Condition: used, Trumpf TRUMPF TruDisk 4002 (4 C) High-Performance Solid-State Disk Laser with up to 4 kW Output Type: TruDisk 4002 (4 C) The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution – ideal for industrial manufacturing environments with demanding requirements for quality, precision, and automation. The combination of high power, excellent beam quality, and smart factory features makes it particularly attractive for modern production lines. System type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: May 2012 Drawing number: 20-10-02-A3* No additional tests were carried out in-house. Operating hours could not be read out. The laser operated flawlessly until decommissioning. Technical features: Output & wavelength: 80–4000 W at 1030 nm Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad, depending on configuration) Modular & compact: footprint < 1 m², modular design simplifies maintenance/service Gedozii Nqopfx Af Ssiw Efficient energy & cooling systems: energy-saving modes, active power factor correction, pulse function to reduce consumption Flexible cooling: integrated heat exchanger (5–28 °C), optional with compressor (up to 38 °C inlet temperature) Reflection-resistant: special resonator design also suitable for highly reflective metals Industry 4.0 capable: extensive sensor technology and data interfaces for condition monitoring, OPC UA, predictive maintenance Application areas: Scanner & hybrid welding (e.g. automotive body manufacturing, shipbuilding) High-speed cutting, including on reflective metals Flame cutting & surface processing Laser cladding, hardening, deep penetration welding where high precision is required Technical data: Supply voltage: 380 V (-10%) to 460 V (+10%), 3AC + PE Frequency: 50 – 60 Hz Power consumption: 23 kW / 25 kVA Rated current: 34 A at 400 V Protection rating: IP 54 Short-circuit strength: Icn / SCCR 50 kA Weight: 850 kg Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) We would be happy to answer any further questions by phone.

Condition: used, Trumpf TRUMPF TruDisk 6602 (4C) High-Power Disk Laser with up to 6.6 kW Type: TruDisk 6602 (4C) The TRUMPF TruDisk 6602 (4C) is a high-performance disk laser offering approximately 6.6 kW of continuous power output – perfectly suited for welding, cutting, and surface treatment processes for metals such as steel, aluminum, copper, etc. System type: TruDisk 6602 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: November 2012 Drawing number: 20-10-02-A5 No further in-house inspection has been performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. Key Technical Features: • Power: Continuously adjustable from 80 W up to 6,600 W, max. 6.6 kW for machine tool applications • Beam quality: < 2 mm·mrad for excellent focus handling • Wavelength: 1030 nm (infrared), adaptable to green wavelength for specific models • Output options: Up to 4 laser outputs (4C) for simultaneous supply of multiple process cells • Cooling system: Integrated heat exchanger (up to 28°C inlet temperature), optional compressor cooling (up to 38°C) • Modular and service-friendly: Compact footprint (< 1 m²), modular components for fast maintenance and service Benefits & Applications • Maximum process stability: Real-time power regulation ensures reproducible results • Reflection resistance: Patented resonator design enables welding of reflective metals such as copper and aluminum • Industry 4.0 ready: Sensor-integrated monitoring system, OPC-UA interface for condition monitoring & predictive maintenance • Energy efficiency: Up to 50% reduction in power consumption thanks to intelligent pulse control and energy-saving modes Giodpfx Afozii D Is Sow • Versatility: Application range includes welding (including BrightLine for nearly spatter-free seams), cutting, hardening, casting processing, additive manufacturing, laser wire deposition welding, and more Suitable Use Cases: Ideally suited for industrial high-power laser applications: Application | Features ---|--- Automotive structural part manufacturing | Deep penetration welding with high reproducibility Copper welding | Particularly suitable with green wavelength (> 95% spatter reduction) Remote hybrid welding | Fast processing of large surfaces with robust beam Additive manufacturing & hardening | Enabled by excellent beam quality and compact design Main Technical Data Property | Specification ---|--- Laser power | Up to 6,600 W (6.6 kW), continuous Beam quality | < 2 mm·mrad Wavelength | 1030 nm (infrared) Number of outputs (4C) | Up to 4 simultaneously usable fiber outputs Fiber connector diameter | 100–600 µm (depending on configuration) Beam delivery | Fiber-based, passive (no deflection mirrors required) Cooling | Water/air-cooled, internal or external chiller Dimensions | Approx. 1000 × 800 × 2100 mm (W×D×H, variant-dependent) Weight | ~800–1200 kg (excluding cooling) Power supply | 380 V - 10% ... 460 V +10%, 3-phase AC + PE, 38 kW / 41 kVA, 59 A / 400 V, 50–60 Hz Control | TruControl 1000/3000, OPC-UA interface Safety standards | Laser safety class 4 according to EN 60825-1 Weight: approx. 1200 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data. Information may be subject to alteration!) We are happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 910718, 1 Cloos workpiece positioning unit, consisting of a swiveling and rotating device with a protective screen in the center of the table. Center distance 2x2m, center height 1300mm, 180° swiveling unit, type GR502, motorized. Two rotating devices with opposing bearings are mounted on the platform of the rotary table. The drive side of the rotating device is designed as in type WPV-DP-5000 N. Load capacity per rotating device approx. 500 kg. Previously mounted on a Cloos welding robot ROMAT 76 S with Rotrol control, manufactured in 1990. Gjdozkvaropfx Af Soiw No exchange, return, or warranty possible.

