3-axis vertical machining center

Mikron UM 600

Condition: used, Year of construction: 1998, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 94.98.030, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 100 rpm, total height: 2,000 mm, total width: 2,000 mm, total length: 2,800 mm, table width: 520 mm, table length: 900 mm, position of the milling head: mittig, type of input current: three-phase, rotational speed (max.): 6,000 rpm, rotational speed (min.): 100 rpm, table load: 400 kg, overall weight: 3,500 kg, input voltage: 400 V, workpiece weight (max.): 100 kg, input current: 40 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Good used CNC milling machine with low hours. Used exclusively for repairs and very small production runs. Extensive assortment of tool holders as shown in the photos, including vise, chucks, cutters, plates, and tap holders. Also equipped with a Benz high-speed spindle for wet operation up to 25,000 rpm. TECHNICAL DETAILS Drive power at 44% duty cycle: 15 kW Drive power at 100% duty cycle: 6 kW Max. torque: 50 Nm Machining spindles (vertical and horizontal) Max. spindle torque at 44% duty cycle: 800 Nm Number of gearbox stages: 4 Adjustable speed range (vertical and horizontal): 10 – 6,000 rpm Toolholder / pull stud: SK 40 / DIN 69871 Max. tool weight: 13 kg Tool diameter: 130 mm Automatic travel distances Spindle longitudinal feed (X-axis): 600 mm Spindle transverse feed (Y-axis): 500 mm Spindle vertical feed (Z-axis): 450 mm Feed drives (AC) Programmable feed rate X / Y-axis: 0 – 15,000 mm/min Programmable feed rate Z-axis: 0 – 12,000 mm/min Rapid traverse rate X / Y-axis: 15,000 mm/min Rapid traverse rate Z-axis: 12,000 mm/min Coolant tank capacity: 150 l Flow rate: approx. 20 l/min Clamping table Table size: 520 × 900 mm Number of T-slots: 4 T-slot width: 14 H7 Table load capacity: 400 kg Ijdpeywn Siofx Abuoar Tool changer TCD 44 Tool stations: 22 Tool diameter: 80 / 130 mm Max. tool length: 350 mm Max. tool weight: 6 kg Max. workpiece weight in drum magazine: 200 kg Chip-to-chip time: 20-25 s Tool change time: 12 - 16 s Electrical connection data Total installed nominal power: 15.8 kW Usable and connected load: 12.3 kW Operating voltage and frequency: 3 × 400 V / 50 Hz

Condition: good (used), Year of construction: 2003, In good technical condition and in working order. Iajdeu Tq Hwopfx Abujr Year of construction 2003. X-axis 350 mm. Y-axis 250 mm. Z-axis 256 mm. Workpiece length: 750 mm. Workpiece width: 550 mm. Workpiece height: 250 mm. Machine dimensions: L 1670 mm x W 2040 mm, H 2305 mm. Machine weight approx. 2600 kg.

Condition: ready for operation (used), Year of construction: 1997, controller manufacturer: HEIDENHAIN, controller model: TNC 410/426, tool weight: 12,000 g, This 3-axis MIKRON UM 600 vertical machining center was manufactured in 1997. If you are looking to get high-quality milling capabilities, consider the MIKRON UM 600 machine we have for sale. Contact us for more information. Additional equipment • Noise Emission: Sound power level of 75 dB (A) Machine Benefits Technical Machine Benefits • Ac main spindle drive • Drive power at 40% duty cycle: 9 kw // drive power at 100% duty cycle: 6 kw • Max. Torque at the spindle: 35 nm • Stepless speed control: yes • Tool spindles (fk 40) • Max. Torque at the spindle at 40% duty cycle: 800 nm • Speed range adjustable: 5 - 5000 min⁻¹ • Number of gear stages: 4 • Minimum draw-in force: 100000 n • Minimum ejection force: 3500 n Extra Information Movement Travels in Automatic Mode: Rapid traverse of the clamping fixture (X-axis): 600 mm Rapid traverse of the spindle slide (Z-axis): 500 mm Rapid traverse of the clamping fixture (Z-axis): 450 mm AC Feed Drives Programmable feed rate: mm/min (X, Y-axis), mm/min (Z-axis) Rapid traverse speed: 15 m/min (X, Y-axis), 12 m/min (Z-axis) Feed force at 100% duty cycle: 9000 N (X, Y-axis), 11000 N (Z-axis) Media Coolant System Ijdpfxsx D Id Ao Abusar Capacity: 150 liters Flow rate: approx. 30 l/min at 2.2 bar

