Knuckle-Joint Press

Graebener GKMP 360

Condition: used, Year of construction: 1993, 1500 mm tank diameter / tank height 1500 / 500 mm Dwodpfx Aexq Hg Askvja turning speed range 1500 U/min voltage 380 V volumn 300 Liter power requirement 18 kW weight of the machine ca. 1,2 t dimensions 1,5 x 1,6 x 1,6 m Vibration dryer See ??pictures

Condition: as good as new (ex-display), Year of construction: 2026, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Feed height: 200 mm Feed width: 500 mm Number of chipper knives: 2 pieces Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Throughput rate: up to approx. 20 rm/h * Chipping length: approx. 30 mm Dedpow I R Rnjfx Akvjwa Chipper drive power: 45 kW or on request Feed roller drive power: 2 x 2.2 kW Operating/control voltage:400/220 V, 50 Hz Weight: 2,600 kg *depending on chipper length, kW main motor, number of knives, feed S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Year of construction: 2026, condition: new, With the separation of milled lumber, laid loose or as a package, already milled lumber can be processed economically. In a two-stage process, the lumber is separated for further processing. It is also possible to insert the separated lumber in a controlled manner in a running process. Dwjdpfx Aeg Rxhgokvea The feeder is mechanically designed in such a way that even crooked logs can be fed in safely. In addition, it can be adjusted to the diameter of the wood so that only one piece is transported further, thus avoiding stoppages in the further process.

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm Djdpfx Ascxxx Rjkvswa weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Djdpfxolccvms Akvswa Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

Condition: excellent (used), Year of construction: 2021, operating hours: 4,236 h, functionality: fully functional, travel distance X-axis: 625 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: FANUC, controller model: FANUC 31i-MB5, workpiece height (max.): 450 mm, workpiece diameter (max.): 550 mm, workpiece weight (max.): 400 kg, total height: 2,900 mm, total length: 3,400 mm, total width: 2,700 mm, table load: 400 kg, rotary table diameter: 500 mm, overall weight: 7,500 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 2,102 h, coolant supply: 70 bar, distance table center to spindle nose: 550 mm, spindle motor power: 11 W, spindle nose: ISO 40, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 75 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Used 5-axis vertical machining center with FANUC CNC, optical scales on the x-y-z axes, 60-place tool magazine and 70 bar pump and TS27R tool pressure probe + MP60 probe Dwjdpfx Akszfp U Eovoa

Condition: used, Year of construction: 1957, turning diameter over bed 800 mm turning diameter over slide rest 540 mm turning length 4000 mm centre height 400 mm centre distance 4000 mm spindle turning speed range 9 - 1140 U/min Dwedpfx Aoxwp Ehskvea spindle passage 96 mm weight of the machine ca. 8,5 t dimensions of machine L x W x H 7,0 x 1,70 x 1,70 m - with gap with insert - Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolant

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore Dwedpfjxtbf Eox Akvoa 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), GENERAL CHARACTERISTICS Max. Ø to be ground 120 mm Grinding wheel width 250 mm Minimum Ø to be ground 1 mm Ø drive grinding wheel 304 mm Ø working wheel 508 mm Dwodpfjrpnf Aox Akvoa DIMENSIONS AND WEIGHT Height 1,700 mm Width 1,500 mm Length 2,750 mm Weight 4,000kg ELECTRICAL CHARACTERISTICS Grinding head motor power 15 Kw Spindle head motor power 1,8kw Hydraulic motor power 1,1kw Total power 20 kW Voltage 220/380 V

Condition: excellent (used), Year of construction: 2004, winch inkl. lifting capacity max. 2t. auf 2,7 Meter lifting capacity max. 1 Tonne auf 5,3 Mete Dodpfx Aoq N E U Ajkvswa Number of working hours 270 h electrical ja