Used Lorenz Brm50/1720.21-Wd-Sw-Zw for sale (2,263)

Condition: used, Year of construction: 2001, sheet width 1650 mm plate thickness 0,5- 3 mm number of rolls 21 straightening feed 0- 60 m/min Dodpfxezafi No Ailjcn straightening roll diameter 50 mm adjustment 30 mm weight of the machine ca. 24,5 t dimensions of the machine ca. 4,5x 2 x 2,8 m voltage 400 V passage width 1720 mm number of support rolls 18 main drive motor 45 kW run-in height 1250 mm 6 HI High-performance straightening machine with 21 rolls for fine straightening work of steel or non-ferrous metals. Machine has 23 intermediate rolls and 18 support points. Working rolls are adjustable with DRO in 0,01 mm. Main Gearbox was renewed in 2021.

Condition: used, Year of construction: 1997, material width 820 mm coil weight 7,5 t material thickness 0,8 - 5,0 mm coil internal diameter 470 - 520 mm coil external diameter 1600 mm material cross-cut 1600 mm² no. of straightening rolls 7 straightening roll diameter 50 mm number of draw-in rolls 2 speed 0 - 40 m/min Decoiler HH 7500.1 with: - hydraulic expansion and automatic re-tensioning - material centre adjustment - adjustable pneumatic disc brake - counter-holder with quick clamping - circular guard ring - fixed coil loading chair Insertion aid consisting of: - snubber roll (driven) Djdpfx Aezrpp Aoiljcn - infeed wedge - hold-down roll Straightening machine BRM 50/820.7 with: - automatic circular oil lubrication of the cardan shafts - torque-dependent overload protection - motoric roller cassette adjustment with digital display - quick-change device of the cardan shafts - quick-change device of the straightening rolls Transfer table + ultrasonic control BÜU-5 with: - loop control via ultrasonic sensor (analogue) - strip sag monitoring (min/max) - strip end monitoring

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single-sided unwinding reel ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Spreader: hydraulically operated Presser arm: hydraulically operated Take-up reel with auxiliary drive and brake Coil loading table, fixed + reel traversing device including: Lg 33221 High-performance strip straightening machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no. 001669 Maximum pass width: 620 mm Number of straightening rollers: 9 Straightening roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rollers are multiply supported to prevent deflection. Dedpohigmbofx Ailocn Drive for all rollers via a distributor gearbox and universal joints. Used, as is, ex warehouse, immediately available. Overhaul possible upon request. Delivery time upon agreement. Further data will be available shortly or upon request.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 000326, number of straightening rollers: 7, coil weight: 7,500 kg, coil outer diameter: 1,800 mm, coil inner diameter: 508 mm, product height (max.): 5 mm, number of feed rollers: 2, straightening roller diameter: 50 mm, sheet thickness steel (max.): 5 mm, coil width: 800 mm, Lg 35024 Belt conveyor in long design LORENZ BRM 50/820.7-HH7500.1 Coil weight max. 7500 kg Coil width max. 800 mm Material thickness 0.8 to 5 mm (steel with yield point approx. 300-350 N/qmm) Number of straightening rollers 7 Dcedpfetrlzaex Ailjn Further data and detailed offer on request.

Condition: used, functionality: fully functional, functionally tested; item originates from the dismantling of equipment at an automotive supplier Dedpfxozmm N Nj Ailscn Manufacturer: Phoenix Contact Type: MCR-S-1-5-UI-SW-DCI Description: Universal signal converter from Phoenix Contact for galvanic isolation, amplification, and conversion of current and voltage signals. Designed for precise signal transmission between the field and control levels in industrial automation systems. Input signal: 0–5 V / 0–20 mA, switchable Output signal: 0–5 V / 0–20 mA, switchable Supply voltage: 24 V DC Accuracy: < 0.1 % Galvanic isolation: 2.5 kV Operating temperature: -20 °C to +60 °C Mounting type: DIN rail (35 mm DIN rail) Connection type: Screw terminals