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser source manufacturer: Maxphotonics, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, Why still bother with the cut quality of fine plasma systems? Why still waste valuable space in your workshop with a rotary table? Why still spend thousands of euros each year on expensive plasma wear parts? In addition to the obvious advantages of modern fiber laser technology regarding precision and virtually burr-free laser cut quality, laser cutting is surprisingly cost-effective. At the same time, laser cutting is much easier to operate than plasma cutting systems. And the best part is that we, Schmidt & partners Cutting, support your system from our two service centers throughout its entire service life. We are a reliable partner in the cutting world, providing perfect consulting, installation, training, maintenance, and repair services. We support you with our know-how and experience, including cutting parameters for special materials. We also gladly assist you with the implementation of this technology in your company, particularly with regard to the specific occupational safety aspects of laser technology. kaitec FIBER Pro HGLQ 3015 Cutting area 1,500 x 3,000 mm Max. sheet thickness 35 mm (depending on the laser source power) Laser systems 2kW / 3kW / 4kW / 6kW / 12kW Maxphotonics series (in cooperation with AK Industry GmbH, the certified service partner in Germany) Godpozkuu Iefx Af Seiw CE certified, risk assessment completed Do you not yet have a suitable filter system? We will gladly select the appropriate filter system to meet your needs. We look forward to hearing from you!

