Used 5 Axis Milling Center for sale (71,174)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 314C19003, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Quaser UX630P — 5-Axis CNC Machining Centre, 2020 Key specifications: Iedpfx Aoyt Ha Njhvsap - Simultaneous 5-axis, B-axis ±120°, C-axis 360° continuous - Spindle: HSTec HM-15A Built-in, HSK-A63, 15,000 rpm, 51 kW, 162 Nm - Rotary/tilt table: Peiseler (Germany), Direct Drive, Ø480 mm, 500 kg load, max. workpiece Ø630 × 540 mm - Control: Heidenhain TNC 640, incl. options DCM, Kinematics Opt, LAC, DNC (Opt. 18) - Tool magazine: 90 positions (HSK-A63) - Through-spindle coolant 20 bar, Heidenhain linear scales on all axes - Renishaw 3D workpiece probe + Blum laser tool measuring system - Schunk Vero-S zero-point clamping system - BMO robot interface installed and programmed - Year: 2020 | Original purchase price: €370,000 Approx. 150 HSK-A63 tool holders available for takeover — subject to separate negotiation. Full specifications and equipment list available in the attached PDF. Machine can be inspected in operation. Video and test run on request. Location: Ommen, Netherlands. Operating hours spindle: 4,726 hours!

Condition: like new (used), Year of construction: 2001, operating hours: 10,356 h, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, nominal power (apparent): 44 kVA, controller manufacturer: Heidenhain TNC 430, workpiece weight (max.): 5,000 kg, total height: 4,200 mm, total length: 7,900 mm, total width: 8,800 mm, spindle speed (min.): 10,000 rpm, Year of construction: 2001 CNC controller: Heidenhain TNC 430 Axes X-axis travel mm: 1800 Y-axis travel mm: 2000 Z-axis travel mm: 1100 C-axis degrees: 360º (0,001) B-axis degrees: -7/+187º Feed rates m/min: 60/40/40 Rapid traverse m/min: 60/40/40 Milling/turning table nc: Table dimensions mm: Ø1700x1400 Max. workpiece weight kg: 5000 Table rotation speed rpm: 200 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 (40/100%ED) Cooling Iodpfsyq Rpcex Ahvjap Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper Chip-to-chip time s: 13.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 Tool breakage probe Machine running times Under power: 10356 Spindle Working: 6223 Basic machine dimensions / weight Length mm: 7900 Width mm: 8800 Height mm: 4200

Condition: like new (used), Year of construction: 2006, operating hours: 51,775 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, nominal power (apparent): 44 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece weight (max.): 4,000 kg, total height: 3,500 mm, total length: 7,500 mm, total width: 7,700 mm, table length: 1,500 mm, overall weight: 35,000 kg, spindle speed (min.): 10,000 rpm, Year of construction: 2006 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1600 Y-axis travel mm: 1250 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Table dimensions mm: Ø1500x1250 Max. workpiece weight kg: 4000 Table rotation speed rpm: 10 Spindle Ijdpfjyq Rm Isx Ahvoap Spindle speed rpm: 10000 Spindle drive power kW: 44/32 (40/100%ED) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 250 With occupied neighboring places mm: 130 Max. Tool Length mm: 650 Max tool weight kg: 30 Chip-to-chip time s: 6 Equipment Chip conveyor Infrared probe Rotating inspection windows Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Machine running times Under power: 98398 Spindle Working: 51775 Rated power kVA: 96.2 Basic machine dimensions / weight Length mm: 7500 Width mm: 7700 Height mm: 3500 Weight kg: 35000

Condition: good (used), Year of construction: 2015, Table size 950 x 800mm , table load 1,000 kgs, Traverses X Y Z 1,000 x 900 x 700mm, B axis -5/+110 degrees, C axis 360 degrees Rapid feedrates 80m/min, 60 station toolchanger, spindle taper HSK 63, spindle speed 18,000rpm, Heidenhain TNC 530 control, swarf conveyor, Through Spindle Coolant Iaodpfx Ahoyqxduovjp

