Used 5 Pzs 625 for sale (19,976)

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8 units of hydraulic BWP pendulum axle assemblies with remote control. Technically permissible gross weight 219,000 kg Technically permissible payload 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed heavy-duty trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator low-bed section up to 5 meters, featuring 4 wheel recesses, ABS, technically permissible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck type STH/ST Year of manufacture: 2002 Can be combined with heavy-duty module undercarriages, drivable loading platforms. Unladen weight approx. 5,900 kg Permissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" pin Removable aluminum side walls Fully hydraulically adjustable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty module First registration: 14.11.2001 As a single module, technically permissible total weight: 108,000 kg, technically permissible axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendulum axles, 24 wheels, tire size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into chassis: hydromechanical dual-circuit all-wheel forced steering with a maximum aggregate steering angle of 60°, integrated hydraulic oil tank Optimized bolt-lug coupling at front and rear for longitudinal combinations Single-tired pendulum axle assemblies with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles BPW axles with drum brake and ABS, technically permissible axle load of 34 t at 5 km/h 3rd module: Extendable low-bed heavy-duty module - Excavator bridge Year of manufacture: 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with drive-on module at the front Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in low-bed and 175.6 t in overall STHP8 (3+5) module possible. Unladen weight 11,900 kg Front and rear hydraulic bolt-lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty module First registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tired hydraulic pendulum axle assemblies with 4 wheels per axle line, 20 wheels (tire size 285/70 R 19.5) Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the configuration. For the special low-bed combination, a current manufacturer's certificate from Goldhofer is available. The low-bed trailer can be tested at our facility. Price NET excluding 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Dcodpfx Ajxcdf Tsb Tor

Condition: good (used), Pipe tap Make Reishauer 5/8 GG Dcedpfx Absdx Uzhs Tor 85 mm long

Year of construction: 2020, condition: new, functionality: fully functional, Brand new in the box, never used. Please check out our other listings as well. Dcedpfx Abewiqggo Tsr

Condition: used, fuel type: diesel, overall weight: 8,500 kg, Year of construction: 2007, machine/vehicle number: 524899K, Please submit inquiries exclusively by email or directly via Machineseeker. Dcedpfx Aexmg I Eeb Tor

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, spindle bore: 20 mm, CNC Fanuc 32i MACHINE CONCEPT Number of linear axes + C axes + B axes: mm 5 + 1 + 0 Number of spindles: 2 Number of channels: 2 MAIN SPINDLE Maximum bar passage: mm 20 Number of revolutions: rpm 10,000 Power (S2 30 min/S1): kW 3.7 / 2.2 Torque (S2 30 min/S1): Nm 23.6 / 14 COUNTER SPINDLE Maximum bar passage: mm 20 Number of revolutions: rpm 10,000 Power (S2 30 min/S1): kW 2.2 / 1.5 Torque (S2 30 min/S1): Nm 7.0 / 4.8 WORK AREA Z1 stroke: mm 60 Tool holders 1 stroke X1 / Y1: mm 50 / 325 Counter spindle stroke X2 / Z2: mm 220 / 170 Dcodpswifrksfx Ab Tjr Rapid speed on linear axes X1, Z1, X2, Z2/Y1, Y2: m/min 32/32 Acceleration of linear axes: m/s2 5 TOOL HOLDERS ON SLIDE 1 Fixed turning tools: 6 Tools for frontal and secondary machining: 6/3 Driven tools: 2 + 2 Maximum number of revolutions: rpm 6,000 Power (S3 40% / S1): kW 1.3 / 0.8 Torque (S3 40% / S1): Nm 2 / 1.3 Power (S3 40% / S1): kW 1.3 / 0.8 Torque (S3 40% / S1): Nm 3.5 / 3 TOOL HOLDER ON SLIDE Y2 Fixed/motorized tools for secondary machining: 4/0 Maximum number of revolutions: rpm 6,000 Power (S3 40% / S1): kW 1.2 / 1 Torque (S3 40% / S1): Nm 2.5 / 2