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: 2331 280, We sell a used Bolte Pro I-2200 stud welding unit with microprocessor control. MFG 2023, serial number: 2331 280 The trolley version of the PRO-I 2200, with two large, extremely robust wheels and a telescopic handle, is ideal for mobile use on construction sites. Technical features and advantages: Excellent welding quality – modern inverter technology ensures very precise control and high reproducibility of the welding process Very high arc stability – also in cases of short welding times and low welding currents Powerful – high welding current of 1050 A for a maximum welding diameter of 13 mm Fast welding sequences through innovative cooling concept Ideal for mobile use – considerably less weight than conventional stud welding units Robust construction for use in harsh environments Low energy consumption due to high efficiency Easy operation via a very robust rotary pressure switch Microprocessor control All functions and parameters are displayed on a large display (display contrast is adjustable) Welding program library Welding program storage – 59 Welding range: Ø 2-22 mm Welding current: 100-2100 A Welding method: studs with ceramic rings or shielding gas and short-cycle stud welding with or without shielding gas Welded materials: steel, stainless steel, aluminum Voltage: 320-495 V, 32 A, 50/60 Hz Power source: transformer/rectifier Welding time: 1-1500 ms, continuously adjustable Protection class: IP23 Dimensions (W x H x L) (mm): 550x850x650 mm Weight: 81 kg drawn arc stud welding gun GD 22 WMS is designed for welding shear connectors with large diameters (19 and 22 mm). Gisdpfey Tqwyex Af Sjw Welding range Ø 3-22 mm Welding material steel, stainless steel Stud length 10-525 mm Welding method (acc. to DIN EN ISO 14555) stud welding with ceramic ferrule, stud welding with shielding gas Lift 0-6 mm, adjustable (raster: 0,3 mm) Welding cable: 2 m, 95 mm², outside Control cable plug: 12-pin Dimensions (WxHxL): 68x180x295 mm Weight (without cable): 2,45 kg The new drawn arc stud welding gun GD 22 is designed for welding shear connectors with large diameters (19 and 22 mm). The ample-dimensioned adjustable lift (adjustment range: 0-6 mm) ensures in combination with the adjustable hydraulic piston damper optimum welding results in this diameter field. Of course, the new guns are suitable for welding through metal deck. The gun also features a piston with linear ball track, an automatic length compensation system for different stud lengths and surface conditions as well as a robust, impact resistant housing for the hard work on the construction site. The high-grade outside welding cable (cable cross section 95 mm²) accommodates the high welding currents that are necessary for large stud diameters. Optionally, the new guns can be equipped with integrated travel measuring system. Using this the lift adjustment couldn`t be easier. Moreover, it enables a quality monitoring by measuring and recording of stud protrusion before the weld as well as stud travel (lift, immersion depth, immersion speed and short-circuit time) during the weld. Price 9.100 Euro + VAT, negotiable, FCA Oradea, Romania Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 2025, number of axes: 7, This 7-axis FRONIUS TransSteel 4000 Pulse Welding Cell was manufactured in 2025. It features advanced Steel Transfer Technology and Pulse MIG/MAG capabilities. The system includes a Universal Robots UR10e cobot, a Siegmund welding table, and a Fumator Minivac 200D extraction unit. If you are looking to get high-quality welding capabilities, consider the FRONIUS TransSteel 4000 Pulse Welding Cell we have for sale. Contact us for further details. Gijdezic Elepfx Af Sew - Technology: Steel Transfer Technology / Pulse MIG/MAG- Cobot / Robot Brand: Universal Robots- Cobot / Robot Model: UR10e- Cobot Year of Manufacture: 2025- Welding Table Brand: Siegmund (Extreme 8.7 series, perforated grid pattern)- Extraction Unit Brand/Model: Fumator Absaugtechnik / Minivac 200D- Extraction Unit Controls: Start, Stop, Filter Reset, Suction Power Regulation- Included Documentation: German User Manual (UR10e) and Heidenbluth documentation binders- System Configuration: Robot mounted on a linear 7th-axis track system running alongside the welding table- Additional Equipment: Welding torch, hose packages, integrated cable carrier chain (energy chain), control cabinet with main switch, teach pendant, shielding gas cylinder rack

Condition: used, Year of construction: 2020, CNC gantry plasma cutting machine with skew rotator beveling unit Manufacturer: Messer Type: Multitherm 4000 Year of manufacture: 2020 CNC control: Global Control Plus Working area: 3 x 10.8 m Track width: 4,000 mm 1 oxy-fuel torch ALFA 1 plasma torch with skew rotator beveling unit Power source: Hypertherm XPR300 Cutting thickness: 50 mm piercing 80 mm cutting Beuting extraction table without filter system Software: Omniwin with Bevel ä2726 Giedpfx Afox Dlwms Sew

Condition: used, Year of construction: 2012, CNC laser cutting machine Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC control: iMSNC Windows Approximate laser operating hours: 4,000-5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Sheet thickness, steel (max.): 15 mm Sheet thickness, stainless steel (max.): 8 mm Sheet thickness, aluminum (max.): 8 mm Gedpfxex Eh Dre Af Soiw Operating temperature: +10 to +30 °C and max. 90% humidity (at 20° C) Extraction duct (left and right): Outlet on the left, diameter 250 mm Laser source: IPG Ytterbium laser system YLS 2.5 kW Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3P / 50 Hz Filter system: TEKA 4H 5.5 kW External dimensions of the complete system: approx. 10,400 x 3,610 mm 2726