Condition: used, FANUC ROBODRILL ALPHA T14i B is a Vertical machining center engineered for high precision, strong accuracy and reliability. Table 550×380 mm; travels X500 Y400 Z330 mm; vertical distance 150–450 mm. Spindle 100–12,000 t/min (stepless), feed 1–15,000 mm/min, rapid 48 m/min; spindle motor 5.5 kW; 3×400 V; total power 9 kVA; weight ≈2100 kg; size 1600×2000×2200 mm. Tool magazine 14 stations; 4th-axis divider Peiseler; oil-mist extractor Elbaron. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Isdpfx Aeyn Rdbohvoap

Condition: excellent (used), SCHAUBLIN 51 5AX CNC is a 5-axis machining center designed for precision, high accuracy and reliability. Working capacities: X300 Y400 Z430 mm; rotary table Ø210 mm; table load V50 H75 kg; A +30/−120°, C360°. Specs: HSK‑A63, 0–20,000 rpm, spindle motor 23 kW, feed 12,000 mm/min, rapid 30 m/min; weight ≈5750 kg; size 2700×1800×2600 mm. Tool magazine 20 places, Ø 80 mm (95 mm free), length 250 mm, tool change 3 s. Accessories: coolant system, water cooler, oil mist extractor FX4000, rinsing gun. Achieves tight tolerances; sectors: watchmaking, aerospace, medical, automotive, machine tools. Iasdpjyn N Rgjfx Ahvjp

Condition: good (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,520 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 420 mm, spindle speed (max.): 12,000 rpm, CNC control Sinumerik 840D NC-swivel-rotary table (B-axis and C-axis) Iasdpfx Ahex S Htzevjp automatic tool changer for 30 tools coolant device chip conveyor Technische Daten / technical details: X-Weg / X-travel 1520 mm Y-Weg / Y-travel 520 mm Z-Weg / Z-travel 420 mm B-Achse Schwenktisch / B-axis swivel table -90 - +110 ° C-Achse Rundtisch / C-axis rotary table 360 ° NC-Schwenk-Rundtischdurchmesser / NC swivel-rotary table diameter 500 mm Starrtischaufspannfläche / fixed table clamping area 920 x 540 mm Spindelaufnahme / spindle taper SK40 Drehzahl Spindel / spindle speed 12000 Upm /rpm Eilgang / rapid feed 32 m/min Antriebsleistung Spindel / drive capacity spindle 25 kW Gewicht der Maschine ca. / weight 10500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, CNC control Heidenhain iTNC530 NC swivel-rotary table (B-axis and C-axis) Iedpevmqkusfx Ahveap pallet changing device with 7 places 300mm x 300mm 30-fold automatic tool changer electronical hand wheel coolant through spindle device (IKZ) chip conveyor coolant device Technische Daten / technical details: Verfahrweg X / X-Travel 600 mm Verfahrweg Y / Y-Travel 450 mm Verfahrweg Z / Z-Travel 450 mm B-Achse Schwenktisch / B-axis swivel table -115 / +30 ° C-Achse Rundtisch / C-axis rotary table 360 ° Tischgröße / table size 300 x 300 mm Werkzeugschaft / spindle taper HSK 63 Drehzahlbereich / spindle speed 20-20000 UpM /rpm Werkzeugwechsler / tool changer 30 fach /fold Gewicht der Maschine ca. / weight ca. 7700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 520 mm, CNC control Heidenhain iTNC530 NC rotary tilt table right Fixed table on the left 30-fold tool changer el. handwheel IKZ (20 bar) chip conveyor Technische Daten / technical details: Travel X/ X-travel 1200 mm Traverse path rotary swivel range in X / X-travel rotary swivel side 500 mm X-travel fixed machine table area in X / X-travel fixed table side 570 mm Travel distance Y / Y-travel 650 mm Z-travel 520 mm A-axis / A-axis +90 / -110 ° C-axis / C-axis 360 ° Spindle taper SK40 Drehzahlbereich / spindle speed 30-8000 rpm Feed rate / infeed 0-45000 mm/min Iaodpfx Ahetu S Irjvop Schwenk-Rundtischababmaßen / swivel rotary table dimensions 520 x 420 mm interfering edge diameter 610 mm / interfering edge diameter 610 mm Höhe des Stützlageres / height of the support bearing 90 mm Fester Tisch Abmaße / fixed table dimensions 700 x 600 mm Werkzeugwechselmagazinplätze / number of tool places in changer 30 Antriebbleistung / drive capacity 22 kW Gewicht ca. / weight 8500 kg Technical data, accessories and description of the machine are not binding - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 630 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, CNC control Mazatrol Matrix 2-fold pallet changing device NC-swivel rotary table 80-fold tool changer high pressure coolant through the spindle 20bar chip conveyor Technische Daten / technical details: Verfahrweg X / X-Travel 630 mm Verfahrweg Y / Y-Travel 765 mm Verfahrweg Z / Z-Travel 510 mm Schwenkbereich A-Achse / swivel range A-axis -120 - +30 ° Drehbereich C-Achse / rotary range C-axis 360 ° Tischgröße / table size 500x500 mm Werkzeugschaft / spindle taper SK40 Drehzahl / spindle speed 35-12000 UpM /rpm Eilgang / rapid feed 50 m/min Anzahl der Werkzeugplätze / tool places in ATC 80 fach / fold Antriebsleistung Hauptantrieb / drive capacity main drive 26 kW Gewicht der Maschine ca. / weight 17000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Iaedpotp Hgzjfx Ahvjp

