Used Shelving Cantilever For Wood for sale (11,173)

Condition: new, XPLAN is the result of nearly 50 years of Incoplan’s experience in providing a highly efficient and energy-saving method for drying wood, worldwide, in all climate conditions. Compared to conventional air exchange systems, condensation drying with XPLAN requires approximately 60% less electrical energy. This is a gentle drying method, particularly suitable for hardwoods and softwoods, allowing their characteristics to be preserved. XPLAN is available in 3 versions: LITE, up to 10 m³ STANDARD, with additional fans for tunnel structures PRO, up to 20 m³ of wood. Build or purchase your own structure, install and connect XPLAN, and start your drying process. We provide a complete design for the ideal chamber to be built, material suggestions, and all the information you need. The images show the three versions, with suggestions for the homemade chamber structure and walls. The electrical cabinet is always included and connected to the machine. The software is automatic, touchscreen-operated, and contains several preloaded drying programs. TECHNICAL DATA SPECIFICATION COMPRESSOR NOMINAL HP 1.5 kW SHIPPING WEIGHT 154 kg AUXILIARY HEAT 4 kW Dcodpew Ug Atofx Aiiop INTERNAL BLOWER MOTORS 0.25 kW motor; airflow 3,060 m³/h HEAT TREATING CAPABILITIES Yes, up to 71° C (only with Heat booster) CIRCULATING FANS 2 included: 400 mm fans, 0.25 kW, 3,060 m³/h each POWER REQUIREMENTS 5.8 kW (28A) - 400 V 50 Hz (1-phase) DIMENSIONS (H X L X W) 94 × 83 × 52 cm (base unit only) 1 power vent system included (includes exhaust and intake) DRYING TIME 25mm Green Pine - 80% to 8% in approximately 12 days. 25mm Green Oak - 65% to 8% in approximately 35 days. LOAD CAPACITY For softwoods and fast-drying hardwoods (Pine or Poplar) 3-5 m³ For slow-drying hardwoods (Oak) 10 m³ NOMINAL WATER REMOVAL RATE 114 kg per 24 hours - 5 l/h

Condition: like new (used), functionality: fully functional, overall weight: 2,400 kg, empty load weight: 2,400 kg, operation weight: 2,400 kg, maximum load weight: 12,000 kg, lifting height: 4,300 mm, Year of construction: 2024, The grapple is brand new and unused. Suitable for Volvo L180 H (150, 220). Dcodpfx Aio Aayy Eoijp

Condition: like new (used), Year of construction: 2005, functionality: fully functional, power: 18.5 kW (25.15 HP), fuel type: electric, LBH RHZM 750 wood shedder. Dcjdpfxj Ah Dqus Aiisp The machine is in excellent condition! As shown in the photos. Can be tested on-site. We will assist with loading; transport is the buyer's responsibility.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 8,060 h, functionality: fully functional, overall weight: 1,750 kg, total width: 2,300 mm, total height: 2,400 mm, total length: 7,500 mm, input voltage: 400 V, year of last overhaul: 2026, transport width: 2,350 mm, Equipment: documentation/manual, Year of manufacture: 2017 – Engine: 15 kW Cutting dimensions: Dsdpfs Aavnfex Aiiocp – Maximum log diameter: 95 cm – Clear distance between rollers: 73 cm – Maximum cutting width (plank): 64 cm – Maximum cutting height above the blade: 39 cm – Maximum cutting length: 6.2 m The sawmill is equipped with a complete hydraulic system: – Hydraulic leveling system – Side stops – Material press – Toothed rotator – 2 loading arms Cutting head equipment: – Automatic device for setting the cutting thickness – Electric adjustment of the head height: up/down – Electric forward/backward feed of the head, with continuously adjustable speed – Electric blade guide arm – Hydraulic blade tensioning system with air cushion – Bark remover

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. Dodpjq Igyvjfx Aiijcp F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: excellent (used), total width: 4,000 mm, total height: 7,000 mm, clearance between the columns: 2,000 mm, shelf length: 900 mm, Equipment: double-sided, Consists of 3 double-sided uprights, height 6000 mm 9 shelves with arms 750 mm long Load capacity per cantilever arm: 900 kg Load capacity per level: 2700 kg Dcsdjulufpopfx Aiiop Load capacity per upright front: 8100 kg Distance between uprights: 2000 mm

Condition: new, Cantilever racking to your desired dimensions! Ideal for storing your long goods. Easy access to your products thanks to configurations that can be used on one or both sides. Expandable system that allows you to add elements as your requirements evolve. Perfect for offcuts or long goods in metal and wood businesses. Why BLT cantilever racking? - Certified German manufacturer DIN EN 1090 - Made in Germany- - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load! - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - We use the legally prescribed C4 load plates in accordance with DIN EN 15635 / BGR 234 - Long after-sales guarantee - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the upright profile. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Dsdo Ah R Acjpfx Aiiocp Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: good (used), Shelves, shelf supports -Shelves: made of wood with metal edging (outside) - 1. Size: 100x50x 3 cm, Quantity: 180 pieces, Weight: 5.6 kg/piece. Dedpfxjr U Sgws Aiijcp - 2. Size: 100x60x 3 cm, Quantity: 212 pieces, Weight: 6.3 kg/piece. - Exact dimensions: 99.7 x 49/59 cm - Price: 5/6 euros per piece

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 3GBG252051-ADK,002,009, The machine is a wood gasifier that converts the gas from wood chips into electricity that is generated from a 6-cylinder GM engine. The machine was acquired as part of the property that includes a boutique hotel. It was subsequently shut down when we did not have the capacity to operate it and the hotel. We expected to once again redeploy it but the base business keeps us too busy to add the operation and maintenance required of the machine. Dsdpo Adl Hrefx Aiiocp

Condition: excellent (used), Year of construction: 2024, Wood-Mizer CNC5003 CNC Machining Center – practically unused Key data • Category: CNC machining centers / CNC routers for wood (nesting) • Year of manufacture: [2024] • Condition: practically unused, demo / showroom unit • Location: [KOŁO], Poland • Availability: 2 units in identical specification — discount available if both are taken • Sold directly by the manufacturer, no intermediaries Description An industrial-grade CNC machining center at a mid-range machine price. Why this machine is worth considering • Only premium, branded components — no generic parts: FANUC, HSD, HIWIN, ATLANTA, FESTO, BECKER. Each of these components is serviceable and supported worldwide, independently of us as the machine builder. • FANUC control — the world's most widely used CNC platform, standard ISO G/M code, ready to interface with any CAM system. Support, training, and service are available from any authorized FANUC partner or CNC integrator. • Gantry design with dual drive — high stability and accuracy, high-resolution digital servos, low vibration. • 3095 × 1535 mm working area accommodates a full 3050 × 1530 mm panel — an entire sheet is machined in one setup, with no pre-cutting and no repositioning. • 6-zone vacuum nesting table with 216 vacuum points — exceptional flexibility in work-holding: panels, irregular parts, and porous materials. • The machine is on-site and available for inspection and a test cut before purchase, along with the available technical documentation. Technical data Specification Value Actual working area X / Y 3095 × 1535 mm (max. raster table area) Z-axis travel 200 mm Rapid traverse X / Y / Z 60 / 30 / 15 m/min Spindle HSD 11 kW, HSK63F, 24,000 rpm, inverter-driven, ceramic bearings Tool changer ATC — 12-position carousel on the gantry, service access hatch Drives and guideways ball screw, linear guides, and carriages by HIWIN; rack and pinion by ATLANTA Control FANUC, ISO G/M code, PC and CAM interface, built-in server Table grey extruded polypropylene raster table; 6 zones × 36 points = 216 individual vacuum points, each zone with its own valve Vacuum pump BECKER, 126 m³/h, 4 / 5.5 kW, max. vacuum 0.9 bar Pneumatics FESTO Chip extraction articulated extraction hood Control panel movable, on wheels — access from 3 sides of the table; local operation or via network Frame size (footprint) 1570 × 4150 mm Total length / width / height 4460 / 3000 / 2400 mm Dedpfeyr Dawsx Aiijcp Materials: wood, sheet materials, plastics, foam, composites, light alloys (aluminum). Terms of sale — stated openly • Sold as-is, without a manufacturer's warranty and without service support from our side — our CNC project has been discontinued. This is the only reason for this price. • Service and wear parts are available directly from the component manufacturers (FANUC, HSD, HIWIN, BECKER, FESTO) and from independent CNC integrators. • Inspection and a test run on-site are welcome — bring your own material and file. • Net price, EXW [KOŁO]. Loading is our responsibility; transport and unloading are the buyer's responsibility. Intra-community supply (0% VAT) for EU buyers with a valid VAT ID. • We can connect you with companies offering commissioning and operator training (third-party service, priced separately).

Condition: used, Year of construction: 2024, operating hours: 350 h, functionality: fully functional, machine/vehicle number: LT40MG38SDHP5-2.6WSWR, cutting length (max.): 6,100 mm, total length: 8,200 mm, overall weight: 2,600 kg, height adjustment type: electric, cutting width (max.): 820 mm, Equipment: chassis, We are offering this used Wood-Mizer LT40 wide complete sawmill (mobile), manufactured in 2024. Cutting length: 6.1 m Cutting width (plank): 82 cm Maximum processable log diameter: 100 cm Year of manufacture: 02/2024, approximately 350 hours of operation. Powered by a 38 hp gasoline engine. SW10 cutting thickness calculator. Electric saw head (forward, backward, up, down). Electric clutch for the engine. Dcjdpfezagkzex Aiiep Hydraulic package 5 (almost fully equipped). Log lifter, 2 pull-down clamps, 2 balancing rollers (one powered), 3 vertical stops, 1 manual vertical stop for short logs, log turner, central log clamp. Laser. Road approval. Unfortunately, the rear bumper is slightly bent, but it is fully functional. In addition, I have the following items available: Approximately 60 saw blades. Protective cover. Almost new CookiMizer. Log holder for short and thin logs from Hesener. And other accessories, such as spare blade guide wheels, etc.

Condition: as good as new (ex-display), Year of construction: 2023, Wood-Mizer MP280 – Four-sided planer / moulder • Year of manufacture: 2023 • Condition: Showroom machine, exhibited at trade fairs and exhibitions Dcsdpfs Af E Urjx Aiijp • Four-sided planing: maximum width 250 mm; standard working height 10–50 mm, up to 100 mm optional • Two-sided planing: width 300 mm; working height 10–230 mm • Single-sided planing: maximum width 410 mm; maximum height 230 mm • Cutter motors: top 4 kW; bottom 3 kW; side motors 2 × 3 kW • Feed speed: 3–15 m/min; feed motor 0.37 kW • Cutter speed: 6,000 rpm at 50 Hz • Side spindle diameter: 30 mm; maximum cutter head diameter: 140 mm • Dust extraction outlets: 1 × Ø125 mm and 3 × Ø100 mm • Central control panel with individual motor operation Machine location: Romania.