Condition: used, Item: 5 units of ESS Thyrotig - Thyroplasma 250 (DC) TIG welding machines. TIG welding machines in need of repair. Year of manufacture: 1991 to 1994. Power: 250 amps = 60% duty cycle 195 amps = 100% duty cycle Type of current: DC Mains connection: 400 volts, 50 Hz, 32 amp plug - High-voltage ignition - 2-cycle and 4-cycle operation Giedpfjw Hhbiox Af Sjw - Water-cooled - Some components are missing - Without hose packages; scope of delivery as shown in the picture Space requirement L x W x H: 1200 x 570 x 920 mm Weight of 1 welding machine: 255 kg Weight of all 5 welding machines: 1,275 kg 3 welding machines are functional. 2 welding machines were stored as a source of spare parts. However, the devices are no longer tested and are being sold as needing repair.

Year of construction: 2008, condition: good (used), Laser machine TRUMPF TruLaser 3030 Control Sinumerik 840D Giedpfxeibmfge Af Sow Laser type TLF 4000 Laser power 4000 Movement X 3000 mm Movement Y 1500 mm Movement Z 115 mm X speed max. 60 m/min Y speed max. 60 m/min Laser on: 61535 h, beam on: 32220 h Max. thickness MS 20 mm Max. workpiece weight 720 kg Max. thickness SS 15 mm Max. thickness Al 10 mm The machine is in good condition. The machine will be available in December 2022.

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, overall weight: 135 kg, filter area: 10 m², suction capacity: 1,000 m³/h, negative pressure: 2,900 Pa, Welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter KEMPER. For welding, grinding, and all types of dry dust. Godpfx Afoyz Rt Ds Sjiw The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency of the unit. Model: Filter-Cell XL Year of manufacture - 7/2015 Fan power 1.5 kW. Airflow 1000 m3/h Vacuum 2900 Pa Cartridge filter element. Stock no. - 1128 1/2

Condition: used, Year of construction: 2008, type of input current: three-phase, filter area: 10 m², suction capacity: 1,000 m³/h, negative pressure: 3,000 Pa, arm reach: 3,000 mm, Mobile welding fume extractor, dust extraction unit, self-cleaning filter, pneumatic, vacuum type KEMPER. Suitable for welding, grinding, and all types of dry dust. Giedpfsymkq Sex Af Sew The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high efficiency of the device. Model: Filter-master XL Fan power: 1.5 kW Airflow: 1000 m3/h Vacuum: 3000 Pa Cartridge filter element. Stock no.: 1110

Condition: used, filter area: 42 m², suction capacity: 1,750 m³/h, Suitable for welding, grinding, sandblasting, and all types of dry dust. The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high device efficiency. Gjdpfey Hhcaex Af Sjiw Fan power: 1.1 kW – single-phase Capacity: 1,750 m3/h Large filtration area – 42 m2 HEPA filter for precise air purification Mechanical spark arrester Stock no.: 1118

Condition: used, Year of construction: 2000, filter area: 15 m², suction capacity: 1,400 m³/h, Welding fume extraction, dust extraction, self-cleaning, pneumatic, vacuum filter by Plymovent. Model: M1 "The MobilONE" Godpfx Ajv Hzdxef Sjiw For welding, grinding, sandblasting and all types of dry dust. Cartridge filter insert. Filter cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Year of manufacture: 2000 Fan with a power of 1.1 kW - single-phase Efficiency 1400 m3/h Filtration area 15 m2 arm length 3 m stock no.: 0965

