Hammermill

CPM Champion 30x54

Condition: good (used), Bale-Pak for pressing shavings in good condition including a scraper conveyor, an ABB stacking robot and an automatic plastic wrapper Kdedpeimv N Tefx Ah Nog

Condition: new, Year of construction: 2023, Standby power 20 kVA (16 kW) Full load 17.5kVA (14kW) Voltage 230/400V Generator power 16 kW Kdsdoi Nthqjpfx Ah Njg Generator continuous power 14 kW Number of phases 3 ECU adjustment Fuel tank capacity 60 l Liquid cooling Frequency 50Hz Rotation speed 1500 rpm. Engine type in-line, 4-cylinder, naturally aspirated Cylinder diameter and length 98 x 105 mm Engine capacity 3.2 liters Capacity oil approx. 3 l (between the min./max. value on the dipstick) Capacity coolant approx. 5 l diesel fuel Compression ratio 17.2:1 DATAKOM D300 control panel Insulation class (alternator) H Number of windings (alternator) 12 IP degree of protection (alternator) IP23 Shunt excitation type Voltage (alternator) +/- 1% Overall dimensions (length x width x height) 2000 x 900 x 1070 mm EURO III emission standard Weight 730 kg

Condition: new, Year of construction: 2024, Chopper Knife Kodpfxebxu Dhe Ah Nedg 40 x 40 concave Knife for Weima, Large ..... For almost all common chippers / shredders From stock Bitburg Subject to prior sale

Condition: new, Year of construction: 2022, Working width: 630 mm Planing height: 300 mm Planing shaft: Tersa Number of knives: 4 Height adjustment: electric display planing thickness: digital display Feed speed: infinitely variable 5 - 22 m/min Feed roller: steel pressure beam: jointed Extraction roller: Rubber 2 x Ksdpfx Ahol D Rxfs Nodg table rollers: no engine power: 9,2 kW suction connection: 160mm Machine length: 1200mm Machine width: 1200mm Weight: 1000kg

Year of construction: 2015, condition: reconditioned (used), Technical data Feed hopper with hydraulic moving floor and bag opener: Manufacturer BRT HARTNER GmbH Type HP5-3035 Kodpfxju R Rtbj Ah Nedg Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high. Comments: The machine is currently being overhauled in our workshop. The photos show the machine in the current overhaul phase, so the system has not yet been fully reassembled. Once the overhaul work has been completed, probably in February 2025, the machine will be tested in operation without the use of materials. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 1989, Shredder +press +conveyor belt+silo complete Kedpfjr Dvdksx Ah Njdg

Condition: used, Steel construction for crane system Width: approx. 8,3 m Kodpfxjbruzbe Ah Nsdg Length: approx. 5.1 m Plant dismantled The plant is sold "as is". Viewing: You are cordially invited to view the item - simply contact us and arrange an appointment at short notice. Attention: no guarantee, no exchange, no redemption possible.

Condition: new, Main features of the machine: Thicknesser TH 630 is a simple, solid construction intended for everyday work in the workshop, with a planer shaft width of 630 mm. It is characterized by a large massive ribbed cast iron table, which eliminates any vibrations during operation. The machine has an extremely powerful motor that drives the cutter heads (notched knives), which make the process of planing the most difficult wooden elements an easy task. Each knife is easy to replace if worn or damaged. Moving the table up and down is automatic after entering the appropriate dimensions. The sum of these many advantages gives the possibility of very precise machining settings. Advantages: Worktable mounted on 4 bolts Kedpogpg E Sofx Ah Nodg Controller for automatic table height adjustment Planer shaft by 120, 4 knives The possibility of cutting large dimensions Technical data: Max planing width: 630 mm Max planing height: 300 mm Min length of the planed element: 280 mm Knife shaft diameter: 120 mm 2 rolls in the table top Number of knives: 4 The dimensions of the knives: 630x30x3 mm Power supply: 400V Total power: 7.5 kW Smooth feed speed: from 4-20 mm / min Electric Lifting Extraction port: 150 mm Weight: 890 kg Table dimensions: 1050x630 mm Milling block speed: 5500 rpm The machine is available immediately! Machine dimensions Length: 1060 mm Width: 1060 mm Height: 1160 mm

Condition: new, Year of construction: 2025, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Kdodpfouxuv Aox Ah Neg

Condition: used, CPM 9042-12 granulator with many spare parts Kedsw Saayjpfx Ah Nsdg