Single Column Press - Hydraulic

WMW Zeulenroda PYE 160 S1M

Condition: new, Year of construction: 2026, machine/vehicle number: 06-26-005, functionality: fully functional, power: 17 kW (23.11 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 360 mm, ram plate width: 750 mm, ram plate length: 450 mm, distance table to ram: 800 mm, total length: 2,200 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 7,000 kg, year of last overhaul: 2026, controller manufacturer: SIEMENS, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic single-column press PYE 160 S1/M >completely overhauled / CE marking with  24 months warranty< from the manufacturer ZEULENRODA PRESSTECHNIK Hydraulic press for forming and assembly operations, pressing force 160 t Complete overhaul with CE conformity Ram stroke: 500 mm Clamping plate, press table: 900 x 580 mm with customer-specific clamping arrangement One-piece C-frame press in steel welded construction Newly manufactured table and ram plate according to customer requirements! Ram plate, twist-proof 3-sided protective guard, on the operator side via light curtain, on the side via sliding guard elements SIEMENS control system -new- Conversion to electronic stroke measuring system Remote maintenance ----- Further services, plant retrofit Control / Operation: • Rapid traverse function • USB interface for data exchange • Touchscreen / visualization SIEMENS • Two-hand control unit with two-channel monitoring of the two-hand synchronous circuit on the press table, (incl. 5m cable) • Limit switches for stroke adjustment are replaced by initiators • Monitoring of the initial stroke after completion • Replacement of the existing 60-V DC solenoids on the pilot control valves with 24-V DC solenoids, including the necessary intermediate plates Hnodpfx Aijzf Ht Setou • The press has an electronic stroke measuring system (including teach-in function and display of the current ram position). This eliminates the mechanical cam switching mechanism. Hydraulic system • Hydraulic safety block for monitoring the closing movement on the main cylinder • Position-monitored directional control valve for the up and down movement of the ram • Replacement of the motors of the main and control pump • Replacement of the seals on the main cylinder • Fine filter with contamination indicator • All installation and piping work New documentation including CE declaration of conformity Delivery time / Implementation time: approx. 5 months

Condition: new, machine/vehicle number: 190040019, Inclined conveyor belt (4,000 x 390 mm) Inclined conveyor belt with direct drive and PU-PVC belt Hnjdetvfb Njpfx Aiteu

Condition: excellent (used), Year of construction: 1984, power: 17 kW (23.11 HP), type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 700 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 22,000 mm, total width: 12,500 mm, total height: 34,500 mm, overall weight: 7,000 kg, operating pressure: 160 bar, installation height: 800 mm, pressure: 250 bar, Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Hodpsqy E I Rjfx Aitjnu

Year of construction: 2018, condition: as good as new (ex-display), Welding rotary table KT 50 Load capacity, horizontal: 50 kg, tilted: 25 kg Power supply: 220 V, 50 Hz Hodped A Etysfx Aitonu Table diameter: 320 mm Table height: 400 mm, tilted to center: 300 mm Length: 650 mm, width: 650 mm Tilting range, continuously adjustable via crank drive motor: 0 – 90° Speed: 1.7 – 15 rpm Includes foot-operated remote control

Condition: reconditioned (used), CNC vertical machining center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of construction: 2010 Travels: X 635 Y 510 Z 460 Hedjuqmvkspfx Aitonu Speed range: 20 - 8,000 rpm infinitely variable With the following accessories: Rigid angled table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Heidenhain TT 140 tool length measuring system Fully protected cabin with sliding doors and interior lighting Coolant device Signal light 4 colors Chip conveyor Chip flushing gun 3 pcs. Height-adjustable machine shoes Operating instructions

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 200 V, pressing force: 160 t, table length: 600 mm, overall weight: 19,000 kg, punching force: 160 t, height adjustment type: electric, installation height: 1,900 mm, ram adjustment: 100 mm, stroke adjustment: 130 mm, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Hsdpfou D Dhxox Aitenu Bear size: 1360x585mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener.

Condition: good (used), Tool holder VDI 30 Hnodsww Hluspfx Aitou

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, press force: max. 1.250 to. daylight: max. 480 mm width: 585 mm Hedpfswuutbox Aitonu stroke: max. 355 mm weight: 9.000 Kg. Note: the press is been partly reconditioned by SACK & KIESSELBACH and the control system is been repalced.

Condition: used, Year of construction: 1981, x-travel 800 mm y-travel 500 mm z-travel 460 mm table surface area 1000 x 500 mm Hedotqqplspfx Aitsnu spindle taper SK 40 control HEIDENHAIN TNC 150 spindle turning speed range 31,5 - 3150 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid traverse longitudinal and cross 6 m/min rapid traverse vertical 4 m/min quill stroke 110 mm distance spindle nose and table max. 559 mm table load capacity max. 500 kg total power requirement 14 kW weight of the machine ca. 3,1 t dimensions of machine L x W x H 2,15 x 1,8 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant

Condition: good (used), Year of construction: 1980, Donewell press brake Type: 80-2500 Hnedpfxsqgcqio Aitsu Control: Cybelec CP 9220 Pressing force: 80 T Working width: 2540 mm Year of construction: 1980 Dimensions: 255x130x265 cm LxWxH Weight: approx 6300 KG