Plassma spring

Kjellberg Hifocus 280i

Condition: new, Fastech 3-Roll Round Bending Machine FRM 1250 x 90 Technical Specifications: Special equipment included in the price: hardened rollers motorized rear roller adjustment digital display Sheet metal width 1250 mm Sheet metal thickness 3.0 mm max. Sheet metal thickness 2.5 mm for pre-bending Roller length 1250 mm Roller diameter 90 mm Smallest bending diameter 130 mm Weight 500 kg Dimensions L-W-H 1950 x 900 x 1130 mm Motor: 1.1 kW Equipment: Top and bottom rollers, electrically driven Top roller can be swung out Hedpshzq Dqjfx Amyer Taper bending device asymmetrical roller arrangement self-braking main motor separate control and operating panel safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg Hedpeul Svljfx Amyjr The machine is fully refurbished and tested.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, Model: C3 Working Area: 3048mm*1524mm Laser Output Power: 40kW/30kW/22kW/20kW/12kW/6kW/3kW/2kW/1.5kW Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Hedog D Ntmepfx Amyjr Max. linkage speed: 110m/min Max. acceleration: 1.5G 1.Active Anti-collision Function Effectively reduce the damage rate of laser heads, help you save maintenance cost. 2.One-click Processing All functions of the system are distributed logically and orderly to achieve fully automatic mass production. 3.No Quiver when Cutting Thin Sheet C Series is capable of cutting edges of thin sheets and ensures no quivering marks. 4.Stretching Aluminum Crossbeam Rigidity increases by 60% Weight goes down by 20% Equipment running speed increases by 50% 5.Welded Bed with Tenon-and-mortise Joint Each frame of bed is welded after mortise-and-tenon joint to achieve better stability and firmness.

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Hsdpfjh Hd A Sjx Amyor Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Hedpfx Aewp Nv Homysr Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: used, Year of construction: 1988, Technical details: turning diameter over bed: 360 mm Hedju Rqabspfx Amyer turning dia. over face-slide: 160 mm turning length: 800 mm longitudinal traverse (z-axis): 810 mm facing movement (x-axis): 205 mm control: TX-8 spindle passage: 60 mm revolution per minute: 63 - 3150 / 2 step U/min feed:: 10.000 mm/min. tool turret - number of stations: 8 operating hours - idle run: 8834 h tailstock taper ISO: SK30 DIN 2080 tailstock quill stroke: 105 mm operating pressure: 40 bar total power requirement: 38 kW Weight approx.: 3,1 t dimension machine xH: 1,8 x 3,3 x 1,8 m dimensions of hydaulic: 580 x 400 x 750 mm Equipment: Lathe chuck Ø 200 mm, hydraulic Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system control panel Accessories Fine adjustment device for tool set-up *

Condition: used, Year of construction: 2002, turning diameter max. 420 mm turning length 1250 mm control INDEX, C 200-4 D swing diameter 630 mm travel x1 320 mm travel z1 1250 mm travel x2 170 mm travel z2 1250 mm travel x3 320 mm travel z3 1250 mm main spindle speed max. 3000 U/min main spindle drive 53 kW spindle passage 102 mm spindle head DIN 55026 Gr. 11 max. torque on the spindle 675 Nm sub spindle - spindle speed range max. 3000 U/min sub spindle drive 53 kW sub spindle - spindle passage 102 sub spindle - spindle head DIN 55026 Gr. 11 sub spindle - spindle torque 675 Nm travel sub spindle 1250 mm feed power X1 14000/Z1 14000 N rapid traverse X1 20/Z1 40 m/min feed power X2 8600/Z2 14000 N rapid traverse X2 20/Z2 40 m/min feed power X3 14000/Z3 14000 N Hedpfx Aot U R Hzemyjr rapid traverse X3 20/Z3 40 m/min numbers of turret head positions Rev. 1 = 12 numbers of turret head positions Rev. 2 = 10 numbers of turret head positions Rev. 3 = 12 number of driven tool stations 12 / 10 / 12 speed of driven tools max. 6000 U/min max. torque 36 / 21 / 36 Nm tool taper DIN 69880 tool taper ø 40 x 63 mm total power requirement 120 kW weight of the machine ca. 19 t dimensions of machine L x W x H 5,77 x 2,47 x 2,62 m Accessories: segment bushing chuck HAINBUCH on main spindle, collet chuck HAINBUCH, SPANNTOP SP on sub spindle, various tool holders (also for driven tools), chip conveyor, coolant - all 3 turrets are prepared for coolant through spindle, but the highpressure coolant pump and tank are not with the machine -

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 1050 mm plate thickness 3.3 mm pre-bending 3.0 mm roll length 1050 mm roll diameter 90.0 mm min. dia. 130 mm engine output 1.10 kW weight 570 kg range L-W-H 1.800 x 800 x 1.130 mm Exhibition machine from 2026 With only approximately 2 operating hours Condition like new Special price upon request Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Hjdpfx Ajw U U Udemyor Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: good (used), Year of construction: 2003, All parts shown by hand not come. Hodoyyniaepfx Amyer Technical details are shown on picture.

Condition: new, Year of construction: 2025, - Capacity 4 mm - Hydraulic roller adjustment - Foot control - Brake motor - Hydraulic pressure adjustment - With 3 sets of rollers - Emergency stop - 400V Hjdpfxsq Tdm Aj Amyjr