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 230 V, total width: 830 mm, total length: 870 mm, total height: 1,710 mm, overall weight: 150 kg, operating temperature: 60 °C, compressed air connection: 6 bar, Lorenz FMP04 Filter Test System, 2021 – EN 143/149, ISO 16900-3 – €47,900 net, negotiable Test respirator filters and masks (FFP and medical face masks) in-house instead of paying for lab time: the Lorenz FMP04 automatic filter test system measures filter penetration and breathing resistance in a single run, with results available within seconds. New price currently: approx. €95,000 net. Your price: €47,900 net (negotiable), ex works (EXW) Hamburg. One unit only, lightly used. What you get: • Standards-compliant testing according to EN 143, EN 149, ISO 16900-3, ISO 17420-2, and NIOSH 42 CFR Part 84; all parameters adjustable for customer-specific tests. • Two laser aerosol photometers (upstream and downstream) with automatic reference calibration and auto-ranging across six orders of magnitude. • Aerosol generator using paraffin oil heated to 60 °C, automatic oil supply from external reservoirs, software-based switching between standards. • Quick-change filter holder, Ø 112.8 mm (100 cm²), face velocity 5–40 cm/s, automatic flow reversal; canister filter adapter plate. • Extension for differential pressure testing per EN 14683 Annex C.4 (surgical masks) with adapter plates (2.5 cm bore); a €1,836 option in 2021. • 15" full-HD touchscreen, integrated PC, filter database, test history, CSV export, test reports with your logo, graphs for loading tests; USB and network. • Flow 8–300 l/min, efficiency 0.0001–100 %, breathing resistance 5–1,000 Pa (manufacturer data for the FMP04 series). • Scope: all adapter plates and accessories are included. Specifications: built 2021, approx. 150 kg, 870 × 830 × 1710 mm, 115/230 V. Requires compressed air ≥ 6 bar, ≥ 50 l/min (oil-, water- and particle-free). Djdpez Inf Sjfx Ailscn Please note: service is due. The unit has seen little use. Service and recalibration are due and are already reflected in the price. Why act now? Inspection and a test run in Hamburg can be arranged. Sold ex works (EXW) Hamburg. Inquire today: response within one business day. Price negotiable. Location: Hamburg, Germany.

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, wheel width: 200 mm, stroke length: 230 mm, feed length X-axis: 500 mm, type of input current: three-phase, total height: 2,900 mm, table load: 2,750 kg, table diameter: 1,005 mm, overall weight: 12,000 kg, input frequency: 50 Hz, total width: 3,300 mm, total length: 3,800 mm, distance table to spindle center: 640 mm, gear diameter: 1,000 mm, distance table center to spindle nose: 640 mm, workpiece diameter (max.): 1,000 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Siemens Sinamics S120, control type: CNC control, stroke rate (min.): 15 1/min, stroke rate (max.): 510 1/min, The universal machine for gearings that cannot be milled: The Lorenz LS 1000 CNC machines internal and external toothed spur gears up to 1000 mm in diameter – hollow gears for planetary gearboxes, gear rings, couplings, gears with a flange or chamfer. Completely modernized with Siemens Sinumerik ONE, new electrical system, hydraulics and lubrication, designed for maximum performance and accuracy in flexible manufacturing. Acceptance according to DIN and manufacturer's standards with a protocol. Offered by Serwema Retrofit Solutions, Chemnitz. Dcodpsz E H Rnjfx Ailsn The LS 1000 was developed as a universal machine for construction machinery, wind turbine and machine tool gearboxes, mining technology, aerospace and textile machines, and is suitable for both single parts, small series and large series. The main application is the hobbing of straight-toothed and – with a helical guide and matching cutting wheel – helical-toothed spur gears with internal or external teeth. With software options, the machine can also process non-circular gears, grooves and cams; with special cutters, couplings as well as involute and spur gears are produced. The Sinumerik ONE with electronic gear unit guides the user through workpiece and tool data using masks, without the need for programming.

