Wood shredder

Vecoplan + Spänex VAZ 145/135

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? Ncsdpfx Aovgrh Uohvon We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: used, Year of construction: 2012, power: 264 kW (358.94 HP), Stationary shredder M&J 4000S. Electric drive: 2x 132 kW 400 V AC, 50 Hz Incl. substructure Incl. hydraulic unit, control cabinet inside of the container Ncsdsu Dkf Dspfx Ahvjn

Condition: refurbished (used), Complete Cutting Machine Group from LINCK: 1.Pre-cut feed table Linck EV20 (condition:good) 2.Chipper canter LinckV18 (condition: good) Ncodpfx Aorvh Tmjhvsn 5.Boad separator unit Linck SE (condition: refurbished) 1. EV20- Pre-cut feed table Linck EV20 for smaller logs. Hydraulic unit is included. 2. Chipper canter LinckV18. 2x85 KW motor with direct drive. Completely refurbished set. We can also offer full electrical installation and assembly of line on site.

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) Nedpjcggy Sefx Ahvjcn - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: good (used), functionality: unexamined, overall weight: 80 kg, total width: 990 mm, total height: 870 mm, total length: 1,180 mm, stack height: 800 mm, tank capacity: 900 l, empty load weight: 80 kg, We hereby offer you, without obligation, around 200 used steel stacking boxes and storage containers made of galvanized steel sheet. Manufacturer: unknown Dimensions of the stacking box (overall): 1180 x 990 x 870 mm (L x W x H) Njdpfsvtckmex Ahvocn Stacking height: 800 mm Internal box height: 700 mm Box volume: approx. 0.9 m³ Weight: approx. 80 kg/unit Note: The steel stacking boxes were used by the previous owner on construction sites as containers for sorted construction waste. Emptying into larger transfer containers was carried out using a forklift with a rotating fork. For this reason, the stackable containers are manufactured with extra thick-walled construction. Sale takes place without obligation, excluding warranty and guarantee, to commercial customers only. We would be pleased if the steel stacking containers are of interest to you. Your service team, Mertens & Frowein GmbH

Condition: used, Year of construction: 1988, operating hours: 1 h, machine/vehicle number: V 516, total width: 2,000 mm, total length: 7,000 mm, total height: 1,800 mm, operating pressure: 300 bar, pressing force: 90 t, sheet thickness aluminum (max.): 5 mm, power: 11 kW (14.96 HP), empty load weight: 16,000 kg, cutting force: 90 t, year of last overhaul: 2025, Bale size 400x400 mm Force 1 Step 900 KN Force 2 Step 900 KN Steel max. 2500-3500 Kg/Std. Ncsdpfxelhqd Re Ahvon Aluminium max. 2000 - 3000 Kg/Std. Driving Power 11 KW Arrangement Surface 7x2x2,5 m x m Machine weight 16 to Place: Austria Aviable: 30.01.2025

Condition: not inspected (used), Double knee jaw crusher Model: RB 1200/900 Feed opening: 1,200 x 900 mm Nsdpfx Ahor Nvk Isvscn

Condition: new, Year of construction: 2024, Chopper Knife 40 x 40 concave Knife for Weima, Large ..... For almost all common chippers / shredders From stock Bitburg Nsdpfxjbxu Dhe Ahvscn Subject to prior sale

Condition: used, Intake opening: 1.200 x 1.600 mm Motor power: 110 kW, without gearbox Nedsbq Stqopfx Ahvocn Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5.900 kg

Condition: good (used), The debarker is great for debarking hardwood as well as softwood. Carriage made of heavy steel construction 5 pairs of drive wheels Milling arm made of heavy steel construction Hydraulic milling head 22 kW motor Ncedpjtuyr Iefx Ahvjn Log feeder shown in the picture is not part of the ad and is available for an extra charge of 25,000 PLN / 5,500 EUR