Condition: excellent (used), Year of construction: 1998, operating hours: 54,400 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain, controller model: 426, spindle speed (max.): 30,000 rpm, 5-axis machining center Manufacturer: DMG Model: DMU-50V Year of manufacture: 1998 Control: Heidenhain TNC-426 Power-on hours: approx. 54,400 h Ijdpfsynb Iqex Ahvjap Spindle hours: approx. 12,900 h S/N: XXXXX Technical data: ----- - Travel X-Y-Z: 500 x 380 x 400 mm - NC rotary/swivel table 360° / 500 x 380 mm - Spindle: 30,000 rpm - Tool holder: HSK-50 - Tool magazine: 24 stations - Coolant system - Chip conveyor: no - Automatic tool measurement - Connected load: 26 kVA - Weight: approx. 4.0 t Accessories: ----- - Manuals - Electronic handwheel - 20x HSK-50 tool holders

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table Iaedpfxeym Nc Ts Ahvsp - Coolant system, chip conveyor - Complete housing The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10530 Manufacturer: DöRRIES - SCHARMANN Type: Alpha 1000 Year of construction: 2010 Type of control: CNC Control: Siemens SINUMERIK 840 D Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 2000 mm A-Axis: 0 - 90 x 0,001 ° B-Axis: 360 x 0,001 ° Number of T-slots: 1 + 8 Max. Workpiece Weight: 5000 kg T - groove width: 22 mm T - slot spacing: 100 mm T-Slots: DIN 650 mm Tool Taper: HSK - A 100 Tool Piece Magazine With: 207 + 10 Pcs./pcs. Iodpfxjym Ncte Ahvsap Max. Torque: 1250 Nm Feed Speeds X/Y/Z Axis: 1 - 30000 mm / min Rapid Travel X/Y/Z: 30,00 mm / min Drive Capacity - Spindle Motor: 45 kW Total Power Requirement: 100 kW Dimensions Of The Machine Ca.: 13 x 8 x 4,5 m Size Of Pallet: 2 x 1000 x 1000 mm Spindle speed gear stage 1: 1 - 1096 1 / min Spindle speed gear stage 2: 1096 - 6000 1 / min Further information: - Measuring probe - Chip conveyor - Coolant system - Coolant through the spindle - Pallets with 5-way media connection and clamping hydraulics - Extraction system - Swivel spindle A-axis 0 - 90 - NC rotary table B-axis

