Parquet profiling machine 4+4

GMC

Condition: good (used), this machine dices meat and gives a hand cut appearance as it cuts without using pressure. Nedpfxet Hrrcj Ad Njcl

Year of construction: 1998, condition: good (used), I sell the multiple drilling machine with inserting KOCH Sprint-PTP Year: 1998 Number of drilling spindles 1 Number of inserting heads 1 Programming CNC-driven Z-axis Working width 1200mm Working height max. 36mm Available immediately Ncedpfx Asd Exwged Nel

Condition: used, mileage: 16,031 km, power: 68 kW (92.45 HP), first registration: 06/1944, fuel type: diesel, axle configuration: 6x6, wheelbase: 5,400 mm, fuel: diesel, gearing type: mechanical, suspension: steel, total length: 8,450 mm, total width: 2,230 mm, Year of construction: 1944, = Additional Options and Accessories = - Leaf spring suspension = Remarks = GMC CCKW 353 - 40.799 Stock No.: 40.799 [GENERAL INFO] Brand: GMC-MIDAS Model: CCKW 353 Drive Configuration: 6x6 Category: Flatbed Year of Manufacture: 1944 Mileage: 16,031 km Chassis Number: [ENGINE] Displacement: Number of Cylinders: 6 Power: [TRANSMISSION] Brand: Nedpfx Adoxr Nqyo Nocl Gearbox Type: Manual Number of Gears: [OPTIONS] Dutch/NL registration Perkins diesel engine (6 cylinders) 6x6 (drive shaft for front differential missing) [MORE INFORMATION?] = Further Information = General Information Cab type: Double cab Reference number: 40 Technical Information Number of cylinders: 6 Axle Configuration Suspension: Leaf springs Max. front axle load: 2,675 kg Rear axle 1: Max. axle load: 1,685 kg Rear axle 2: Max. axle load: 1,685 kg Weights Unladen weight: 4,020 kg Payload: 675 kg Gross vehicle weight (GVW): 4,695 kg Environment Emission class: Euro 0

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts the unique panel): - Minimum length of the workpiece: mm 500 - Maximum length of the workpiece: mm 2700 Ncsdpfx Adsu Tqb Uo Njl - Minimum width of the workpiece: mm 300 ca. - Maximum width of the workpiece: mm 700 - Thickness (min./max) of the workpiece: mm 10 / 30 ca. - Max feeding speed: m/min 50 - Total installed power Kw 43.2 Along with the following groups: POS. 1 Milling unit for execution of bottom slots/grooves (Kw 7,4) max. blade diameter mm 300 POS. 2 Lower scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 3 Upper scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 4 Lower main blade (sawing) unit (Kw 7.4) max. diameter mm 350

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Nodpfxou Su Huj Ad Necl Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ----- Machine will be renovated and functionally checked! Technical data summary (please inquire about any additional accessories included) ----- Generally ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically clocked up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: Glass bead saw pneumatically up and down Spindle description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glazing bead removal > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with program memory 99 programs > Machine operation: window package Joint control of the right spindle and the glazing bead removal via manual selector switch in the control panel > Spindles with mechanical digital display Option: used planer heads (technical data according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 2007, Glass tempering furnace GMC FOR GLASS INDUSTRY THF 150300S - Year: 2007 1500x3000 mm Nodpfx Adox Hxuto Necl 210x75 mm 2.8-19 mm 16380x5000 mm 400 V Control cabinet – 2 pcs Computer with monitor, mouse, keyboard Additional computer Roller table 3500x1550 mm – 2 pcs

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Condition: completely overhauled and refurbished Features and technical data: - Cutting area 4,200 x 2,100 x 50 mm - CE mark - Rear full enclosure - Scoring unit - Complete with extraction hood and saw blade - Control panel on saw carriage - Reinforced 4 kW motor - With strip cutting device - Folding stops and aluminium central support - Retractable slatted frame for horizontal cuts Dimensions: approx. 5,250 x 2,700 x 1,350 mm Weight: approx. 750 kg Njdewt E Uyopfx Ad Njcl Availability: short notice Location: Hesse