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 1,700 h, functionality: fully functional, machine/vehicle number: MP7/5/P, travel distance X-axis: 730 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, feed length X-axis: 585 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, spindle speed (min.): 1 rpm, spindle speed (max.): 42,000 rpm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, type of input current: three-phase, table load: 60 kg, workpiece weight (max.): 60 kg, overall weight: 8,000 kg, MP7-5 Axis with integrated pallet changer 5-axis with rotary/swivel axis Travel range X/Y/Z 585x250x400 mm Travel range B +/- 105 degrees Travel range C continuous Workpiece weight 60 kg Distance machine table to spindle nose 450 mm Machine dimensions (W x D x H) 2845 x 2370 x 3000 mm Machine weight 8000 kg Dsdoxlctbjpfx Ab Tocr Spindle speed 42,000 rpm Equipment: Control: Heidenhain TNC640 Main spindle: HVC140 HSK-E40 with rotary union for internal media supply - Max. speed 42,000 rpm - Milling power S1/S6 10 kW / 13 kW - For internal coolant supply, air and emulsion Oil mist extraction for oil/emulsion Dust extraction: L-CUT Machine-integrated workpiece changer for 36x EROWA ITS50 or 18x EROWA ITS115 Hand-held control unit with electronic handwheel and enabling switch Measuring probe system: Renishaw OMP400 Aerosol DRY LUBRICATION (ADL) - Precise dosage of media externally and through the tool Rotary table chuck: EROWA PowerChuck P on 5-axis Blum laser: LC50 Media distributor: MHT Tool changer 90 positions, HSK E40 Warranty: 12 months Transport Initial commissioning on site Training

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Dedpfx Abjxcdgqs Tocr Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: excellent (used), Year of construction: 2016, Complete line for packing products like flour, semolina etc into small, fold top paper bags. Was installed new in 2017. Photos show the machine set-up for potatoes. Price of machine without potato weigher is EUR 25,000 Dodpettwt Aefx Ab Tocr

Condition: good (used), Item: AJ-Hamba BK6005/5 Filling machine for cups HAMBA BK 6005/5 cup filling and sealing machine Made in Germany In good used condition. The machine can be used for filling yogurt and similar products in cups. Djdpfx Asi Atkqjb Tocr Capacity: 8000 - 10000 cups/ h Lanes: 5-Lanes longitudinal machine Actual Cup-size: Ø 75 mm Height: 90 mm Main Filler: - manufacturer: Hamba - filling range: 100 cm³ to 250 cm³; - cleaning: CIP-able Closure: Sealing Date Device: Stamp Measurements (lxwxh): 4,3 m x 1,3 m x 2,2 m Power: 380 V; 21 A; 8 KW

Condition: new, range L-W-H 675 x 510 x 880 mm weight 56 kg 5 St. Professional tool trolley for workshop equipment. Internal dimensions of the upper 4 drawers 56 x 43 x 10 cm. Inner dimensions of the lower drawer 56 x 43 x 17 cm. Dcsdju Iml Ijpfx Ab Ter Dimensions of the wheels 100 x 30 mm.

Condition: used, power: 89 kW (121.01 HP), fuel type: diesel, Year of construction: 2022, Empty weight: 15.200 kg Make of engine: Cummins Dcsdpot Uydpofx Ab Tjr Top speed: 3 km/h Serial number: SWE155F00151 Transport dimensions (LxWxH): 7.83x2.6x2.83 Please contact PFEIFER GROUP for more information

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 2,110 h, functionality: fully functional, machine/vehicle number: 7846, travel distance X-axis: 455 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, total height: 2,600 mm, total width: 2,160 mm, total length: 2,600 mm, table width: 400 mm, type of input current: three-phase, distance table to quill: 450 mm, table length: 820 mm, warranty duration: 12 months, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 2,800 kg, table load: 800 kg, input frequency: 50 Hz, Equipment: documentation/manual, EDM312MF30 + AWEX100/5 100 electrode positions 5 pallet positions 320x320mm Operating hours: 2110 h Technical data: Travel paths: 455x300x300mm Workpiece clamping table: 820x400mm Tank dimensions: 900x520mm Filling height: 300mm Distance between table/electrode holder: 150/450mm Max. workpiece weight: 800 kg Maximum dielectric volume: 700 liters Dimensions (W x D x H): 2160x2000x2610mm Machine weight: 2500 kg Power connection: 3/N/PE 400/230V 50Hz Power consumption: 6.7 kVA Equipment: Color: light grey Dcjdpoxlchfofx Ab Tsr MF30 V3.2 operator interface Touch screen display Exogen generator 60A Direct measuring system on all axes Cartridge filter Integrated cooling unit CO₂ extinguishing system C-axis 100/min with holding brake Handheld control unit with enabling button Lowerable tank, automatic positioning Erowa chuck 12-month warranty Transport On-site commissioning Training

