Year of construction: 1994, Condition: ready for operation (used), Motor power: 37kW, rotor diameter: 500mm, rotor width: 790mm, cross-section: approx. 500mm/790mm, stator blades: 2-row, rotor: 6 blades left and right. Including cyclone, pipes, blower, 3 sets of knives and sieves with a diameter of 6mm/8mm/10mm. Grinding capacity: 6 sieve: 150kg/h, 8 sieve: 300kg/h, 10 sieve: 400kg/h. Documentation available. On-site inspection is possible. Cslitdeui R Rcsx Njrb

Condition: ready for operation (used), Year of construction: 2007, Orwak 3100 (2nd hand machine) Condition: serviced, ready for operating Baler was only used indoors. Number of machines available: 1 Technical data: Pressing force: 3 Ton Motor: 0.75 kW Power supply: 220-230 V (1 phase) Machine size (H x W x D): 1990 x 826 x 693 mm Transport height: 1990 mm Machine weight: 338 kg Bale: Bale size (H x W x D): 600 x 700 x 500 mm Bale weight up to: 60 kg Strapping: 2x PP-straps Loading aperture: Loading aperture (H x W): 400 x 700 mm Csloh Nglmeitdx Norb Optional extra: BTS-WG30 Strapping for Waste Baler Bale Trolley Freight cost on request.

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. Crolitdxsvq Rtks Nsb The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Year of construction: 1992, Condition: good (used), Extraction system, make KELLER LUFT-TECHNIK Type: UNI-STAR X-SL, year of manufacture 1992 Motor 3.3 KW Max. air volume flow/h 2,300 Filter area 30 m2 8 cartridge filters are installed. Dimensions 0.9mX1mX3.5m, weight approx. 1000 kg. Colitdxsi E Td Hs Njrb Ready for use in good condition.

Year of construction: 2006, Condition: excellent (used), machine/vehicle number: 24591, Throughput approx.: 2 - 5 m³/h Crelitedxmd Uedx Njb Filling and material outlet opening: 300 mm Ø space requirement (built up, with bridge): 1400 x 1200 x 2200 mm

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT40150 Main motor power: 90 kW Hydraulic system motor power: 5.5 kW Working rotor length: 1500 mm Rotor diameter: 400 mm Crjleq Sp Ekjitdx Njb Number of movable knives on the rotor: 94 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, the possibility of mounting a second row of fixed knives (upper) depending on the processed waste Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Year of construction: 1995, Condition: ready for operation (used), A Big Komet 12 press is available. Pressing force: 120kN, dimensions X/Y/Z: approx. 4000mm/1100mm/1100mm, weight: approx. 5000kg. Crelitotva Dgsdx Neb

Condition: ready for operation (used), We sell functional Wagner overbelt solenoid separators, Overbelt magnet, electromagnet, electric overbelt magnet. For the separation of magnetic parts Creloncbn Tjitdx Njb Block width 1200x block depth 950 mm Optimal for conveyor belt width approx. 1000 mm Function can be demonstrated by arrangement Belt as good as new With frame and adjustment spindles With rectifier Year of manufacture approx. 1990

Condition: new, Year of construction: 2024, Functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.22KW Crjlsd Dy S Reitdx Nsb Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Condition: good (used), Motor: 2.2 kW Extraction capacity: 1800 m3/h Celoq U Rbqoitdx Norb

Condition: as good as new (ex-display), Codition : Unused, year 2019 Brand : Rotodyne Asselbergs Type : CV-1120/900-D16 Weight : 1450 kilograms All employees speak Dutch, German and English Prices are exclusive of VAT Cjlevxlw Tsitdx Nsrb Shipping is possible (surcharge) (Changes and errors in the technical data, information and Prices and prior sale reserved

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT3080 Main motor power: 30 kW Hydraulic system motor power: 2.2 kW Working rotor length: 800 mm Rotor diameter: 300 mm Number of movable knives on the rotor: 46 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece Hydraulic system equipped with an oil cooling system External bearing The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines Colitjq Sp Htsdx Nsrb

Condition: ready for operation (used), Year of construction: 2004, One shredder is available, blade width: 3x 46mm, power: 30kW. Crsleh A Rqusitdx Neb

Year of construction: 1985, Condition: like new (used), We are selling a new permanent magnetic drum, magnetic separator, magnetic drum Drum width approx. 400, drum diameter approx. 300 mm With closed housing, adjustable apex, drive motor Crolitoncbpiedx Nsb For iron separation, Fe separator, separation of magnetic particles