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg Iasdpfx Ahjym Nb Aovsp NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2002, 5-axis CNC machining center Manufacturer: AXA Machine Model: VPC 50 U Control: Siemens Year of manufacture: 2002 Number of controlled axes: 5 Gantry design TECHNICAL DATA Travel ranges - X-axis: (mm) 2,300 - Y-axis: (mm) 1,200 - Z-axis: (mm) 700 Spindle: Swiveling spindle - Swivel range (degrees): 90 (0.001) Iaedpjymw Tgefx Ahvep - Speed range (rpm): 30–7,500 Tool magazine - Tool holder: SK50 Machine table - Table size, fixed table L x W: (mm) 1,100 x 1,100 - Diameter of built-in rotary table: (mm) 1,100 x 1,100 Technical data and information subject to change and errors excepted.

Condition: excellent (used), Year of construction: 2005, operating hours: 34,131 h, functionality: fully functional, machine/vehicle number: 592, total length: 3,500 mm, total width: 4,000 mm, total height: 3,200 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, protection type (IP code): IP54, year of last overhaul: 2023, working width: 1,000 mm, working height: 750 mm, working length: 1,500 mm, Huber & Grimme P-T-F 15-10 – 5-Axis CNC Milling Machine with Full Enclosure: Working dimensions: 2x1500x1000x750 mm Machine & Equipment: -Huber & Grimme P-T-F 15-10 -Linear screw drive for all axis -Year of manufacture: 2005 -5 controlled axes 8 kW high-frequency spindle -Automatic tool changer -Siemens 840D -Servo drives on all axes Iodpfxsx Iffbe Ahveap -400 V / 50 Hz electrical system -Spindle type: HF 100 A 45 CKPV Included in the sale: -Full machine enclosure -Electrical control cabinet -Cooling unit and vacuum system (as shown) Applications: -Aluminium, plastics, composites, wood -Model and mould making Machine is sold as a complete unit, including enclosure and electrical system, as shown in photos. Inspection possible by appointment.

Condition: good (used), Complete specifications are shown in the photos of the listing. Ijdpfx Asymgd Iohvjap CNC HEIDENHAIN 426 Machine in good working condition, videos available upon request.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, spindle speed (min.): 18,000 rpm, feed length X-axis: 730 mm, feed length Y-axis: 450 mm, feed length Z-axis: 520 mm, workpiece weight (max.): 200 kg, total length: 3,000 mm, total width: 2,300 mm, tool length: 300 mm, We are offering this very good Mazak CV5-500 CNC 5-axis machining center, year of manufacture 2020. Manufacturer: Mazak Model: CV5-500 Year of manufacture: 2020 Condition: very good The price is still negotiable. If you have any further questions or require more information, please feel free to send us a message or call us. Isdpfeyq Hgdex Ahveap

Condition: like new (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,400 mm, table length: 2,800 mm, table width: 3,100 mm, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, workpiece weight (max.): 52,000 kg, spindle nose: HSK 63A, controller manufacturer: Heidenhain, controller model: 640, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-Axis Gantry Milling Machine PARPAS Model DIAMOND LINEAR 30 Numerical control Heidenhain 640 Cross travel (X): 2,600 mm Longitudinal travel (Y): 3,000 mm Vertical travel (Z): 1,400 mm Feed rates: 60,000 mm/min Continuous orthogonal head (TOE29T) C axis: +/- 370° A axis: +/- 110° Iodpfowzv Umjx Ahvsap Tool holder: HSK-63A Spindle speed: 20,000 rpm Spindle power: 37 kW Table: 3,100 x 2,800 mm Load capacity: 6 t/m² Tool magazine: 60 positions Equipped with: - 2 chip conveyors - HR550FS handwheel USED MACHINE YEAR 2021