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Djdpfxexcdfgs Ab Tjcr Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Year of construction: 1994, condition: used, machine/vehicle number: 8084/77/01, Caliber Table Profile Extrusion Djdpfx Abexghqhj Tecr

Condition: good (used), scrubber dryer, floor cleaning machine, mop machine, gearbox Dcjdpfx Abjxbcc Ie Ter -Manufacturer: Gansow, 4 pieces gearbox from scrubber dryer SG879/5 .: 122154 -Bolt circle: Ø 90 mm / M8 -Shaft: Ø 15 x 55 mm -Translation: i= 9:1 -Rotation direction: 2x right-hand / 2x left-hand rotation -Shipping/Price: complete -Dimensions each: 230/120/H120 mm -Weight: 4.0 kg/piece

Condition: new, length 1200 mm width 600 mm height over floor 860 mm dimensions 1200 x 600 x 400 m weight 47 kg Dedpfx Abou Imm So Tecr Workbench with 5 drawers, 1 door and solid wood worktop Dimensions 1200x600x25mm Drawer dimensions (internal) 430 x 400 x 110 mm Door dimensions 460 x 380 mm

Condition: good (used), Year of construction: 1984, max. wheel diameter 400 mm Dcedpfx Ajv T Nqasb Tor gear width 275 mm max. module 6 weight of the machine ca. 5,5 t

Condition: good (used), Year of construction: 1991, machine/vehicle number: 91212037, Offer 24328 Technical data: - max. working width 2540 mm - max. material thickness at 40 kg / mm² strength 5 mm - Bending angle setting electronically preselectable 0 - 135 ° - automatic sequence control for a complete work process - Largest opening width / stroke of the upper beam 350 mm - Height adjustability - of the bending beam 100 mm - of the lower beam 100 mm - upper beam drive 400 V / 4 kW - Bending beam drive 400 V / 4 kW - man. Backgauge - E-foot switch - Space requirement approx. W 3800 x H 1650 x D 2500 mm Dodot St Szspfx Ab Tocr - Weight approx. 5500 kg

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8 units of hydraulic BWP pendulum axle assemblies with remote control. Technically permissible gross weight 219,000 kg Technically permissible payload 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed heavy-duty trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator low-bed section up to 5 meters, featuring 4 wheel recesses, ABS, technically permissible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck type STH/ST Year of manufacture: 2002 Can be combined with heavy-duty module undercarriages, drivable loading platforms. Unladen weight approx. 5,900 kg Permissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" pin Removable aluminum side walls Fully hydraulically adjustable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty module First registration: 14.11.2001 As a single module, technically permissible total weight: 108,000 kg, technically permissible axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendulum axles, 24 wheels, tire size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into chassis: hydromechanical dual-circuit all-wheel forced steering with a maximum aggregate steering angle of 60°, integrated hydraulic oil tank Optimized bolt-lug coupling at front and rear for longitudinal combinations Single-tired pendulum axle assemblies with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles BPW axles with drum brake and ABS, technically permissible axle load of 34 t at 5 km/h 3rd module: Extendable low-bed heavy-duty module - Excavator bridge Year of manufacture: 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with drive-on module at the front Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in low-bed and 175.6 t in overall STHP8 (3+5) module possible. Unladen weight 11,900 kg Front and rear hydraulic bolt-lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty module First registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tired hydraulic pendulum axle assemblies with 4 wheels per axle line, 20 wheels (tire size 285/70 R 19.5) Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the configuration. For the special low-bed combination, a current manufacturer's certificate from Goldhofer is available. The low-bed trailer can be tested at our facility. Price NET excluding 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Dcodpfx Ajxcdfaeb Tor