Condition: used, functionality: fully functional, total height: 1,100 mm, table diameter: 310 mm, overall weight: 5,000 kg, total width: 2,300 mm, total length: 1,800 mm, For sale is a gear hobbing machine as shown in the attached pictures. Manufacturer: LORENZ Max. wheel diameter: 500 mm Max. module: 5 Max. gear width: 100 mm Max. gear shaping length: 75 mm Number of strokes/min of the cutter: 45 / 424 Dcsdpjzz Ilnefx Ailjn Cutting speed: 18 Screw diameter: 78 mm Max. gear shaping diameter: 500 mm Max. external shaping diameter: 500 mm Max. internal shaping diameter: 450 mm Hole diameter of the table: 125 mm Diameter of table: 310 mm Total power: 3.0 kW Voltage: 220 / 380 V

Condition: excellent (used), functionality: fully functional, power: 74.9 kW (101.84 HP), fuel type: diesel, overall weight: 10,500 kg, operation weight: 10,500 kg, first registration: 01/2009, Year of construction: 2009, operating hours: 4,809 h, Wacker Neuson 9503 EW/SW/4X4X4/Hydr. Adjustable / 4800 hours • Manufacturer: Wacker Neuson • Type: 9503 WD • Year of manufacture: 2009 • Operating hours: 4809 hours • Overload warning device • Transport dimensions: L: 5.88 meters x W: 1.92 meters x H: 2.88 meters • Power: 74.9 KW/102 hp • Engine: Deutz TCD 2012 • Maximum reach: approx. 6 meters • Digging depth: approx. 3.6 meters • Mechanical quick coupler system • Quick coupler: Lehnhoff / SW08 • High and low speed gears • Immobilizer • Auxiliary hydraulics • All-wheel steering 4x4x4 • Dozer blade Dcjdpfx Aiezduh Ueljn • Total weight: 10500 kg • German machine • First owner • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: good (used), Year of construction: 1986, machine/vehicle number: 2967, Tränklein gluing machine ZW-D 500, with cardboard device, machine number 2967, built in 1986, machine is in good condition, available immediately Djdpfx Aovvirijiljcn If you are interested, we would be happy to inform you about other machines in our company. You are welcome to view the machine in our company by prior appointment.

Condition: ready for operation (used), Equipment: documentation/manual, Lieberr - Lorenz S800 / Gear Hobbing Machine -Well-maintained machine with extensive accessories -1 pallet / Change gears -1 pallet / Hobbing cutters Dcsdpfjzv Ed Dox Ailjn -1 pallet / Clamping arbors DOCUMENTATION -Max. workpiece length with counter support 600mm -Max. workpiece length with retracted counter support 800mm -Max. travel of the milling slide 360mm -Largest millable pitch with the largest workpiece 5 PI / Normally 8 PI -Taper for spindle - Milling spindle MK 5 -Milling arbors / 22 / 27 / 32 / 40 mm -Max. cutter diameter 186mm -Max. cutter length 170mm -Max. cutter feed 80mm -Cutter speeds 40 - 220 rpm -Feeds infinitely adjustable / Horizontal -Feeds infinitely adjustable / Vertical -Feeds infinitely adjustable / Tangential -Clamping table without water trough 550mm -Clamping table bore 100mm -Clamping arbor taper MK 4 Dimensions: L x W x H 3.6 x 1.8 x 1.9 meters / Weight: 5000 kg Errors and omissions excepted.

Condition: used, Year of construction: 1988, machine/vehicle number: 14411, stroke length: 220 mm, table diameter: 730 mm, For sale is a Lorenz LS 630. A robust and precise machine, renowned for its high build quality. The machine requires technical refurbishment due to the control system, but is in very good mechanical condition. It can process components up to module 12. A stable and high-quality Lorenz LS 630 that can be made fully operational again with some effort. Dcsdpfx Aisxrcmbelsn

Condition: used, Year of construction: 2023, operating hours: 2,594 h, functionality: unexamined, machine/vehicle number: 6000030, total height: 3,400 mm, total length: 8,000 mm, total width: 6,000 mm, overall weight: 27,523 kg, number of spindles: 1, Equipment: chip conveyor, Installation dimensions: 8000 x 6000 x 3400 mm Weight: 27,500 kg Operating hours: 2,594 h KNOLL aerosol extraction system AerosolMaster 4000 ATS S/N 1580192 Year of manufacture: 2022 Djdpfozbt D Dox Ailocn KNOLL chip conveyor 750 K-1 S/N 1591356 Year of manufacture: 2023