Condition: good (used), Year of construction: 1996, Travel X/Y/Z 600/500/450 mm, Control HEIDENHAIN TNC 410 PA, spindle power 9,0 KW, spindle speed 5-6300 rpm, ISO40, table size 530x900 mm, max. table load 400 kg, tool changer 22 places, dimension 2200x2700x2050 mm, ca. 3550 kgs, accessoires Renishaw tool prove, 4th axis TRIAG with clampings, Software updated, flat screen, radio data transfer installed, tool holders, manuals Iaedeqagugepfx Abujr

Condition: used, Year of construction: 1994, Technical details: number of spindles: 8 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 S DNT Yob: 1994 Eight-spindle automatic lathe with 8 main spindles max. nominal diameter D=32mm control: Siemens SIMATIC S7 electronic cam control Balluff gripper in position 8 for backworking Iasdpfx Ael Su Rxjbujr CNC cross slide position 6 CNC cross slide position 7 Workpiece belt Coolant cooling Schimpke Chip conveyor with magnetic separator Tapping couplings The tooling shown may differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1997, x-travel 600 mm y-travel 500 mm z-travel 450 mm Control Heidenhain TNC 426 PB tool change unit 22-fach tool taper SK40 turning speeds 5-6.300 U/min table-size 900 x 530 mm Iajdpoykb Hlofx Abuer table load 400 kg total power requirement 9 kW weight of the machine ca. 3550 kg dimensions of the machine ca. 2,2 x 2,7 x 2,05 m 3-axis vertical machining centre MIKRON UM 600, built in 1997 In excellent technical condition, all guides have been freshly scraped. The spindle has been re-mounted and has since been used for only 262 hours. New power unit for spindle drive installed. Accessories: Heidenhain TS 642 touch probe system 2 new vices SK40 tool holder

Condition: ready for operation (used), Year of construction: 2014, operating hours: 27,608 h, controller manufacturer: SIEMENS, This 5-axis DMG MORI CTX beta 800 TC was manufactured in 2014. It features a main spindle speed of 5,000 RPM and a sub spindle speed of 6,000 RPM, along with a 30-piece tool magazine. Ideal for complex turn-mill operations, consider the opportunity to buy this DMG MORI CTX beta 800 TC turn-mill centre. Contact us for further details regarding this machine. Iasdox U D Hqjpfx Abujr • Tools: 30 pcs • Incl tools shown on the pictures • Excl barfeeder

Condition: used, Year of construction: 1985, x-travel 500 mm y-travel 500 mm z-travel 350 mm table surface area 800 x 450 mm Iajdjtv Ia Tjpfx Abuor spindle taper: ISO 40 quill stroke mm feed - longitudinal/cross mm/min feeds vertical mm/min turning speed range max. 3150 U/min voltage 380 V / 50 Hz power capacity 4 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, • new set of bevel gears,

Condition: used, Year of construction: 1983, Technical details: Iaedju Nfvuepfx Abuer Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,934 h, travel distance X-axis: 406 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 254 mm, controller manufacturer: HAAS, spindle speed (max.): 40,000 rpm, number of axes: 3, This 3s HAAS Super Mini Mill HE was manufactured in 2005, featuring a robust Haas CNC Control and an IBAG Switzerland spindle with a maximum speed of 40,000 rpm. The machine includes an Automatic Tool Changer with a capacity for 18 tools, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill HE vertical machining centre we have for sale. Contact us for further details. • Spindle: • IBAG Switzerland spindle • Water-cooled • Tool holder: HSK E32 • Tool changer: • Type: Automatic Tool Changer (ATC) • Capacity: 18 tools • Working hours (from control): • Servo time: 9,158 h Iaodpfjyhfltex Abujr • Motion time: 4,984 h • Spindle time: 5,934 h • Idle time: 0:44 h • Electrical data: • Voltage: 360–480 V • Phase: 3 • Frequency: 50/60 Hz • Full load current: 20 A • Largest load: 35 A • Short-circuit interrupting capacity: 10,000 A Technical Specification Taper Size HSK 32