Condition: ready for operation (used), Year of construction: 2021, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, controller manufacturer: MicroStep, controller model: iMSNC, number of axes: 3, This 3-axis MicroStep 3001.15P/ME plasma cutting machine was manufactured in 2021. It features a working area of 1500x3000mm, ideal for precise and large-scale cutting tasks. If you are looking to get high-quality cutting capabilities, consider the MicroStep 3001.15P/ME machine we have for sale. Contact us for more information. MasterCut Compact 3001.15P/Me Approx. 3,000 x 1,500 mm Sturdy construction Up to 100 mm material thickness High-quality linear guides and backlash-free drive on both sides Digital, maintenance-free AC servos with IRC Up to 40,000 mm/min IRC 2500 (incremental encoder) • Permissible plate thickness: stable construction up to 100 mm material thickness • Guides/Drives: high-quality linear guides and double-sided clearance-free drive • Axis control: digital, maintenance-free AC servos with IRC • Positioning speed: up to 40,000 mm/min Giodpfx Ajycvq Asf Sew • Measuring system: IRC 2500 (incremental encoder) • CNC control: MicroStep iMSNC with integrated network card • Plasma power source: Hypertherm XPR170 • Gas console: automatic Core gas console • Table surface: grid cover in the cutting table • Height control: "THC" module for automatic height regulation via arc voltage • Marking unit: "MicroPunch" needle marking unit • Safety features: double-sided rope safety system (collision protection) for the gantry via Emergency Stop • Visual signaling: 2-color LED signal tower on the gantry bridge • Operation interface: externally standing MMI console • Connectivity: USB 3.0 port for storage media • Software: AsperWin Basic (2D programming) and AsperWin Nesting (automatic nesting)

Condition: good (used), - Capacity 100 kVA - Pneumatic - Throat depth 570 mm Giodpfsykcnqsx Af Ssw - 380 V

Condition: used, Year of construction: 2012, functionality: fully functional, MBM ASAS ME Pump cleaning system for Abrasve Waterjet machines Used - construction Year 2012 Gedpfx Aozh U Naef Sjiw

Condition: ready for operation (used), Year of construction: 2016, operating hours: 3,830 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, number of axes: 3, This 3-axis AJAN PP16011 Auto plasma cutting machine was manufactured in 2016. It features a cutting area of 2000 x 3000 mm and can handle a maximum cutting thickness of up to 30 mm. The machine is equipped with a fume extraction and filtration system, ensuring a cleaner working environment. If you are looking to get high-quality plasma cutting capabilities, consider the AJAN PP16011 Auto machine we have for sale. Contact us for further details. • Condition: Very good, fully functional • Working hours: 3830 h • Machine under power: Yes • Cutting system: CNC plasma / oxy cutting Giedpezh U E Usfx Af Sow • Plasma generator: PP130A (included) • Max cutting thickness: up to 30 mm • Machine parameters: • Installed power: 4 kW • Power supply: 400 V / 3 PH / 50 Hz • Input current: 6 A • Plasma generator parameters (PP130A): • Max power consumption: 26 kW • Power supply: 400 V / 3 PH / 50 Hz • Max input current: 40 A • Weight: 520 kg • Documentation included: user manual, operation manual, technical documentation

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: A32404019520, type of input current: three-phase, input voltage: 230 V, overall weight: 53 kg, type of cooling: air, laser power: 1,500 W, shaft length: 1,080 mm, continuous power: 1,500 kW (2,039.43 HP), Equipment: documentation/manual, head guard, type plate available, Operation - Simplest operation via synergy characteristic curves - Achieve finished welding results in just three steps. Automatic adjustment of power, wire feed, oscillation width, oscillation frequency, laser frequency, PWM, hot start, etc. - High-resolution display ensures optimal readability of all necessary parameters. An integrated help function provides a better understanding of the adjustment options - Fully integrated operation in the wire feed cabinet – optional operation via machine or wire feed system Technical Features - High-performance laser cells paired with gas-cooled torches ensure maximum power and focus stability - 2-in-1 machine: Welding and cleaning. Laser cleaning is ideal for paint removal, rust removal, and scale removal - Optional: Dual wire feed Safety - Two-channel emergency stop system - Two-channel safety interface for access control (door contact switch) - Key switch to prevent unauthorized use - Two-channel fiber break detection as well as monitored QBH connection - Safety notices and manual activation of laser release at every start - Dual-action button prevents unintentional activation of the laser - Suitable for heavy-duty applications Advantages of Laser Welding Compared to Conventional Welding Methods - Minimal distortion, extremely fast, outstanding quality (even with very thin materials < 1 mm) - Consumes approximately 70% less energy - Quick and easy to learn - High process reliability - Extreme time savings with significantly reduced rework - One of the lightest torches on the market, weighing approx. 680 g - Two-channel safety circuit for maximum safety Gisdeyuvktepfx Af Ssw Advantages of Craft-Laser - Laser cleaning with up to 100 mm scanning width and autofocus - 2-in-1 machine: welding and cleaning - Full synergy – no more parameter lists - Service-friendly – no more inconvenient shipping required