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: PC-00156, Year of construction: 2008, load capacity: 7,000 kg, lifting height: 3,800 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, TECHNICAL DETAILS Lifting capacity: 7,000 kg Lifting height: 3,800 mm Overall height: 2,800 mm Mast: Duplex Fork length: 1,200 mm Maximum fork width: 2,000 mm Minimum fork width: 350 mm Number of wheels: 6 MACHINE DETAILS Fuel type: Diesel Unladen weight: 10,561 kg Dimensions (L x W x H): 3,600 x 2,100 x 2,800 mm Serial number: PC-00156 CE marking: Yes EQUIPMENT Attachment: Sideshift Options: Work lights Djdew Tzlaspfx Ab Tjcr

Condition: not inspected (used), Hydraulic press brake Manufacturer: Colly, Model: 625, Year: 1995, Press force: 60 t, max. working pressure: 265 kg/cm³, max. bending length: 2,400 mm Dcjdpfx Aew U Rbajb Tor

Condition: new, length 1560 mm width 760 mm height over floor 880 - 920 mm weight 70 Kg Dodovblg Tepfx Ab Tecr Workbench with drawer block Dimensions of the entire drawer unit 66 x 40 x 35 cm. Dimensions of the individual drawers 59 x 35 x 4 cm.

Condition: used, Year of construction: 1989, max. wheel diameter 400 mm gear width 275 mm max. module 6 Overall size 300x330x245 cm weight of the machine ca. 5,5 t Specification: Max wheel diameter: 400 mm Min module: 1 Max module: 6 Table diameter: 370 mm Max wheel diameter: -With counterstay: 340 mm -Without counterstay: 400 mm Max axial offset: 275 mm Max tangential adjustment: 100 mm Tooth helical angle: 45 degrees Max cutter diameter: 145 mm Max hobbing length: 170 mm Hob turning speeds capacity: 63-180 U/min Dsdpfeu A I Elsx Ab Tocr Feeds infinitely variable axial: 0,2-10 mm/U Feeds infinitely variable tangential: 0,1-5 mm/U Radial for spur gears: 0,1-4 mm/U Radial for worm gears: 0,025-1 mm/U Rapid traverse axial: 500 mm/min Rapid traverse tangential: 250 mm/min Radial for spur gears: 400 mm/U Radial for worm gears: 100 mm/U Motor power: 7.4 kW

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 2,257 h, functionality: fully functional, machine/vehicle number: SN7682, travel distance X-axis: 730 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 585 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 21 kVA, controller manufacturer: Heidenhain, controller model: TNC640, total height: 3,000 mm, total length: 2,370 mm, total width: 2,845 mm, overall weight: 8,000 kg, spindle speed (max.): 42,000 rpm, operating hours of spindle: 2,256 h, number of spindles: 1, number of slots in tool magazine: 90, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, MP7-5 Axis Heidenhain TNC640 with integrated pallet changer, 40 pallet stations Travel range X/Y/Z: 730x250x400 mm B-axis travel range: +/- 105 degrees C-axis: infinite Working area X/Y/Z: 585x250x400 mm Maximum workpiece weight: 60 kg Distance machine table to spindle nose: 450 mm Machine dimensions (WxDxH): 2845x2370x3000 mm Machine weight: 8,000 kg Equipment: Cooling unit Rotary tilting table 160 (B/C axis) Workpiece measurement Renishaw OMP400 Dust extraction L-CUT 5-axis table chuck EROWA PowerChuck Pallet changer ITS50/150 pallets Tool changer with 90 positions MHT media distributor Djdpfx Aow U D Igjb Tocr Control unit Heidenhain TNC640 Milling spindle Steptec HVC140 Spindle speed: 42,000 rpm HSK40

Condition: used, Year of construction: 1987, bore capacity in steel (diameter) 50 mm throat 385 mm bore stroke 240 mm taper MK 5 MK table-size 660 mm feeds 0,1-0,14-0,2-0,28-0,4 . mm/U turning speeds 40 - 800 U/min total power requirement 4,0 KW weight of the machine ca. 1,4 t dimensions 1,2 x 0,8 x 2,59 m Pillar drill with: - Feed - Left/right rotation Dsdpfxow Tdx Ne Ab Tscr - Variable spindle speed - Coolant pump