Gluing press / Gluing stand

Emmes

Condition: like new (used), WEINIG Hydromat H30N, S/N 253-886, year 1991, 9 spindles Hydromat H30 with short infeed table and heavy 6-roller infeed - Working width max. 300 mm - Working height max. 140 mm - Electronic feed infinitely variable 12 - 120 m/min. - Feed motor 22.0 KW - 1st spindle bottom 11.0 KW - 2nd spindle right 11.0 KW - 3rd spindle left 15.0 KW - 4th spindle left 11.0 KW - 5. spindle right 11.0 KW - 6. spindle top 22.0 KW - 7. spindle bottom 30.0 KW - 8. spindle top 11.0 KW - 9. spindle bottom 11.0 KW - All spindle motors with electronic brake - COMPLETELY NEW MILLING SPINDLES - Spindle diameter ø 50 mm - Spindle speed 6,000 rpm. - 6 driven rollers in the table - hard chrome plated - Spindle 1 + 6 + 7 + 8 + 9 with NEW counter bearing - Hydraulic counter bearing clamping Lhodpfx Aotynpxeg Rep - Spindle 2 + 3 + 8 + 9 with straight jinter - Spindle 4 + 6 pneumatic pressure - NEW feed rollers D=170 mm - Hard chrome-plated table tops - Hard chrome plated stops - - Heavy pressure rollers from above - pneumatic - Heavy pressure rollers from the side - pneumatic - Automatic table lubrication - NEW - Central position of the lubrication points - NEW control panel free-standing, 5m cable - NEW free-standing control cabinet, 5m cable - Operating instructions, spare parts list and wiring diagram + Many NEW spare parts / accessories. Dimension: - Total length approx. 6,150 mm - Total width approx. 2,160 mm - Machine weight approx. 9,500 KG Connected load: - Total connected load approx. 157 KW Condition: Machine as shown on the photos - technically as good as new Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: At any time by appointment Offers + inquiries only with complete company data Subject to errors and prior sale

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: SK-K-24001, Optimizing cross-cut saw line with scanner Manufacturer: Dimter Type: OptiCut 450 Year of manufacture: 2015 Item no.: SK-K-24001 DIMTER cross-cut saw line with 1 x OptiCut 450 and F 100 feeding system Lodpfx Aswya Syog Rohp with LuxScan CombiScan+ C 200 and curvature measurement The line was in operation until 2024, has been professionally dismantled and can be viewed.

Condition: reconditioned (used), Year of construction: 2002, Longitudinal profiling machine for parquet 4+4 motors Minimum working width 80 mm M+F profile Lhodpfxsvxz Sys Ag Rop

Condition: used, Year of construction: 2007, No. 3177 Optimizing cross-cut system Grecon Dimter OptiCut 200-1 Used, year of construction 2007 For cross-cutting fixed lengths Wood dimensions to be processed: Input lengths min./max. 3000 - 5000 mm Input widths min./max. 80 - 200 mm Input thicknesses min./max. 38 - 80 mm Timber cross-sections max. 200 x 50 Final timber length min./max. 700 - 1000 mm Average number of cuts / board 5 Wood types: Softwood or hardwood Performance of the system: Feed speed max. 180 m/min, infinitely variable Time per cross-cutting process incl. brakes 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt in front of saw Length 1.5 m coupled with feed motor of the saw Item 2: OptiCut 200-1 automatic cross-cut saw in left-hand design With built-in length measuring wheel and built-in blow-out device for waste Graphics-capable input terminal, 1 / 4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is fed from the left Pos. 3: Outfeed conveyor belt / sorting station with drive unit, without ejector Belt length approx. 1.5 m Machine already dismantled and stored The infeed table was not used by the previous owner. 2 feed rollers were installed for the material feed. The conveyor table is there, only the rubber belt is missing. Sale on behalf of customer, ex location Austria, without transportation and assembly Errors in description and price excepted Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Lhedpfsu Atmuox Ag Rjp For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 1980, condition: ready for operation (used), An old drying kiln (approx. 40 years old) Brunner is available. External dimensions X/Y: approx. 6000mm/8000mm. On-site inspection is possible. Lsdpfx Ajvbigwsg Rshp

