Press brake

BAYKAL APHS-C 125040

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Hjdev Tk Exjpfx Aahjp Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l

Condition: excellent (used), Year of construction: 2008, x-travel 630 mm y-travel 560 mm z-travel 560 mm Control MillPlus HEIDENHAIN table dimension - longitudinal 1000 mm Hodpfjvwgp Uex Aahsp table dimension - cross 600 mm spindle turning speed range 12000 U/min Number of axles 4 St. rapid traverse 30 m/min tool change unit 24 -fach weight of the machine ca. 9 t The DMU 60 monoBlock is in very good condition and immediately available. Accessories: - Measuring probe

Condition: used, Year of construction: 1990, I - beam section - flat steel 140 x 140 x 13 mm I-beam section - upend 120 x 120 x 13 mm L-beam 130 x 130 x 12 mm round bar steel 85 mm Hjdstt Ecdjpfx Aahjp bending capacity - flat iron 125 25 mm flat steel 65 x 65 mm including various rollers: Pipe Ø: 219 mm (tool/roller Ø 535 mm) 140 mm (tool/roller Ø 420 mm) 273 mm (tool/roller Ø 520 mm) 203mm 168.3 mm (tool/roller Ø 500 mm) 75 mm (tool/roller Ø 400 mm) 49 mm (tool/roller Ø 420 mm) 48.3 mm (tool/roller Ø 420 mm) 22.5 mm (tool/roller Ø 420 mm) 32/32.5 mm (tool/roller Ø 420 mm) 60 mm (tool/roller Ø 420 mm)

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 15,996 h, input voltage: 400 V, overall weight: 6,750 kg, 1000 KN Hodpfxjtwliws Aahep Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Hsdpsw Ty S Ssfx Aahjp Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm - BT-40 - Automatic tool changer (24 positions) - Remote service (IXON) + network connection - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm Hodpfxsfx Hv Hs Aahop ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm Hjdpfx Aov Tpxqjahep -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Condition: new, - Capacity: 700 x 2 mm - Conical rollers - Removable top roller Hsdpsihv Hpofx Aahjp - Foot control - Emergency stop - Documentation - 400V

Condition: used, material width 300 mm coil weight 3 t material thickness 2 - 4 mm Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm Hsdpscdrmmefx Aahjp - cross cut 1200 mm² - voltage 220/380 V 50 Hz - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm - voltage 220/380 V 50 Hz - total power requirement 3,92 kW without control

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor Hsdjyzza Iopfx Aahop CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis A 6th axis MAPAL Tooltronic U-axis system comes with the machine with two heads: 1. LAT125-HSK100 2. LAT160-HSK100 *