Condition: new, Year of construction: 2021, machine/vehicle number: 218, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 5,500 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OSAI, total height: 8,100 mm, total length: 5,100 mm, total width: 3,400 mm, controller model: OPENkey, spindle motor power: 7,400 W, number of spindles: 4, rapid traverse Z-axis: 38 m/min, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 54 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 3,000 rpm, Equipment: CE marking, documentation/manual, We've lowered the price!!! NEW PRICE ONLY EUR 130,000!!! This price is valid only until March 21, 2026! Take advantage of this opportunity! We invite you to purchase a NEW and exceptional 5-AXIS MACHINING CENTER from the renowned manufacturer FANUM. We are offering the new SIGMA model, which is exceptionally well-equipped. The machine is completely new, and the attached specification details all functions, parameters, and production capabilities. FANUM has been recognized for years for its reliability, accuracy, high performance, and fast processing speed. The MACHINING CENTER offered is BRAND NEW. It was purchased from FANUM Sp. z o.o. in 2021 and delivered to our facility directly by the manufacturer. The FANUM Sp. z o.o. service team only performed initial commissioning and the machine has not been used since. Its condition is as NEW. Our model is extremely well-equipped and offers practically everything required. A comparable new unit currently costs approximately EUR 282,350 net (PLN 1,200,000 net). We maintain direct contact with, and support from, the manufacturer, FANUM Sp. z o.o. An additional commissioning and demonstration can be arranged at our facility. It is also possible to organize transportation to the new owner’s location and to have FANUM's engineers install and start up the machine at the installation site. The proposed price includes the machine itself, but we can also provide an offer with installation and commissioning at the new location. With a discount exceeding 40% (over EUR 117,640 net, approx. PLN 500,000 net) off the new purchase price, this is an extremely attractive opportunity for anyone looking to expand their production fleet with a similar machine or who did not anticipate acquiring a modern, new, and highly efficient MACHINING CENTER within their planned budget. General terms of sale: • Although the machine is NEW, it was manufactured in 2021 and we do not offer any guarantee or warranty; Iasdeyn Rpwjpfx Ahvep • Returns are not accepted; • The price shown does not include VAT (23% for buyers in Poland), which will be added to the invoice—please check the price in the listing; • Single ownership. * Price in EUR calculated based on NBP exchange rate: 1 EUR = 4.25 PLN. A warm welcome to all users of the MACHINESEEKER platform. We are new to MACHINESEEKER. We are not a furniture, manufacturing, or machinery dealer. We own numerous properties in Poland and are a developer of houses and apartments in Warsaw, the capital of Poland. The machines offered for sale are our property, acquired through settlements with tenants from the furniture industry. We are familiar with the machines’ history and condition, verified as per our descriptions. We are in direct contact with manufacturers who can provide additional support—Homag, Otto Martin, OMC Machinery, and FANUM. Since we do not require these machines, our prices are highly attractive, especially given their condition is virtually new. We can assist with transportation anywhere in Poland or the EU. Inspections before purchase are welcome. Best regards.

Condition: excellent (used), Year of construction: 2011, operating hours: 59,234 h, functionality: fully functional, Manufacturer: Deckel Maho Pfronten Type: DMC 210 FD Machine type / Typology: 5-axis portal machining center with milling/turning table (FD table) and pallet changer Alternative designation: 5-sided / 5-axis portal milling and turning machining center Year of manufacture: 2011 Condition: Very well maintained, in working condition Operating hours: According to hour meter Control: Siemens 840D Solutionline Isdpfjx Sylksx Ahveap Control type: Fully automatic Number of axes: 5 Tool taper: HSK 100 Travel X: 1,800 mm Travel Y: 2,100 mm Travel Z: 1,250 mm B-axis: 210° C-axis: 360° Table length: 1,850 mm Table width: 1,850 mm Max. workpiece length: 1,500 mm Max. workpiece weight: 5,000 kg Max. spindle speed: 6,300 rpm Max. feed rate: 60 m/min Distance table to spindle: 1,500 mm Tool magazine: 180 positions Total installed power: 163 kW Power supply: 400 V / 3N / PE / 50 Hz Connected load: 167 kVA Max. current: 241 A Max. fuse protection: 250 A DC control voltage: 24 V DC AC supply voltage: 230 V AC Machine weight: 50,000 kg Equipment: Platform, coolant unit, chip extractor, Renishaw MP10 probe, operating manual / documentation Inspection: Possible under power by appointment Description: This machine is a 5-axis portal machining center with milling/turning table (FD table) and pallet changer. The Deckel Maho DMC 210 FD is designed for 5-sided and 5-axis complete machining of large and heavy workpieces in a single setup, combining milling and turning operations in one machine. Thanks to its rigid portal design, the machine offers high precision, stiffness and dynamic performance. The FD table enables turning operations in addition to milling, reducing setup times and allowing efficient complete machining. The machine is in very well maintained condition, fully operational, and can be inspected under power by prior appointment.