Condition: used, Year of construction: 1997, Beam planer 260 x 160 mm, trailing chamfering unit on upper spindle, air cushion table with dual-axis control for left and upper spindle, brand new control system (latest Weinig version) Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 units 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Electric height adjustment for upper spindle Lsdewwwkhjpfx Ag Rohp Optional with/without feed system Feed brake system: Yes Feed speed stepless up to: 3 - 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. jointing allowance: 10 mm Jointing rebate cutter on jointer: Yes Powered rollers in table: 1 unit Control system: PLC control Spindle readout: mechanical digital display Infeed rollers before jointer: Yes Air cushion table: three-strip Central lubrication point: Yes Description: short infeed table 1050 mm with internal lighting Location: Nattheim

Condition: used, Chipping roundwood: 100-150 m3/h Chipping small waste: 50-100 m3/h Lhedpfxshclffe Ag Rjp Weight: 3165 kg Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Lhsdpfx Ajudxchsg Rop Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: repair required (used), HYDRAULIC HOT PLATE PRESS, MODEL LS/L/R 30/13 SP. 150 mm Composition - LOADER - HYDRAULIC PRESS WITH HOT PLATENS, MODEL LS/L/R 30/13 SP. 150 mm - 3000x1300 mm HOT PLATE ROLLERS UNLOADER Press platen dimensions 3000x1300 mm. Lhjdpfxen R Dihe Ag Rop Press plungers No. 6 Ø 70 mm stroke 200 mm. Press platen thrust 70 t.

Condition: used, Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine will be cleaned and completely checked before delivery. Brief Summary: ----- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height Detailed Description: ----- Technical Specifications: Working width: 20-230 mm Working height: 10-120 mm Number of spindles: 5 1st spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool travel radius: 125-145 mm Tool travel radius for rebate cutter: 130-160 mm Axis adjustment range: 5 mm Rebate device MarathonCoatin for table insert in front of the 1st lower tool holder Electronic digital display for wheel adjustment 2nd spindle - Right ----- Motor with brake: 11.0 kW Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting radius 40 mm below table level: 93 - 200 mm Tool cutting radius 55 mm below table level: 93 - 180 mm Tool cutting radius for straight cutter heads max. 163 mm Max. tool diameter behind stop level: 180 mm Max. throat depth: 35 mm Axis adjustment range: 55 mm 3rd spindle - left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting radius 40 mm below table level: 93 - 200 mm Tool cutting radius 55 mm below table level: 93 - 180 mm Tool cutting circle for straight cutter heads max. 163 mm Max. throat depth: 35 mm Axial adjustment range: 55 mm Radial CNC-controlled spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle: 93 - 200 mm Tool cutting circle for straight cutter heads max.: 180 mm Max. throat depth: 35 mm Axial adjustment range: 40 mm Radial CNC-controlled spindle Split pressure shoe in front of the upper tool holder, adjustable to the tool cutting circle and pivoting away from the tool, spring-loaded. Pressure shoe before and discharge after the upper spindle with electronic digital displays, integrated into the memory function. 5th spindle - lower ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting radius: 93 - 200 mm Max. groove depth: 15 mm Axis adjustment range: 35 mm Feed system ----- Electronic feed, continuously adjustable with brake: 4 kW, 5 - 30 m/min Feed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth gauge and self-cleaning. Ljdpfxswzmu Re Ag Rehp Adjustment range of the feed rollers relative to the left tool holder, axial: 35 mm Machine electrical system ----- Operating voltage 400 V (voltage range 380 - 420 V), 50 Hz. All spindles are IE 2 version. Electrical design according to DIN VDE 0113, electrical equipment for industrial machines EN60204, IEC-204-1. Other electrical regulations are not taken into account. Machine stands, tables, and stops -----...