Condition: new, As a machine dealer in Offenburg, we offer premium welding machines from Rehm. Many machines are immediately available from stock. We are also happy to advise you with regard to individual wishes and requirements. Give us a call. Technical data: Setting range [A]: 35-300 Duty cycle (ED) at I-max. [%]: 40 Welding current at 100 % duty cycle [A]: 210 Open circuit voltage [V]: 17-40 Switching stages: 12 Wire feed [Ø mm] : 1.0 Fuse protection (slow) [A]: 32 Torch cooling: Gas Protection class: IP 21 Mains voltage [V]: 3 x 400 Control socket [pol.]: without Welding cable socket [mm]: 13 Weight [kg] : approx. 78 Dimensions L x W x H [mm]: 800 x 330 x 620 Cgolswbpr Seq St H Hjt Possible accessories: Hand burner earth cable Pressure reducer Coil adapter Welding rod Available immediately. For collection by the customer. Forklift available. Shipping is also possible.

Condition: used, Functionality: fully functional, Oerlikon DTW331 TIG welder Welding machine as shown. Celjwdmxneq St H Hjgt

Condition: as good as new (ex-display), Year of construction: 2025, SRF master figure left 2 m suction arm Scope of application Cgolqedqzbro St H Hot Low smoke and dust Sporadic usage Use Little run the extractor hood required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg

Condition: used, No. 10015 Plasma cutter Jäckle CUTTER 150 Used Air-cooled, step-switched CUTTER-series for “hard work” According to our customer, the machine is fully functional and can be tested during an on-site viewing 2 cutting steps Plasma gas: compressed air HF-ignition Connection for plasma torch: central Thermal overload protection Very robust and reliable design Clear and service-friendly design Suitable for gouging Supply voltage 400 V, 50 Hz Fuse (slow) 62 A Power draw 43 kVA Setting range 75 / 150 A Open circuit voltage 350 V Duty cycle 40°C / 70% 150 A - 140 V / 100% 75 A - 110 V Quality cut 35 mm Severance cut 45 mm System of protection IP 22 Insulation class H (180°C) System of cooling F Compressed-air supply 5.5 bar / 230 l/min Transport dimensions approx. 1200 x 800 x 1000 mm LWH Weight approx. 165 kg Celq St Hswbkcfs Hsgt Sale on behalf of customer, ex location near 85221 Dachau, without disassembly, without transport and assembly Errors in description and price excepted Disassembly, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 212945 € 3884.84 € 6 kW Wechseltisch 25 mm 15 mm 20 mm 10 mm 12 mm 28,5 kW 3060 x 1525 mm 3060 mm 1525 mm 125 (275) mm 3084 x 1524 mm 240 kg/m² 2160 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 25 s FIBER LASER HESSE HD-FN MADE BY DURMA The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium DRM-8 F150 Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Cgolq Stovnv Ins H Hst Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Equipped according to CE guidelines OPTION: Extraction with filter unit

Condition: good (used), – Power 25 kVA – Pneumatic – 400 V Celjwdkmcsq St H Hegt

Condition: new, As a machine dealer in Offenburg, we offer premium welding machines from Rehm. Many machines are immediately available from stock. We are also happy to advise you with regard to individual wishes and requirements. Give us a call. Technical data Model: 280 AC/DC Setting range Cgslq Stswbpr Ej H Hst TIG [A]: 3-280 Electrode (BOOSTER) [A]: 3-280 Duty cycle (ED) at Imax. (10 min.) TIG [%]: 100 Electrode (booster) [%]: 60 Welding current at 100 % duty cycle at 40°C TIG [A]: 280 Electrode (booster) [A]: 260 Fuse protection (slow) [A]: 16 Torch cooling: Water Protection class: IP 23 Power factor [cos phi]: 0.96 Power consumption at Imax. [kVA]: 11.9 Mains voltage [V]: 3 x 400 Mains frequency [HZ]: 50 Control socket [pol.]: 12 Welding cable socket [mm]: 13 Weight [kg]: 27 Dimension [mm]: 520 x 360 x 460 Possible accessories: Hand burner earth cable Pressure reducer Available immediately. For collection by the customer. Forklift available. Shipping is also possible.