Condition: good (used), Year of construction: 2009, operating hours: 22,100 h, functionality: fully functional, For sale is a Starrag Heckert HEC 1250 Athletic Pinole, a horizontal 5-axis machining center for the machining of large and heavy workpieces. Equipped with pinole support, NC rotary table and pallet changer, the machine stands out for its rigid design, high precision and very good accessibility within the working area. With Siemens 840D Solutionline, SK50 tool taper, 280-position tool magazine and Renishaw MP10 probe, the machine offers an extensive technical specification for demanding milling applications. The machine is in working condition. Technical data: Manufacturer: Starrag Heckert Type: HEC 1250 Athletic Pinole Machine type / Typology: Horizontal 5-axis machining center with pinole support, NC rotary table and pallet changer Alternative designation: Horizontal 5-axis machining center with quill and pallet system Year of manufacture: 2009 Serial number: 22132 Condition: In working condition Operating hours: 50,100 h Control: Siemens 840D Solutionline Number of axes: 5 Tool taper: DIN 69871 SK50 Travel X: 2,200 mm Travel Y: 1,500 mm Travel Z: 1,850 mm Pallet storage: 2 pallets Isdpfx Ahox Syhrovsap Pallets: 4 pallets with threaded holes / T-slots Pallet size: 1,000 x 1,250 mm Tool magazine: 280 positions Max. tool length: 450 mm Max. tool diameter: 250 mm Max. tool weight: 35 kg Probe: Renishaw MP10 NC rotary table: Available Machine weight: 40,000 kg Total connected load: 130 kW Compressed air connection: 6 bar Equipment: Oil tray, platform, coolant unit, chip extractor, operating manual / documentation Transport: Dismantling required Additional information: Crane available Delivery: April 2026

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Iedpfx Ahsvt D D Usvjap Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: like new (used), User surplus stock E ARIAXIS i-500 AT730 30 HSK tool magazine (n/a Euchner) NP326 5-axis machining package for SmoothX MO084 Manual pulse generator (wired/detachable) NO442 B) G00 slope constant NO600 B) Cylindrical interpolation SF060 Scale feedback system X, Y & Z axis Ijdpfxsynwxfs Ahvjap NO123 F) Tool radius compensation/5 axis SR534 Spindle speed 18,000rpm (HSK n/a Euchner) PL083 Signal tower (3 colour lights) NO091 B) Synchronised tapping MB269 RMP600 radio-type touch probe CV546 Preparation for chip conveyor (right) NO610 Work setting error compensation XXX Laser Mill Tool Measurement (NC4/ with airblast) O_2354hng Chip Conveyor, Local Manufacture (with transporter / ICON-P)

Condition: good (used), Year of construction: 2008, X/Y/Z 600/770/805mm, spindle 12,000 rpm / HSK 63, ATC 40, swivel table unit (A'-axis), rotary table with T-slots (B'-axis) through spindle cooling, all machines with coolant tank, Chip conveyor and belt filter system, CNC Heidenhain iTNC 530; Control: CNC Heidenhain iTNC 530 Isdpfxsh Hlmcs Ahvoap