Condition: ready for operation (used), Year of construction: 1990, total width: 3,900 mm, total height: 3,400 mm, travel distance X-axis: 360 mm, travel distance Z-axis: 154 mm, overall weight: 9,000 kg, product length (max.): 5,300 mm, table load: 1,000 kg, number of axes: 3, This 3-axis LORENZ LS 424 shaping machine was manufactured in 1990. It features a maximum wheel diameter of 420 mm and a stroke rate of 32 - 800 strokes/min. The machine has an impressive X-travel of 360 mm and a Z-travel of 154 mm, with a maximum table load of 1000 kg. If you are looking to get high-quality shaping capabilities, consider the LORENZ LS 424 machine we have for sale. Contact us for further details. Dcodpoz Hk Iyofx Ailsn - Control Defect: Control unit reported as defective - Wheel Diameter Max.: 420 mm- Wheel Width: 120 mm- Module Max.: 8- Module Min.: 0.5- Control Unit: BWO CNC- Stroke Rate: 32 - 800 strokes/min (infinitely variable 25 - 800 strokes/min)- Total Power Requirement: 50 kW- Machine Elevation: 200 mm- X-Travel: 360 mm- Z-Travel: 154 mm- L-Travel: 137 mm- External Gear Cutting Max. Outer Diameter: 420 mm- Internal Gear Cutting Max. Inner Diameter: 370 mm- Workpiece Outer Diameter: 420 mm- Max. Stroke Length: 130 mm- Wiring Diagram: E8 Additional Equipment: Straight Guide, Leveling Feet

Condition: used, machine/vehicle number: 62220966,

Condition: new, range L-W-H 745 x 525 x 915 mm weight 93,5 kg 7 St. Workshop trolley filled with 283 quality tools. Fixed ball bearing guides (double bearings), anti-slip mat in each compartment, Djdpfsu Imk Dex Ailecn Thick rubber top mat, central locking, 4 heavy duty wheels 125 x 50 mm. including 2 swivel castors with brakes, 2 keys. Tool trolley is equipped with 283 tool parts, including: 3 pcs socket wrench sets: 1/4" from 4 - 14mm, 3/8" from 9 - 22mm and Torx from 8 - E20, 1/2" from 8 - 32mm. 3 sets of ratchet ring wrenches from 8 - 19mm, Ring spanner set from 6 -32mm. Various screwdriver sets, bit sets for socket wrench sets, various Allen keys and much more. See pictures.

Condition: like new (used), number 1 Stück LORENZ disc cutting wheel HM: HB10 - F Z2/Z0= 15/60 14 - 44C 46 711/1 Dsdpfx Aszupl Ajiljcn mn3.08 an21° z60

Condition: good (used), functionality: fully functional, Facing and centering machine FZWD 160. Dcodpfx Aijz E Aw Delen

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 01305-1, type of input current: three-phase, cooling capacity: 6 kW (8.16 HP), Manufacturer: Seydelmann Model: WD 114 Machine no.: 01305-1 Type: Industrial meat grinder Robust and professional Seydelmann WD 114 meat grinder, suitable for grinding and processing meat in butcher shops and industrial meat processing companies. Dcodszxf Izopfx Ailon The machine is largely made of stainless steel and is known for its solid construction, high reliability, and hygienic design. Technical specifications: Cutting plate diameter: 114 mm Hopper capacity: approx. 60 liters Capacity: up to approx. 1,000 kg/hour, depending on product, cutting plate, and application Motor power: approx. 6 kW 2 speeds on the feed screw Stainless steel feed screw Stainless steel worm housing Stainless steel locking nut Robust industrial construction Hygienic and easy to clean Suitable for professional and industrial use The Seydelmann WD 114 is a compact yet powerful machine and is particularly suitable for companies looking for a reliable, professional meat grinder with a high processing capacity.

