) 2. Product width: W140–400 mm (up to 500 mm on request) 3. Product height: H140–400 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 58 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2850 x 2000 x 1400 mm 10. Air consumption depends on packing speed Carton Erector Advanced 650 Fully Automatic Net Price: €29,900 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L285–650 mm 2. Product width: W280–500 mm 3. Product height: H150–500 mm 4. Packing speed: 5–25 cartons/min 5. Maximum tape width: max 75 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.35 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2920 x 2100 x 1500 mm 10. Air consumption depends on packing speed

Condition: excellent (used), Year of construction: 2002, Speed: 14,000 sheets per hour Format (cm): max.: 48 x 32 The line consists of: - 4 x Inserter stations Bdsdpfxexmhrfe Adred - 2 x Card inserter stations with adhesive unit (can also be used as standard inserter stations – top loading) - 1 x Cover feeder - 1 x Duplex sheet inspection unit - 1 x Stapling unit with (Hohner SB 50 heads) 2+2 - 1 x Three-knife trimmer with center cut - 1 x Cross stacker RIMA

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 12075, WITH BASE CABINET Book format: 320 x 220 mm (Max. 320 x 300 mm) Cover format: Cover size: 330 x 480 mm (Max. 330 x 680 mm) Book thickness: 2 - 50 mm Cycle speed: up to 300 cycles per hour Heat-up time: 30 - 40 minutes Equipment / Additional information: Bdodpeup A Dnefx Adrjd Adhesive: Planamelt R 1323-2

Condition: used, mileage: 366,920 km, power: 251 kW (341.26 HP), first registration: 03/2020, fuel type: diesel, number of seats: 29, gearing type: automatic, emission class: euro6, color: beige, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Our internal vehicle number: 1187 Solaris New Urbino IV 12 Power: 251 kW Emission class: Euro 6D Vehicle class: M3 First registration: 03/2020 * 1st owner in Germany, with inspection book * Voith automatic transmission 1/2/3/D/N/R * 28 + 1 seats * LAWO destination display (front/side/rear) with control unit * Electric sunblind * Air conditioning * Reversing camera * Door leaf locking system * Folding ramp * Large multi-purpose area – wheelchair / stroller * Convector heater * 2 folding windows installed on each side * Original mileage Bodoy E D Nmopfx Adredd * Vehicle was branded – with adhesive film * Pre-wiring for TFT screen * NEW PAINT in RAL 9016 traffic white, applied in 05/2026 Note: Vehicle may be registered – mileage and condition may vary. The customer is obliged to independently verify the condition and equipment of the goods / vehicle! All information is provided without guarantee. We reserve the right to sell the vehicle in the meantime. We refer to our general terms and conditions.

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Bedjlht Hzspfx Adrsdd Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment (radius, bevel, flush milling)

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only affordable and space-saving, but it also boasts the features you need to process edges perfectly from the start: diamond-tipped joiner cutters guarantee excellently prepared workpieces for edgebanding. The equipment includes a joiner unit (up to 2 mm cutting depth), the top-mounted quick-heating glue container, a miter saw, and a combination router. Optionally, the F 2 can also be equipped with a surface scraping blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Bdodpfx Adei Am U Dorod Equipment: F2 - 10 m/min Edgebanding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm; joiner cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation including glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency router station (approx. 12,000 rpm) with separate pneumatic router adjustment and interchangeable blade router (combination design), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Year of construction: 2025, condition: new, Vacuum lifter BARBARIC, swiveling, including column-mounted slewing crane Equipment package consisting of: - Vacuum lifter uniWood B3-90° - 250 Comfort version, with integrated chain hoist reinforced, lifting capacity: 250 kg Suitable for vertical and horizontal transport of flat, commercially available panels. Vacuum generation is achieved pneumatically via an ejector. For lifting porous materials (MDF with a thickness of more than 8 mm), a reinforced vacuum pump is installed. -- Technical data -- Lifting speed of chain hoist: 0-10 m/min infinitely variable via frequency inverter Lifting height (operating range): 2.0 m Chain length: approx. 3.5 m Operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Weight: approx. 85 kg -- Safety system -- The lifter is equipped with a vacuum pressure gauge. Releasing the load using a 2-button function. - Column-mounted slewing crane BARBARIC Load capacity 250 kg on the lifting device Consisting of: Bedpfx Aec Umftodredd Column, console and low-friction jib. Delivery including sliding carriage and power supply. Overall height: approx. 4.2 m Lower edge of jib: approx. 3.5 m Outreach: 5 m Slewing range approx. 250° Manual slewing and trolley movement Base plate with 700 x 700 mm and fastening material. Delivery with adhesive anchor for concrete floor. A suitably reinforced concrete floor is required for this fastening. The static verification of the floor must be carried out on site and documented accordingly. Other versions and lengths available upon request.