Condition: ready for operation (used), Functionality: fully functional, overall weight: 15,500 kg, Year of construction: 2003, operating hours: 100,000 h, machine/vehicle number: Q- 03007, Recycling plant for dry, clean plastic film scrap including head waste. Output up to 250 kg/h. It is in operation now and in good working condition. Crelitovxlu Sodx Njb

Condition: ready for operation (used), Year of construction: 2018, operating hours: 5,300 h, Pronar screening machine 20.55 Crslitovxiz Ajdx Nsb Year of manufacture 20.55 5300 operating hours

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,400 h, Functionality: fully functional, machine/vehicle number: C0044196115-3107, total height: 3,500 mm, total width: 3,000 mm, total length: 7,000 mm, overall weight: 38,000 kg, rotor diameter: 1,200 mm, number of blades: 10, year of last overhaul: 2025, METSO TRACKED CRUSHER TYPE MJ4000-10 year 2016 CAT C15 TIER IV F ENGINE, 2X10 SAMURAI KNIVES TABLE, OVERBAND Crjlitdxevxivgo Njb RADIO CONTROLLED EVOLUTIVE HOUR METER MAX GRANULOMETRY 300 mm NEW HYDROLICAL PUMP

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT40150 Main motor power: 90 kW Hydraulic system motor power: 5.5 kW Working rotor length: 1500 mm Rotor diameter: 400 mm Number of movable knives on the rotor: 94 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, the possibility of mounting a second row of fixed knives (upper) depending on the processed waste Top-loading section widened to facilitate feeding waste into the shredder Cjlijq Sp Evstdx Njrb Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Year of construction: 2020, Condition: ready for operation (used), Six (6) identical pneumatic knife-gate valves Watergates are available. Housing: stainless steel, valve blade: stainless steel, max. operating pressure: 4bar, medium temperature range: -35°C-120°C, machine length: approx. 1873mm, machine diameter: approx. 382mm, weight: approx. 280kg. Documentation available. On-site inspection is possible. Crslitjugmwledx Neb

Year of construction: 2010, Condition: excellent (used), Various sieves / perforated plate mostly unused For Alpine granulators type 63/100 Ro and type 80/100 Ro e.g. for 80/100Ro 11 pieces 2 mm round hole 19 pieces 2,5 mm round hole 29 pieces 3 mm round hole 15 pieces 3.5 mm round hole + various different perforations 5mm round hole, 6 mm square, 3mm round hole for 63/100 + many other sizes, just ask us for your desired size Crelisd Shklstdx Njb

Condition: like new (used), Year of construction: 2008, Functionality: fully functional, WEIMA WLK 6 S chipper Crusher made by German company WEIMA - overhauled - year of production 2008 - documentation - NEW KNIGES Csliterwl I Rsdx Nerb TECHNICAL PARAMETERS: hopper dimension 800 x 2100 mm rotor diameter 315 mm rotor length 800 mm rotor rotation 90 rpm V-rotor main motor 37 kW number of knives 42 pieces rotating cutting knives 40 mm x 40 mm sieve fi 12 mm and 15 mm AUTOREWERS HYDRAULIC DRAWER height of pressing drawer 275 mm diameter of spigot fi 200 mm overall dimensions of the machine (length / width / height) 250 / 180 / 170 cm weight 1700 kg

Year of construction: 2015, operating hours: 8,500 h, Condition: ready for operation (used), Drum screening system with various drum sizes. Crelitdxjvw T Epj Nob

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WTF40120 Main engine power: 75 kW Hydraulic system motor power: 5 kW Working rotor length: 800 mm Rotor diameter: 400mm Number of movable knives: 81 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, the possibility of mounting a second row of fixed knives (upper) depending on the processed waste Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen assisted by two actuators Crslitdoq Sp Hdex Njb The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT3080 Main motor power: 30 kW Hydraulic system motor power: 2.2 kW Working rotor length: 800 mm Rotor diameter: 300 mm Number of movable knives on the rotor: 46 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece Hydraulic system equipped with an oil cooling system External bearing The machine is available at our warehouse in Częstochowa. Crelijq Sp Hpstdx Nsb Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WTF40120 Main engine power: 75 kW Hydraulic system motor power: 5.5 kW Working rotor length: 800 mm Rotor diameter: 400mm Cjlieq Sp Haotdx Norb Number of movable knives: 81 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, the possibility of mounting a second row of fixed knives (upper) depending on the processed waste Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines