Straightening Machine - Cold Plate

LORENZ BRM50/1720.21-WD-SW-ZW

Condition: new, Year of construction: 2026, -Tfon Leveltech® S-3513 Leveling Machine. -The Tfon Leveltech® S-3513 is a precision leveling machine optimized for ultra-thin materials, combining advanced electromechanical controls with easy operation for consistent, high-quality flattening results. Njdskyrzlopfx Af Sjlg -Key Specifications: Material Thickness: 0 – 0.3 mm. -Maximum Material Width: 1.300 mm Minimum Material Length: 70 mm Quick Change System for Straightening Rollers: Standard. Flattening Gap Adjustment: Electromechanical / PC Controlled. Machine Dimensions (L × W × H): 2,685 × 1,585 × 1,820 mm. Total Weight: 5.000 kg.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06007153/001, total height: 6,050 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 210 kg, construction height: 6,050 mm, input voltage: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial Number: 06007153/001 Year of manufacture: 2006 Total load capacity: 2 x 33,550 kg Load per tray: Medium: 205 kg (evenly distributed) Tray dimensions: 3050 x 864 mm Number of trays: 36 units (more or heavier trays available upon request) Shuttle dimensions (W x D x H): 3380 x 3074 x 6050 mm (Height adjustable to available space) Power supply: 3/N/PE400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid as long as the system is unsold Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed; more or heavier trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Storage capacity with 36 trays: approx. 95 m², each tray approx. 2.64 m² - Electronic volume measuring system with 25 mm grid on the display - Access opening with sliding doors for protection of personnel and stored goods - C2000 Control System, with B/W OP2000 display - LED anti-glare lighting above access point Njdpjxq Tbtsfx Af Selg - Toothed-belt drive for minimal noise - Toothed-belt drive for fastest order picking - Shelf spacing adjustable in 25 mm increments by configuring support profiles, ideal for high-density storage - Weight management system monitors the load per tray - Includes light pointer Price: On request only by e-mail Price: excluding VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from brands such as Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Nodpfxstmqi De Af Solg The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid * Nedpfx Asvc Amtef Selg

Condition: good (used), Max width: 1300 mm Number of rolls: 5 Nedpfeflvf Ajx Af Sjlg With shear

Condition: refurbished (used), Year of construction: 2016, Stainless Slitter 1500x3, made SAMO OCEMI Completely revamped in the year 2016. Technical specifications Thickness minimum: 0,4mm Thickness maximum: Up to 4mm with Rm 400N/mm2 | Up tp 3mm with 700 N/mm2 Coil width: max 1.540 mm. Max coil weight: 16 t Direction: left to right Speed: up to 150 m/min. Scope of supply · Coil car, hydraulic, Over floor · Decoiler, hydraulic expansion, with DC motor 28 kW-717-2.200 rpm, for dynamic brake and energy recovery. Stationary disk brake. Motorized snubber roll. Paper rewinder. Alignment. · Coil opener with telescopic table. · Feeding unit with pinch-roll and 3-rolls straightener. · Centering unit (motorized) with 3 flattening rolls (poliurethane). · PVC film applicator (new 2017) · Slitting head, shaft diam.: 200 mm. DC motor 72 kW 780-2.652 rpm + stationary brake. · Turnstile knife charger – 2 arms couples. · Tension pinch-roll DC motor 23 kW 1.960 rpm + stationary brake. Scrap table, movable, with scrap conveyor. · Scrap rewinder, single drum dimension 600x600. Ac motor 15 kW with inverter. · Bypass table (loop) · Braking car (movable) with: - double separating roll - Deburring pinch-roll (new in 2017) - Felt press - Braking rolls-with DC motor 33kw-2.550 rpm for strip tension adjustment and energy recovery. - Cross cutting shear (crop shear) - Deflector roll - Recoiler, hydraulic expansion, separating arm with automatic lifting system. DC motor 114 kW 800-2.400 rpm + stationary brake. · Discharging coil car, over floor, with press arm. · Turnstile arm 4 x 20 t, motorized · Electric EQUIPMENT (NEW in year 2016). Supply voltage 3x380V Consisting of: Cabinet Dimension mm 5.600 x 600. With PLC Siemens S7-300. N. 3 operator switchboards. The main switchboard with HMI touch-screen Siemens Touch · Hydraulic equipment. Nedpfxeymcmfe Af Selg Hydraulic power pack with oil-air cooling. Manifolds with electric valves on each machine, 24 V DC · Complete safety fences, mechanical/optical. · Cutting tools (knifes approx. 160 pieces, spacers, separating discs..). Documentation Foundation drawings Electric drawings. Hydraulic plan. PLC and HMI Software. CE declaration of Conformity Thickness minimum: 0,4 mm Thickness maximum: Up to 4 mm with Rm 400N/mm2 | Up tp 3 mm with 700 N/mm2 Coil width: max 1.540 mm Max coil weight: 16 t Speed: up to 150 m/min Direction: left to right

Condition: ready for operation (used), functionality: fully functional, Sheet straightening machine, 2100 mm,Sheet Metal Straightening, Plate Leveler Machine 2100 mm Used machine Maximum Sheet Width: 2100 mm (2100x8 mm) Maximum Sheet Thickness: 10 mm (1500x10 mm) Number of Rolls: 11 pcs Roll Diameter: 95 mm Electric Motor: Adjustable speed and direction Njdpfx Afsv Tpv No Sjlg Electrical Data: 400 V, 50 Hz, 36 A, 22.5 kW Includes a roller conveyor.

Condition: used, Electric forklift LINDE, model E25L-01 Serial number: H2X387D01930, Year of manufacture: 2013 Load capacity: 2500 kg Lifting height: 4700 mm Fork length: 1600 mm Fork carrier width: 1150 mm Overall height: 2200 mm Operating voltage: 80 volts - Triplex full-vision mast with 1500 mm free lift - 2x auxiliary hydraulics on the fork carrier for attachments - Battery pack HOPPECKE, type 5HPZS 575, 80 volts, 575 Ah (New battery from 2019) - Automatic charger INDATRON, type D80 volts / 80 amps (New) - 4-wheel superelastic, solid rubber tires, front 225/75-10, rear 200/50-10 - Operator's protective cabin with heater - Hydraulic power steering - 2 LED work lights in front - 1 LED work light in rear - 1 LED Blue Spot light in rear - According to the operating hour meter, 15,995 operating hours - New TÜV/UVV inspection Length without forks: 2500 mm Overall width: 1150 mm Own weight: approx. 4700 kg Nledpfx Ajd Rmx Njf Ssg Good condition

Year of construction: 2003, condition: used, Complete and fully functional sputtering system. Nedpjcw Idtsfx Af Sslg Sold on behalf of a customer! Please contact us if you have any questions.

Condition: used, MURATEC WIEDEMANN MOTORUM 2048 CNC TURRET PUNCH MACHINE MAKE MURATA WIEDEMANN, MADE IN JAPAN MODEL MOTORUM 2048 CONTROL FANUC 30i TOUCH SCREEN YEAR 2016 CAPACITY 20 TONS SHEET SIZE (WITH ONE REPOSITIONING) 1250mm x 2500mm SHEET THICKNESS MAX. 6.35 mm Y, X STOKE Y AXIS: 1360.0 mm X AXIS: 2550.0 mm PUNCHING ACCURACY +- 0.1mm THROAT DEPTH 1340.0 mm MAX ALLOWABLE SHEET WEIGHT 150 KG HIT RATE 1.0T 25 mm PITCH 8.3 mm stroke: 355 HPM Nsdpfx Afoxvch Tj Sslg 0.5 mm PITCH 1.4 mm stroke: 900 HPM SIMULTANEOUS AXIS SPEED 125 m/MIN PUNCHING ACCURACY +- 0.1 mm TURRET INDEX SPEED 35 RPM COMPRESSED AIR QUANITY: 100NL/MIN PRSSURE: 0.5 MPa POWER SUPPLY 19 kVA PLUS GOOD SET OF TOOLING ONE OWNER FROM NEW VERY LESS HOURS SAFETY GUARDS