Year of construction: 1987, Condition: ready for operation (used), Max. coil weight: 10t, controls: SIEMENS S5, without documentation. Dksb Et Segwg Udjw Ejl

Year of construction: 1962, Condition: good (used), machine/vehicle number: 364, max. pressure at 4,2 l/min: 550 - 570 bar capacity approx.: 30 l hydraulic motor: 220/380 V, 1400 rpm, 4 kW straight cutter, type GS 22 cutting range at 140 kg strength: 6 - 12 mm Ø cutting rate approx.: 8 - 12 /min Straightening machine, type RK 26 for straightening of strip steel and round material with a strength of: 26 - 50 kg Dsb Eob Nuuget Sw Eokl weight approx.: 10 kg space requirement: 1200 x 900 x 850 mm Total weight approx.: 130 kg

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, Lattice girder cutting system with lifting lift and storage system Make Progress, type GTA 91/S, built in 2008 Consisting of: Deb Etjvxgbmo Sw Ejkl hydraulic lattice girder shears with measuring table length 8 m and lattice girder buffer Storage system with 14 compartments (2 opposing vertical lattice girder rack storage) and double-sided lifting lift 1 control cabinet, 1 control panel with screen, manuals System can be inspected during operation at our factory Dismantling by buyer required from the end of 2025

Year of construction: 1999, Condition: good (used), Very nice high 10-t speed Japanese press with fixed stroke of 15 mm, rates from 0 to 2500 strokes per minute Dkob Etoim Iv Ds Sw Ejl

Condition: refurbished (used), Functionality: fully functional, working width: 1,200 mm, welding power (max.): 100 kVA, Schlatter MG900, 1200mm wide, updated control with Siemens S7-300 PLC from 2016. Mechanically completely rebuilt and all new control cables Dkebjvvf T Ao Et Sw Ejl

Condition: ready for operation (used), Year of construction: 1971, laoding capacity: max. 250 Kg. Dkeb Et Sodx Rzmjw Ejl coil diameter: max. 650 kg. strip metal width: max. 100 mm

Year of construction: 2002, Condition: ready for operation (used), Max. speed: 360m/min, power: 5.6kW. Dkeb Eegq Ux Net Sw Ejl

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, Wire straightening, cutting and laying machine with crimping device Make Progress, type MSR16, built in 1999 Consists of: Straightening machine (5 rotors: d 6-14 mm), cutting and laying unit 5 electrically driven and braked reels, including substructure. Outlet 2BK/e length 9 m with crimping device and chain magazine for rear ejection Pair of cross-transfer units for pallet movement 1 control cabinet, 1 control panel with screen, manuals Dkjb Eevxf Sdot Sw Eol System can be inspected during operation at our factory Dismantling by buyer required from 01/07/2025

Condition: excellent (used), Year of construction: 2004, loading capacity: max. 1.500 Kg. Dkjb Eoipv R Tet Sw Esl wire diameter range: 2,0 - 8,0 mm table diameter: 1.100 mm

Year of construction: 2013, Condition: ready for operation (used), Also suitable for processing flat steel, including documentation, without accessories, machine was scarcely used. Deb Et Swshhnyfo Eekl

Condition: good (used), Year of construction: 1990, loading capacity: 2.000 Kg. diameter of decoiler: 1.400 mm outside diameter of coil: max. 1.300 mm Deb Et Sjid Sgmow Eskl inside diameter of coil: min. 400 mm hight of the coil: max. 800 mm

Year of construction: 1997, Condition: ready for operation (used), Wire range: 3-6mm, speed: 60-80/min, max. coil weight: 1t. Dob Etjimbuvj Sw Eskl

Condition: excellent (used), Year of construction: 1984, Functionality: fully functional, Loading capacity: max. 300 Kg. Diameter of decoiler: 1.000 mm Diameter of spool: max. 900 mm Inside diam of spool: 240 - 560 mm Dkob Etjf S I I Ho Sw Eel Hight of spool: max. 180 mm