Condition: used, Year of construction: 1979, max. wheel diameter 420 mm gear width 120 mm max. module 7 mm min. module 0,5 gear hobbing diameter - external 420 mm gear hobbing diameter - internal 370 mm table diameter 400 mm boring diameter 125 mm spindle stroke 120 mm stroke position adjustment 230 mm strokes - infinitely variable 30 / 800 Hub/min depth feed stepless 0,016 - 0,063 mm/Hub total power requirement 35 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 2,46 x 3,48 x 2,66 m Accessories: - Various replacement wheels and blade holders - Documentation Dsdpozv Ulqofx Ailjcn

Year of construction: 2021, condition: ready for operation (used), An automatic Lorenz filter test station for the automatic testing of filter media, half masks, canister filters, and medical face masks is available. Standards: EN143/EN149/EN14683/ISO16900-3 and more, module components: flow meter/photometer upstream and downstream of the test specimen/aerosol generator/suction and extraction unit, aerosols: paraffin oil/Emery oil/DOP/DEHS, volume flow range: 8L-300L/min, min. separation efficiency measuring range: 0.0001%, min. breathing resistance measuring range: 5Pa-1000Pa, max. filter air velocity: 10.2cm/s, max. test area: 237.8cm³. The device has been used little and would not need to be serviced. Documentation available. An on-site inspection is possible. The image is an example. Dcsdpfxjy Tx Slj Ailen

Condition: like new (used), number 1 Stück LIEBHERR/LORENZ disc cutting wheel Modul 4 - EW 30° - Zähne 12 - DIN 5480 - new Dcedszupmaepfx Ailsn

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, rotary table diameter: 1,200 mm, position of the milling head: Schwenkbar (45°), table diameter: 1,200 mm, total length: 5,250 mm, gear diameter: 1,250 mm, total height: 4,420 mm, total width: 4,700 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 160 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 1,000 mm, overall weight: 22,000 kg, distance table to spindle center: 780 mm, tool diameter: 260 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A ZFWZ 10 module for large gears up to 1250 mm in diameter and module 22, which was completely overhauled in 2009 by SerWeMa and converted to a Siemens Sinumerik ONE with six CNC axes. The machine is in operational condition in our hall in Chemnitz: you can inspect it while it is running, we can mill your own sample part on request, and you can pick it up from us. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul, owns the module drawing archive, and knows the machine inside and out. The ZFWZ 10 is the classic Chemnitz gear hobbing machine for gearbox construction, crane and conveyor technology, mining, and heavy machinery construction: heavy cast iron bed, 1200 mm table, milling head with ±45° swivel range. It mills spur and helical gears up to module 16 in hobbing and up to module 22 in single indexing. With 1000 mm of axial travel between the cutter axis and the table surface, long shafts and large workpieces can be securely clamped. The Sinumerik ONE controls all six axes with an electronic gear train; the SerWeMa gear software guides you through workpiece and tool data via masks, without requiring programming. Technical data: max. workpiece diameter 800/1250 mm, table diameter 1200 mm, distance between cutter axis and table axis 80–780 mm, distance between cutter axis and table surface 350–1350 mm, max. module 16/22, max. cutter diameter 260 mm, max. cutter length 350 mm, tangential travel 250 mm, cutter speed 20–160 rpm, swivel angle ±45°. Installation dimensions approx. 5.25 × 4.7 × 4.42 m, weight approx. 22 t. Dcjdpsz E Hy Aofx Ailsn Equipment: Siemens Sinumerik ONE control with six CNC axes, machine enclosure, magnetic chip conveyor, central and loss lubrication, hydraulic unit, coolant system, operating manual. We offer the conversion to Siemens Sinumerik ONE with Sinamics S120 and a new control cabinet, either before delivery or later at your plant – then with a guarantee on the new electrical equipment. Also optional: sample part milling in our plant, geometry acceptance according to DIN, installation and commissioning at your site, operator training. Spare parts and service are provided from a single source, worldwide, even after the purchase.

Condition: used, Year of construction: 2005, For wine and sparkling wine bottles Dcedpfx Aez Ia Avsilon Type: WD/ 12 capacity / hour ca.: 6000

Condition: used, max. wheel diameter 500 mm gear width 75 mm Dcjdpfx Ajzw N E Uoilen max. module 5 min. module 0,5 no. of strokes 45 - 424 Hub/min total power requirement 6 kW weight of the machine ca. 3,6 t dimensions of the machine ca. 2,0 x 1,4 x 2,3 m Rapid traverse in the table. Change gears, toolholders, manuals.