Condition: like new (used), Year of construction: 2024, functionality: fully functional, type of input current: AC, total height: 680 mm, total width: 340 mm, total length: 680 mm, input voltage: 230 V, overall weight: 38 kg, type of cooling: air, electrical fuse: 16 A, laser power: 800 W, shaft length: 1,080 mm, continuous power: 800 kW (1,087.70 HP), Equipment: documentation/manual, head guard, Operation - Simplest operation via synergy characteristic curves - Achieve a finished weld in just three steps. Automatic adjustment of power, wire feed, oscillation width, oscillation frequency, laser frequency, PWM, hotstart, etc. - High-resolution display ensures optimal readability of all necessary parameters. An integrated help function provides better understanding of setting options - Fully integrated operation in the wire feeder case – operation via the machine or wire feeder selectable Technical Features - 20µm single-mode laser source - High-performance laser cells paired with gas-cooled torches provide maximum power and focus stability - 2-in-1 machine: welding and cleaning: laser cleaning is ideal for paint removal, rust removal, and scale removal - Optional: dual wire feed Safety Gijdjyuvqmepfx Af Sow - Dual-channel emergency stop system - Dual-channel safety interface for access control (door contact switch) - Key switch to prevent unauthorized use - Dual-channel fiber break detection and monitored QBH connection - Safety notices and manual activation of the laser release at every start - Dual-action pushbuttons prevent unintentional laser activation - Suitable for heavy-duty applications Advantages of Laser Welding Compared to Conventional Welding Processes - Hardly any distortion, incredibly fast, and outstanding quality (even on extremely thin materials < 1 mm) - Uses approximately 70% less energy - Fast and easy to learn - High process reliability - Extreme time savings with significantly reduced rework - One of the lightest torches on the market at approx. 680 g - Dual-channel safety loop for maximum safety Advantages of Craft-Laser - Laser cleaning with up to 100 mm scanning width and autofocus - 2-in-1 machine: welding and cleaning - Full synergy – no more parameter lists - Service-friendly – no more tedious shipping

Condition: used, Automatic lattice girder welding line TE 30 S made by EUROLLS Model : TE 30 S Maximum stacking height : 500 mm Wire diameter - Upper current (ds -smooth or barbed) : From 4 to 12 mm - Lower current (di- smooth or barbed) : From 4 to 12 mm - Diagonal wire (dg- smooth or barbed) : From 3 to 8 mm Diagonal pitch (P) : 200 mm Gijdpjvtqacjfx Af Sjw Beam pitch : 400 mm Maximum speed with hot and cold drawn wire : Max 30 m/min Maximum spool weight in feed : 3000 kg Machine type: TE 30 S Maximum stacking height: 500 mm Wire diameter Upper current (ds -smooth or barbed): From 4 to 12 mm Wire diameter Lower current (di- smooth or barbed): From 4 to 12 mm Wire diameter Diagonal wire (dg- smooth or barbed): From 3 to 8 mm Diagonal pitch (P): 200 mm Beam pitch: 400 mm Maximum speed with hot and cold drawn wire: Max 30 m/min Maximum spool weight in feed: 3000 kg

Condition: used, Oscillator tubes (triodes) for HF Welders : Gjdpfx Aovtp Husf Sjiw - BW 1608J2F-R, made E.E.V. : NEW - BW 1185J2, made E.E.V :