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Djdeq Nf U Espfx Aiiocp Technical Details Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: Dsdpfx Aisq Nfuzoiscp - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: as good as new (ex-display), Year of construction: 2024, warranty duration: 12 months,  Control panel  5 cutting heads  The angle of the 5th head can be adjusted within a range of 270 degrees  5 feed and pressure rollers  Adjustable feed speed: 3 – 15 m/min  4 dust extraction points  Height indicator allowing for precise adjustment of the table and machine height  Width indicator allowing for precise adjustment of the timber dimensions  Infeed table with a length of 1.9 m and outfeed table with a length of 1 m Technical data CAPACITY  Four-sided planing • Maximum width 350 mm • Height range 10 - 160 mm  Two-sided planing • Planing width 410 mm • Height range 10 - 230 mm  Single-sided planing • Maximum width 510 mm • Height 230 mm TOP HEAD • Diameter 88 mm • Width 510 mm • Motor power 5.5 kW (7.5 HP) • Rotational speed 6000 rpm • Max. planing depth 8 mm • Max. profiling depth 20 mm BOTTOM HEAD • Diameter 72 mm • Width 410 mm • Motor power 4 kW (5.5 HP) • Rotational speed 6000 rpm • Max. planing depth 8 mm • Max. profiling depth 10 mm (15 mm drill) SIDE HEADS • Spindle diameter 30 mm • Max. Knife height 160 mm • Max. Diameter 160 mm • Motor power 3 kW (4 HP) • Rotational speed 6000 rpm • Max. planing depth 30 mm ADDITIONAL HEAD • Spindle diameter 30 mm • Max. Knife height 130 mm • Max. Diameter 200 mm Dcedpfx Aszqzy Roiijp • Motor power 3 kW (4 HP) • Rotational speed 3000, 6000, 9000 rpm • Tilt angle 270 degrees

Condition: good (used), Brand: Cincinnati Milacron Austria GmbH Type of machine: Vacuum tank Model: V-225/1/6 Machine number: 2026708.50 Year of manufacture: 1999 Pipe outside diameter max.: 2 x 32 Ø Cooling length: 6 mm Spray pump: 5 kW Dimensions (LxWxH): 6600 x 1100 x 1750 mm Weight: 1,200 kg Brand: Cincinnati Milacron Austria GmbH Type of machine: RAE 32/2 E Machine number: 2026708.70 Year of manufacture: 1999 Pipe outside diameter max.: 32 Ø Dimensions (LxWxH): 1450 x 1150 x 2500 mm Weight: 900 kg Brand: Cincinnati Milacron Austria GmbH Type of machine: RSE 32/2 NG Machine number: 2026708.80 Year of manufacture: 1999 Pipe outside diameter max.: 32 Ø Dimensions (LxWxH): 2350 x 1100 x 2000 mm Weight: 900 kg Brand: SICA S.p.A Dsdpfe Ahy Tpjx Aiijcp Type: A 10 63 Serial No.: 9912801 Year of manufacture: 1999 Voltage: 380 V Power: 4 kW Pipe Ø max.: 63 mm Dimensions (LxWxH): 5500 x 950 x 2000 mm Weight: 1600 kg

Condition: as good as new (ex-display), Year of construction: 2019, Wood-Mizer MS300 – Sliding table circular saw • Condition: Demo machine, exhibited at trade shows and exhibitions • Cutting height: 103 mm • Distance between saw blade and fence: 800 mm • Sliding table: 1,400 × 350 mm • Sliding travel: 1,235 mm • Work table length: 900 mm; overall width: 750 mm • Saw blade diameter: 315 mm • Arbor diameter: 30 mm Dsdpfxs Af Hdhj Aiiocp • Spindle speed: 4,400 rpm • Blade tilt: 0–45° • Motor options listed in the model specifications: 3 kW three-phase or 2.2 kW single-phase

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, 3-log handling table, 6 cross conveyors, log loading system, and more. The sawmill line is fully functional. Customer service has been recently updated. The line is still in operation and can be inspected at any time. The price includes approximately 100 saw blades (value approx. €3000) for LT70/HR700 and 11 saw blades for EG800 (value approx. €1400). Dcedsyz Ia Ispfx Aiijp Currently, the HR700 is not in use and is stored. The HR700 is fully functional and has only 30 operating hours. An alternative configuration of the line with the HR700 can be seen in the last picture. If interested, the sawmill line can also be sold with ongoing operations (approx. 500-1000 m3 of sawn timber/year). If you have any questions, please do not hesitate to contact me.