Condition: like new (used), Year of construction: 2025, operating hours: 10 h, Functionality: fully functional, type of input current: AC, arm reach: 1,430 mm, Robot Laser Welding Machine *6 axis robot arm *Arm span 1430mm Colq Sowbylcjt H Hegt *Bearing weight 12kg *Laser power 2000w *Welding thickness 5mm

Condition: as good as new (ex-display), Year of construction: 2025, SRF Maxi. (Picture on the right) Cgolq St Hsdqzcvs Hst 3 m suction arm Scope of application Medium smoke and dust Regular usage Use Little run the extractor hood required Contamination free filter change Safe operation due to phase sequence detection High efficiency due to long Service life of the filter Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Automatic start/stop system (optional) Workplace lighting (optional) Technical data Procedure 2-speed Filter type disposable filter Filter surface approx. 20 m ² ᐳ 99% filtration efficiency Filter material of non-woven polyester Welding smoke off vagina class W3 Additional filter pre-filter (ALU knitted fabric) Basic data suction capacity Max 1,100 m³/h Extraction arm diameter Ø 150 mm Extraction arm, length 3 m Diameter suction connection Ø 150 mm -. Power supply 3 x 400 V / 50 Hz Motor 1,1 kW Noise level 70 dB(A) Dimensions (W x D x H) 790 x 815 x 1080 mm Weight 71 kg approx. 120 kg

Condition: used, Year of construction: 2015, operating hours: 19,120 h, laser power: 2,000 W, sheet thickness aluminum (max.): 5 mm, sheet thickness steel (max.): 12 mm, sheet thickness copper (max.): 2 mm, feed length X-axis: 3,078 mm, feed length Y-axis: 1,550 mm, cutting speed: 40,000 mm/min, We market in the context of a business liquidation : Make : TRUMPF Type : TruLaser 1030 ( L 46 ) Year of manufacture : 2015 Operating hours : 19.120 h X - axis = 3.078 mm Y-axis = 1.550 mm Z-axis = 76 mm Cutting speed max.: 40 m/min Laser : Type : TruDisk 2001 Fiber ( FD 24 ) max. power: 2000 W Material thickness max: - Mild steel = 12 mm - Stainless steel = 6 mm - Aluminum = 5 mm - Bronze = 3 mm - Copper = 2 mm Equipment : Cgjlq Sewdilqst H Hot - Table can be pulled out manually - Suction unit compactly integrated - Original transport device Dimensions basic machine approx: L 7.9 m x W 2.70 m x H 2.30 m, Weight approx.: 8,800 kg

Year of construction: 1996, Condition: used, Spot welding machine Tecna type 4602 16 KVA bewi 50 % ED Cgelsgt Axmoq St H Hjt

Condition: good (used), – Nominal power 20 kVA – Maximum power 48 kVA – Pneumatic – Digital control TE 90 MARK II – Projection 540 mm Cgolq St Hovw Eiae Hst – Documentation – 400V

Condition: new, Mains voltage / mains connection 230 V Fuse protection 16 A Frequency 50/60 kHz Power factor 0.99 Cosphi Duty cycle at Imax. 40°C 35 % Setting range TIG 4-230 A Power consumption 5.8 kVA Weight 7.9 kg Mains voltage / mains connection 230 V Fuse protection 16 A Setting range TIG 4-230 A Digital operation of the device Scope of delivery: - Tiger 230 AC/DC Ultra digital NEW - Abicor Binzel Abitig 26 4m U/D hose package NEW - Pressure reducer NEW - Dimension cable 5m Cgelq St Hswbprxo Hst