Condition: new, Year of construction: 2025, Hebrock F 4 For the complete processing of your panels For those who don’t want to compromise. With the F 4, we offer you a model that allows you to produce completely finished edges on a machine length of only 4 meters. The F 4 is not only space-saving but also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Extraction nozzle: Ø 1 x 140 mm PLC control with 10″ touchscreen Top-mounted rapid heating glue tank (maintenance-free) Support plate for edge material Automatic central lubrication (miter saw, corner router) Optical display for workpiece sequence Outrigger (extendable to the front) Quick-change unit preparation, including glue change device for PUR processing Surface scraping blade with dual contact Pneumatic roller capping (scissors-type design, Hebrock system) Double roller pressure (ball-bearing mounted) Transport chain with permanently screwed-on special chain plates Edge router Routing unit Miter saw Bdedpfx Aohqadcsdred Corner router Accessories: F4/09 Radius scraping blade (incl. pneumatic lift) F4/09/4 Multi radius scraping blade (R1/R2) F4/30 Pneumatic 3-point adjustment Location: In stock, 54634 Bitburg - available on short notice -

Condition: new, Year of construction: 2024, Osama Automatic 4-Roller Glue Application Machine Model: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. pass-through height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Diameter of application rollers: 250 mm Motor power: 3 kW Electrical: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer boards, particle boards, composites, and gypsum plasterboard. This type of gluing machine allows for precise and homogeneous dosing of adhesive, taking into account the corrugation of the rollers, which must be suitable for the respective production requirements. The heavy-duty structure and the roller cores, manufactured with greater thickness compared to earlier models, enable a high production rate without issues and bonding of materials up to 2200 mm in width. Roller removal for maintenance is straightforward, as the supports can be split in two via a simple bayonet coupling. The gluing machine can also be equipped with different accessories, such as an electronic speed controller, automatic roller washing device, and an automatic upper roller lifting mechanism with position display on the control panel. The S4R/P gluing machine is used in various production sectors, including construction and the manufacturing of foam panels and mattresses. Equipment: Bdodpou I R Utefx Adrjd - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm with PVC rollers, 60 mm diameter, 200 mm spacing - Outfeed table TDF 1400x3000 mm with disc rollers, D: 122 mm, stainless steel Location: in stock at 54634 Bitburg - Available immediately -

Condition: as good as new (ex-display), Year of construction: 2026, - NEW - Manufacturer: Ganner Gannomat Type: SELEKTA 253 220 V, 1 phase, 50 Hz complete in standard version with: - Fully automatic electronic control with program selector switch COILING-GLUING-INSERTING - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of the dowel feed rate - Automatic dowel diameter and dowel length control with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed gluing system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer via time preselection through electronic control - Selector switch GLUE/WATER for flushing/cleaning the gluing system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and dirty water collection container) - Control light for glue residue level indicator in the glue container - 1 stainless steel container for 5 kg of glue and 1 stainless steel container for 5 l of water for flushing/cleaning - 4 rollers for moving the machine including 1 gun for dowels Ø 8 mm, dowel length 25 - 40 mm Insertion allowance 7 - 20 mm Bdjdodwi Rkepfx Adred Air connection: 6 bar Price ex warehouse 54634 Bitburg - immediately available -

Year of construction: 2026, condition: as good as new (ex-display), Vacuum membrane press The VP series is the optimal solution for woodworking. The VP 3000 is equipped with heating technology, which reduces the drying time of the adhesive, thereby increasing performance. Possible applications: Veneering / Form gluing / Covering... Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of curved and laminated components Bodpfx Asdvltysdrsdd The heating system is equipped with temperature control Rubber membrane 2.5 mm Tabletop is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of the vacuum / tank capacity 15 l Working area: 3000x1500mm Heating system temperature: Max. 60 degrees C Heating system: 4.5 kW Pump power: 0.75 kW Vacuum pump flow rate: 25 m3/h Rubber membrane External dimensions: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Available from stock in 54634 Bitburg - free loading -

Condition: new, Year of construction: 2025, The Hebrock K 36 Top model with motorized adjustment - showroom model - new machine - Bjdoi Am Ukopfx Adrodd - immediately available - This popular Hebrock model offers unparalleled possibilities. Developed for the highest standards, the K 36 stands for absolute reliability and productivity in daily use. By providing the option to equip the machine with a stepped milling cutter and a multi-radius draw knife, Hebrock sets new standards in the field of perfect edge processing for various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 minutes. Max. edge thickness: 3 mm Min./Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed rate: approx. 15 m/min. Ready for operation: approx. 6 min. Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3-phase – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (L x W x H) Weight: 1750 kg Equipment: Hebrock K 36. - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touchscreen), hot melt adhesive application to the workpiece for edge material up to 3 mm; edge trimming cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free, coated glue reservoir with replaceable reservoir preparation incl. glue outlet device, high-frequency double-motor trimming saw station (approx. 12000 rpm), high-frequency milling station (approx. 12000 rpm) with pneumatic milling adjustment and interchangeable milling cutter (combination version), corner rounding cutter, radius draw knife, flat draw knife (incl. pneumatic retracting device), finishing station, robust chain drive, ball-bearing double roller pressure, aggregate sight window from the rear of the machine and the operator side, signal lamp for workpiece sequence, extendable workpiece support, feed rate approx. 15 m/min, edge banding up to 60 mm workpiece thickness 36/08/1 Quick-change preparation for corner cutter 36/08/2/1 additional interchangeable motor for corner cutter R=1 36/09/1 Multi-radius draw knife 36/24/1 Release agent spray device 36/24/2 Cleaning agent spray device 36/25. Protective spray for edge 36/27 Nesting (1 milling station + 1 radius draw knife) 36/30 Pneumatic 3-point adjustment 36/30/1 Multi-tool for high-frequency milling station (R2/R1/chamfer) 36/45 Axis package with motorized adjustment for panel, edge thickness and rabbet milling depth Location: in stock at warehouse 54634 Bitburg - immediately available -