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 1,120 kg, approx. 3.15 running meters Cantilever rack with shelves 60 cm deep H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - 12 x META shelf, approx. 100 x 60 cm - incl. all necessary connecting elements and screws. -- Available immediately Price : 1765,00 € net 2100,35 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Dedpfx Ais Ahnx Sjiocp Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2025, • 3kW electric motor • infeed and outfeed table • milling head with adjustable tilt angle up to 270° and vertical travel of 500mm and horizontal travel of 350mm • safety clamp for the sliding table • spindle diameter, standard: 30mm • max. tool diameter: 200mm • max. tool height: 130mm Dodpfx Ajzqzuheiijcp • guide length: 152mm • sliding table length: 1100mm • sliding table width: 350mm • overall table width: 750mm

Year of construction: 2024, condition: used, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Dcedpfx Aozf N Ncoiiop Sword brush Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Width: 2,280 mm Installation length: 500mm

Condition: excellent (used), carrying capacity per cantilever arm: 900 kg, clearance between the columns: 2,000 mm, Consisting of 3 double-sided uprights Dodpjz R N U Ajfx Aiiecp height 6000 mm 8 shelves with 750 mm arms Shelf load capacity: 900 kg Level load capacity: 2700 kg Load capacity per upright side: 8100 kg Upright spacing: 2000 mm

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 750 kg, maximum load weight: 700 kg, Equipment: lighting, Suchen Sie nach einem gemütlichen Wochenendhaus, einem Büro im Garten oder einem zusätzlichen Raum für Ihre Familie? Unser einzigartiges Modell bietet die perfekte Lösung. Mit einem vierseitigen Dach und einer gehängten Metallfassade, die eine Lebensdauer von 30+ Jahren hat, bietet unser mobiles Haus höchste Qualität. Die hochwertige Aluminiumfenster sorgen für eine hervorragende Ästhetik und Funktionalität. Im Inneren erwartet Sie ein selbstnivellierender Holzboden, der mit Harz beschichtet ist, sowie ein Badezimmer mit Harz behandelten Holzplatten. Die Wände und Decken bestehen aus robusten Sperrholzplatten. Unser mobiles Haus verfügt über hochwertige Innentüren und modulares Beleuchtungssystem. Die Küche ist mit eingebauten Schränken und Geräten ausgestattet, während das Schlafzimmer über eingebaute Kleiderschränke verfügt. Das mobile Haus bietet hochwertige Schlüssel und Steckdosen sowie eine ausgezeichnete Boden- und Dachdämmung. Die Bodenisolierung ist aus Mineralwolle und beträgt 15 cm, die Dachisolierung 18 cm und die Außenwandisolierung 15 cm. Das Haus ist bereits für die Installation von Außenkameras, Klimaanlagen und Lüftungsanlagen vorbereitet. Es gibt Anschlüsse für eine Waschmaschine und Platz für einen Kühlschrank, eine eingebaute Fritteuse, einen Herd und einen Dunstabzug. Zahlreiche Steckdosen sind in der Küche, im Wohnzimmer, im Schlafzimmer und im Badezimmer vorhanden. Unser mobiles Haus bietet auch die Möglichkeit zur Installation von Photovoltaiksystemen auf dem Dach, um nachhaltige Energie zu nutzen. Lieferbar in 7-14 Tage! Verpassen Sie nicht die Gelegenheit, Ihr Traumhaus zu finden! Kontaktieren Sie uns, um weitere Informationen zu erhalten und Ihre Bestellung aufzugeben. Dcedpfspxnpasx Aiisp

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. Dsdpfs Ahnw Hex Aiiscp - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2265.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand 2-blade cutter/trimmer, the “Canon 2-Knife Trimmer-A1” Item for sale: 1 x Canon 2-Knife Trimmer-A1 Condition: This listing is for a second-hand unit, which may show signs of wear Dedpfx Aezxw H Neiijcp (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.