Condition: like new (used), Year of construction: 2018, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20RD.(Payload: 20kg, H-Reach: 2017mm, Robot Mass: 293kg, 2010.04) 1 x YASKAWA DX100 controller.(2010.05). 1 x IPG YLS-4000.(2017). Cgelq Seh Ad E Ujt H Hot 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD(S.N.:BIMO2W17013). Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: new, Year of construction: 2025, Functionality: fully functional, laser power: 30,000 W, working range: 13,000 mm, total length: 16,800 mm, total height: 5,120 mm, total width: 2,200 mm, workpiece weight (max.): 20,000 kg, positioning accuracy: 0.03 mm, warranty duration: 24 months, input frequency: 50 Hz, repeat accuracy: 0.02 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 13,050 mm, travel distance Z-axis: 450 mm, Equipment: cooling unit, safety light barrier, GS-L Series, Glorystar Single Table Gantry Type Metal Laser Cutting Machine Laser Power: 12000-8000W The GS-L Series is a high-power metal laser cutting machine with a gantry-type segmented bed design. It can be freely customized to meet processing format requirements according to customer needs. Key Features: ● Super Large Processing Format with a gantry-style segmented design. ● The GS-L Series has the largest Z-axis travel and height in its class in the industry. Supports extreme thickness cutting for plates over 20mm. Capable of cutting ultra-thick plates up to 70mm. ● High Negative Pressure Automatic Partition Dust Removal ● Equipped with a high-air-volume fan for effective dust removal. Technical parameters: Working area (mm): 13000mm*3000mm（bevel cut: 12500mm*2500mm） X axis travel distance (mm): 3050mm Celq Stjvmwn Hs H Hjgt Y axis travel distance (mm): 13050mm Z axis travel distance (mm): 450mm X/Y axis positioning accuracy: ≤0.03mm/m X/Y axis repeat positioning accuracy: ≤±0.02mm Max. synthetic positioning speed: 110m/min Max. acceleration: 1.2G Min. setting unit: 0.001mm Floor size (mm): 18500mm*6500mm Main body dimension (mm): 16800mm*5120mm*2200mm Worktable max. weight capacity (T): 20 tons (even load bearing)

Year of construction: 2000, Condition: used, TIG welder direct current 380 Volt for stainless steel Arkoquad 220 40 % ED at 220 AH 10 % ED at 140 AH with torch Celogt Auusq St H Hegt Ground cable Pressure reducer Water cooling

Condition: new, As a REHM specialist dealer, we now have the opportunity for customers in Offenburg and the surrounding area to receive up to 40% subsidy from the state when purchasing a new MIG/MAG PULS welding machine. Our welding expert and REHM specialist will be happy to advise you and looks forward to your inquiries. REHM MIG/MAG welding machine FOCUS.ARC P REDUCES CO2 AND BRINGS MONEY FROM THE STATE WHO SUPPORTS? The Federal Office of Economics and Export Control (BAFA) supports investment measures to optimize the energy efficiency of systems and processes. WHAT IS SUPPORTED? Investments that demonstrably lead to energy savings and thus to a reduction in CO2 emissions can be subsidized. For example, if you want to replace step-switched welding machines with high energy consumption with efficient REHM welding technology, you can take advantage of the Module 4 subsidy. The costs for drawing up the energy-saving concept and implementation support from an external energy consultant are also eligible for funding. The amortization period for the entire measure must be more than 2 years. HOW MUCH FUNDING IS AVAILABLE? Up to: - 40 % of the costs - 900 € per t CO2 - 10 million € BAFA supports large companies with up to 30% (maximum €500 per tonne of ton of CO2 saved) and small and medium-sized companies with up to 40% (maximum €900 per ton of ton of CO2 saved) of the eligible costs. The maximum funding amounts to 10 million per investment project. WHO IS ELIGIBLE FOR FUNDING? Private and municipal companies with a permanent establishment or branch in Germany are eligible to apply. The planned measures must be carried out on the territory of the Federal Republic of Germany. A BAFA-approved energy consultant must be commissioned to draw up the obligatory energy-saving concept. HOW DO YOU APPLY FOR FUNDING? 01. list: Make a list of all appliances that are to be replaced and all appliances that are to be purchased. 02. check: We take the necessary data from you and check your funding amount provisionally. At the same time, we prepare a quotation for the new welding equipment. 03. energy consultant: We prepare all the data for you and pass it on to an energy consultant who works with us. This saves you time and money. 04. application: After checking the data, the energy consultant submits the application for funding on your behalf. 05. processing time: If it is urgent, we can speed up the processing of the application for you. for you. This reduces the processing time to approx. 10 to 15 days. The following MIG/MAG PULS welding machines from REHM are eligible for BAFA funding: Without wire feed case: FOCUS.ARC P 250 0.8/1.0mm FOCUS.ARC P 250 W 0.8/1.0mm FOCUS.ARC P 300 1.0/1.2mm FOCUS.ARC P 300 W 1.0/1.2mm FOCUS.ARC P 350 1.0/1.2mm FOCUS.ARC P 350 W 1.0/1.2mm FOCUS.ARC P 400 1.0/1.2mm FOCUS.ARC P 400 W 1.0/1.2mm Cslq St Hewbprls Hogt FOCUS.ARC P 450 1.0/1.2mm FOCUS.ARC P 450 W 1.0/1.2mm With wire feed case: FOCUS.ARC P 250 S 0.8/1.0mm FOCUS.ARC P 250 WS 0.8/1.0mm FOCUS.ARC P 300 S 1.0/1.2mm FOCUS.ARC P 300 WS 1.0/1.2mm FOCUS.ARC P 350 S 1.0/1.2mm FOCUS.ARC P 350 WS 1.0/1.2mm FOCUS.ARC P 400 S 1.0/1.2mm FOCUS.ARC P 400 WS 1.0/1.2mm FOCUS.ARC P 450 S 1.0/1.2mm FOCUS.ARC P 450 WS 1.0/1.2mm Our welding expert and REHM specialist will be happy to advise you and looks forward to your inquiries.