Year of construction: 2016, Condition: ready for operation (used), Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes. Dob Etjn R Nhqj Sw Eekl

Condition: used, Year of construction: 1984, Functionality: fully functional, Wire thickness range: 2.0 - 10.0 mm Feed speed: 7 - 10 mtr/min Djb Et Seqy A I Ejw Eekl

Year of construction: 1993, Condition: ready for operation (used), Number of spooling positions: 2x 6, number of take-off pulley drives: 1 group drive, number of layings: 1 group laying, wire diameter: 0.15-0.3mm, bore diameter 22mm, winding speed: 20-120/min, max. winding strength: 78.5MPA, connected load: 4.5kW, material: stainless steel and brass, spool range: K160 to K250 acc. to DIN 46399, with group drive of take-off pulleys for all spooling positions and group laying for all spooling positions for conventional flanged spools. Dob Et Swen I T Tge Eekl

Condition: excellent (used), Year of construction: 2004, BIHLER Control System P-CNC 400 for BIHLER MC 42 consist of: Control cabinet complete with SIEMENS SIMODRIVE Operator panel T 1 BIHLER P-CNC 400 Deb Esikiwkst Sw Eokl Operator panel T 2 BIHLER P-CNC 400

Year of construction: 1998, Condition: ready for operation (used), Number of coil carriers: 12, rotor speed: 450/min, coil volume: 550cm³, wire tension: 1-16N, pitch: 5-90mm, connected load: 5kVA, with documentation, is already dismantled. Dkeb Etopgycio Sw Eel

Condition: excellent (used), Year of construction: 1987, Loading capacity: max. 100 Kg. outside diameter of the rolls: max. 600 mm inside diamter of the rolls: min. 200 mm Dkob Et Swefgd S Ss Ejl

Year of construction: 1981, Condition: ready for operation (used), Including documentation. Dsbei Athvj Et Sw Eokl

Condition: ready for operation (used), Year of construction: 1979, welding capacity: max. 70 kVA Debedzudze Et Sw Eokl

Year of construction: 1995, Condition: ready for operation (used), Two Wenzke rewinders are available. 1) Wenzke PM 1000/DC-S (heavy version), max. outside diameter: 2800mm, inside diameter: 800mm, winding width: 700mm, max. pipe diameter: 75mm PE, year of manufacture: 1995. 2) Wenzke PMS 500, max. outside diameter: 2800mm, inside diameter: 800mm, winding width: 700mm, max. pipe diameter: 75mm PE, year of manufacture: 1988. Documentation partially available. On-site inspection is possible. Individual sale possible. Dkeboun St Ne Et Sw Eol

Condition: excellent (used), Year of construction: 1967, Equippment: 1 Gripper feeding system right hand side Dksb Et Swspq H Upj Eol 1 Eccentricpress 90 kN 2 Narrow-slide-units 3 Standard-slide-units Working range: Wire diameter range: 0,5 - 3,5 mm Stripmetal width: max. 32 mm Feeding length: max. 170 mm Output: max. 250/min.

Year of construction: 1995, Condition: ready for operation (used), A defective CNC spring coiling machine BB Spring (Babbio) is available. Wire thickness range: 3mm-8mm, max. outer diameter: 120mm, wire processing speed: 90m/min, power: 35kW, machine dimensions X/Y/Z: approx. 2750mm/3150mm/2700mm, weight: approx. 4000kg. Including a winch plate for winching left springs and a scenker spring device. The motor and drive of the machine are defective. Documentation available. Djb Esvripmet Sw Eokl

Condition: ready for operation (used), Year of construction: 1983, There are one Somavis T-8K and one T-8L available, max. working diameter: 6mm, max. shaft length machine 1/ 2: 80/ 100mm, output: 200-600/min. Dobeqwi Iuj Et Sw Eskl