Condition: used, table length 2400 mm table width 1200 mm table height 200 mm bore 28 mm 100 x 100 mm material thickness ca. 24,5 - 27 mm 200 mm work height max. 850 mm Weight 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. Gsdpfx Aezh N Udof Soiw >. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, Easier and more efficient entry into automated welding Automated arc welding cell for small and medium production runs – easy to operate and highly productive The welding cell impresses with its particularly simple operation and programming. With minimal training required, you can put the machine into operation, program it, and operate it; video tutorials are sufficient. Depending on the component and batch size, you can use the welding cell in a 1- or 2-station operation. For example, you can process either a larger component or smaller components in larger series in parallel. You will receive the system without a safety enclosure or as a fully equipped machine tool, TÜV-tested and with CE certification. This also includes extraction, an enclosure with glare protection, and safety technology according to TRUMPF standards. Giodpfxozh I Hxs Af Sjw Technical details + equipment: Base model price from: €103,800 (without safety enclosure) Includes: 6-axis, collaborative industrial robot arm for easy programming Teach pendant with graphical user interface on a 12" touchscreen TRUMPF operating plugin for welding with predefined welding parameters for easy, direct programming on the robot Training & Services: Operator course Installation course 12 months warranty Remote service agreement in the first year TRUMPF quality All over the world, our fast remote service support takes care of your needs. You can find more technical data in the data sheet or on our website. If you have any questions, please do not hesitate to contact us. About TRUMPF: In our company’s history of over 100 years, we have been involved in the design of many thousands of sheet metal fabrications in Germany alone. We pass this experience on to our customers every day. With innovative machines and functions, the most comprehensive service concept on the market, and experts in software, automation, and smart factories, you will always receive a customized offer tailored to your requirements. P.S.: We would also be happy to support you with financing. With the financing, leasing, or pay-per-use models of TRUMPF Financial Services, we are there to assist you with financial and entrepreneurial challenges.

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, total height: 4,100 mm, total width: 5,800 mm, overall weight: 2,100 kg, product length (max.): 7,500 mm, number of axes: 3, This 3-axis CMS Smartline 2040 waterjet cutting machine was manufactured in 2023. It features an impressive X-axis stroke of 4,000 mm, Y-axis stroke of 2,000 mm, and a maximum cutting thickness of up to 220 mm. The machine includes a robust worktable size of approximately 4,150 × 2,080 mm and is equipped with a high-pressure intensifier pump. If you are looking to get high-quality cutting capabilities, consider the CMS Smartline 2040 machine we have for sale. Contact us for further details. • Max worktable size: approx. 4,150 × 2,080 mm • Cutting system • Technology: Abrasive waterjet • Cutting head: 3-axis waterjet cutting head (CMS Tecnoucut) • Max cutting thickness: up to 220 mm (material dependent) • Interpolated CNC cutting for complex shapes • Automatic Z height control • Axes and motion • CNC controlled axes: X, Y, Z • Motors: Brushless • Guides: Recirculating ball linear guides • Drive system: Rack & pinion (X/Y), ball screw (Z) • Positioning accuracy: ±0.05 mm • Repeatability: ±0.03 mm • Waterjet pressure system • Maximum working pressure: approx. 4,150 bar (60,000 psi) • Pump power: approx. 22.5 kW • Note: High-pressure intensifier pump 30 CP included; see Additional equipment Gjdezh Itxepfx Af Soiw • Control and software • CNC control: OSAI Open • HMI: CMS Active interface • CAD/CAM: EasyCut / EasyPump compatible • Touchscreen control panel on mobile stand • Worktable and load • Material support: Steel grid table • Max table load: approx. 500 kg/m² • Electrical and utilities • Power supply: 400 V / 50 Hz / 3-phase • Installed power: approx. 35–40 kVA (configuration dependent) • Protection class: IP54 (control cabinet) • Safety and equipment • Safety guards and photoelectric barriers • Automatic lubrication system (X, Y, Z) • Collision detection system for cutting head • Laser pointer for zero-point setting • Electrical cabinet and control console Additional equipment • High-pressure intensifier pump (30 CP) • Abrasive feeding system (270 kg capacity) • Air compressor