Center Lathe

HEYLIGENSTAEDT 400 Ea/4000

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Gbedpfx Agjrtd Uwjbjg Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 103 mm Tip width 1000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Gsdpfx Aod I A Dhjgbjbg Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Quilltravel 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,750.00 kg Dimensions 2500 x 1100 x 1380 mm

Condition: used, Year of construction: 1987, turning diameter over bed 0560 mm turning diameter over slide rest 325 mm turning length 1500 mm spindle bore 62 mm spindle turning speed range 11,2 - 2240 U/min Gedow Ny S Depfx Agbebg total power requirement 9 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,6 x 1,6 m With Multifix incl. 2 holders, chuck, rotating center and DRO.

Year of construction: 1985, condition: ready for operation (used), Table dimension: 1435x460mm, T-groove number/ width/ distance: 5/ 16/ 80mm, controls: TNCi-120, length: 1435mm, width: 2330mm, height: 1648mm, weight: 3,1t, with documentation, accessories are available, no defects known, an inspection is possible. Gsdpslbmupefx Agbobg

Condition: new, 1 brand-new universal milling head "HURON" system Make: EMENA Model: V 0, ISO 40, normal Technical data: Mounting ISO 40 Projection 270 mm Rated drive power 5 HP Gedpfx Aebpmv Ssgbjbg Max. speed 1800 rpm Weight approx. 32 kg Design: Standard, with adapter plate / mounting flange finished on the head side, unmachined on the machine side, for retrofitting to conventional, NC or CNC milling machines or drilling machines of any kind, "HURON" system Option: - Raised version Delivery time: approx. 3 months, after receipt of order and payment Illustrations are similar! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: good (used), Year of construction: 1988, turning diameter over cross slide: 900 mm, spindle bore: 105 mm, turning diameter: 1,200 mm, turning length: 5,000 mm, total length: 8,000 mm, total width: 1,800 mm, total height: 1,550 mm, bed width: 650 mm, workpiece weight (max.): 10,500 kg, Motorized tailstock CE-Chuck cover protection Telescopic guide cover over guideways Steady rest  4 chuck 1000 mm diameter 3 chuck 500   mm diameter   2 Axis digital read out system DBC Turning Length: 5000mm Swing over bed Ø: 1150mm Swing over cross slide Ø:850mm Spindle bore: 105mm Bed width: 650mm Tailstock spindle Ø: 140Ø Stroke pinole: 300mm Spindle taper: 6Mk Speeds / ranges: 4,5 - 900Rpm Workpiece load: 8000 Length: 8000mm Width: 1800mm Height: 1550mm Weight: 13800kg Gbjdpfjwrxpbjx Agbeg

Condition: good (used), Year of construction: 1989, machine/vehicle number: 01-15792, Offer 24194 Technical data: - max. working width 2040 mm - max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Bending angle lockable with end stop - Upper beam is operated with side hand crank Gbedpfjtylguox Agbog - max. stroke upper beam 85 mm - Max. adjustment of bending beam 80 mm - Bending process is supported by eccentric weight - Space requirement approx. W 3250 x H 1250 x D 450 mm - Weight approx. 1620 kg

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Year of construction: 2001 Center height: 180mm Center width: 1000mm spindle passage: Ø 56mm max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly Gbedpfethd Shsx Agbsg - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: used, Year of construction: 1952, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 520 mm turning length: 2500 mm support travel z-axis: plan: ca. 500 mm support travel z-axis: Obersupport: ca. 300 mm centre height: 300 mm spindle passage: 90 mm range of revolution per miute: 3,2 - 382 / 22 step U/min range of feed in x - axis: längs: 0,213 - 2,67 / 36 step m/min range of feed in y - axis: quer: 0,070 - 1,11 / 36 step m/min tailstock quill taper MT: 6 Gsdpfx Ageu Tq U Isbebg total power requirement: 22 weight of the machine ca.: 8,2 t dimension machine xH: 5,3 x 1.,6 x 1,6 m transport measurements machine: ca. 5,5 x 1,7 x 1,6 m Equipment: Faceplate Ø 1000mm 4-fold turning tool holder Lynette Ø 250 closed Accesorios four-jaw chuck Ø 630 i.D. *

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 500 mm turning diameter over support: 280 mm turning length: 1500 mm centre distance: 1500 mm turning dia. in gap: 730 mm spindle bore of work spindle: 65 mm range of revolution per miute: 25-1250 / 32-1600 / 36-1800 - 18 step U/min feed:: 0,05 - 8,5 mm rapid motion - x-axis: 4 m/min rapid motion - y-axis: 1,26 m/min tailstock quill taper MT: 5 tailstock quill adjustment:: 200 mm total power requirement: ca. 8,2 kW weight of the machine ca.: 2,5 t dimension machine xH: 3,2 x 1,3 x 1,5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 - 2.8 mm (clutch end position switching not functional, manual switch-off necessary) Top slide with 4-fold tool holder Steel plate Ø 705mm with offset threaded holes Gbsdpju Ixznjfx Agbeg *