Milling machine

MAHO 700

Condition: ready for operation (used), Maho milling table for Maho milling machine MH 700 S, milling table for interchangeable pallets 500x630 mm, used, normal signs of wear, 100% functional, scope of delivery as shown in photos. ATTENTION: Please enquire separately for costs of packing and shipping! Djdpfox Dw Iwox Ab Tecr

Year of construction: 1997, condition: used, x-travel 600 mm y-travel 400 mm z-travel 420 mm Control Heidenhain TNC 407 quill stroke 75 mm table surface area 900x458 mm Tool bore SK 40 DIN 2080 oder DIN 6 turning speed range - stepless 20-4500 U/min Dcodpfslp U Aksx Ab Ter transmission ratio 3 feed stepless 1-5000 mm/min rapid motion -longitudinal/cross/vertical 7-7-6 m/min total power requirement 13 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 4x3,8x2,0 m

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) Dcjdpfx Ajxy Styjb Tsr - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: used, Year of construction: 1988, Control Grundig x-travel 700 mm Dedpfx Aboiqu S Eo Tecr y-travel 500 mm z-travel 400 mm weight of the machine ca. 2,8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Maho 700 and 900C milling machines Djdpfjxuduxsx Ab Tjcr

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Djdpfxsu Idbyj Ab Tecr Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *

Year of construction: 1982, condition: good (used), machine/vehicle number: 75 810, table mounting size: 630 Ø mm movement x: 600 mm movement y: 450 mm movement z: 500 mm tailstock stroke: von Hand 80 mm spindle taper: ISO 40 Dedpfxoby Hhtj Ab Tscr spindle turning speed range: 20 - 3150 rpm carriages continuously adjustable: 1 - 3000 mm/min rapid move: 4 m/min electrical connection: 380 V kW space needed: 2000 + 850 x 2000 x 2000 mm weight: 3300 kg

Condition: ready for operation (used), Maho milling head (Maho milling machine MH 700 S), used, normal signs of wear, 100% fully functional, scope of delivery as per photos. NOTE: Please enquire separately for costs of packing and shipping! Dsdpfx Abox Dw Iqj Tocr

Condition: used, NC universal tool milling machine MAHO type MH 700 P with HEIDENHAIN TNC 121 linear control . 71247 Circuit diagram no. ET 226 Built in 1979 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size 900 x 500 mm Spindle mount ISO 40 Spindle speed 40-2000 rpm, 18 steps Djdswd Szbjpfx Ab Tscr Feed rate X, Z-axis 1 - 600 mm/min, continuously variable Feed rate Y 1 - 300 mm/min, continuously variable Rapid traverse X, Z-axis 1.5 m/min Rapid traverse Y-axis 0.75 m/min Vertical spindle travel 80 mm Horizontal spindle travel 80 mm Spindle drive 4 kW Power supply 380 V, 50 Hz, 10 kW - HEIDENHAIN TNC 121 NC linear control - Vertical milling head with automatic Quill feed - Hydro-mechanical tool clamping - Coolant system in the machine base - Universal built-in rotary table, swiveling and tilting via threaded spindles +/- 30° - Universal built-in rotary table with manual transverse adjustment of 200 mm - Universal built-in rotary table with 360° rotation function and hydraulic clamping - Rotary table with direct indexing 72 x 5° and indirect indexing via hole plate 1:120 = 1 rev = 3° - Pivoting control panel - Central lubrication system - Electrical diagram Space requirement L x W x H 2000 x 1650 x 2250 mm Weight approx. 2800 kg Good condition

Year of construction: 1983, condition: ready for operation (used), Travel X/Y/Z: 700mm/500mm/450mm, table dimensions X/Y: 900mm/500mm, spindle mount: ISO40, speed: 3150rpm, feed: 3m/min, rapid traverse: 6m/min, spindle stroke: 100mm, machine dimensions X/Y/Z: approx. 3800mm/3600mm/2200mm, weight: approx. 3500kg, control: Philips CNC 432, on-site inspection is possible. Dcsdswpu Ibjpfx Ab Tor

Condition: ready for operation (used), Year of construction: 1989, Travel X/Y/Z: 700mm/500mm/600mm, speed: 6300rpm, power: approx. 10kW, feed X/Y/Z: 4m/min, rapid traverse X/Y/Z: 10m/8m/10m/min, machine dimensions X/Y/Z: approx. 4500mm/2300mm/2500mm, weight: approx. 6000kg, operating hours: 65425h. On-site inspection is possible. Djdpfx Abjwmqxko Tscr