Year of construction: 2009, operating hours: 214 h, condition: like new (used), functionality: fully functional, Thin-Cutting Frame Saw DSG Sonic – Wintersteiger Model / Type: DSG Sonic Year of Manufacture: 2009 Condition: EXCELLENT, only 214 operating hours Technical Specifications 🔹 Cutting and Block Parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Stroke frequency: approx. 550 strokes/min Ncsdjw Dp Ufjpfx Ad Nsl - Cutting heights depending on saw length: - Saw length 380 mm: Cutting height 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) - Saw length 420 mm: Cutting height 30–128 mm, 45–128 mm - Saw length 500 mm: Cutting height 80–210 mm, 45–210 mm - Saw length 550 mm: Cutting height 80–254 mm, 45–254 mm - Block lengths: - Basic machine: +185 mm - With magazine: 250–1700 mm - With double planer: +250 mm - Block height variation: ±0.5 mm - Cutting width with side fence: 140 mm 🔹 Additional Technical Data: - Cutting width with center fence: 2 × up to 60 mm - Optional channel width: 2–4 × 15–60 mm - Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm - Kerf thickness (material loss): from 0.9 mm Blade lifespan (depending on wood): approx. 40 hours 🔩 Machine Weight: Basic unit: 3000 kg 🔉 Noise Levels (hearing protection required): At 1 m from the machine: - Idle: 97 dB(A) - Cutting: 99 dB(A) At the operator's workstation: - Idle: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and Compressed Air Requirements: Dust extraction: Two connections: Ø 120 mm and Ø 150 mm Capacity: 3200 m³/h (30 m/s) Compressed air: - Minimum pressure: 6 bar - Consumption: 200 l/min Lubrication: Centralized system with guide monitoring ⚡ Electrical Data: - Power supply: L1, L2, L3 + PE - Power cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Year of construction: 2003, condition: like new (used), I sell the vertical saw with scoring GMC KGS400E, year 2003, condition like new. Cutting range 4500x2100mm Motor 3kW. Cutting head tilting 0-90° Main saw blade 240-250mm / 5200rpm. With scoring unit 104-110 x 20mm / 7000rpm. Njdpfx Ajhfhcxsd Necl Manual cutting. Condition like new. Total weight 665kg. Available immediately.

Condition: not inspected (used), Year of construction: 1998, functionality: limited functionality, machine/vehicle number: 13189, VERTICAL PANEL SAW WITH ELECTRIC MOVEMENTS & DIGITAL DISPLAYS FOR CUTS Brand: GMC MACCHINE SRL Model Type: KGS 660S Serial No.: 13189 Year: 1998 (Photos taken prior to any potential refurbishment, machine offered as-is) MACHINING CAPACITIES: - Max. horizontal cutting length: 5300 mm - Max. horizontal cutting height: 2100 mm - Max. vertical cutting height: 2200 mm - Max. cutting depth: 80 mm OTHER FEATURES: - Power supply: 380V Three-phase+T - Installed power: 7.5 kW - Main motor power: 4.4 kW (6 hp) - Saw blade speed: 5,200 rpm Pneumatic blade feed - Carbide-tipped saw blade: Ø 300 mm, bore Ø 30 mm - Welded steel frame, PVC slat frame with automatic retraction via pneumatic cylinders - Fully lengthwise pneumatic retractable intermediate support with 2 adjustable and retractable stops - Retractable rollers for panel handling - Pneumatic locking of the saw carriage - 8 bar pneumatic feed - Digital display for cuts - Complete extraction system DPS Back cover spans the entire rear of the machine Lower longitudinal channel for sawdust collection Ncsdpfju R Ulhex Ad Nel Multiple extraction points in the lower section Extraction port: Ø100 mm - Support for floor-mounted installation - CE Marked Total space required when mounted on supports: 6300 x 1600 x 3040 mm (includes operator and maintenance area) Transport dimensions, 2 packages: . 1 frame 6300 x 860 x h.2620 mm . 1 pallet 3150 x 1000 x 1000 mm Total weight: 1250 kg Please contact us for supply of consumables, accessories, and/or extraction systems. Offered as a lot, without refurbishment or warranty. Ex works price, excluding VAT. Transport and services on request.

Condition: good (used), Drying oven for uv line Njdpfx Ast Ag Uqod Nscl

Condition: excellent (used), Year of construction: 1993, Technical data: Manufacturer : Striebig Year : 9.93 Type : Standard ll Plus 5220A Feed : manual Version : automatically deflecting aluminum slatted frame Saw carriage lock : manual Immersion saw unit : manual Swivel adjustment 0 to 90° : manual Motor power : 4,4 kW Cutting area : 4600 × 2200× 60 mm Speed : 5250 rpm Saw blade diameter : 300 mm Space requirement : L × H × W 5700×3000×1400 Condition : very good Location : Warehouse Ncodsiwlz Aepfx Ad Njl Saw blade : 1 pc Can be loaded on site with forklift. Delivery and assembly possible by arrangement.

Condition: reconditioned (used), cutting dimensions 4200 mm x 2200 mm Blade diameter 250 mm Nodew Ug Aaspfx Ad Necl cutting thickness 60 mm

Condition: not inspected (used), Year of construction: 1984, 1 milling unit 2.8/3.5 kW nominal current 6,4/9,3 A workpiece thickness max. 130 mm Lateral table for routing work Nodpfxsga Tu Ds Ad Nocl

Condition: like new (used), functionality: fully functional, Year of construction: 2020, LC tray degassing chamber 2. Degassing chamber: 1. Vacuum profile; 1.1. Pressure set points adjustable between 1.103 and 1.10-3mBar 1.1.1. Measurement range: 1.103 – 5.10-4 Ncedpfjwliryox Ad Njl 1.2. Time set points adjustable between 1 and 600min per step 1.2.1. Degassing step (D) can be minutes to days 1.3. Evacuation and ventilation rates must be controllable 1.4. The evacuation cycle (A – D) is performed automatically 1.4.1. The vent step (E) must be activated manually (operator) 1.5. Typical degassing profile