Condition: used, Dalex Works Pms 10-2 380V 50Hz rated power at 50 duty cycle: 63 kVA secondary short circuit current: 45 kA rated primary voltage 380 V - 50 Hz open circuit voltage of 5,6 V electrode force: 65-390 daN Machine weight 341 kg Cgelqeg Rcpxs St H Hot

Condition: new, As a machine dealer in Offenburg, we also have welding machines from Rehm in our program. You can get an overview of the machines on our website. If you have any questions, just give us a call. MIG MAG welding machine REHM FOCUS.ARC 300 Manufacturer: REHM Type: FOCUS.ARC 300 Scope of delivery: - Hose package Abicor Binzel 401 4m - Dimension cable 50mm 5m - Pressure reducer - Basket coil adapter Available immediately. For collection by the customer. Forklift available. Shipping also possible Errors, changes and prior sale reserved. Cslq St Hewbprfo Hjgt Not the right machine? Then visit our website.

Condition: good (used), Year of construction: 2010, MIG MAG inert gas welding machine Esseti Query 500 c with removable wire feed case 60 % 500 AH 100 % 380 AH Torch MB 501 4 meter incl. pressure reducer Cgelqjt Iq Eds St H Het

Condition: used, MIG MAg welding machine Unistep 320 with removable wire feed case with torch MB 401 incl. pressure reducer Cgslqot Iq E Rs St H Hjt

Condition: good (used), Year of construction: 2003, machine/vehicle number: 18220203, System for automated robot welding Mains voltage:3 x 400 V Mains voltage tolerance:+ /- 15 Mains frequency:50 / 60 Hz Mains fuse protection:35 A slow-blow Primary continuous current:18 - 29.5 A - 100 duty cycle Primary continuous power:13.1 kVA Power factor:0.99 Efficiency:0.9 Welding current range:MIG/MAG: 3-500 A Rod Electrode: 10-500 A TIG: 3-500 A Welding current:40 duty cycle: 500 A 60 duty cycle: 450 A 100 duty cycle: 360 A Welding voltage range:MIG/MAG: 14.2 - 39.0 V Rod electrode: 20.4 - 40.0 V TIG: 10.1 - 30.0 V Max. Welding voltage:49.2 V Open circuit voltage (OCV):70 V Dimensions (mm) H x W x D:626 x 287 x 477 mm Weights:35.6 kg Included in the scope of delivery: Power source on steel platform (RS 422 interface) Cooling unit (FK 4000-R) Fronius VR 1500 4R/W/E robot wire feed case Supply voltage 55 V DC Rated current 4 A Wire diameter 0.8 - 1.6 mm 0.03 - 0.06 in. Wire speed 0.5 - 22 m/min 19.69 - 866.14 ipm. Torque 4 Nm Protection class IP 21 Dimensions I x w x h 405 x 208 x 205 mm 15.94 x 8.19 x 8.07 in. Weight 7 kg 15.43 Ib. Celq Seqpgntot H Hsgt Drive 4 roller drive Maximum shielding gas pressure 7 bar 101 psi. Coolant Original Fronius coolant Maximum coolant pressure 6 bar 87 psi. Welding torch Robacta Drive W/E/6.25m Hose package 6.5m Various wearing parts (e.g. pipe bends, gas nozzle, contact pieces) Suction unit with hose guide

Year of construction: 1970, Condition: used, Spot welding machine Make Dalex type SF 16 Celq St Hsk Tt Hfj Hegt Continuous power 16 KVA at 50 % ED

Year of construction: 2008, Condition: good (used), Central extraction for flame cutting machines Plasma tables MICROCOMP VC 1132.08.28 see pictures Cgjlq Seugwakjt H Hjt

Condition: good (used), Messer Griesheim welding machine Unitig GW 300 with torch earth cable direct alternating current Cgoljugv S Ssq St H Hst